Influence of additives in the end‐use mixes of tebufenozide on deposition,adhesion and persistence in spruce foliage

Abstract

A commercial flowable formulation of tebufenozide, RH‐5992 2F [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyl) hydrazine], was diluted with water, water and canola oil, and water and the methyl ester of canola oil, to provide six end‐use mixes with concentrations of 35 and 70 g of active ingredient (Al) litre^‐1. The mixes were applied at 70 and 140 g Al ha^‐1 over white spruce [Picea glauca (Moench) Voss] seedlings in a laboratory spray chamber and foliar concentrations of tebufenozide were determined over a 60‐d period. At intervals of time post‐spray, seedlings were sprayed with monosized droplets of Sunspray®11N as rainfall, and the amount of tebufenozide knocked off from foliage was determined. The potential energy of adhesion (PEA) of the Al particles on the foliage increased with time and varied according to the type of end‐use mix, its viscosity and the dosage sprayed.

The end‐use mixes were applied over white spruce trees under field conditions and persistence of tebufenozide was investigated. DT₅₀ values were influenced by the type of mix and dosage sprayed. Oil‐containing mixes and higher dosages increased the PEA of tebufenozide particles.     

Rain‐washing of mimic®, RH‐5992, from balsam fir foliage following application of two formulations

Abstract

Two formulation concentrates of the insecticide, RH‐5992 [N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyI) hydrazine], an aqueous flowable (2F) and an emulsion‐suspension (ES), were diluted with water to provide spray mixes containing dosage rates ranging from 35 to 150 g of the active ingredient (AI)/ha. The mixes were sprayed in a laboratory chamber, onto balsam fir branch tips collected from field trees and greenhouse‐grown seedlings. Droplet spectra and spray mass recovery were determined on artificial samplers. Simulated rainfall of two different intensities was applied at different rain‐free periods, and rain droplet sizes were determined. Foliar washoff of RH‐5992 was assessed after application of different amounts of rain, and the increase in soil residues was evaluated.

A direct relationship was indicated between the amount of rainfall and RH‐5992 washoff. The larger the rain droplet size, the greater the amount washed off. Longer rain‐free periods made the deposits more resistant to rain. Regardless of the amount of rainfall, rain droplet size and rain‐free period, foliar deposits of the 2F formulation were washed off to a greater extent than the ES formulation. The increase in soil residues due to foliar washoff was greater for the 2F than for the ES formulation. The deposits of the emulsion‐suspension were consistently more resistant to rain‐washing than those of the aqueous flowable formulation.     

Adsorption behavior of RH‐5992 insecticide onto sandy and clay loam forest soils

Abstract

Adsorption‐desorption behavior of RH‐5992 [Mimic®, N'‐t‐butyl‐N'‐(3,5‐dimethylbenzoyl)‐N‐(4‐ethylbenzoyl) hydrazine] in sandy and clay loam forest soils was studied using the batch equilibrium method. Adsorption was higher in the clay loam soil than in the sandy loam, and increased linearly with RH‐5992 concentration, but decreased with increasing pH and temperature. The adsorption data fit better to the Freundlich, than to the Langmuir equation. The K_D (linear adsorption constant) and K_F (Freundlich constant) were similar for each soil at 5, 15 and 25°C and decreased with increase of temperature, indicating that the enthalpy of adsorption was negative. The exponent of the Freundlich equation was close to unity for both soils at all three temperatures. The low E_a (energy of activation) indicated a diffusion‐controlled process during the initial stages of adsorption. The desorption isotherm differed from that of adsorption, and the linear desorption constant, K_D(d), was ca 25 times higher than the K_D, indicating that adsorption of RH‐5992 was not readily reversible. Evaluation of thermo‐dynamic parameters confirmed the presence of strong bonds between the solute and soil. These findings suggest that RH‐5992 has a limited potential for downward mobility leading to groundwater contamination.     

Persistence of Bacillus thuringiensis deposits in a hardwood forest,after aerial application of a commercial formulation at two dosage rates

Abstract

A commercial formulation of Bacillus thuringiensis Berliner var. kurstaki (BTK), Foray® 48B, was sprayed aerially over four blocks B13, B14, B15A and B15B in an oak forest in Wayne County, Pennsylvania during May 1990. B13 and B14 were sprayed at 75 billion international units (BIU) in 5.91 litres/ha and the other two at 50 BIU in 3.94 litres/ha. Oak foliage was collected at different intervals of time after treatment. Three types of bioassays were conducted against fourth instar gypsy moth larvae, viz., direct feeding of sprayed foliage, feeding on diet containing homogenized foliage, and force‐feeding of foliar extracts. Larval mortalities were converted into international units of BTK activity per unit area (IU/cm²) of foliage. Foliar extracts were also subjected to enzyme‐linked immunosorbent assay (ELISA) to determine the concentration of delta‐endotoxin protein. Regardless of the type of bioassay used, bioactivity of BTK persisted in foliage for about a week in all the blocks. The half‐life of inactivation, DT₅₀, ranged from ca 12 to 22 h. The immunoassay data indicated a shorter duration of persistence (i.e., about 2 d) of the delta‐endotoxin protein, with DT₅₀ values ranging from 10 to 15 h. Formulation ingredients present in Foray 48B played a role in the toxicity of BTK to gypsy moth larvae.     

Persistence of azadirachtin A and B in soil: Effects of temperature and microbial activity

Abstract

The persistence of two insecticidally active compounds from the neem tree, azadirachtin A and B, was determined at two different temperatures (15 and 25°C) in the laboratory after application of the commercial neem insecticide, Margosan‐O, to a sandy loam soil. The influence of microbial activity on degradation was also examined by comparing autoclaved and non‐autoclaved soils also at 15 and 25°C. Temperature influenced degradation rates. The DT ₅₀ (time required for 50% disappearance of the initial concentration) for azadirachtin A was 43.9 and 19.8 d for non‐autoclaved soil kept at 15 and 25°C, respectively. The DT ₅₀ for azadirachtin B was 59.2 and 20.8 d for non‐autoclaved soil kept at 15 and 25°C, respectively. Microbial activity was also responsible for faster degradation because DT ₅₀ ’s for autoclaved soil were much longer than for non‐autoclaved soils. DT ₅₀ ‘_s for azadirachtin A in autoclaved soil were 91.2 (15°C) and 31.5 d (25°C). DT50’s for azadirachtin B in autoclaved soil were 115.5 (15°C) and 42.3 d (25°C). Two degradation products of azadirachtin were detected, but were not identified. Higher levels of the two degradation products were detected in non‐autoclaved soil.     

Effect of tracer dyes on initial deposits and persistence of bacillus thuringiensis subsp. kurstaki toxin after application of two commercial formulations onto spruce trees

Abstract

The effect of two tracer dyes [Erio Acid Red (EAR) and Acid Black 48 (AB‐48)] on initial deposits and persistence of Bacillus thuringiensis subsp. kurstaki (Btk) toxin (delta‐endotoxin) was studied after spraying two commercial formulations, Foray® 48B and Foray® 76B, over potted white spruce [Picea glauca (Moench) Voss] seedlings, at a dosage rate of 30 billion international units (BIU) per ha. Spray was applied using a spinning disc atomizer calibrated to deliver droplet sizes similar to those utilized in ultra‐low‐volume (ULV) treatments in operational insect control programs. The sprayed seedlings were left outdoors at the Sault Ste. Marie laboratory for 18 days under natural conditions of sunlight, wind and rainfall. Initial deposits and persistence of delta‐endotoxin protein in spruce foliage were determined by immunoassay [enzyme linked immunosorbent assay (ELISA)] quantification of the delta‐endotoxin. The total protein (inactive plus active) and delta‐endotoxin (active protein) concentrations in the two formulations were determined by a gravimetric procedure and by ELISA respectively.

The initial deposit levels of the toxin on foliage were not markedly affected by the addition of either of the two tracer dyes, and showed only a narrow range of 1521 to 1625 ng/g foliage (fresh weight) for Foray 48B, and 1789 to 2056 ng/g for Foray 76B. However, the persistence of the toxin was significantly influenced by the presence of the dyes. The toxin persisted in foliage only for 7 d post‐spray When the EAR dye was added to Foray 48B, compared to 10 d when no dye was added. The average half‐life (DT₅₀) of disappearance was 17.4 h for Foray 48B with EAR, and 20.9 h when no dye was present. In contrast, the situation was reversed in Foray 76B, since the duration of persistence was 10 d when EAR was added to Foray 76B, compared to 7 d when no dye was added. The average DT₅₀ was 27.9 h for Foray 76B with EAR, and 22.2 h without the dye. Persistence was the longest (14 d) when the AB‐48 dye was added to Foray 76B, and the DT₅₀ was 44.9 h.     

Effect of additives in the Neem formulations on deposition,volatilization and persistence of Azadirachtin in spruce foliage

Abstract

Foliar deposits, volatilization and persistence of azadirachtin‐A (AZ‐A) were investigated after application of four spray mixes prepared from a wettable powder (WP) and three emulsifiable concentrate (EC) formulations of neem. They were applied at the dosage rate of 50 g AI in 4 L/ha onto potted spruce seedlings in a laboratory spray chamber. Droplet‐size spectra and deposits were assessed using Kromekote^® card/glass plate collection units. Foliar residues [dislodgeable residues (DR), penetrated residues (PR) and total residues (TR)] of AZ‐A and their volatilization were measured by HPLC at different intervals of time up to 60 h after treatment. Differences in the droplet‐size spectra and deposit levels were observed among the four spray mixes due to the influence of additives present in them. Dissipation half‐lives (DT₅₀) of the DR, PR and TR in the foliage were low (range, 19.5 to 38.9 h) and varied according to the residue type and the spray mix used. The DT₅₀ values of the DR were consistently lower (range, 19.5 to 31.9 h) than those of the PR (range, 30.5 to 38.9 h) due to preferential loss of the surface residues. The low DT₅₀ values observed for the DR and TR in the foliage sprayed with the WP spray mix were attributed to the particulate nature of the deposit. AZ‐A volatilized appreciably from the DR rather than from the PR. The variations found in the amounts of AZ‐A volatilized (42 to 58%) and unaccountable (38 to 46%) from the initial TR values in spruce foliage, after 60 h, were attributed to the physical form of the deposits on the target surface and the influences of additives present in the different spray mixes.     

Herbicide movement and dissipation at four midwestern sites

Abstract

This study was conducted to evaluate atrazine (2‐chloro‐4‐ethylamino‐6‐isopropyl‐1, 3, 5‐triazine) and alachlor (2‐chIoro‐N‐(methoxymethyl)acetamide) dissipation and movement to shallow aquifers across the Northern Sand Plains region of the United States. Sites were located at Minnesota on a Zimmerman fine sand, North Dakota on Hecla sandy loam, South Dakota on a Brandt silty clay loam, and Wisconsin on a Sparta sand. Herbicide concentrations were determined in soil samples taken to 90 cm four times during the growing season and water samples taken from the top one m of aquifer at least once every three months. Herbicides were detected to a depth of 30 cm in Sparta sand and 90 cm in all other soils. Some aquifer samples from each site contained atrazine with the highest concentration in the aquifer beneath the Sparta sand (1.28 μg L^‐1). Alachlor was detected only once in the aquifer at the SD site. The time to 50% atrazine dissipation (DT₅₀) in the top 15 cm of soil averaged about 21 d in Sparta and Zimmerman sands and more than 45 d for Brandt and Hecla soils. Atrazine DT₅₀ was correlated positively with % clay and organic carbon (OC), and negatively with % fine sand. Alachlor DT₅₀ ranged from 12 to 32 d for Zimmerman and Brandt soils, respectively, and was correlated negatively with % clay and OC and positively with % sand.     

Dissipation of chlorpyrifos,oxon, and 3,5,6‐trichloro‐2‐pyridinol in litter and elm forest soil

Abstract

After chlorpyrifos was applied to the basal 1 meter of elm tree trunks for control of elm bark beetles at two different application times and sites, initial chlorpyrifos residues in forest floor litter ranged from 120 to 916 μg/g depending on the application time. Residues dissipated by approximately 99% after 791 d with the DT₅₀ from 3.9 to 59 d and DT₉₀ from 55 to 310 d. The initial residues of chlorpyrifos in elm forest soil varied from 0.8 to 28 μg/g and were 1 to 2 μg/g at 791 d after application. The dissipation half‐lives of chlorpyrifos in fortified soil placed in the field ranged from 116 to 121 d.     

Persistence of granular and EC formulations of chlorpyrifos in a mineral and an organic soil incubated in open and closed containers

Abstract

Samples of a mineral soil (Plainfield sand) and an organic soil (muck) were treated with granular and EC formulations of chlorpyrifos and incubated at 27±1°C and 65±5% RH in open and closed containers. Duplicate samples of each soil‐formulation‐container combination were analyzed for residual chlorpyrifos during a 23 wk period. The disappearance rates observed demonstrate that the relative importance of formulation and containment on overall persistence depends on soil type. For the mineral soil, disappearance was slower from closed containers and formulation had only a slight effect while, in the organic soil the granular formulation disappeared slower than the EC and there was little difference between open and closed containers. The relative importance of degradation and volatilization in the disappearance of chlorpyrifos from soil is discussed.     

Modelling the dissipation kinetics of six commonly used pesticides in two contrasting soils of New Zealand

We used three non-linear bi-phasic models, bi-exponential (BEXP), first-order double exponential decay (FODED), and first-order two-compartment (FOTC), to fit the measured degradation data for six commonly used pesticides (atrazine, terbuthylazine, bromacil, diazinon, hexazinone and procymidone) in two New Zealand soils. Corresponding DT₅₀ and DT₉₀ values for each compound were numerically obtained and compared against those estimated by simple first-order kinetic (SFOK) model. All 3 non-linear models gave good fit of the measured data under both soil depths and were well supported by the values obtained for the respective statistical indices (RMSE, CRM and r ²). The FOTC model gave by far the best fit for most compounds, followed by the FODED and BEXP models. Overall, DT₅₀ values derived by non-linear models for the six compounds in soils from both sites were lower than the values obtained by the SFOK model. Differences in the SFOK and the three non-linear models derived DT₉₀were, however, an order of magnitude higher for some compounds, while for others differences were very small. Although all three non-linear models described most data by giving excellent fits, in a few instances > 5–10% asymptotes hindered the estimation of DT₉₀ values. This work shows that when degradation deviates from first-order kinetic, application of non-linear decay models to describe the kinetics of degradation becomes important in order to derive the true end-points for pesticides in soil.     

Effects of Soil Amendments at a Heavy Loading Rate Associated with Cover Crops as Green Manures on the Leaching of Nutrients and Heavy Metals from a Calcareous Soil

The potential risk of groundwater contamination by the excessive leaching of N, P and heavy metals from soils amended at heavy loading rates of biosolids, coal ash, N‐viro soil (1:1 mixture of coal ash and biosolids), yard waste compost and co‐compost (3:7 mixture of biosolids to yard wastes), and by soil incorporation of green manures of sunn hemp (Crotalaria juncea) and sorghum sudangrass (Sorghum bicolor × S. bicolor var. sudanense) was studied by collecting and analyzing leachates from pots of Krome very gravelly loam soil subjected to these treatments. The control consisted of Krome soil without any amendment. The loading rate was 205 g pot^? 1 for each amendment (equivalent to 50 t ha^? 1 of the dry weight), and the amounts of the cover crops incorporated into the soil in the pot were those that had been grown in it. A subtropical vegetable crop, okra (Abelmoschus esculentus L.), was grown after the soil amendments or cover crops had been incorporated into the soil. The results showed that the concentration of NO₃‐N in leachate from biosolids was significantly higher than in leachate from other treatments. The levels of heavy metals found in the leachates from all amended soils were so low, as to suggest these amendments may be used without risk of leaching dangerous amounts of these toxic elements. Nevertheless the level of heavy metals in leachate from coal ash amended soil was substantially greater than in leachates from the other treatments. The leguminous cover crop, sunn hemp, returned into the soil, increased the leachate NO₃‐N and inorganic P concentration significantly compared with the non‐legume, sorghum sudangrass. The results suggest that at heavy loading rates of soil amendments, leaching of NO₃ ^? could be a significant concern by application of biosolids. Leaching of inorganic P can be increased significantly by both co‐compost and biosolids, but decreased by coal ash and N‐viro soil by virtue of improved adsorption. The leguminous cover crop, sunn hemp, when incorporated into the soil, can cause the concentration of NO₃‐N to increase by about 7 fold, and that of inorganic P by about 23% over the non‐legume. Regarding the metals, biosolids, N‐viro soil and coal ash significantly increased Ca and Mg concentrations in leachates. Copper concentration in leachate was increased by application of biosolids, while Fe concentration in leachates was increased by biosolids, coal ash and co‐compost. The concentrations of Zn, Mo and Co in leachate were increased by application of coal ash. The concentrations of heavy metals in leachates were very low and unlikely to be harmful, although they were increased significantly by coal ash application.     

The effects of relative humidity on the insecticidal properties of a diatomite‐based dust

Abstract

The feasibility of using diatomaceous earth (diatomite) as an insecticidal dust was investigated under conditions of high (80%) and low (10%) relative humidity, using the adult red flour beetle, Tribolium castaneum. Tested were diatomite and two lots of a commercial formulation of the same diatomite, containing 0.2% pyrethrins and 1.0% piperonyl butoxide. For comparison, talcum and a talcum‐based commercial formulation, containing the same concentrations of pyrethrins and piperonyl butoxide, were included in the tests. The insects were exposed to 0.08 mg/cm² of each material tested, equivalent to the label recommendation of 7 lb/acre for the diatomite‐based commercial insecticide. At 10% RH, higher doses of diatomite were also tested. Mortalities were determined at intervals for up to 84 hours.

Diatomite caused no mortalities at the experimental concentration, regardless of RH. At about four times that rate and 10% RH, it caused less than 5% mortality.

At 80% RH, the diatomite‐based product (P. C. P. Act #14074) was significantly more effective than the talcum‐based one (#13074). At 10% RH, however, the latter acted more quickly than the diatomite‐based formulations, but all produced nearly 100% mortality after 68 hours.

The results are discussed in terms of the physical characteristics of diatomite and in terms of the modes of insecticidal actions of diatomite and pyrethrins. It is concluded that diatomite alone, despite its attractiveness to environmental interests, is not likely to become an effective agent for controlling red flour beetles and other pest insects with similar water‐proofing mechanisms.     

Metolachlor and chlorothalonil dissipation in gypsum-amended soil

This work focused on the interactive effects of the fungicide chlorothalonil (2,3,4,6-tetrachloro-1,3-benzendicarbonitrile) and gypsum on the persistence of the soil-residual herbicide metolachlor (2-chloro-N-(6-ethyl-o-tolyl)-N-[(1RS)-2-methoxy-1-methylethyl]acetamide). Gypsum application was included due to its widespread use on peanut (Arachis hypogaea). Both agricultural grade gypsum and reagent CaSO₄-2H₂O were tested. A laboratory soil incubation was conducted to evaluate interactive effects. Results indicated 1.5X greater metolachlor half-life (DT₅₀) in soil amended with chlorothalonil (37 d) as compared to control soil (25 d). The two gypsum sources alone increased metolachlor DT₅₀ to about 32 d and with the combination of chlorothalonil and gypsum, DT50 was 50 d, 2-fold greater than the control. Chlorothalonil dissipation was rapid (DT₅₀ < 4d). A possible explanation for metolachlor dissipation kinetics is a build-up of the chlorothalonil intermediate (4-hydroxychlorothalonil) which limited soil microbial activity and depleted glutathione S-transferase (GST) from chlorothalonil detoxification. Further information related to gypsum impacts is needed. Results confirm previous reports of chlorothalonil impeding metolachlor dissipation and showed the gypsum application extended persistence even longer. Farming practices, such as reducing metolachlor application rates, may need to be adjusted for peanut cropping systems where chlorothalonil and gypsum are used.     

Dissipation and sorption of six commonly used pesticides in two contrasting soils of New Zealand

We investigated dissipation and sorption of atrazine, terbuthylazine, bromacil, diazinon, hexazinone and procymidone in two contrasting New Zealand soils (0–10 cm and 40–50 cm) under controlled laboratory conditions. The six pesticides showed marked differences in their degradation rates in both top- and subsoils, and the estimated DT₅₀ values for the compounds were: 19–120 (atrazine), 10–36 (terbuthylazine), 12–46 (bromacil), 7–25 (diazinon), 8–92 (hexazinone) and 13–60 days for procymidone. Diazinon had the lowest range for DT₅₀ values, while bromacil and hexazinone gave the highest DT₅₀ values under any given condition on any soil type. Batch derived effective distribution coefficient (K _d ^eff) values for the pesticides varied markedly with bromacil and hexazinone exhibiting low sorption affinity for the soils at either depth, while diazinon gave high sorption values. Comparison of pesticide degradation in sterile and non-sterile soils suggests that microbial degradation was the major dissipation pathway for all six compounds, although little influence of abiotic degradation was noticeable for diazinon and procymidone.     

The dissipation of hexazinone in tropical soils under semi-controlled field conditions in Kenya

The dissipation of hexazinone (Velpar) in two tropical soil types in Kenya was studied under field and semi-controlled conditions for a period of 84 days. The dissipation was found to be very rapid and this could be attributed to adverse weather conditions including high initial rainfall as well as to low soil-organic-matter content, volatilization, surface run-off and biodegradation. The DT₅₀ values of dissipation obtained by first order kinetics were 20 days and 21.3 days in clay and loam soil types, respectively. The influence of bargasse compost (1000 μg/g dry soil) was also studied and was found to enhance dissipation to some extent, giving DT₅₀ values of 18 days and 18.3 days in clay and loam soil types, respectively.     

Mathematical prediction of imidacloprid persistence in two Croatian soils with different texture,organic matter content and acidity under laboratory conditions

In the present laboratory study, persistence of imidacloprid (IMI) as a function of initial insecticide concentration and soil properties in two Croatian soils (Krk sandy clay and Istria clay soils) was studied and described mathematically. Upon fitting the obtained experimental data for the higher concentration level (5 mg/kg) to mathematical models, statistical parameters (R ², scaled root mean squared error and χ ² error) indicated that the single first-order kinetics model provided the best prediction of IMI degradation in the Krk sandy clay soil, while in the Istria clay soil biphasic degradation was observed. At the lower concentration level (0.5 mg/kg), the biphasic models Gustafson and Holden models as well as the first-order double exponential model fitted the best experimental data in both soils. The disappearance time (DT₅₀) values estimated by the single first-order double exponential model (from 50 to 132 days) proved that IMI can be categorized as a moderately persistent pesticide. In the Krk sandy clay soil, resulting DT₅₀ values tended to increase with an increase of initial IMI concentration, while in the Istria clay soil, IMI persistence did not depend on the concentration. Organic matter of both experimental soils provided an accelerating effect on the degradation rate. The logistic model demonstrated that the effect of microbial activity was not the most important parameter for the biodegradation of IMI in the Istria clay soil, where IMI degradation could be dominated by chemical processes, such as chemical hydrolysis. The results pointed that mathematical modeling could be considered as the most convenient tool for predicting IMI persistence and contributes to the establishment of adequate monitoring of IMI residues in contaminated soil. Furthermore, IMI usage should be strictly controlled, especially in soils with low organic matter content where the risk of soil and groundwater contamination is much higher due to its longer persistence and consequent leaching and/or moving from soil surface prior to its degradation.     

Degradation kinetics of tebufenozide in model aquatic systems under controlled laboratory conditions

Abstract

The hydrolysis of the insecticide tebufenozide was studied in the dark at 20 to 40°C in buffered (pH 4 to 10) distilled water, and at 20°C in unbuffered, sterilized and unsterilized stream water. Tebufenozide was very stable in acidic and neutral buffers at 20°C and the corresponding pseudo‐first‐order rate constants (k_obsd) and half‐lives (T_1/2) were 5.946 × 10^‐4 and 13.10 × 10^‐4 d^‐1, and 1166 and 529 d, respectively. The hydrolytic degradation was dependent on pH and temperature. At pH 10 and at 20,30 and 40°C, the k_obsd (10^‐4 d^‐1) and T_1/2 (d) values were 34.22, 66.72 and 130.0; and 203, 104 and 53.3, respectively. The energy of activation (E_a) values for the hydrolysis of tebufenozide at pH 4, 7 and 10, calculated from the Arrhenius plots, were 83.50, 66.71 and 50.87 kJ/mol, respectively. Tebufenozide was stable in sterilized stream water in the dark (T_1/2 = 734 d) but it degraded fairly rapidly in unsterilized stream water (T_1/2 = 181 d). Sunlight photodegradation of the chemical was slower (T_1/2 = 83.0 h) than the photolysis by ultraviolet radiations (T_1/2 values at 254 and 365 nm were 9.92 and 27.6 h, respectively); nevertheless, it was still appreciable during the summer months at 46°31’ N latitude. The differences in degradation rates between the unsterilized and sterilized stream water and the degradation of the chemical in the sterile, distilled water in sunlight, suggests that microbial processes and photolysis are the two main degradative routes for tebufenozide in natural aquatic systems.     

Laboratory and field evaluation of real-time and near real-time PM2.5 smoke monitors

ABSTRACT

Increases in large wildfire frequency and intensity and a longer fire season in the western United States are resulting in a significant increase in air pollution, including concentrations of PM_2.5 (particulate matter <2.5 µm in aerodynamic diameter) that pose significant health risks to nearby communities. During wildfires, government agencies monitor PM_2.5 mass concentrations providing information and actions needed to protect affected communities; this requires continuously measuring instruments. This study assessed the performance of seven candidate instruments: (1) Met One Environmental beta attenuation monitor (EBAM), (2) Met One ES model 642 (ES642), (3) Grimm Environmental Dust Monitor 164 (EDM), (4) Thermo ADR 1500 (ADR), (5) TSI DRX model 8543 (DRX), (6) Dylos 1700 (Dylos), and (7) Purple Air II (PA-II) in comparison with a BAM 1020 (BAM) reference instrument. With the exception of the EBAM, all candidates use light scattering to determine PM_2.5 mass concentrations. Our comparison study included environmental chamber and field components, with two of each candidate instrument operating next to the reference instrument. The chamber component involved 6 days of comparisons for biomass combustion emissions. The field component involved operating all instruments in an air monitoring station for 39.5 days with hourly average relative humidity (RH) ranging from 19% to 98%. Goals were to assess instrument precision and accuracy and effects of RH, elemental carbon (EC), and organic carbon (OC) concentrations. All replicate candidate instruments showed high hourly correlations (R² ≥ 0.80) and higher daily average correlations (R² ≥ 0.90), where all instruments correlated well (R² ≥ 0.80) with the reference. The DRX and Purple Air overestimated PM_2.5 mass concentrations by a factor of ~two. Differences between candidates and reference were more pronounced at higher PM_2.5 concentrations. All optical instruments were affected by high RH and by the EC/OC ratio. Equations to convert candidate instruments data to FEM BAM type data are provided to enhance the usability of data from candidate instruments.

Implications: This study tested the performance of seven candidate PM_2.5 mass concentration measuring instruments in two settings - environmental chamber and field. The instruments were tested to determine their suitability for use during biomass combustion events and the effects of RH, PM mass concentrations, and concentrations of EC and OC on their performance. The accuracy and precision of each monitor and effect of RH, PM concentration, EC and OC concentrations are varied. The data show that most of these candidate instruments are suitable for measuring PM_2.5 concentration during biomass combustions with a proper correction factor for each instrument type.     

Effect of sunlight radiation,rainfall and droplet spectra of sprays on persistence of bacillus thuringiensis deposits after application of dipel® 76af formulation onto conifers

Abstract

The effect of sunlight radiation, rainfall and droplet spectra of sprays on per ‐sistence of a Bacillus thuringiensis subspp. kurstaki (Btk) formulation, DiPel^® 76AF, was examined after application onto spruce [Picea glauca (Moench) Voss] foliage. The investigation consisted of three studies: (i) Study I: a laboratory microcosm study to examine the photostability of DiPel 76AF deposits on foliage after different periods of exposure to two radiation intensities, (ii) Study II: a laboratory microcosm study to examine the rainfastness of foliar deposits after exposure to different amounts of rainfall consisting of two separate droplet spectra, and (iii) Study III: a field microcosm study to investigate the influence of two different droplet spectra of DiPel 76AF sprays on foliar persistence of Btk under natural weathering conditions. In all studies, persistence of Btk was investigated both by bioassay [using spruce budworm (Choristoneura fumiferana Clemens)] and total protein assay.

The findings of Study I indicated that bioactivity of foliar deposits decreased with increasing duration of exposure to radiation, and with increasing radiation intensity. The half‐life (DT₅₀, the exposure period required for 50% of the initial bioactivity to disappear) was 5.1 d for the low intensity, and 3.9 d for the higher intensity. In contrast with the bioassay results, the total protein levels [determined by the bicinchoninic acid (BCA) method] showed no decrease with increasing duration of exposure, or with increasing radiation intensity.

The findings of Study II indicated that bioactivity of foliar deposits decreased with increasing cumulative rainfall. A new term, RF₅₀ [the amount of rain (in mm) required to washoff 50% of the initial deposit], was introduced to understand the relationship between rainfall intensity and reduction in bioactivity. When the same amount of rain was applied in different droplet sizes, the RF₅₀ value was high (5.2 mm) for the small rain droplets, and was low (2.9 mm) for the large rain droplets. Similar to the bioassay results, the total protein concentrations (determined by the BCA method) decreased with increasing amount of rain and with increasing rainfall intensity. The RF₅₀ value (obtained using ng protein /cm²) was 5.4 mm for the small rain droplets, and was 3.4 mm for the large rain droplets.

The field microcosm study indicated that when DiPel 76AF was applied in small droplets (D_v.5 of 65 μm), the persistence of bioactivity was ca 8.0 d, whereas when it was applied in large droplets (D_v.5 of 130 nm) it was ca 11 d. Bioactivity decreased with time after spray, and the DT₅₀ was 1.98 d for the spray of small droplets, and 2.87 d for that of large droplets. Similar to the bioactivity, the total protein concentrations also decreased with time after spray, and the DT₅₀ values for the small and large droplet spectra were 3.45 and 6.07 d respectively.