Herbicide movement and dissipation at four Midwestern sites

This study was conducted to evaluate atrazine (2-chloro-4-ethylamino-6-isopropyl-1,3,5-triazine) and alachlor (2-chloro-N-(methoxymethyl)acetamide) dissipation and movement to shallow aquifers across the Northern Sand Plains region of the United States. Sites were located at Minnesota on a Zimmerman fine sand, North Dakota on Hecla sandy loam, South Dakota on a Brandt silty clay loam, and Wisconsin on a Sparta sand. Herbicide concentrations were determined in soil samples taken to 90 cm four times during the growing season and water samples taken from the top one m of aquifer at least once every three months. Herbicides were detected to a depth of 30 cm in Sparta sand and 90 cm in all other soils. Some aquifer samples from each site contained atrazine with the highest concentration in the aquifer beneath the Sparta sand (1.28 microg L(-1)). Alachlor was detected only once in the aquifer at the SD site. The time to 50% atrazine dissipation (DT50) in the top 15 cm of soil averaged about 21 d in Sparta and Zimmerman sands and more than 45 d for Brandt and Hecla soils. Atrazine DT50 was correlated positively with % clay and organic carbon (OC), and negatively with % fine sand. Alachlor DT50 ranged from 12 to 32 d for Zimmerman and Brandt soils, respectively, and was correlated negatively with % clay and OC and positively with % sand.     

The dissipation of hexazinone in tropical soils under semi-controlled field conditions in Kenya

The dissipation of hexazinone (Velpar) in two tropical soil types in Kenya was studied under field and semi-controlled conditions for a period of 84 days. The dissipation was found to be very rapid and this could be attributed to adverse weather conditions including high initial rainfall as well as to low soil-organic-matter content, volatilization, surface run-off and biodegradation. The DT₅₀ values of dissipation obtained by first order kinetics were 20 days and 21.3 days in clay and loam soil types, respectively. The influence of bargasse compost (1000 μg/g dry soil) was also studied and was found to enhance dissipation to some extent, giving DT₅₀ values of 18 days and 18.3 days in clay and loam soil types, respectively.     

Dissipation and sorption of six commonly used pesticides in two contrasting soils of New Zealand

We investigated dissipation and sorption of atrazine, terbuthylazine, bromacil, diazinon, hexazinone and procymidone in two contrasting New Zealand soils (0–10 cm and 40–50 cm) under controlled laboratory conditions. The six pesticides showed marked differences in their degradation rates in both top- and subsoils, and the estimated DT₅₀ values for the compounds were: 19–120 (atrazine), 10–36 (terbuthylazine), 12–46 (bromacil), 7–25 (diazinon), 8–92 (hexazinone) and 13–60 days for procymidone. Diazinon had the lowest range for DT₅₀ values, while bromacil and hexazinone gave the highest DT₅₀ values under any given condition on any soil type. Batch derived effective distribution coefficient (K _d ^eff) values for the pesticides varied markedly with bromacil and hexazinone exhibiting low sorption affinity for the soils at either depth, while diazinon gave high sorption values. Comparison of pesticide degradation in sterile and non-sterile soils suggests that microbial degradation was the major dissipation pathway for all six compounds, although little influence of abiotic degradation was noticeable for diazinon and procymidone.     

Tylosin Sorption to Silty Clay Loam Soils,Swine Manure,and Sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 μ mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K _f ) or K _d values, were calculated. K _f values for the silty clay loams were similar, not influenced by landscape position, and averaged 1350 with isotherm slopes ranging from 0.85 to 0.93. K _f values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K _d values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K _f values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

Biotransformation of atrazine and metolachlor within soil profile and changes in microbial communities

Biotransformation studies of atrazine, metolachlor and evolution of their metabolites were carried out in soils and subsoils of Northern Greece. Trace atrazine, its metabolites and metolachlor residues were detected in field soil samples 1 year after their application. The biotransformation rates of atrazine were higher in soils and subsoils of field previously exposed to atrazine (maize field sites) than in respective layers of the field margin. The DT₅₀ values of atrazine ranged from 5 to 18 d in the surface layers of the adapted soils. DT₅₀ values of atrazine increased as the soil depth increased reaching the value of 43 d in the 80-110 cm depth layer of adapted soils. Metolachlor degraded at slower rates than atrazine in surface soils, subsoils of field and field margins with the respective DT₅₀ values ranging from 56 to 72 d in surface soils and from 165 to 186 d in subsoils. Hydroxyatrazine was the most frequently detected metabolite of atrazine. The maximum concentrations of metolachlor-OXA and metolachlor-ESA were detected in the soil layers of 20-40 cm depth after 90 d of incubation. Principal Component Analysis (PCA) of soil Phospholipid Fatty Acids (PLFAs), fungal/bacterial and Gram-negative/Gram-positive ratios of the PLFA profiles revealed that the higher biotransformation rates of atrazine were simultaneously observed with the abundance of Gram-negative bacteria while the respective rates of metolachlor were observed in soil samples with abundance of fungi.     

Paraquat Adsorption,Degradation, and Remobilization in Tropical Soils of Thailand

Paraquat adsorption, degradation, and remobilization were investigated in representative tropical soils of Yom River Basin, Thailand. Adsorption of paraquat in eight soil samples using batch equilibration techniques indicated that adsorption depended on soil characteristics, including exchangeable basic cations and iron content. Multiple regression analysis indicated significant contribution of exchangeable calcium percentage (ECP), total iron content (TFe) and exchangeable sodium percentage (ESP) to paraquat sorption (Q). ESP and TFe were significant at all adsorption stages, whereas ESP was significant only at the initial stage of paraquat adsorption. Adsorption studies using two soils representing clay and sandy loam textures showed that paraquat adsorption followed the Freundlich model, exhibiting a nonlinear sorption curve. Paraquat adsorption was higher in the clay soil compared to the sandy loam soil with K _f values of 787 and 18, respectively. Desorption was low with 0.04 to 0.17% and 0.80 to 5.83% desorbed in clay and sandy loam soil, respectively, indicating some hysteresis effect. Time-dependent paraquat adsorption fitted to the Elovich kinetic model indicated that diffusion was a rate-limiting process. Paraquat mobility and degradation studies conducted using both field and laboratory soil column experiments with clay soil showed low mobility of paraquat with accumulation only in the surface 0–5 cm layer under field conditions and in the 0–1 cm layer in a laboratory soil column experiment. Degradation of paraquat in soil was faster under field conditions than at ambient laboratory conditions. The degradation rate followed a first-order kinetic model with the DT₅₀ at 36–46 days and DT₉₀ around 119–152 days.     

Tylosin sorption to silty clay loam soils, swine manure, and sand

The objectives of this study were to assess sorption and desorption of tylosin, a macrolide antimicrobial chemical used in swine, cattle, and poultry production, in three silty clay loam soils of South Dakota and compare soil sorption to sand and manure sorption. The silty clay loam soils, from a toposequence in eastern South Dakota, standardized sand samples, and swine manure were used in 24-h batch sorption studies with tylosin concentrations ranging from 25 to 232 micro mole/L. Desorption from soil was conducted over a four-day period. Partition coefficients, based on the Freundlich isotherm (K(f)) or K(d) values, were calculated. K(f) values for the silty clay loams were similar, not influenced by landscape position, and averaged 1,350 with isotherm slopes ranging from 0.85 to 0.93. K(f) values for sand were dependent on solution/sand ratios and pH, ranging from 1.4 to 25.1. K(d) values of manure were dependent on the solution type and ranged from 840 L/kg with urine to about 175 L/kg when sorbed from water. Desorption of tylosin from each soil over the four-day period was < 0.2% of the amount added. The soils' high K(f) values and low desorption amounts suggest that once tylosin is in these soils, leaching to lower depths may not occur. However, this does not preclude runoff with soil eroded particles. If tylosin reaches a sand aquifer, through bypass flow or other mechanism(s), movement in the aquifer most likely would occur.     

Biotransformation of atrazine and metolachlor within soil profile and changes in microbial communities

Biotransformation studies of atrazine, metolachlor and evolution of their metabolites were carried out in soils and subsoils of Northern Greece. Trace atrazine, its metabolites and metolachlor residues were detected in field soil samples 1 year after their application. The biotransformation rates of atrazine were higher in soils and subsoils of field previously exposed to atrazine (maize field sites) than in respective layers of the field margin. The DT₅₀ values of atrazine ranged from 5 to 18 d in the surface layers of the adapted soils. DT₅₀ values of atrazine increased as the soil depth increased reaching the value of 43 d in the 80–110 cm depth layer of adapted soils. Metolachlor degraded at slower rates than atrazine in surface soils, subsoils of field and field margins with the respective DT₅₀ values ranging from 56 to 72 d in surface soils and from 165 to 186 d in subsoils. Hydroxyatrazine was the most frequently detected metabolite of atrazine. The maximum concentrations of metolachlor-OXA and metolachlor-ESA were detected in the soil layers of 20–40 cm depth after 90 d of incubation. Principal Component Analysis (PCA) of soil Phospholipid Fatty Acids (PLFAs), fungal/bacterial and Gram-negative/Gram-positive ratios of the PLFA profiles revealed that the higher biotransformation rates of atrazine were simultaneously observed with the abundance of Gram-negative bacteria while the respective rates of metolachlor were observed in soil samples with abundance of fungi.     

Leaching,mobility and persistence of tebufenozide in columns packed with forest litter and soil

Abstract

Leaching, downward mobility and persistence of tebufenozide was investigated under laboratory conditions in columns packed with forest litter and soil, after fortification with the analytical grade material (purity > 99.6%) and with two commercial formulations, RH‐5992 2F (aqueous flowable) and RH‐5992 ES (emulsion suspension). Two types of litter and soil were used: one type with relatively high amounts of sand and the other with high amounts of clay.

The concentrations eluted in the leachates were lower when the analytical material (dissolved in acetone) was used for fortification, than when the two formulations (diluted with water) were used. The amount leached was higher for RH‐5992 2F than for RH‐5992 ES. The type of substrate, i.e., sandy or clay type, had only marginal influence on the amounts eluted in the leachates. Downward movement of tebufenozide from the top 2‐cm layer to the untreated middle and bottom layers (3‐cm segments) was consistently lower when the analytical material was used for fortification, than when the two formulations were used. Downward movement was higher for RH‐5992 2F than for RH‐5992 ES. Persistence of tebufenozide in substrates, maintained under submerged conditions for 70 days after leaching, indicated an initial 2‐week lag period prior to the onset of degradation. Formulation‐related differences were observed in the half‐life (DT₅₀) values. When the analytical material was used for fortification, the DT₅₀ ranged from ca 54 to 59 d. However, when the formulations were used for fortification, the DT₅₀ showed a higher range, i.e., from ca 62 to 67 d for RH‐5992 2F and ca 70 to 80 d for RH‐5992 ES. Formulation ingredients appear to have caused enhanced adsorption of tebufenozide onto the substrates, thus delaying degradation.     

Ultrasonic decomposition of atrazine and alachlor in water.

Abstract

The collapse of ultrasonically‐generated cavitation bubbles can result in sonochemical reactions. The kinetics of sonochemical decomposition of alachlor and atrazine in water were determined using a sonicator operating in the continuous mode at maximum output. Alachlor and atrazine solutions, 3.1 nmol L^‐1, were kept at constant temperature during the sonication. Decomposition at 30°C followed first‐order kinetics: k = 8.01 × 10^‐3 min^‐1 and 2.10 × 10^‐3 min^‐1 for alachlor and atrazine, respectively. It is not clear from the product analysis whether the decomposition was due to a thermal or free radical reaction. However, regardless of the decomposition mechanisms, the extrapolated half‐lives (86 and 330 min for alachlor and atrazine, respectively) support the potential development of ultrasonic waves to decompose herbicides in contaminated water.     

Persistence of azadirachtin A and B in soil: Effects of temperature and microbial activity

Abstract

The persistence of two insecticidally active compounds from the neem tree, azadirachtin A and B, was determined at two different temperatures (15 and 25°C) in the laboratory after application of the commercial neem insecticide, Margosan‐O, to a sandy loam soil. The influence of microbial activity on degradation was also examined by comparing autoclaved and non‐autoclaved soils also at 15 and 25°C. Temperature influenced degradation rates. The DT ₅₀ (time required for 50% disappearance of the initial concentration) for azadirachtin A was 43.9 and 19.8 d for non‐autoclaved soil kept at 15 and 25°C, respectively. The DT ₅₀ for azadirachtin B was 59.2 and 20.8 d for non‐autoclaved soil kept at 15 and 25°C, respectively. Microbial activity was also responsible for faster degradation because DT ₅₀ ’s for autoclaved soil were much longer than for non‐autoclaved soils. DT ₅₀ ‘_s for azadirachtin A in autoclaved soil were 91.2 (15°C) and 31.5 d (25°C). DT50’s for azadirachtin B in autoclaved soil were 115.5 (15°C) and 42.3 d (25°C). Two degradation products of azadirachtin were detected, but were not identified. Higher levels of the two degradation products were detected in non‐autoclaved soil.     

Sorption and leaching of flucetosulfuron in soil

Abstract

The adsorption–desorption and leaching of flucetosulfuron, a sulfonylurea herbicide, was investigated in three Indian soils. Freundlich adsorption isotherm described the sorption mechanism of herbicide with adsorption coefficients (K_f) ranging from 17.13 to 27.99 and followed the order: Clayey loam?>?Loam?>?Sandy loam. The K_f showed positive correlation with organic carbon (OC) (r?=?0.910) and clay content (r?=?0.746); but, negative correlation with soil pH (r = ?0.635). The adsorption isotherms were S-type suggesting that herbicide adsorption was concentration dependent and increased with increase in concentration. Desorption followed the sequence: sandy loam?>?clayey loam?>?loam . Hysteresis (H) was observed in all the three soils with H?<?1. Leaching of flucetosulfuron correlated positively with the soil pH; but, negatively with the OC content. Sandy loam soil (OC- 0.40%, pH ?7.25) registered lowest adsorption and highest leaching of flucetosulfuron while lowest leaching was found in the loam soil (pH ? 7.89, OC ? 0.65%). The leaching losses of herbicide increased with increase in the rainfall intensity. This study suggested that the soil OC content, pH and clay content played important roles in deciding the adsorption–desorption and leaching behavior of flucetosulfuron in soils.     

Dissipation of sulfamethoxazole and trimethoprim antibiotics from manure-amended soils

In this study, the dissipation of two antibiotics, sulfamethoxazole (SMX) and trimethoprim (TRM), in three soils under both aerobic and anaerobic conditions are evaluated. Under aerobic conditions, SMX dissipated rapidly through biodegradation but TRM was more persistent. Within the first 20 days in biologically active soils, >50% of the SMX was lost from the clay loam and loamy sand soils, and >80% loss was noted in the loam soil. Anaerobic dissipation of both compounds was more rapid than aerobic dissipation. The addition of manure to the soil only slightly increased the initial dissipation rate of the two compounds. Little effect was found on glucose mineralisation in soil following the addition of SMX and TRM, even as mixtures at high concentrations.     

Dissipation of sulfamethoxazole and trimethoprim antibiotics from manure-amended soils

In this study, the dissipation of two antibiotics, sulfamethoxazole (SMX) and trimethoprim (TRM), in three soils under both aerobic and anaerobic conditions are evaluated. Under aerobic conditions, SMX dissipated rapidly through biodegradation but TRM was more persistent. Within the first 20 days in biologically active soils, >50% of the SMX was lost from the clay loam and loamy sand soils, and >80% loss was noted in the loam soil. Anaerobic dissipation of both compounds was more rapid than aerobic dissipation. The addition of manure to the soil only slightly increased the initial dissipation rate of the two compounds. Little effect was found on glucose mineralisation in soil following the addition of SMX and TRM, even as mixtures at high concentrations.     

Bioavailability and dissipation of fluridone under controlled conditions

Abstract

Bioavailability of fluridone, l‐methyl‐3‐phenyl‐5‐[3‐(trifluoromethyl) phenyl]‐4(1H)‐pyridinone, as affected by soil temperature, soil moisture regime, and duration of incubation was investigated in three soil types by grain sorghum (Sorghum bicolor [L.] Moench cv. Abu Sabien) chlorophyll bioassay. Initial loss of fluridone was rapid and dissipation followed first‐order kinetics under most of the incubation treatments investigated. Soil moisture, in general, had a greater impact than soil temperature on dissipation of fluridone. The herbicide dissipated faster at the fluctuating room temperature (18–24°C) than at the constant 10°C in Sonning sandy clay loam (O.M. = 1.2%) and Erl Wood sandy loam (O.M. = 2.5%) but not in Shropshire loamy peat (O.M. = 33%). In the two mineral soils, bioassay‐detectable residues from an initial rate of 1.00 μg/g were least (0.00 ‐ 0.10 μg/g) at 1/2 field capacity (FC) and greatest (0.16 ‐ 0.37 μg/g) at 1/4 FC, 400 days after treatment. At 10°C, the DT₅₀ values (days) at 1/4 FC and 1/2 FC were, respectively, 147 ± 16 and 69 ± 6 for Erl Wood soil, and 257 ± 28 and 51 ± 12 for Sonning soil. In Shropshire soil, concentrations of bioavailable fluridone were least at each bioassay date when soil moisture was maintained at FC, at both temperatures of incubation. At 10°C, herbicide concentrations in the organic soil from an initial rate of 10.00 μg/g were 0.95 and 4.69 μg/g, respectively, at FC and 1/4 FC.     

Metolachlor and chlorothalonil dissipation in gypsum-amended soil

This work focused on the interactive effects of the fungicide chlorothalonil (2,3,4,6-tetrachloro-1,3-benzendicarbonitrile) and gypsum on the persistence of the soil-residual herbicide metolachlor (2-chloro-N-(6-ethyl-o-tolyl)-N-[(1RS)-2-methoxy-1-methylethyl]acetamide). Gypsum application was included due to its widespread use on peanut (Arachis hypogaea). Both agricultural grade gypsum and reagent CaSO₄-2H₂O were tested. A laboratory soil incubation was conducted to evaluate interactive effects. Results indicated 1.5X greater metolachlor half-life (DT₅₀) in soil amended with chlorothalonil (37 d) as compared to control soil (25 d). The two gypsum sources alone increased metolachlor DT₅₀ to about 32 d and with the combination of chlorothalonil and gypsum, DT50 was 50 d, 2-fold greater than the control. Chlorothalonil dissipation was rapid (DT₅₀ < 4d). A possible explanation for metolachlor dissipation kinetics is a build-up of the chlorothalonil intermediate (4-hydroxychlorothalonil) which limited soil microbial activity and depleted glutathione S-transferase (GST) from chlorothalonil detoxification. Further information related to gypsum impacts is needed. Results confirm previous reports of chlorothalonil impeding metolachlor dissipation and showed the gypsum application extended persistence even longer. Farming practices, such as reducing metolachlor application rates, may need to be adjusted for peanut cropping systems where chlorothalonil and gypsum are used.     

Sorptive interactions and binding of δ‐endotoxin protein from bacillus thuringiensis subsp. kurstaki inforest soils

Abstract

The adsorption, desorption and binding of the insecticidal protein from Bacillus thuringiensis subsp. kurstaki (Btk toxin) onto autoclaved sandy and clay loam forest soils were studied at 23°C in a buffer medium (pH 10.2) using the precipitated protein mixture (active + inactive) obtained from a commercial Btk formulation. The active protein in the buffer solution was quantified by ELISA technique. Maximum adsorption of the toxin onto the sandy (301 μg/g) and clay (474 μg/g) loam soils was found to occur after 3 and 4 hours of agitation, respectively. Adsorption of the toxin was higher in the clay loam soil than in sandy loam. Adsorption parameters were calculated using the Freundlich and linear isotherm equations. The K_F and 1/n values for the soils were 1.12 and 1.48 (sandy), and 20.42 and 0.874 (clay), respectively, indicating stronger affinity of the toxin for the clay compared to the sandy loam soil. The linear model showed deviations at higher concentrations, nevertheless using the best fit, K_D and K_OC values were computed for the two soils. For sandy loam, the K_D and K_OC values were 9.38 and 391, respectively; the corresponding values for clay loam were 13.19 and 425, confirming the higher sorption affinity of the toxin for clay loam. The adsorption data did not fit the Langmuir equation because of heterogeneity of the soil surface. Desorption studies showed that more than half of the adsorbed toxic protein remained firmly attached to sandy (162.6 μg/g or 54.5%) and clay (314.0 μg/g or 67.4%) loam soils after six 0.5‐h washes (total 3.0 h wash time). Although the toxin appears to be a non‐leacher, its lateral mobility, soil persistence and biological consequences, including bioavailability of the bound residues, are poorly understood and require further investigation.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48–72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K _d) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Modelling the dissipation kinetics of six commonly used pesticides in two contrasting soils of New Zealand

We used three non-linear bi-phasic models, bi-exponential (BEXP), first-order double exponential decay (FODED), and first-order two-compartment (FOTC), to fit the measured degradation data for six commonly used pesticides (atrazine, terbuthylazine, bromacil, diazinon, hexazinone and procymidone) in two New Zealand soils. Corresponding DT₅₀ and DT₉₀ values for each compound were numerically obtained and compared against those estimated by simple first-order kinetic (SFOK) model. All 3 non-linear models gave good fit of the measured data under both soil depths and were well supported by the values obtained for the respective statistical indices (RMSE, CRM and r ²). The FOTC model gave by far the best fit for most compounds, followed by the FODED and BEXP models. Overall, DT₅₀ values derived by non-linear models for the six compounds in soils from both sites were lower than the values obtained by the SFOK model. Differences in the SFOK and the three non-linear models derived DT₉₀were, however, an order of magnitude higher for some compounds, while for others differences were very small. Although all three non-linear models described most data by giving excellent fits, in a few instances > 5–10% asymptotes hindered the estimation of DT₉₀ values. This work shows that when degradation deviates from first-order kinetic, application of non-linear decay models to describe the kinetics of degradation becomes important in order to derive the true end-points for pesticides in soil.     

Dissipation of terbuthylazine,metolachlor, and mesotrione in soils with contrasting texture

ABSTRACT

This study evaluates the dissipation of terbuthylazine, metolachlor, and mesotrione at different depths in soils with contrasting texture. The field trial was conducted at the Padua University Experimental Farm, north-east Italy. The persistence of three herbicides was studied in three different soil textures (clay soil, sandy soil, and loamy soil) at two depths (0–5 and 5–15 cm). Soil organic carbon content was highest in the clay (1.10%) followed by loam (0.67%) and sandy soil (0.24%); the pH of soils was sub-alkaline. Terbuthylazine, metolachlor, and mesotrione were applied on maize as a formulated product (Lumax®) at a dose of 3.5 L ha^?1. Their dissipation in the treated plots was followed for 2 months after application. The concentrations of herbicides were analyzed by liquid chromatography-mass spectrometry. The dissipation of terbuthylazine, metolachlor, and mesotrione could be described by a pseudo first-order kinetics. Terbuthylazine showed the highest DT50, followed by metolachlor and mesotrione. Considering the tested soil, the highest DT50 value was found in clay soil for terbuthylazine and metolachlor, whereas for mesotrione there was no difference among soils. Significant differences were found between the two soil depths for terbuthylazine and metolachlor, whereas none were found for mesotrione. These results suggest that soil texture and depth have a strong influence on the dissipation of terbuthylazine and metolachlor, whereas no influence was observed on mesotrione because of its chemical and physical properties.