Effect of five insecticides on microbial and enzymatic activities in sandy soil

Abstract

A laboratory study was conducted to examine the effects of five insecticides on microbial and enzymatic activities important to fertility in sandy soil. Cyfluthrin significantly increased bacterial populations after 2 wks. Imidacloprid showed an inhibitory effect on fungal numbers after 2 wks incubation while the others did not affect fungal population. No inhibitory effect was observed on nitrification of soil indigenous nitrogen. All treatments stimulated S‐oxidation after 4 wks. With the exception of cyfluthrin and imidacloprid after 2 wks, denitrification in sandy soil indicated that all treatment inhibited denitrification throughout the experiment. No inhibitory effects on biomass‐c were observed during 2‐wk periods. An inhibitory effect was observed on amylase after 1 wk while significant recovery was observed after 3 wks. With the exception of HgCl₂, no effect was observed on reducing sugar formation for 2 wks with all treatments. Formazan formation resulting from dehydrogenase activity was significantly greater with tebupirimphos and Aztec for 1 wk. All treatments supressed phosphatase activity for 1 wk, while none of the treatments suppressed phosphatase activity after 2 wks. Amitraz, tebupirimphos and Aztec inhibited urease activity for 1 wk. With the exception of tebupirimphos, no treatments affected N₂‐fixation in soil. Although short‐lived inhibitory effects on activities of microbes and enzymes were caused by the insecticides, the soil indigenous microbes can tolerate the chemicals used for control of soil pests.     

Effect of four experimental insecticides on enzyme activities and levels of adenosine triphosphate in mineral and organic soils

Abstract

A laboratory study was conducted to determine the effect of four experimental insecticides, DOWCO429X, DPX43898, tefluthrin and trimethacarb, on enzyme activities and levels of adenosine 5'‐triphosphate (ATP) in mineral and organic soils. DOWCO429X decreased urease activity in organic soil after 7 days while a stimulatory effect was observed with most treatments after 14 days. No inhibition on acetylene (C₂H₂) reduction by nitrogenase was evident with any of the insecticides in either soil. With the exception of DOWCO429X and tefluthrin at 7 days in organic soil, none of the insecticide treatments inhibited dehydrogenase activity in either soil. Dehydrogenase activity, measured by formazan formation, was greater in many samples in sandy loam than the control throughout the experiment. No inhibitory effect was observed on amylase activity after 2 or 3 days in sandy soil. A stimulatory effect was apparent in many samples after 2 days in organic soil. All insecticide treatments in sandy soil reduced invertase activity at 2 days. However, none of the experimental insecticides inhibited invertase activity after 3 days. A stimulatory effect in invertase activity was apparent in most cases at 2 days in organic soil and no difference was observed after 3 days. Phosphatase activity in insecticide treated samples was equal to or greater than that of control in sandy soil after 2 h. With the exception of DPX43898, the insecticides depressed phosphatase activity in most organic soil samples. The insecticides did not affect ATP levels in either soil. Results indicated that the chemical treatments at the levels tested did not significantly affect activities of enzymes or level of ATP in both soils.     

Effects of metsulfuron‐methyl on microbial biomass and populations in soils

Abstract

Effects of the herbicide metsulfuron‐methyl on soil microorganisms and their activities in two soils were evaluated under laboratory conditions. Measurements included their populations, soil respiration, and microbial biomass. In the clay soil, bacterial populations decreased with increasing concentration of metsulfuron‐methyl during the first 9 days of incubation but exceeded that of the control soil from day 27 onward. In the sandy loam soil, the herbicide reduced bacterial populations during the first 3 days after application, but these increased to the level of untreated controls after 9 days’ incubation. Fungal populations in both soils increased with increasing metsulfuron‐methyl concentrations, especially in the sandy loam soil. CO₂ evolution was stimulated in both soils in the presence of the herbicide initially, but decreased during days 3 to 9 of the incubation period before increasing again afterward. The presence of metsulfuron‐methyl in the soil increased microbial biomass, except in sandy loam soil at the first day of incubation.     

Behaviour of simazine in soil amended with the final residue of the olive-oil extraction process

Addition of organic wastes to agricultural soils is becoming a common practice as a disposal strategy and to improve the physical and chemical soil properties. However, in order to optimise the use of organic wastes as soil amendments, their effect on the behaviour of other compounds that are also used in agriculture, such as pesticides, needs to be assessed. In this work, we have investigated the effects of the addition of the final solid residue of the new technology of olive-oil extraction (extracted alperujo or solid olive-mill waste, SOMW2) on the sorption, degradation and leaching of the herbicide simazine in a sandy loam soil. The results are compared with those of a previous study, where the intermediary by-product of the olive-oil processing technology (unextracted alperujo or SOMW1) was applied to the same soil. The soil was amended in the laboratory with SOMW2 at two different rates (5% and 10% w/w). Simazine sorption isotherms showed a great increase in herbicide sorption after SOMW2 addition to soil. SOMW2 addition also increased sorption irreversibility. Incubation studies revealed reduced biodegradation of simazine in the soil amended with SOMW2 compared to the unamended soil. Breakthrough curves of simazine in handpacked soil columns showed that SOMW2 addition retarded the vertical movement of the herbicide through the soil and greatly reduced the amount of herbicide available for leaching. Interestingly, the results were quantitatively different from those obtained for the intermediary by-product SOMW1, illustrating the importance of the specific characteristics of the organic amendment in determining its effect on pesticide behaviour.     

Effects of some insecticides on microbial activities in sandy soil

Abstract

Laboratory tests were conducted with 14 insecticides applied to a sandy loam to determine whether these materials caused any effects on microbial activities related to soil fertility. The ammonification of soil native organic nitrogen was not inhibited by any of the insecticide treatments. Some insecticides showed an effect on nitrification during the second week of incubation which subsequently recovered to levels similar to those obtained in the controls. There was a significant effect on denitrification in a number of treated samples. However, recovery of denitrifying capacity was rapid. This recovery indicated that the indigenous soil microorganisms can tolerate the chemicals used for control of insect pests. No significant inhibition of sulfur oxidation was observed. Results indicated that the insecticide treatments at the level tested were not drastic enough to be considered deleterious to soil microbial activities important to soil fertility.     

Persistence of metsulfuron‐methyl in two soils

Abstract

The persistence of metsulfuron‐methyl in sandy loam and clay soil incubated at different temperatures and moistures contents was investigated under laboratory conditions using longbean (Vigna sesquipedalis L.) as bioassay species. A significant degradation of metsulfuron‐methyl was observed in non‐autoclaved soil rather than the autoclaved soil sample. At higher temperature, the degradation rate in non‐autoclaved soil improved with increasing soil moisture content. In non‐autoclaved sandy loam and clay soil, the half‐life was reduced from 9.0 to 5.7 and from 11.2 to 4.6 days, respectively when moisture level of sandy loam increased from 20 to 80% field capacity at 35°C. In the autoclaved soil, herbicide residue seems to have been broken down by non‐biological process. The rate of dissipation was slightly increased after the second application of the herbicide to non‐autoclaved soils but not in autoclaved soil, indicating the importance of microorganisms in the breakdown process.     

Laboratory study on leachability of five herbicides in South Australian soils

Abstract

Norflurazon, oxadiazon, oxyfluorfen, trifluralin and simazine are herbicides widely used in the vineyards of the Barossa Valley, South Australia. The leaching behaviour of norflurazon, oxadiazon, oxyfluorfen and trifluralin was investigated on four key soils in the Barossa Valley. Leaching potential on packed soil columns and actual mobility using intact soil columns were investigated. On the packed soil columns, norflurazon was the most leachable herbicide. More of the herbicides were detected in the leachates from the sandy soils (Mountadam and Nuriootpa) than from the clayey soils (Lyndoch and Tanunda). Organic matter is generally low in soils in the Barossa region. Porosity and saturated conductivity significantly affect herbicide movement and in the sandy Mountadam and Nuriootpa soils, the water flux is greater than for the higher clay content Lyndoch and Tanunda soils. Increasing the time interval between herbicide application and the incidence of “rainfall”; reduced the amounts of herbicides found in the leachates. The use of intact soil columns and including simazine for comparison showed that both norflurazon and simazine were present in the leachates. Simazine was the first herbicide to appear in leachates. Sectioning of the intact soil columns after leaching clearly demonstrated that norflurazon and simazine reached the bottom of the soil columns for all soils studied. Greater amounts of norflurazon were retained in the soil columns compared with simazine. The other herbicides were mostly retained in the initial sections of the soil columns.     

Effect of some herbicides on activities of microorganisms and enzymes in soil

Abstract

Laboratory tests were conducted with eight herbicides, atrazine, butylate, ethalfluralin, imazethapyr, linuron, metolachlor, metribuzin and trifluralin, applied to a loamy sand at rate of 10 μg/g to determine if these materials caused any serious effects on microbial and enzymatic activities related to soil fertility. Some herbicides showed an effect on bacteria and fungi for the first week of incubation, but, subsequently, the populations returned to levels similar to those obtained in the controls. After several herbicide treatments there appeared to cause a slight depression of nitrification. Sulfur oxidation was better than that obtained with untreated soil in all treatments. Oxygen consumption was increased significantly after 96 hr incubation with atrazine. The soil dehydrogenase and amylase activities were inhibited by ethalfluralin treatment respectively for 1 wk and 1 day, and p‐nitrophenol liberation was inhibited for 2 hrs by all herbicide treatments. Results indicated that the herbicidal treatments at the level tested were not drastic enough to be considered deleterious to soil microbial and enzymatic activities which are important to soil fertility.     

Adsorption studies of the herbicide simazine in agricultural soils of the Aconcagua valley, central Chile

Simazine is a s-triazine herbicide that has been applied worldwide for agriculture. This herbicide is the second most commonly detected pesticide in surface and groundwater in the United States, Europe and Australia. In this study, simazine adsorption behaviour was studied in two agricultural soils of the Aconcagua valley, central Chile. The two studied soils were soil A (loam, 8.5% organic matter content) and soil B (clay-loam, 3.5% organic matter content). Three times higher simazine adsorption capacity was observed in soil A (68.03 mg kg⁻¹) compared to soil B (22.03 mg kg⁻¹). The simazine adsorption distribution coefficients (K_d) were 9.32 L kg⁻¹ for soil A and 7.74 L kg⁻¹ for soil B. The simazine adsorption enthalpy in soil A was −21.0 kJ mol⁻¹ while in soil B the adsorption enthalpy value was −11.5 kJ mol⁻¹. These results indicate that simazine adsorption process in these soils is exothermic, governing H bonds the adsorption process of simazine in both the loam and clay-loam soils. These results and the potentiometric profiles of both soils, suggest that simazine adsorption in soil A is mainly governed by simazine–organic matter interactions and in soil B by simazine–clay interactions. The understanding of simazine sorption–desorption processes is essential to determine the pesticide fate and availability in soil for pest control, biodegradation, runoff and leaching.     

Sorption and leaching of flucetosulfuron in soil

Abstract

The adsorption–desorption and leaching of flucetosulfuron, a sulfonylurea herbicide, was investigated in three Indian soils. Freundlich adsorption isotherm described the sorption mechanism of herbicide with adsorption coefficients (K_f) ranging from 17.13 to 27.99 and followed the order: Clayey loam?>?Loam?>?Sandy loam. The K_f showed positive correlation with organic carbon (OC) (r?=?0.910) and clay content (r?=?0.746); but, negative correlation with soil pH (r = ?0.635). The adsorption isotherms were S-type suggesting that herbicide adsorption was concentration dependent and increased with increase in concentration. Desorption followed the sequence: sandy loam?>?clayey loam?>?loam . Hysteresis (H) was observed in all the three soils with H?<?1. Leaching of flucetosulfuron correlated positively with the soil pH; but, negatively with the OC content. Sandy loam soil (OC- 0.40%, pH ?7.25) registered lowest adsorption and highest leaching of flucetosulfuron while lowest leaching was found in the loam soil (pH ? 7.89, OC ? 0.65%). The leaching losses of herbicide increased with increase in the rainfall intensity. This study suggested that the soil OC content, pH and clay content played important roles in deciding the adsorption–desorption and leaching behavior of flucetosulfuron in soils.     

Laboratory study on leachability of five herbicides in South Australian soils

Norflurazon, oxadiazon, oxyfluorfen, trifluralin and simazine are herbicides widely used in the vineyards of the Barossa Valley, South Australia. The leaching behaviour of norflurazon, oxadiazon, oxyfluorfen and trifluralin was investigated on four key soils in the Barossa Valley. Leaching potential on packed soil columns and actual mobility using intact soil columns were investigated. On the packed soil columns, norflurazon was the most leachable herbicide. More of the herbicides were detected in the leachates from the sandy soils (Mountadam and Nuriootpa) than from the clayey soils (Lyndoch and Tanunda). Organic matter is generally low in soils in the Barossa region. Porosity and saturated conductivity significantly affect herbicide movement and in the sandy Mountadam and Nuriootpa soils, the water flux is greater than for the higher clay content Lyndoch and Tanunda soils. Increasing the time interval between herbicide application and the incidence of "rainfall" reduced the amounts of herbicides found in the leachates. The use of intact soil columns and including simazine for comparison showed that both norflurazon and simazine were present in the leachates. Simazine was the first herbicide to appear in leachates. Sectioning of the intact soil columns after leaching clearly demonstrated that norflurazon and simazine reached the bottom of the soil columns for all soils studied. Greater amounts of norflurazon were retained in the soil columns compared with simazine. The other herbicides were mostly retained in the initial sections of the soil columns.     

Effects of pesticides on activities of enzymes and microorganisms in a clay soil

Laboratory experiments were conducted to determine the effect of 32 pesticides applied at 2 levels on populations of microorganisms, activities of urease, dehydrogenase, phosphatase and nitrogenase in a clay loam incubated for 1 week. Results indicated that a decrease in bacterial number was observed with thiram for 2 days and stimulation with chlorpyrifos after 7 days. Some fungicides and fumigants inhibited fungal numbers for 2 days. The recovery was rapid and stimulatory effects on microbial numbers were evident in many samples. None of the pesticides inhibited soil urease drastically. Formazan formation was not suppressed vigorously by the treatments. With the exception of DD and Vorlex at a high level, none of the treatments inhibited phosphatase in the hydrolysis of p-nitrophenyl disodium orthophosphate. A temporary decrease in nitrogenase activity in acetylene (C2H2) reduction was observed with many pesticides. The low amount of pesticides applied to the clay loam is unlikely to have detrimental effects on soil microbes and the enzymes important to soil fertility.     

Bioavailability and dissipation of fluridone under controlled conditions

Abstract

Bioavailability of fluridone, l‐methyl‐3‐phenyl‐5‐[3‐(trifluoromethyl) phenyl]‐4(1H)‐pyridinone, as affected by soil temperature, soil moisture regime, and duration of incubation was investigated in three soil types by grain sorghum (Sorghum bicolor [L.] Moench cv. Abu Sabien) chlorophyll bioassay. Initial loss of fluridone was rapid and dissipation followed first‐order kinetics under most of the incubation treatments investigated. Soil moisture, in general, had a greater impact than soil temperature on dissipation of fluridone. The herbicide dissipated faster at the fluctuating room temperature (18–24°C) than at the constant 10°C in Sonning sandy clay loam (O.M. = 1.2%) and Erl Wood sandy loam (O.M. = 2.5%) but not in Shropshire loamy peat (O.M. = 33%). In the two mineral soils, bioassay‐detectable residues from an initial rate of 1.00 μg/g were least (0.00 ‐ 0.10 μg/g) at 1/2 field capacity (FC) and greatest (0.16 ‐ 0.37 μg/g) at 1/4 FC, 400 days after treatment. At 10°C, the DT₅₀ values (days) at 1/4 FC and 1/2 FC were, respectively, 147 ± 16 and 69 ± 6 for Erl Wood soil, and 257 ± 28 and 51 ± 12 for Sonning soil. In Shropshire soil, concentrations of bioavailable fluridone were least at each bioassay date when soil moisture was maintained at FC, at both temperatures of incubation. At 10°C, herbicide concentrations in the organic soil from an initial rate of 10.00 μg/g were 0.95 and 4.69 μg/g, respectively, at FC and 1/4 FC.     

Dissipation of s-triazines and thiocarbamates from soil as related to soil moisture content

Half-lives (t1/2) of two soil incorporated s-triazines (atrazine and prometon) and two thiocarbamate (EPTC and triallate) herbicides were determined in relation to soil moisture content in two California soils. Treated soils were incubated at three moisture levels in aerated glass vials at 25 +/- 1 degree C and were analyzed at 0, 7, 16, 28, 56 and 112 day intervals. Loss of herbicides in all treatments followed first-order kinetics. The t1/2-values of all herbicides decreased with increasing soil moisture and followed an empirical equation, t1/2 = aM(-b) (where t1/2 is half-life; M the moisture content; and a and b are constants). Soil moisture had a greater effect on carbamates than on s-triazines . Prometon exhibited the longest half-life in both soils, whereas EPTC was least persistent in one soil and atrazine in another. The t1/2-values for atrazine, prometon, EPTC, and triallate with medium moisture levels and 10 microg/g concentration were 34.6, 43.2, 25.4 and 38.1 days in sandy loam and 26.5, 44.4, 44.1 and 25.9 days in loamy sand, respectively. Disappearance of 50% of the applied concentrations of most of the herbicide-soil combinations (except EPTC and triallate in one soil) took longer for lower initial concentrations (1 microg/g) than for higher concentrations (10 microg/g).     

Respiration induced by substrate and bacteria diversity after application of diuron,hexazinone, and sulfometuron-methyl alone and in mixture

Abstract

After application, herbicides often reach the soil and affect non-target soil microorganisms, decreasing their population, diversity or affecting metabolic activity. Therefore, laboratory studies were performed to evaluate the effects of diuron, hexazinone and sulfometuron-methyl alone and mixed upon carbon transformation by soil microorganisms in clayey and sandy soils and the effect on bacterial diversity and structure. Control treatment without herbicide application was also performed. Sub-samples from the control and herbicide treatments (10?g – in triplicate) were collected before herbicide application and 7, 14, 28 and 42?days after treatment (DAT), then 1?mL of ¹⁴C-glucose solution was applied. The released ¹⁴CO₂ was trapped in 2?M NaOH solution and the radioactivity was analyzed by liquid scintillation counting (LSC), 12?h after glucose application. The effect of herbicides on bacterial diversity was evaluated by T-RFLP. The experiment was conducted in a complete randomized design. Hexazinone did not affect ¹⁴CO₂ evolution. Diuron showed a greater ¹⁴CO₂ evolution in sandy and clayey soil, while sulfometuron-methyl led to an increase in sandy soil, at 42 DAT. A greater evolution of carbon was observed in the treatment with herbicide mixture in sandy soil, compared with the same treatment in clayey soil or control. However, the herbicide mixture application did not affect the soil biological activity measured by the respiration rate induced by substrate. On the other hand, the herbicide mixtures affected the bacterial diversity in both soils, being the strongest effect to diuron and sulfometuron-methyl in clayey soil and hexazinone in sandy soil.     

1H-NMR-based profiling of organic components in leachate from animal carcasses disposal site with time

Leachate, generated by the decomposition of animal carcasses, presents many environmental, sanitary, and food safety hazards. However, research on the characteristics of leachate is lacking. In this study, we performed biochemical profiling of leachate from two animal species (pig and cattle) in two soil types (sandy loam and sandy soil) using ¹H-NMR-based profiling, followed by multivariate data analysis. The leachate was collected from a well-controlled artificial burial site over a 31-week period. Principal components analysis (PCA) of the NMR data showed similar patterns between species and soil types. Organic components, including organic acids and phenols, predominated, and their levels increased with time. The methylamine level in leachate from pig carcasses 18 weeks following burial was significantly higher than that from cattle carcasses; leachate from cattle carcasses in sandy soil 1 week after burial contained unique components (specifically ethanol, formate, alanine, N-methylation, and taurine), in contrast with those from sandy loam soil. This study suggests that a NMR-based profiling approach is useful to characterize the organic components in leachate from animal carcasses over time.     

Dynamic chemical characteristics of soil solution after pig manure application: A column study

When manures from intensive livestock operations are applied to agricultural or vegetable fields at a high rate, large amounts of salts and metals will be introduced into soils. Using a column leaching experiment, this study assessed the leaching potential of the downward movement of Cu and Zn as well as some salt ions after an intensive farm pig manure at rates of 0%, 5% and 10% (w/w) were applied to the top 20 cm of two different textured soils (G soil -sandy loam soil; H soil-silty clay loam soil), and investigated the growth of amaranth and Cu and Zn transfer from soil to amaranth (Amaranthus tricolor). Soil solutions were obtained at 20, 40 and 60 cm depth of the packed column and analyzed for pH, electrical conductivity (EC), dissolved organic matter (DOC) and Cu and Zn concentrations. The results indicated that application of pig manure containing Cu and Zn to sandy loam soil might cause higher leaching and uptake risk than silty clay loam soil, especially at high application rates. And manure amendment at 5% and 10% significantly decreased the biomass of amaranth, in which the salt impact rather than Cu and Zn toxicity from manures played more important role in amaranth growth. Thus the farmer should avoid application the high rate of pig manure containing metal and salt to soil at a time, especially in sandy soil.     

Influence of Agricultural Antibiotics and 17β-Estradiol on the Microbial Community of Soil

Agricultural pharmaceuticals are a major environmental concern because of their hazardous effects on human and wildlife. This study analyzed phospholipid ester-linked fatty acids (PLFAs) and quinones to investigate the effects of a steroid (17β-estradiol) and agricultural antibiotics (chlortetracycline and tylosin) on soil microbes in the laboratory. Two different types of soil were used: Sequatchie loam (0.8% organic matter) and LaDelle silt loam (9.2% organic matter). The soils were spiked with 17β-estradiol and antibiotics, alone or in combination. In Sequatchie loam, 17β-estradiol significantly increased the microbial biomass, especially the biomarkers for beta proteobacteria (16:1ω7c, 18:1ω7c, Cy17:0, and UQ-8). The coexistence of antibiotics decreased the stimulatory effect of 17β-estradiol on the microbial community. In LaDelle silt loam, there were no significant differences in total microbial biomass and their microbial community structure among the treatments. Overall, 17β-estradiol changed the microbial community of soil and the presence of antibiotics nullified the effect of 17β-estradiol. However, the effects of 17β-estradiol and antibiotics on soil microbes were sensitive to the soil properties, as seen in the LaDelle silt loam.     

Degradation of Metribuzin in Two Soil Types of Lebanon

The degradation of metribuzin [4-amino-6-tert-butyl-3-methylthio-1,2,4-triazin-5(4H)-one] as influenced by soil type, temperature, humidity, organic fertilizers, soil sterilization, and ultra-violet radiation was studied in two soil types of Lebanon under laboratory conditions. The two soil types were sandy loam and clay. Deamination of metribuzin in the sandy loam soil to its deaminometribuzin (DA) derivative was basically a result of biological activity. In the clay soil the first metabolite diketometribuzin (DK) was a result of oxidative desulfuration, while diketo-deaminometribuzin (DADK) was the product of reductive deamination. The two soils represented major differences in the pesticide transformation processes. Photodecomposition on the soil surface and in aqueous media was also an important process in the degradation of metribuzin. Furthermore, the increase in soil organic matter enhanced degradation.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48–72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K _d) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.