Fenuron sorption on homoionic natural and modified smectites

The adsorption isotherms of fenuron (1,1-dimethyl-3-phenylurea) on three smectites (SWy and SAz montmorillonites and SH hectorite) differing in their layer charge (SH相似文献   

Methidathion Complexes with Homoionic and Surfactant-Modified Montmorillonites

Abstract

The formation of the insecticide methidathion (S-[(5-methoxy-2-oxo-1,3,4-thiadiazol-3(2H)-yl)methyl] O,O-dimethyl phosphorodithioate) complexes with inorganic cation-saturated (Mg²⁺, Ca²⁺, Cu²⁺, and Ni²⁺) montmorillonites was investigated. The nature and structure of the complexes was determined by X-ray diffraction and infrared spectroscopy. The arrangement of the pesticide molecule in the interlayer space was also considered from ab initio calculations using simpler related molecules. The insecticide methidathion penetrated the interlayer spaces of the homoionic clay samples. The ligand–cation interactions in these complexes depend on the nature and characteristics of the saturating cations. Mechanisms involving water bridges and direct coordination with the exchange cation were proposed for the adsorption of methidathion by inorganic cation-saturated montmorillonites. The effect of the inorganic cations on the sorption of the cationic surfactant tetradecyltrimethylammonium bromide (TDTMA) by montmorillonite was also studied and the subsequent sorption of methidathion in TDTMA⁺-Montmorillonite determined. Van der Waals bonds constitute the methidathion adsorption mechanism by montmorillonite saturated with TDTMA⁺. The arrangements of methidathion and of the cationic surfactant molecules in the montmorillonite interlayer space were demostrated.     

Sorption of hydrophobic organic compounds onto organoclays

The behavior and fate of nonionic hydrophobic organic compounds (HOCs) in the environment are mainly controlled by their interactions with various components of soils and sediments. Due to their large surface area and abundance in many soils, smectites may greatly influence the fate and transport of the contaminants in the environment. In our experiments, HOC sorption by hexadecyltrimethylammonium (HDTMA)-modified smectite linearly increased with the amount of HDTMA added to the clay. However, tetramethylammonium (TMA)- and dodecyltrimethylammonium (DTMA)-modified smectites showed not only inferiority in their sorption of HOC compared with the HDTMA-smectite, but also a partially decreased HOC sorption at specific surfactant loading levels. This means that the sorption of organoclays for organic contaminants was significantly influenced by the amount and size of the surfactants added on the clay. In addition, it seems that the interlayer structure (e.g., pore size) formed at each surfactant loading level plays an important role to adsorb HOC in different amount.     

Methidathion complexes with homoionic and surfactant-modified montmorillonites

The formation of the insecticide methidathion (S-[(5-methoxy-2-oxo-1,3,4-thiadiazol-3(2H)-yl)methyl] O,O-dimethyl phosphorodithioate) complexes with inorganic cation-saturated (Mg2+, Ca2+, Cu2+, and Ni2+) montmorillonites was investigated. The nature and structure of the complexes was determined by X-ray diffraction and infrared spectroscopy. The arrangement of the pesticide molecule in the interlayer space was also considered from ab initio calculations using simpler related molecules. The insecticide methidathion penetrated the interlayer spaces of the homoionic clay samples. The ligand-cation interactions in these complexes depend on the nature and characteristics of the saturating cations. Mechanisms involving water bridges and direct coordination with the exchange cation were proposed for the adsorption of methidathion by inorganic cation-saturated montmorillonites. The effect of the inorganic cations on the sorption of the cationic surfactant tetradecyltrimethylammonium bromide (TDTMA) by montmorillonite was also studied and the subsequent sorption of methidathion in TDTMA+-Montmorillonite determined. Van der Waals bonds constitute the methidathion adsorption mechanism by montmorillonite saturated with TDTMA+. The arrangements of methidathion and of the cationic surfactant molecules in the montmorillonite interlayer space were demonstrated.     

Sorption of chlorimuron-ethyl on montmorillonite clays: effects of exchangeable cations,pH, and ionic strength

Sorption interaction of chlorimuron-ethyl with montmorillonite clays was investigated under varied types of exchangeable cation, pH, and ionic strength conditions. Chlorimuron-ethyl sorption on bentonites exhibited pronounced cation dependency, and the sorption ability increased as the sequence Ca²⁺- < Na⁺- < Al³⁺- < Fe³⁺-bentonite, due to different sorption mechanisms, whereas the cation dependency was influenced by the clay type and much weaker for montmorillonites. The decrease of pH at the range of 4.0–6.0 prominently increased sorption of chlorimuron-ethyl on all cation-exchanged montmorillonite clays, and nearly a neglected sorption (about 2 %) can be observed at pH over 7.0. In the presence of CaCl₂, sorption of chlorimuron-ethyl on Fe³⁺-bentonite was promoted because of complexion of Ca²⁺ and the surface of Fe³⁺-bentonite. However, as the concentration of CaCl₂ increased, chlorimuron-ethyl sorption on Ca²⁺- and Fe³⁺-exchanged bentonite decreased, suggesting that Ca bridging was not the prevailing mechanism for sorption of chlorimuron-ethyl on these clays. Furthermore, chlorimuron-ethyl sorption was relatively sensitive to pH, and the change of pH may obscure effect of other factors on the sorption, so it was quite necessary to control pH at a constant value when the effect of other factor was being studied.     

Sorption of heterocyclic compounds from a complex mixture of coal-tar compounds on natural clayey till

The sorption and desorption of heterocyclic organic compounds in a complex multisolute system to a natural clayey till was investigated. The composition of the solutes reflect a simplified composition of an aqueous phase in contact with coal tar. Sorption was studied for two ratios (s:l) of clayey till (solid) to aqueous phase (liquid). The effect of the complex mixture of solutes on sorption of the four heterocyclic compounds: benzofuran, dibenzofuran, benzothiophene, and dibenzothiophene is evaluated by comparison with their sorption measured in single-solute systems. Sorption of the four compounds is affected by the complex mixture, with sorption decreases for all four compounds at high s:l ratio indicating competitive sorption. The effect on sorption of the individual compounds is not related to solubility or hydrophobicity of the compounds. Freundlich-type isotherms are observed for all compounds in the high s:l-ratio experiments, but for the most hydrophobic compounds isotherms are close to linear. The sorption of N-compounds and benzofuran is apparently influenced by cation exchange and dipole–dipole attraction to clay minerals. At high concentrations a dramatic increase in the sorption of the most strongly sorbing compounds is observed in the low s:l-ratio experiment. The dramatic increase in sorption appears to be a result of multimolecular layer sorption or condensation on surfaces in the clayey till at high surface density of organic compounds, and the data are fitted by BET (Brunauer, Emmet, and Teller) type 2 isotherms. The increase may or may not be induced by the presence of N-heterocyclic compounds sorbed by cation exchange and dipole–dipole attraction. The desorption of the compounds was studied for the low s:l ratio where multimolecular layer formation apparently had occurred. Partially irreversible sorption, hysteric Langmuir type desorption with isotherms of very high K_l coefficient, or behaviour reflecting dissolution of a condensed phase is observed.     

Simultaneous sorption of lead and chlorobenzene by organobentonite

Clays or organoclays have been used as a barrier to prevent the transport of hazardous contaminants in landfills. However, clays are known to effectively sorb mostly inorganic contaminants, while organoclays are mainly used for organic contaminants. Since the organoclays are basically clay particles modified with cationic surfactants, there might exist an optimal coverage of cationic surfactant on the clay particles to sorb both inorganic and organic contaminants. In order to determine the optimal mass of cationic surfactants on the bentonites, sodium bentonites were treated with various ratios of hexadecyltrimethylammonium (HDTMA) to bentonites. Chlorobenzene and lead were selected as representative contaminants. When either chlorobenzene or lead exists as a single contaminant, chlorobenzene sorption increased with increasing HDTMA to bentonite ratios, and lead sorption decreased with increasing HDTMA to bentonite ratios. Sorption of chlorobenzene was a function of HDTMA coverage on the bentonites, while lead sorption was much more influenced by the initial lead concentration rather than the mass of HDTMA added to the bentonites.     

Geochemical modeling of cadmium sorption to soil as a function of soil properties

Cadmium sorption experiments were conducted to infer Cd sorption mechanisms to a reference smectite and three fractions of a Vertisol soil. Untreated Vertisol has a higher adsorption capacity for Cd than that of reference smectite. Surface complex modeling was used to calculate the potential contributions of Cd complexation reactions with permanent charge sites and pH-dependent charge sites over ranges in pH, for soils with given surface areas, and sorption site densities. The Langmuir model produced relatively good predictions of Cd sorption on reference smectite and Vertisol. However, the results of the triple-layer model (TLM) were inadequate to describe Cd adsorption on fixed-charge sites because the model could not account for the ion-exchange reaction on the basal plane. Based upon the two geochemical models of Cd adsorption to the reference smectite and Vertisol, it appears that the basal plane siloxane cavities are the most important sites for Cd complexation at pH < 6.5. For the pH-dependent sites, the edge-site aluminol appears to be the dominant surface functional group responsible for Cd adsorption at pH > 6.5.     

Studies on the sorption and desorption characteristics of Zn(II) on the surface soils of nuclear power plant sites in India using a radiotracer technique

Zinc adsorption was studied in the soils of three nuclear power plant sites of India. 65Zn was used as a radiotracer to study the sorption characteristics of Zn(II). The sorption of zinc was determined at 25 and 45 degrees C at pH 7.8+/-0.2 in the solution of 0.01 M Ca(NO3)2 as supporting electrolyte. The sorption data was tested both in Freundlich and Langmuir isotherms and could be described satisfactorily. The effect of organic matter and other physico-chemical properties on the uptake of zinc was also studied in all the soil samples. The results showed that the cation exchange capacity, organic matter, pH and clay content were the main contributors to zinc sorption in these soils. The adsorption maximum was found to be higher in the soil on Kakarpara Atomic Power Plant sites soils having high organic matter and clay content. The zinc supply parameters of the soils are also discussed. In the desorption studies, the sequential extraction of the adsorbed zinc from soils showed that the diethylene triamine penta acetic acid extracted maximum amount of adsorbed zinc than CaCl2 and Mg(NO3)2. The zinc sorption on the soil and amount of zinc retention after extractants desorption shows a positively correlation with vermiculite and smectite mineral content present in the clay fraction of the soil. The amount desorbed by strong base (NaOH) and demineralised water was almost negligible from soils of all the sites, whereas the desorption by strong acid (HNO3) was 75-96% of the adsorbed zinc.     

Isotherms and sequential extraction procedures for evaluating sorption and distribution of heavy metals in soils

Heavy metals are potentially toxic to human life and the environment. Their contaminating effect in soils depends on chemical associations. Hence, determining the chemical form of a metal in soils is important to evaluate its mobility and bioavailability. We utilized a sequential extraction procedure and sorption isotherms (monometal and competitive) to evaluate the mobility and distribution of Cd, Cu, Ni, Pb, and Zn in four soils differing in their physicochemical properties: Calcixerollic Xerochrepts (Cx1 and Cx2), Paralithic Xerorthent (Px) and Lithic Haplumbrept (Lh). Most of the metals retained under point B conditions of sorption isotherms were extracted from the more mobile fractions: exchangeable and carbonates, in contrast with the profiles of the original soils where metals were preferently associated with the residual fraction. In soils having carbonate concentration under 6% (Cx1 and Lh), the exchangeable fraction was predominant, whereas in calcareous soils (Cx2 and Px) metals extracted from carbonates predominated. Partitioning profiles were in accordance with the affinity sequences deduced from the initial slope of isotherms and showed that the soils had a greater number of surface sites and higher affinity for Pb and Cu than for Cd, Ni, or Zn. In general, the simultaneous presence of the cations under study increased the percentages of metals released in the exchangeable fraction. The tendency towards less specific forms was more noticeable in Cx2 and Px soils and for Ni, Zn, and Cd. The affinity of inorganic surfaces was larger for Zn than for Cd or Ni, but the affinity of organic surfaces was larger for Cd or Ni than for Zn.     

阴-阳离子有机膨润土吸附水中苊的性能及机理研究

用溴化十二烷基三甲铵（DTMAB）、十二烷基硫酸钠（SDS）、十二烷基苯磺酸钠（SDBS）按不同配比制得一系列阴一阳离子有机膨润土,研究了有机膨润土吸附水中苊的性能及机理。结果表明,阴一阳离子有机膨润土对水中苊的吸附去除能力大于单阳离子有机膨润土,且与改性时所用阴离子表面活性剂的种类、浓度有关;阴一阳离子有机膨润土对苊的吸附等温线呈线性,吸附机理主要是分配作用。     

A generalised sorption model for the concentration dependent uptake of caesium by argillaceous rocks

A three-site cation exchange model is proposed to describe the concentration dependent uptake of Cs on natural argillaceous rock systems. Major premises in the model are that the sorption of Cs is dominated by the illite mineral component in the rock and that there is a fixed relationship between the site capacities of the three site types denoted as frayed edge, type II and planar sites. The definition of a “reference illite” with a cation exchange capacity of 0.2 equiv. kg^-1 allows the three site capacities to be fixed in the model calculations over the weight fraction of illite in the argillaceous rocks. Up to Cs equilibrium concentrations of 10^-3 M sorption occurs predominantly on the frayed edge and type II sites (higher affinity sites), with the planar site type playing only a minor role. Competition with Cs for sorption on the former two site types arises predominantly from monovalent cations such as K, Rb and NH₄ which have low hydration energies. H and Na (except at high concentrations) are considerably less competitive and bivalent cations such as Mg, Ca and Sr are effectively non-competitive. A consistent set of selectivity coefficients for Cs with respect to K, Rb, NH₄ and Na was derived from analyses and modelling of a wide range of Cs sorption data available in the open literature on pure illites from many different sources. The model was tested against four Cs sorption isotherm data sets determined on argillaceous rocks: Boom clay, Oxford clay, Palfris marl and Opalinus clay. The water chemistries and illite contents given in these experiments allowed the Cs sorption isotherms to be predicted. It is concluded that the Cs sorption model presented here, in which there are no free parameters, can be used to predict the uptake of Cs at equilibrium concentrations below 10^-3 M to within a factor of 2 to 3 in natural argillaceous rock systems.     

Enhancement of phosphorus sorption onto light expanded clay aggregates by means of aluminum and iron oxide coatings

Phosphorus (P) loading from non-point or point sources increases the eutrophication risk of natural waters. The functioning of constructed wetlands (CWs) used as natural water treatment systems can be improved by means of additional materials adsorbing soluble P. In this study, light expanded clay aggregates (LECA) and LECA coated with aluminum (Al) oxide (Al-LECA) or iron (Fe) oxide (Fe-LECA) were tested for their efficiency as P sorbents in the pH range 3–8. The oxide coatings duplicated the actual sorption capacity calculated from the sorption isotherms at the P concentration in the equilibrium solution of 20 μg L⁻¹, assumed to be the allowable P level in purified water. In the oxide-coated LECAs the sorption was fast and followed both the first- and second-order Lagergren kinetic models, suggesting that the formation of a binuclear surface complex was feasible. In LECA, sorption was markedly slower and followed the first-order kinetic model, indicating that retention occurred through a monodentate attachment. These findings were in harmony with the degree of P saturation (DPS) of the sorbent surfaces at the highest P addition level (200 μg L⁻¹), DPS being decisively higher for LECA than for the oxide-coated sorbents. Accordingly, at higher pH values the competition by hydroxyl ions diminished the sorption in LECA relatively more than that in the coated sorbents. In agreement with the acidity of Al³⁺ being 100 times lower than that of Fe³⁺, at elevated pH the sorption by Al-LECA proved to be less reversible than that by Fe-LECA. The results provide evidence that in CWs Al-coated sorbents are superior to Fe-coated ones that are also redox-sensitive and may lose their sorption properties in anoxic conditions.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48–72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K _d) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.     

Experimental and modeling studies on sorption and diffusion of radium in bentonite

The sorption and desorption behavior of radium on bentonite and purified smectite was investigated as a function of pH, ionic strength and liquid to solid ratio by batch experiments. The distribution coefficients (Kd) were in the range of 10(2) to > 10(4) ml g-1 and depended on ionic strength and pH. Most of sorbed Ra was desorbed by 1 M KCl. The results for purified smectite indicated that Ra sorption is dominated by ion exchange at layer sites of smectite, and surface complexation at edge sites may increase Ra sorption at higher pH region. Reaction parameters between Ra and smectite were determined based on an interaction model between smectite and groundwater. The reaction parameters were then used to explain the results of bentonite by considering dissolution and precipitation of minerals and soluble impurities. The dependencies of experimental Kd values on pH, ionic strength and liquid to solid ratio were qualitatively explained by the model. The modeling result for bentonite indicated that sorption of Ra on bentonite is dominated by ion exchange with smectite. The observed pH dependency was caused by changes of Ca concentration arising from dissolution and precipitation of calcite. Diffusion behavior of Ra in bentonite was also investigated as a function of dry density and ionic strength. The apparent diffusion coefficients (Da) obtained in compacted bentonite were in the range of 1.1 x 10(-11) to 2.2 x 10(-12) m2 s-1 and decreased with increasing in dry density and ionic strength. The Kd values obtained by measured effective diffusion coefficient (De) and modeled De were consistent with those by the sorption model in a deviation within one order of magnitude.     

Sorption of cyromazine on humic acid: Effects of pH,ionic strength and foreign ions

Cyromazine (CY) is a triazine pesticide used as an insect growth inhibitor for fly control in cattle manure, field crops, vegetables, and fruits. Sorption of CY onto humic acid (HA) may affect its environmental fate. In this study, HA was used to investigate the sorption of CY at different solution chemistry conditions (pH, ionic strength) and in the presence of foreign ions and norfloxacin. All sorption isotherms fitted well with the Freundlich and Langmuir models. The sorption reached a maximum at initial pH 4.0 over the initial pH range of 3.0–7.0, implying that the primary sorption mechanism was cation exchange interaction between CY⁺ species and the negatively charged functional groups of HA. Increasing Ca²⁺ concentration resulted in a considerable reduction in the K _d values of CY, hinting that Ca²⁺ had probably competed with CY⁺ for the cation exchange sites on the surfaces of HA. The sorption of CY on HA in different ionic media followed the order of NH₄Cl ≈ KCl > K₂SO₄ > ZnCl₂ ≈ CaCl₂ at pH 5.0. Spectroscopic evidence demonstrated that the amino groups and triazine ring of CY was responsible for sorption onto HA, while the carboxyl group and the O-alkyl structure of HA participated in adsorbing CY.     

Influence of competing inorganic cations on the ion exchange equilibrium of the monovalent organic cation metoprolol on natural sediment

The aim of this study was to systematically investigate the influence of the mono- and divalent inorganic ions Na⁺ and Ca²⁺ on the sorption behavior of the monovalent organic cation metoprolol on a natural sandy sediment at pH = 7. Isotherms for the beta-blocker metoprolol were obtained by sediment–water batch tests over a wide concentration range (1–100 000 μg L^?1). Concentrations of the competing inorganic ions were varied within freshwater relevant ranges. Data fitted well with the Freundlich sorption model and resulted in very similar Freundlich exponents (n = 0.9), indicating slightly non-linear behavior. Results show that the influence of Ca²⁺ compared to Na⁺ is more pronounced. A logarithmic correlation between the Freundlich coefficient K_Fr and the concentration or activity of the competing inorganic ions was found allowing the prediction of metoprolol sorption on the investigated sediment at different electrolyte concentrations. Additionally, the organic carbon of the sediment was completely removed for investigating the influence of organic matter on the sorption of metoprolol. The comparison between the experiments with and without organic carbon removal revealed no significant contribution of the organic carbon fraction (0.1%) to the sorption of metoprolol on the in this study investigated sediment. Results of this study will contribute to the development of predictive models for the transport of organic cations in the subsurface.     

Sorption and desorption of imidazolium based ionic liquids in different soil types

This study investigates the influence of the two different clay minerals kaolinite and smectite as well as of organic matter on the cation sorption and desorption behaviour of three imidazolium based ionic liquids -1-butyl-3-methyl-imidazolium tetrafluoroborate (IM14 BF(4)), 1-methyl-3-octyl-imidazolium tetrafluoroborate (IM18 BF(4)) and 1-butyl-3-methyl-imidazolium bis[(trifluoromethyl)sulfonyl]imide (IM14 (CF(3)SO(2))(2)N) - in soil. The German standard soil Lufa 2.2 - a natural soil classified as a loamy sand - was the basis substrate for the different soil compositions and also served as a reference soil. The addition of organic matter and clays increases the sorption of the substances and in particular smectite had striking effects on the sorption capacity for all three ionic liquids indicating that ionic interactions play an important role for sorption and desorption processes of ionic liquids in soil. One exception was for kaolinite-containing soils and the IM14 cation: with (CF(3)SO(2))(2)N(-) as an anion the sorption was identical at either 10 wt% or 15 wt% clay content, and with BF(4)(-) sorption was even lower at 15 wt% kaolinite than at 10 wt%. Desorption was weak for IM18 BF(4), presumably owing to the longer alkyl side chain. With regard to the influence of kaolinite on desorption, the same pattern was observed as it was found for the sorption of IM14 BF(4) and IM14 (CF(3)SO(2))(2)N.     

Sorption of 3,4-dichloroaniline on four contrasting Greek agricultural soils and the effect of liming

Sorption of 3,4-dichloroaniline (3,4-DCA) on four typical Greek agricultural soils, with distinct texture, organic matter content and cation exchange capacities, was compared by using sorption isotherms and the parameters calculated from the fitted Freundlich equations. The sorption process of 3,4-DCA to the soil was completed within 48-72 h. The 3,4-DCA sorption on all soils was well described by the Freundlich equation and all sorption isotherms were of the L-type. The sandy clay loam soil with the highest organic matter content and a slightly acidic pH was the most sorptive, whereas the two other soil types, a high organic matter and neutral pH clay and a low organic matter and acidic loam, had an intermediate sorption capacity. A typical calcareous soil with low organic matter had the lowest sorption capacity which was only slightly higher than that of river sand. The 3,4-DCA sorption correlated best to soil organic matter content and not to clay content or cation exchange capacity, indicating the primary role of organic matter. The distribution coefficient (K(d)) decreased with increasing initial 3,4-DCA concentration and the reduction was most pronounced with the highly sorptive sandy clay loam soil, suggesting that the available sorption sites of the soils are not unlimited. Liming of the two acidic soils (the sandy clay loam and the loam) raised their pH (from 6.2 and 5.3, respectively) to 7.8 and reduced their sorption capacity by about 50 %, indicating that soil pH may be the second in importance factor (after organic matter) determining 3,4-DCA sorption.