An empirically derived taxonomy of pilot violation behavior

Violations occur when pilots deliberately break safety rules; they are a serious and vexing problem in aviation. Study one engaged cluster analysis, multidimensional scaling and Pathfinder network analysis on an experimentally derived similarity matrix of violation causes to discover the structure of violation reasoning. Using the insights so gained, a classification was constructed based on actor intent with four categories:

•

Improvement. The intention is to increase safety or production, a desire to do better.

•

Malevolent. The intention is to cause harm or reduce production, a desire to do damage.

•

Indolent. The intention is to increase operator ease, a desire for lethargy.

•

Hedonic. The intention is to increase operator excitement, a desire for sensation.

Study two tested the taxonomy for reliability by having aviation experts assign categories to six accident reports. The taxonomy was found to have a free-marginal multirater kappa of 0.82, which is considered excellent.     

Fall from equipment injuries in U.S. mining: Identification of specific research areas for future investigation

Introduction

The objective of this study was to evaluate the circumstances leading to fall from equipment injuries in the mining industry.

Method

The 2006 and 2007 Mine Safety and Health Administration annual injury databases were utilized for this study whereby the injury narrative, nature of injury, body part injured, mine type, age at injury, and days lost were evaluated for each injury.

Results

The majority of injuries occurred at surface mining facilities (∼ 60%) with fractures and sprains/strains being the most common injuries occurring to the major joints of the body. Nearly 50% of injuries occurred during ingress/egress, predominately during egress, and approximately 25% of injuries occurred during maintenance tasks. The majority of injuries occurred in relation to large trucks, wheel loaders, dozers, and conveyors/belts. The severity of injury was independent of age and the median days lost was seven days; however, there was a large range in severity.

Impact on industry

From the data obtained in this study, several different research areas have been identified for future work, which include balance and stability control when descending ladders and equipment design for maintenance tasks.     

Occupational injuries of immigrant and Finnish bus drivers

Problem

With baby boomers reaching retirement age, Western countries may need more immigrant workers to ensure productivity. Many studies have suggested a higher occupational injury frequency among immigrant workers, which could considerably reduce their contribution to society. The aim of this study was to examine whether immigrant workers have a higher injury frequency compared to Finnish workers when performing the exact same tasks under the same working conditions.

Method

A total of 176 Finnish and 130 immigrant bus drivers were asked about their occupational injuries during the past 12 months via a questionnaire. In addition, the data contained 134 injuries reported by the transport firm to an insurance company.

Results

There was no significant difference in reporting occupational injuries by self-reporting or by company-records. Because there were more accident-repeaters among Finnish drivers, their injury frequency (114) was higher than that of immigrant drivers (78).

Application/Impact

This study showed that immigrant workers did not have a higher injury frequency than other workers when they worked in the exact same conditions. Immigrant workers can work as safely as native-Finnish workers, when their working conditions and job contracts are at the same level as those of the original population. Immigrant workers can compensate for the shortage of workforce caused by an aging population.     

What kinds of injuries do OSHA inspections prevent?

Objective

OSHA's enforcement program is one of the major public efforts to protect American workers. We examine both the scope of injury prevention that inspections can contribute and the types of standards that contribute the most.

Methods

We linked Pennsylvania Department of Labor and Industry files for lost-time injuries and employment to calculate injury rates for 1998-2005 for all single-establishment manufacturing firms. We linked these to OSHA inspection records.

Results

Inspections with penalties did affect injury types unrelated to standards as well as those related. We also found again that citations for violations of the standard requiring personal protective equipment had the largest impact on preventing injuries.

Impact on Industry

Programs requiring protective equipment use deserve added attention from consultants and inspectors. In addition, some inspections spur managers to undertake safety measures that go beyond compliance with standards.     

Occupant injury severity from lateral collisions: A literature review

Problem

Side impacts are a serious automotive injury problem; they represent about 30% of all fatalities for passenger vehicle occupants. This literature review focuses on occupant injuries resulting from real lateral collisions. It emphasizes the interaction between injury patterns and crash factors, taking into account type of injuries and their severity. It highlights what is known on the subject and suggests further studies.

Method

We reviewed papers identified by searches in two electronic databases for the 1996-2009 publication period, and in specific journals and conference proceedings.

Results

Studies on the Primary Direction of Force (PDOF) have revealed that fatal crashes occur most frequently when the PDOF is at 3 or 9 o'clock. The risk of serious injury is two to three times higher for the near-side occupant than for the far-side occupant. Head injuries predominate in oblique impacts and thoracic injuries in perpendicular ones. A few results are also reported on side airbag protection.

Conclusions

This literature review presents an overall picture of the injuries caused by lateral collisions, though each of the papers or articles examined focuses mostly on some particular aspect of the problem. The incidence of specific injuries depends on the data source used. Very few population-based analyses of lateral collision injuries were found.

Impact on industry

New studies are needed to evaluate new protective devices (e.g., lateral airbags, inflatable curtains). Without interfering with their care duties, Emergency Medical Technicians could be systematically trained to observe the collision's specific characteristics and to report all their relevant observations to the emergency physicians to increase the likelihood of prompt diagnosis and proper care.     

Evaluating repeated patient handling injuries following the implementation of a multi-factor ergonomic intervention program among health care workers

Objective

The objective of this study was to evaluate repeated patient handling injuries following a multi-factor ergonomic intervention program among health care workers.

Methods

This was a quasi-experimental study which had an intervention group and a non-randomized control group. Data were collected from six hospitals in Saskatchewan, Canada from September 1, 2001 to December 1, 2006.

Results

A total of 1,480 individuals who had a previous injury were eligible for the study. Medium and small size hospitals in the intervention group had significantly fewer repeated injuries than in the control group. Multivariate analysis showed that the intervention group had 38.1% lower odds of having repeated injury compared to the control group, after adjusting for hospital size.

Conclusions

The work-related repeated injury after a multi-factor intervention program was reduced. The synergistic relationships between components of multi-factor intervention and applicability of injury prevention programs to different settings need to be further explored.

Impact on Industry

Implementing a multi-factor program with the right equipment and training can lower the risk of injury among health care workers.     

Integrated model of simulated occupant injury risk and real medical costs

Introduction

The purpose of this study was to develop an integrated methodology that links occupant injury risk functions, estimated in the laboratory, with real world medical treatment costs by using the abbreviated injury score (AIS). Using our model, the expected medical treatment costs for crash injuries to various body regions and of different severities can be investigated.

Methods

First, the simulation results are compared with NHTSA crash data. We used a modified kinematics simulation model that incorporates an F = E^b function as a supplement to the previous Steffan's model to obtain a more accurate acceleration history a(t). Second, head injury criteria HIC₃₆ can be calculated from a(t), and we use the injury probability P as a function of HIC_36, as proposed by Kuppa, to obtain the injury risk function for various AIS values. Third, medical treatment cost models for various AIS values can be calculated by using a regression cost model with real world data. Finally, the injury risk function and medical treatment cost models are linked through AIS values. We establish an integrated methodology and predict medical costs and car safety data using real world police reports, medical treatment costs, and laboratory simulation results.

Results

Using head injuries in frontal crashes as an example, we focus on simulation parameters for different vehicle models, with and without airbags. We specifically examine impact closing speed, Delta-V, and impact directions.

Conclusion

Simulation results can be used to supplement insufficient real crash data, in particular ΔV, and injury risk results from police crash reports.

Impact on industry

The proposed integrated methodology may provide the vehicle industry with a new safety assessment method. Real crash data coupling provides consumers with more realistic and applicable information.     

Motorcycle fuel tanks and pelvic fractures: A motorcycle fuel tank syndrome

Objective: Pelvic injuries are a serious and commonly occurring injury to motorcycle riders involved in crashes, yet there has been limited research investigating the mechanisms involved in these injuries. This study aimed to investigate the mechanisms involved in pelvic injuries to crashed motorcyclists.

Method: This study involved in-depth crash investigation and 2 convenience-based data sets were used. These data sets investigated motorcycle crashes in the Sydney, Newcastle, and Adelaide regions. Participants included motorcycle riders who had crashed either on a public road or private property within the study areas. The mechanism of injury and the type of injuries were investigated.

Results: The most frequent cause of pelvic injuries in crashed motorcyclists was due to contact with the motorcycle fuel tank during the crash (85%). For riders who had come into contact with the fuel tank, the injury types were able to be grouped into 3 categories based on the complexity of the injury. The complexity of the injury appeared to increase with impact speed but this was a nonsignificant trend. The pelvic injuries that did not occur from contact with the fuel tank in this sample differed in asymmetry of loading and did not commonly involve injury to the bladder. They were commonly one-sided injuries but this differed based on the point of loading; however, a larger sample of these injuries needs to be investigated.

Conclusion: Overall improvements in road safety have not been replicated in the amelioration of pelvic injuries in motorcyclists and improvements in the design of crashworthy motorcycle fuel tanks appear to be required.     

Trends in occupational injuries and fatality in Turkey

Introduction. The aim of this study was to evaluate the trend of occupational injuries in Turkey using epidemiologic criteria such as incidence mortality and fatality/all injuries recorded – rates. Materials and methods. Safety and health data were obtained from the Annual Statistic Books of the Social Insurance Institution (1988–2006) and Social Security Institution (2007–2011) of Turkey. Results. The results from the official data showed that although total employment is increasing the number of occupational injuries and incidence and mortality rates are decreasing. The results also demonstrate that occupational fatality/all injuries recorded – rate is increasing. The fatality/all injuries recorded – rate per 1000 injuries increased to 25.5 in 2011 from 8.6 in 1988. Each work day an average of five people died because of occupational injuries. Discussion and conclusions. The fatality/all injuries recorded – rate (the number of fatal cases per 1000 occupational injuries) is an important indicator of the injury rate for a country. Systems of occupational injury and illness surveillance constitute a critical resource for the management and reduction of occupational injuries and illness.     

Bicycle helmet use among children in the United States: The effects of legislation, personal and household factors

Introduction

Children ages 5-14 years have the highest rate of bicycle-related injuries in the country. Bicycle helmets can prevent head and brain injuries, which represent the most serious type of bicycle-related injury.

Objectives

This paper compares children's bicycle helmet use to that estimated from an earlier study, and explores regional differences in helmet use by existing helmet legislation.

Methods

This study was a cross-sectional, list-assisted random-digit-dial telephone survey. Interviews were completed by 9,684 respondents during 2001-2003. The subset with at least one child in the household age 5-14 years (2,409 respondents) answered questions about bicycle helmet use for a randomly selected child in their household.

Results

Almost half (48%) of the children always wore their helmet, 23% sometimes wore their helmet, and 29% never wore their helmet. Helmet wearing was significantly associated with race, ethnicity, and child age but was not associated with the sex of the child. Other significant predictors of use included household income, household education, census region, and bicycle helmet law status. Statewide laws were more effective than laws covering smaller areas. The proportion of children who always wore a helmet increased from 25% in 1994 to 48% in 2001-2002. Significant increases in helmet use from 20% to 26% were seen among both sexes, younger (5-9 years) and older (10-14 years) children, and in all four regions of the country.

Conclusions

While there has been substantial progress in the number of children who always wear their helmets, more than half do not. Further progress will require using a combination of methods that have been shown to successfully promote consistent helmet use. Impact on industry: minimal.     

Prevention of occupational injuries: Evidence for effective good practices in foundries

IntroductionOccupational injuries are a relevant research and practical issue. However, intervention studies evaluating the effectiveness of workplace injury prevention programs are seldom performed. Method: The effectiveness of a multifaceted intervention aimed at reducing occupational injury rates (incidence/employment-based = IR, frequency/hours-based = FR, severity = SR) was evaluated between 2008 and 2013 in 29 Italian foundries (22 ferrous; 7 non-ferrous; 3,460 male blue collar workers/year) of varying sizes. Each foundry established an internal multidisciplinary prevention team for risk assessment, monitoring and prevention of occupational injuries, involving employers, occupational physicians, safety personnel, workers' representatives, supervisors. Targets of intervention were workers, equipment, organization, workplace, job tasks. An interrupted time series (ITS) design was applied. Results: 4,604 occupational injuries and 83,156 lost workdays were registered between 2003 and 2013. Statistical analysis showed, after intervention, a reduction of all injury rates (− 26% IR, − 15% FR, −18% SR) in ferrous foundries and of SR (− 4%) in non-ferrous foundries. A significant (p = 0.021) ‘step-effect’ was shown for IR in ferrous foundries, independent of secular trends (p < 0.001). Sector-specific benchmarks for all injury rates were developed separately for ferrous and non-ferrous foundries. Conclusions: Strengths of the study were: ITS design, according to standardized quality criteria (i.e., at least three data points before and three data points after intervention; clearly defined intervention point); pragmatic approach, with good external validity; promotion of effective good practices. Main limitations were the non-randomized nature and a medium length post-intervention period. In conclusion, a multifaceted, pragmatic and accountable intervention is effective in reducing the burden of occupational injuries in small-, medium- and large-sized foundries. Practical Applications: The study poses the basis for feasible good practice guidelines to be implemented to prevent occupational injuries, by means of sector-specific numerical benchmarks, with potentially relevant impacts on workers, companies, occupational health professionals and society at large.     

An epidemiologic comparison of injuries presenting to a pediatric emergency department and local urgent care facilities

Problem

The objective of this study was to compare the epidemiology of injuries presenting to emergency department (ED) and urgent care (UC) facilities of a single, NEISS-affiliated hospital.

Method

Patient medical records (n = 36,811) were used to compare injury incidence, injury characteristics, and demographic characteristics between the ED, on-site UC, and off-site UC during 2006.

Results

ED presentations were more likely to be open wounds and motor vehicle-related compared to on-site UC presentations. ED presentations were more likely to be system wide/late effects, be made by an African American, or be paid through Medicaid compared to off-site UC presentations. On-site UC presentations were more likely to be made by an African American or be paid through Medicaid compared to off-site UC presentations.

Discussion

ED and UC injury characteristics and patient demographics differ. With no nationally-representative UC injury surveillance, current research likely underestimates injury incidence and presents skewed profiles. Impact on Industry: This article adds insight into the generalizability of ED-based injury surveillance to UC injuries.