A Contribution to the Study of the Antidust Respirators’ Real Performance

In most industrial enterprises, hazardous factors are present in quantities exceeding permissible levels. Such a situation requires using antidust respiratory protection. It has been suggested, however, that filters for respirators are not assessed properly and that lab results might not be related to real filtering efficiency in industry. This article contains test results of some commercially available filtering half-masks, including the effect of loading with real dust, high humidity, high temperature, and a combination of loading with dust and high humidity on the half-masks’ performance. The results show that the effect of these factors is considerable and that a combination of loading with silica dust and exposing to high humidity can cause a complete loss of performance.     

Prevalence of Musculoskeletal Disorders at Workplaces in the People’s Republic of China

This paper presents 2 musculoskeletal disorders questionnaire surveys in 10 different Chinese occupational groups. Data collected from 1,603 workers using a modified Nordic musculoskeletal disorders symptom questionnaire showed that the 12-month prevalence of musculoskeletal disorders, particularly in the low back and shoulder-neck regions, was high at many Chinese workplaces. Significant differences existed between occupational groups. Assembly workers usually had higher neck-shoulder complaints compared to workers in most other occupations. However, the nature of assembly seemed also to influence the prevalence rate. Workers at a cassette recorder and a TV set assembly plant appeared to have more neck complaints compared with a group of thermos flask assemblers.     

Biomechanical Consequences of the Hand’s Action on Unstable Handle

The concept of muscular stabilization refers to imposing active muscular constraints on the joint degrees of freedom that are not used in a given motor task and the stabilization of unstable working objects. The human organism bears considerable cost due to the realization of this process, which in the case of muscular static force developed in relation to an unstable working object reaches approximately 24%. The aim of this article is twofold: (a) to determine the useful efficiency of the hand-working object system with an unstable handle in relation to the released muscular force and power dynamics and (b) to identify the relative contribution of the upper extremity muscles engaged in the realization of motor or stabilizing functions in the electromyography (EMG) sphere.     

Assessment of the effect of welding fumes on welders’ cognitive failure and health-related quality of life

Introduction. This study examined whether cognitive symptoms and health-related quality of life can be affected by welding fume exposure. Method. Participants consisted of welders (n?=?40) and welder assistants (n?=?25) from welding units as the exposed group, and office workers (n?=?44) as the non-exposed group. All participants were studied using ambient air monitoring and two types of questionnaires: the Cognitive Failures Questionnaire (CFQ) and the 36-item Short Form Health Survey (SF-36). Results. Welders and welder assistants were exposed to higher concentrations of all airborne metals than office employees, except for aluminum and chromium (p?p?M (SD)?=?54.84 (17.88)). The relationships between total CFQ score and the measured concentration of nickel at peak work rate was significant for welders. Conclusion. Cognitive symptoms and health-related quality of life were not related to the measures of welding fume exposure and further research should be performed to find other influencing factors.     

Exposure-based assessment of the effectiveness of Michigan’s graduated driver licensing nighttime driving restriction

The objective of the study is to assess the effectiveness of Michigan’s graduated driver licensing (GDL) program in terms of nighttime driving restriction. The research uses the quasi-induced exposure technique to capture and represent the exposure and accident risk change of the impacted driver groups due to the implementation of the GDL program. Six years of Michigan accident data were used, including three years before the GDL implementation and three years after. The effectiveness of Michigan’s GDL program in terms of nighttime driving is reflected in several dimensions: for the impacted drivers (16- and 17-year-olds), there is a significant reduction of exposure compared to the reference group and a decrease in the relative accident involvement ratio (thus a reduced accident risk); and examination of time of day distributions of impacted teenage drivers shows that there is a conspicuous percentage drop of impacted teenage drivers at the point where the nighttime curfew starts. With the implementation of the GDL program, the affected group tends to drive increasingly more in the several hours prior to the restricted time period to avoid violating the curfew law. As opposed to the traditional exposure measurements such as population or licensed drivers, quasi-induced exposure technique has the capability of depicting the accident propensity and quantifying exposure change from different age groups.     

Algorithms for Increasing the Efficiency of Precision Production Operator’s Activities

To assess and plan future risk-analysis research projects, 275 documents describing methods and tools for assessing the risks associated with industrial machines or with other sectors such as the military, and the nuclear and aeronautics industries, etc., were collected. These documents were in the format of published books or papers, standards, technical guides and company procedures collected throughout industry. From the collected documents, 112 documents were selected for analysis; 108 methods applied or potentially applicable for assessing the risks associated with industrial machines were analyzed and classified. This paper presents the main quantitative results of the analysis of the methods and tools.     

What’s in a name? Drivers’ perceptions of the use of five SAE Level 2 driving automation systems

Introduction: Automobile manufacturers are developing increasingly sophisticated driving automation systems. Currently, the highest level of automation available on the market is SAE Level 2, which provides sustained assistance for both lateral and longitudinal vehicle control. The purpose of this study was to evaluate how drivers’ perceptions of what behaviors secondary to driving are safe while a Level 2 system is operating vary by system name. Methods: A nationally representative telephone survey of 2005 drivers was conducted in 2018 with questions about behaviors respondents perceived as safe while a Level 2 driving automation system is in operation. Each respondent was asked about two out of five system names at random for a balanced study design. Results: The name “Autopilot” was associated with the highest likelihood that drivers believed a behavior was safe while in operation, for every behavior measured. There was less variation observed among the other four SAE Level 2 system names when compared with each other. A limited proportion of drivers had experience with advanced driver assistance systems and fewer of these reported driving a vehicle in which Level 2 systems were available. Drivers reported that they would consult a variety of sources for information on how to use a Level 2 system. Conclusions: The names of SAE Level 2 driving automation systems influence drivers’ perceptions of how to use them, and the name “Autopilot” was associated with the strongest effect. While a name alone cannot properly instruct drivers on how to use a system, it is a piece of information and must be considered so that drivers are not misled about the correct usage of these systems. Practical Applications: Manufacturers, suppliers, and organizations regulating or evaluating SAE Level 2 automated driving systems should ensure that systems are named so as not to mislead drivers about their safe use.     

Ergonomic Diagnosis of the Driver’s Workplace in an Electric Locomotive

This paper deals with research aimed at developing a method for ergonomic analysis of the driver’s workplace in an electric locomotive. It presents the structure of the diagnosis and its assumptions, and includes a re-evaluation of the questionnaire-expert method in ergonomic research. The article presents research data on weights and evaluations including their standard deviations for particular priority features. Ergonomic levels of the studied operator’s cabin in locomotives are compared.     

Structural equation model of the influence of noise annoyance on miners’ unsafe behavior in coal mines

Miners' unsafe behavior (UB) is the main cause of coal mine accidents. Previous research has suggested that excessive noise in tunnels impacts miners' temperaments and safe production behavior. To explore the influence of noise on UB, four different dimensions of noise annoyance were identified: cognitive, emotional, communication, and physical mechanism annoyance. The coal mine noise annoyance scale, miners' unsafe behavior intention (UBI) scale, and miners’ UB scale were developed according to different dimensions. In the first survey, a total of 200 questionnaires were distributed in the two coal mines, and 193 valid questionnaires were recovered. Exploratory factor analysis was conducted, and invalid items were removed according to the analysis results to form the final scale. Then, 500 final scales were distributed in two Chinese coal mines, and 482 valid questionnaires were collected. Confirmatory factor analysis was conducted by collating the data of the second questionnaire. Based upon the structural equation model (SEM), the SEM of the influence of noise annoyance degree on UB and the path analysis with latent variable path analysis with the latent variables (PA-LVs) mediating model of the effect of UBI on UB were established, and the path coefficients with fitting data of the model were analyzed. The results indicated that the four dimensions of coal mine noise annoyance had a strong positive impact on UB, which was reduced by less noise annoyance. In addition, the Bootstrap method was used to verify the mediating method among the four dimensions of noise annoyance, cognitive annoyance, emotional annoyance, with communication annoyance indirectly affecting UB through UBI. The research results provide theoretical support for reducing the UB of miners and improving coal mine safety levels.     

An Empirical Investigation of the Influence of Safety Climate on Organizational Citizenship Behavior in Taiwan’s Facilities

Although the social exchange relationships between employers and employees are increasingly important to the performance of safety management systems, the psychological effects of work attitudes on this relationship have been less studied. Using a sample of first-line operators and their supervisors from 188 facilities in Taiwan which had Occupational Health and Safety Assessment Series 18000 (OHSAS 18000) certification, the current research conducted an empirical investigation of the influence of safety climate on organizational citizenship behavior (OCB). Work attitude was used to disclose the psychological effect. Research results indicated that (a) safety climate was a significant predicator of OCB, (b) the psychological effect significantly influenced social exchange relationships, and (c) job satisfaction showed a stronger mediating influence than organizational commitment due to the frequent top management turnover. Discussions and implications are also addressed.     

An investigation of the relationship between organizational climate and professional drivers’ driver behaviours

The aim of this study was to investigate the relationship between organizational climate and driver behaviours of professional drivers. The sample consisted of 230 male professional drivers. The participants completed a questionnaire including the Driver Behaviour Questionnaire (DBQ), Hofstede’s Organizational Culture Scale, and a background information form. Results of the factor analysis of Hofstede’s Organizational Culture Scale yielded two dimensions, which were named as “work orientation” and “employee consideration”. Analyses of Covariance (ANCOVA) revealed significant main and interaction effects of organizational climate on errors, and violations after controlling for the statistical effects of age, annual mileage and the organization types. Drivers with low scores of work orientation reported significantly higher frequencies of errors and violations than drivers with high scores of work orientation. It was also found that drivers with low scores of employee consideration reported higher frequencies of errors and violations than drivers with high scores of employee consideration. The effect of interaction between work orientation and employee consideration dimensions was only found on the frequencies of violations.     

Investigation and identification of factors affecting migrating peasant workers’ usage of safety footwear in the Chinese construction industry

A sample of 300 migrating peasant workers from 15 Chinese building construction sites completed a demographic questionnaire to investigate the usage of safety footwear. The survey form was constructed based on the theory of planned behaviour, and a total of 12 questions focusing on the workers’ past experience, attitudes, subjective norms and perceived behavioural control were included in the survey. It was found that 92% of the participants did not wear safety footwear while working on construction sites, although more than 91% of them believed that safety footwear would protect the foot from injury; none of the participants had been provided free safety footwear by their employer. Regression analysis shows that employers’ attitude is the most important factor affecting their usage of safety footwear, ‘providing free safety footwear’ and ‘comfortability of the safety footwear’ ranking second and third respectively.     

Assessing the performance of motorcyclists’ impact protectors in simulated ATD knee and shoulder impacts

Objective: Fractures are a common injury among motorcycle riders and can have serious health implications. Impact protection (IP) has been designed to help prevent fractures, yet there are conflicting opinions as to whether this IP does in fact help prevent fractures in real-world crashes. This work aimed to (1) use simulated dummy impacts to examine whether existing types of IP could reduce the force transferred to the underlying bone to below fracture tolerance levels and (2) investigate whether current European Standard (EN 1621-1) test procedures for impact protectors designed for motorcyclists are sufficient to ensure fracture protection.

Method: Twenty-three shoulder and 7 knee IP specimens were tested using a 23-kg impactor contacting axially along the clavicle and femur of an anthropomorphic test device (ATD) at an energy level corresponding to the fracture tolerance of these bones. Sixteen IP specimens were the same as those worn by motorcycle riders involved in crashes where injury outcome was known (knee: n?=?3; shoulder: n?=?13) and the IP had been previously tested to EN 1621-1. Other IP tested represented a wide range of IP available for purchase at a motorcycle accessory store. Double and triple layers of IP were also tested. Energy attenuated during the dummy impacts was compared to energy attenuated when tested to EN 1621-1.

Results: Of the 23 shoulder IP tested, the average percentage reduction of transferred force to the shoulder from the baseline test was 7.6?±?4.8%. The percentage reduction of transferred force to the knee from the baseline was 43.9?±?7.5%. The entire group of knee IP tested reduced the transferred force to the knee to below the 10-kN injury threshold for the femur. There was a positive but nonsignificant correlation between the ATD test and the EN 1621-1 impact test performance, suggesting that the European standard test method likely provides a good indication of IP performance. However, given the low correlation coefficient, the relationship between IP performance in the European standard test method and injury protection remains unclear.

Conclusion: Though the energy attenuation test method in the European standard may be an appropriate approach, distinct differences in injury protection performance observed between knee and shoulder IP indicate that there may be a need for different performance criteria for IP designated to protect different body regions.     

Metallurgical analysis of the ‘cause’ arc beads pattern characteristics under different short-circuit currents

Electric arc beads commonly cause large fire and explosion accidents, especially during the powder process industries. During such fires, the original equipment is often severely burned, rendering electrical fire investigation impossible. Therefore, identifying the beads caused by electrical faults through metallurgical investigation is crucial. This study focused on the ‘cause’ of arc beads and determined their pattern characteristics through metallurgical analysis of copper wires with short-circuit currents of 100, 160, 200, and 240 A. According to microstructure characteristics and metallographic knowledge, bead pattern characteristics were divided into six types: hypereutectic (A), dendritic eutectic (B), chilled layer (C), cellular crystal (D), dendritic (E), and coarse columnar crystal (F). Oxide levels of each category were A (4.5%–7.6%) > C (2.0%–3.8%) > B (1.1%–2.4%) > D (1.0%–2.1%) > E (0.6%–1.9%) > F (0.1%–0.7%). When the short-circuit currents were the same, there were a greater number of small particle beads than large ones. As the current increased, the number of distributed beads with a particle size d < 1 mm decreased, with 1 mm ≤ d < 2 mm increased, and with d ≥ 2 mm were stable. Bead size and distribution had a negative linear correlation at 200 A. When the current increased, the proportion of beads with A and C structures gradually decreased, and those with D structures increased to more than 50%. Oxygen content and arc temperature determined the oxide form. These results are vital for electrical fire investigations and provide theoretical support for fire material evidence extraction and cause identification.     

Pilot see,pilot do: Examining the predictors of pilots’ risk management behaviour

Decision-making under uncertainty, known as risk management, is common in many professions including medicine and the military. Within general aviation, it is a skill that pilots are largely expected to acquire through experience. This study sought to determine if there are known markers (i.e., attitude and risk perception) and or personal characteristics (i.e., flight experience and age) that predict the acquisition and utilization of this skill. Fifty-six participants were presented with a risky flight which involved searching for a wayward parachutist with minimal fuel on board their aircraft. A clear distinction in terms of ‘risk perception’ was evident between those pilots who elected to undertake the risky flight (36 participants) and those pilots who did not (20 participants). There was also evidence of attitudinal and demographic differences between the two groups. The results have implications for the selection and training of pilots.     

Evaluation of pliers’ grip spans in the maximum gripping task and sub-maximum cutting task

A total of 25 males participated to investigate the effects of the grip spans of pliers on the total grip force, individual finger forces and muscle activities in the maximum gripping task and wire-cutting tasks. In the maximum gripping task, results showed that the 50-mm grip span had significantly higher total grip strength than the other grip spans. In the cutting task, the 50-mm grip span also showed significantly higher grip strength than the 65-mm and 80-mm grip spans, whereas the muscle activities showed a higher value at 80-mm grip span. The ratios of cutting force to maximum grip strength were also investigated. Ratios of 30.3%, 31.3% and 41.3% were obtained by grip spans of 50-mm, 65-mm, and 80-mm, respectively. Thus, the 50-mm grip span for pliers might be recommended to provide maximum exertion in gripping tasks, as well as lower maximum-cutting force ratios in the cutting tasks.     

Operators’ signal-detection performance in video display unit monitoring tasks of the main control room

This study evaluated the operators’ signal-detection performance in video display unit (VDU) monitoring tasks of the main control room (MCR). So far the study of the relationship between VDU design strategy and human errors has been superficial. To validate the effect of VDUs design strategies on operating errors in the MCR, this present research adopted a within subject experimental design to develop different experimental treatments based on two types of display modes included consistent mode and mixed mode. A total of 13 undergraduate and graduate students were recruited as participants in the experiment. Dependent variables included situation awareness, reaction time, error frequency, and subjective performance. Some research support was found for the representation principles. The conclusions of this study could not only be implemented by the human-system interface (HSI) designers of a MCR in the advanced nuclear power plant (NPP) but also could be generalized to the extent that other digital workstation similar to the MCR.     

Children's and Adults’ Comfort Experience of Extra Seat Belts When Riding in the Rear Seat of a Passenger Car

Objective: The objective of this study was to explore passengers’ comfort experience of extra seat belts during on-road driving in the rear seat of a passenger car and to investigate how the use of extra belts affects children's and adults’ attitudes to the product.

Methods: Two different seat belt systems were tested, criss-cross (CC) and backpack (BP), consisting of the standard 3-point belt together with an additional 2-point belt. In total, 32 participants (15 children aged 6–10, 6 youths aged 11–15, and 11 adults aged 20–79, who differed considerably in size, shape, and proportions) traveled for one hour with each system, including city traffic and highway driving. Four video cameras monitored the test subject during the drive. Subjective data regarding emotions and perceived discomfort were collected in questionnaires every 20 min. A semistructured interview was held afterwards.

Results: All participant groups accepted the new products and especially the increased feeling of safety (P <.01); 56% preferred CC and 44% preferred BP but the difference was not significant. In total, 81% wanted to have extra seat belts in their family car. CC was appreciated for its symmetry, comfort, and the perceived feeling of safety. Some participants found CC unpleasant because the belts tended to slip close to the neck, described as a strangling feeling. BP was simpler to use and did not cause annoyance to the neck in the way CC did. Instead, it felt asymmetric and to some extent less safe than CC. Body size and shape affected seat belt fit to a great extent, which in turn affected the experience of comfort, both initially and over time. Perceived safety benefit and experienced comfort were the most determinant factors for the attitude toward the extra seat belts. The extra seat belts were perceived as being better than the participants had expected before the test, and they became more used to them over time.

Conclusion: This exploratory study provided valuable knowledge from a user perspective for further development of new seat belt systems in cars. In addition to an increased feeling of safety, seat belt fit and comfort are supplementary influencing factors when it comes to gaining acceptance of new seat belt systems.     

Workers’ exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations

The objective of the study was to investigate occupational exposure to electric fields during the task ‘maintenance of an operating device of circuit breaker from a service platform’ at 110-kV substations. The aim was also to compare the results to Directive 2013/35/EU. At 16 substations, 255 electric field measurements were performed. The highest mean value of the electric fields was 9.6?kV?m^?1. At 63% of substations the maximum values were over 10.0?kV?m^?1, and at 31% of the substations the 75th percentiles were over 10.0?kV?m^?1, which is the low action level (AL) according to Directive 2013/35/EU. All measured values were below the high AL (20.0?kV?m^?1). In the future, it is important to take into account that the measurements were only taken at Finnish 110-kV substations; therefore, it is not possible to generalize these results to other countries and different types of substations.