Degradation of volatile chlorinated aliphatic priority pollutants in groundwater

The known degradation products and degradative pathways involving selected volatile aliphatic chlorinated hydrocarbons in soil-groundwater systems are summarized. Current data indicate that the most commonly found products of microbial degradation of these compounds come from reductive dehalogenation, while nonmicrobial degradations tend to involve hydrolysis and/or oxidation. However, conclusions must be regarded as tentative, since most of the available studies have involved model systems and extrapolations, rather than direct studies of compounds in groundwater systems. Other potentially complicating factors, such as mobility and volatilization, are mentioned. Current knowledge is discussed in the context of data that would be desirable to obtain in future studies.     

Number of persistent organic pollutants detected at high concentrations in a general population

BackgroundSurveys of human exposure to environmental chemicals do not integrate the number of compounds detected per person and the concentration of each compound. This leaves untested relevant exposure scenarios, such as whether individuals with low concentrations of some compounds have high concentrations of the other compounds.ObjectiveTo analyze the number of persistent organic pollutants (POPs) detected at high concentrations.MethodsSerum concentrations of 19 POPs were analyzed by gas chromatography with electron-capture detection in a representative sample of the general population of Catalonia, Spain (N = 919).ResultsOver 58% of participants had concentrations in the top quartile of ≥ 1 of the eight most prevalent POPs, and 34% of ≥ 3 POPs. 83% of women 60 to 74 years old had concentrations of ≥ 3 POPs in the top quartile; 56% of women 60 to 74 years had p,p′-DDE, HCB and β-HCH all in their respective top quartiles, and 48% had concentrations of ≥ 6 POPs in the top quartile. Over 30% of subjects had concentrations in the top decile of 1 to 5 of the eight most prevalent POPs. Half of the population had levels of 1 to 5 POPs > 500 ng/g. Less than 4% had all eight POPs in the lowest quartile.ConclusionsMore than half of the study population had concentrations in the top quartile of ≥ 1 POPs. Significant subgroups of the population accumulate POP mixtures at high concentrations. POP concentrations appear low in most of the population only when each individual compound is looked at separately.     

Recovery agenda for sustainable development post COVID-19 at the country level: developing a fuzzy action priority surface

Environment, Development and Sustainability - As a response to the urgent call for recovery actions against the COVID-19 crisis, this research aims to identify action priority areas...     

Net primary production of Ural forests: Methods and results of automated estimating

Methodical approaches to forest biomass and net primary production estimating are studied and their regression models are designed. By means of combining these models and State Forest Account database of 305 forest enterprises of the Ural region the total forest biomass (9.11 billion tons) and net primary production (542 million tons) are calculated. The models and calculating algorithms are involved into the information system on the base of the Software AG platform Natural, which allows to estimate and to re-calculate forest biomass and net primary production on some territory in automatic mode.     

Human appropriation of net primary production (HANPP) in Nova Scotia,Canada

Photosynthetically fixed energy from the sun, in the form of net primary production, ultimately supports the majority of life on earth. Given the importance of this energy source, we calculate the human appropriation of net primary production (HANPP) for the province of Nova Scotia, Canada. We find that over 25% of potentially available production is appropriated by humans through harvest (forestry and agriculture) and land cover change. The level of appropriation in Nova Scotia is close to the global average, when methodological differences between studies are taken into account, but substantially less than in Austria and India where detailed surveys have also been conducted. Furthermore, HANPP is not distributed evenly throughout the province, but is instead concentrated in the north-central counties, where appropriation reaches 50%. We discuss the implications of these results, and the novel method used to obtain them, in the context of biophysical assessment and the species-energy hypothesis.     

Design of a point-of-care facility for diagnosis of COVID-19 using an off-grid photovoltaic system

Environment, Development and Sustainability - Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) pandemic is one of the biggest public health issues in the last years. The WHO has...     

Evaluation of the usefulness of bird feathers as a non-destructive biomonitoring tool for organic pollutants: a comparative and meta-analytical approach

In this study, we investigated whether bird feathers can be used as a non-destructive biomonitor for organic pollutants. We analysed the outermost tail feathers of 8 terrestrial and aquatic bird species from Belgium (8 species, n=108) for polychlorinated biphenyls (PCBs), polybrominated diphenyl ethers (PBDEs) and organochlorine pesticides (OCPs). Every compound class could be quantified in one single tail feather of the birds under study (sum PCBs ranging from 5.5 to 510 ng/g feather, sum PBDEs from 0.33 to 53 ng/g feather, sum DDTs from 1.5 to 730 ng/g feather), except for PBDEs in feathers of the common moorhen (Gallinula chloropus). Further, we calculated Pearson correlations between concentrations of organic pollutants in feathers and concentrations in corresponding muscle or liver tissue from the birds. Correlations were found significant in half of the cases of the terrestrial species, but were found not significant for the aquatic species, with the exception of a significant correlation of sum PCBs in the common moorhen. Only for the common buzzard (Buteo buteo) (n=43) all correlations were found significant (0.32相似文献   

Analysis of availability and accessibility of hydrogen production: An approach to a sustainable energy system using methane hydrate resources

It is considered that use of hydrogen as an energy source may contribute to environmental improvement and provide an alternative energy system. Moreover, it is anticipated that hydrogen will be in great demand in the near future for use in such vehicles as fuel cell-based cars. Research and development of a number of advanced methods of hydrogen production (OTEC, water photolysis using a semiconductor, a municipal waste gasification—smelting system, etc.) is currently under way. A comparison of different hydrogen-rich fuels in this paper shows that methane is advantageous for hydrogen production from the viewpoint of energy efficiency as measured by thermodynamic analysis. This paper therefore proposes combining existing technology for hydrogen production with an unconventional methane source in order to facilitate the realization of a hydrogen energy system: i.e., this paper proposes combining the process of steam reforming, which is commercialized worldwide, with use of untouched natural gas hydrate (NGH) resources. Gas hydrate deposits, which are distributed worldwide, hold great amounts of methane gas and have hardly been touched. This paper presents the economic parameters of NGH development and discusses the concept of devising useful applications of NGHs, with consideration given to (1) independence from current fossil fuels; (2) energy transport using the hydrate system; (3) CO₂ sequestration — replacement of methane hydrate with CO₂ hydrate in the submarine layer and (4) improvement of current steam reforming of methane by CO₂ reuse and zeolite application. This paper thus proposes a new solution that will make a key contribution to the systematic development of a new sustainable energy structure.     

Analysis of availability and accessibility of hydrogen production: An approach to a sustainable energy system using methane hydrate resources

It is considered that use of hydrogen as an energy source may contribute to environmental improvement and provide an alternative energy system. Moreover, it is anticipated that hydrogen will be in great demand in the near future for use in such vehicles as fuel cell-based cars. Research and development of a number of advanced methods of hydrogen production (OTEC, water photolysis using a semiconductor, a municipal waste gasification—smelting system, etc.) is currently under way.A comparison of different hydrogen-rich fuels in this paper shows that methane is advantageous for hydrogen production from the viewpoint of energy efficiency as measured by thermodynamic analysis. This paper therefore proposes combining existing technology for hydrogen production with an unconventional methane source in order to facilitate the realization of a hydrogen energy system: i.e., this paper proposes combining the process of steam reforming, which is commercialized worldwide, with use of untouched natural gas hydrate (NGH) resources. Gas hydrate deposits, which are distributed worldwide, hold great amounts of methane gas and have hardly been touched. This paper presents the economic parameters of NGH development and discusses the concept of devising useful applications of NGHs, with consideration given to (1) independence from current fossil fuels; (2) energy transport using the hydrate system; (3) CO₂ sequestration — replacement of methane hydrate with CO₂ hydrate in the submarine layer and (4) improvement of current steam reforming of methane by CO₂ reuse and zeolite application. This paper thus proposes a new solution that will make a key contribution to the systematic development of a new sustainable energy structure.Readers should send their comments on this paper to: BhaskarNath@aol.com within 3 months of publication of this issue.     

Hierarchical priority setting for restoration in a watershed in NE Spain, based on assessments of soil erosion and ecosystem services

Maintaining and enhancing ecosystem services through the restoration of degraded ecosystems have become an important biodiversity conservation strategy. Deciding where to restore ecosystems for the attainment of multiple services is a key issue for future planning, management, and human well-being. Most restoration projects usually entail a small number of actions in a local area and do not consider the potential benefits of planning restoration at broad regional scales. We developed a hierarchical priority setting approach to evaluate the performance of restoration measures in a semiarid basin in NE Spain (the Martín River Basin, 2,112 km²). Our analysis utilized a combination of erosion (a key driver of degradation in this Mediterranean region) and six spatially explicit ecosystem services data layers (five of these maps plotted surrogates for soil retention and accumulation, water supply and regulation, and carbon storage, and one plotted a cultural service, ecotourism). Hierarchical maps were generated using a geographic information system that combined areas important for providing a bundle of ecosystem services, as state variables, with erosion maps, as the disturbance or regulatory variable. This was performed for multiple scales, thereby identifying the most adequate scale of analysis and establishing a spatial hierarchy of restoration actions based on the combination of the evaluation of erosion rates and the provision of ecosystem services. Our approach provides managers with a straightforward method for determining the spatial distribution of values for a set of ecosystem services in relation to ecological degradation thresholds and for allocating efforts and resources for restoration projects in complex landscapes.     

Environmental and economic benefit of recycling model of packaging waste:a case study on aluminum

In order to achieve sustainable utilization of natural resources, save energy and protect environment and ecosystem, it is important for a region or a nation to develop and implement a viable waste recycling model from both theoretical and practical point of view. Some packaging recycling models operated in developed countries are introduced in this article. Aluminium can recovery and recycling is emphasized. Cost effective, economic and environmental benefit of different models are compared and analyzed. The result shows that all recycling models have their characteristics due to the initial purpose of recovery and the situation of the implementing country. However, all the models contribute to the reduction of municipal solid waste disposal and resources conservation.     

The potential impact of environmental variation on the concentrations and ecological effects of pollutants in a marine avian top predator

Concentrations of organochlorine contaminants (OCs) and associations between OCs and fitness components were examined in great black-backed gulls (Larus marinus) in three colonies along the coast of northern Norway. In one of the colonies, data were collected in two subsequent seasons. Concentrations of four OCs (HCB, oxychlordane, DDE and PCB) were measured in blood (n=260) and fitness components (reproductive variables and adult return rate between breeding seasons) were recorded. In the first year, in two of the colonies, body condition and reproductive performance among the gulls were poor compared to the third colony, suggesting spatial variation in environmental conditions, especially food availability. However, in the third colony, body condition and reproductive performance were even better in the second season; i.e. environmental conditions varied temporally. OC residues were higher in the colonies where environmental conditions were poor, but much of this variation was explained by differences in body condition among colonies. Moreover, concurrent with improved body condition from one season to the next, the concentrations of OCs were halved. In the two colonies where environmental conditions were poor, female OC residues were negatively related to egg-laying date, egg size and nesting success, and in the colony where the concentrations of OC were highest, gulls with elevated DDE residues had low probability of returning between breeding seasons. In comparison, in the colony where environmental conditions were better in the first year, other types of adverse relationships between OCs and fitness components were found; i.e. chicks from females with high OC concentrations were in poor condition at hatching, suggesting maternal transfer of OCs to the eggs, and males with high OC residues had poor nesting success and chick survival, suggesting OC-mediated behavioural changes. With improved environmental conditions and lower OC concentrations in the second season, no significant adverse relationships between OCs and fitness components were found. This study thus suggests that there are complex interrelationships between both concentrations and ecological effects of OCs, and the environment, indicating that effects of OCs in nature may only be assessed after considering environmental variation.     

Environmental and economic benefit of recycling model of packaging waste: a case study on aluminum

Abstract

In order to achieve sustainable utilization of natural resources, save energy and protect environment and ecosystem, it is important for a region or a nation to develop and implement a viable waste recycling model from both theoretical and practical point of view. Some packaging recycling models operated in developed countries are introduced in this article. Aluminium can recovery and recycling is emphasized. Cost effective, economic and environmental benefit of different models are compared and analyzed. The result shows that all recycling models have their characteristics due to the initial purpose of recovery and the situation of the implementing country. However, all the models contribute to the reduction of municipal solid waste disposal and resources conservation.     

PCDD/F levels in the neighbourhood of a municipal solid waste incinerator after introduction of technical improvements in the facility

In 1998 and 1999, the concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were determined in soil and herbage samples collected in the vicinity of an old municipal solid waste incinerator (MSWI) (S. Adrià del Besòs, Barcelona, Spain). Just after the 1999 collection, an adaptation to the EU legislation on pollutant emissions from the stack was carried out in this facility. The purpose of the present study was to determine the current concentrations of PCDD/Fs in soil and herbage samples collected in the neighbourhood of the MSWI and to compare these concentrations with those obtained in the 1998 and 1999 surveys. During the period 1998-1999, an increase of 31% (P>.05) was found in the median PCDD/F levels in soils, while a reduction of 40% (P>.05) was observed in the period 1999-2000. Similarly, in the period 1998-1999 an increase of 41% (P>.05) was found in the levels of PCDD/Fs in vegetation, while a 30% decrease (P<.05) was seen in the period 1999-2000. Although after introduction of the technical improvements in the MSWI a notable reduction in the levels of PCDD/Fs in soil and vegetation has been noted, the median decreases have not been as great as it could be expected according to the very pronounced reductions in PCDD/F emissions from the stack. It indicates that other emission sources of PCDD/Fs also have a notable impact on the area under direct influence of the MSWI.     

Removal of radionuclides at a waterworks

A waterworks with an average production rate of 1.3 m3 s(-1), providing several large cities in the province of Scania with drinking water has been studied regarding its capacity to remove several natural and anthropogenic radionuclides. The raw water is surface water from lake Bolmen which is transported through an 80 km long tunnel in the bedrock before it enters the waterworks. The method used for purification is a combination of coagulation-flocculation and filtration in sand filters. Two different purification lines are currently in use, one using Al2(SO4)3 as a coagulant and one using FeCl3. After coagulation and flocculation the precipitate is removed and the water is passed through two different sand filters (rapid filtration and slow filtration). Water samples were collected at the lake, the inlet to the waterworks, after each of the flocculation basins (Al2(SO4)3 and FeCl3), after rapid filtration and from the municipal distribution network. The samples were analysed with respect to their content of uranium, thorium, polonium, radium, plutonium and caesium. The results show a high removal capacity for uranium (about 85%), thorium (>90%), plutonium (>95%) and polonium (>90% in the coagulation-flocculation process) while caesium, strontium and radium pass through the purification process with almost unchanged activity concentrations. During transportation of the water in the tunnel it was also observed that infiltration of groundwater leads to a change in isotopic ratios and/or activity concentrations for the naturally occurring radionuclides and plutonium.     

Cleaner production: a case study of Kaveh paper mill

The pulp and paper industry is under increasing pressure to reduce its energy consumption and impact on the environment. The ‘Cleaner Production’ (CP) approach has been widely utilised as a tool to meet environmental concerns by industry. However, because of the high initial capital cost of CP implementation, it is important to develop a model for prioritisation. In this paper, using analytic hierarchy process methodology, a tree-level hierarchy model was structured to facilitate the prioritisation process in the Kaveh Papermaking Company located in Iran. Using a literature review and field study, the proposed model can provide a framework for CP implementation in a paper factory. The results show that process change gives higher priority between 5 criteria and that repair of all leaks in the paper-making process gives higher priority between 35 sub-criteria. Process change was further evaluated and discussed in which input material changes gained higher priority. The results of this research can be used to accelerate the implementation of CP in Iran's pulp and paper industry.