Environmental radioactivity and thermoluminescence: A review

A close link exists between environmental radioactivity and thermoluminescence (TL) and this connection can be gainfully employed in (i) environmental radiation surveillance, (ii) radioactive prospecting and (iii) dating. The science of thermoluminescence dosimetry (TLD) is very well established for use in routine radiation monitoring. With the increased public awareness of health effects due to radioactivity releases from nuclear operations. TLDs have become indispensible ‘watchdogs’ in environmental surveillance; in high natural background areas such as the monazite regions, TLDs have yielded invaluable dosimetric data. Over large areas where the cosmic background can be assumed constant, the TLD-recorded radiation profiles can reflected the terrestrial gamma radioactivity distribution pattern and even seasonal variations in the radiation levels above ground may be delineated. A variety of natural materials like minerals, rocks, soils, sands, sediments, fossils, etc., as well as ancient artefacts like potteries and ceramic wares, yield TL even without any irradiation in the laboratory: the natural radioactivity in these materials, together with the radiation incident on them from the environment, causes a TL build-up during antiquity. It is possible to measure this natural TL and relate it to the natural radioactivity of the sample and hence to its age. In contrast, observations of a kind of anticorrelation between TL and a sample's radioactivity have also been made in recent times and the effect is mostly ascribable to alpha-radioactivity-induced damage effects.Typical results from recent investigations of the various aspects mentioned above are presented in this review, with particular emphasis on applications in India.     

Secondary arsenic minerals in the environment: A review

Information on arsenic (As) speciation in solid materials is critical for many environmental studies concerned with As stability and/or mobility in natural As-impacted soils and mining or industrial sites contaminated by As. The investigation of these systems has provided evidence for a number of secondary As minerals that have often played a significant role in As mobility in the solid phase–water system. This paper presents a list of environmentally important secondary As minerals in contaminated soil and waste systems, summarizes the information about their origin, occurrence, environmental stability and thermodynamics, and proposes several important avenues for further investigation.     

Vanadium,recent advancements and research prospects: A review

Metal pollution is an important issue worldwide, with various documented cases of metal toxicity in mining areas, industries, coal power plants and agriculture sector. Heavy metal polluted soils pose severe problems to plants, water resources, environment and nutrition. Among all non-essential metals, vanadium (V) is becoming a serious matter of discussion for the scientists who deals with heavy metals. Due to its mobility from soil to plants, it causes adverse effects to human beings. This review article illustrates briefly about V, its role and shows the progress about V research so far done globally in the light of the previous work which may assist in inter-disciplinary studies to evaluate the ecological importance of V toxicity.     

Radionuclide transfer to fruits: A critical review. Foreword

After completion of the (Validation of Environmental Model Predictions) (VAMP) and (BIOspheric Model Validation Study) (BIOMOVS II) Programmes, the Division of Radiation and Waste Safety of the IAEA decided to promote a new co-ordinated research programme to continue activities in the area of biosphere modelling. As a result, the BIOMASS Programme on BIOsphere Modelling and ASSessment was launched in Vienna in October 1996. The Programme is scheduled to finish in October 2000. The overall objective of BIOMASS is to provide an international focal point in the area of biosphere assessment modelling. There are 3 Themes and 11 working groups in BIOMASS. The objective of the Theme 3 Fruits Working Group is to improve understanding of the uptake and transfer of radionuclides from different sources to fruit. As part of the work programme, a review was undertaken of the experimental, field and modelling information on the transfer of radionuclides to fruit.     

GM crops and the rat digestive tract: A critical review

The aim of this review is to examine the relationship between genetically modified (GM) crops and health, based on histopathological investigations of the digestive tract in rats. We reviewed published long-term feeding studies of crops containing one or more of three specific traits: herbicide tolerance via the EPSPS gene and insect resistance via cry1Ab or cry3Bb1 genes. These genes are commonly found in commercialised GM crops. Our search found 21 studies for nine (19%) out of the 47 crops approved for human and/or animal consumption. We could find no studies on the other 38 (81%) approved crops. Fourteen out of the 21 studies (67%) were general health assessments of the GM crop on rat health. Most of these studies (76%) were performed after the crop had been approved for human and/or animal consumption, with half of these being published at least nine years after approval. Our review also discovered an inconsistency in methodology and a lack of defined criteria for outcomes that would be considered toxicologically or pathologically significant. In addition, there was a lack of transparency in the methods and results, which made comparisons between the studies difficult. The evidence reviewed here demonstrates an incomplete picture regarding the toxicity (and safety) of GM products consumed by humans and animals. Therefore, each GM product should be assessed on merit, with appropriate studies performed to indicate the level of safety associated with them. Detailed guidelines should be developed which will allow for the generation of comparable and reproducible studies. This will establish a foundation for evidence-based guidelines, to better determine if GM food is safe for human and animal consumption.     

Measurement of semivolatile carbonaceous aerosols and its implications: A review

Measurement of carbonaceous aerosols is complicated by positive and negative artifacts. An organic denuder with high efficiency for removing gaseous organics is an effective approach to eliminate the positive artifact, and it is a precondition for the accurate determination of SVOC by an adsorbent backup filter. Evaluations of different configurations of the organic denuder, and SVOC determined by different denuder-based samplers, both integrated and semi-continuous, are reviewed. A new equation for determination of the denuder efficiency is estimated, considering the efficiency of removing both the gaseous organics that could be adsorbed by the quartz and the gaseous passing through the quartz that could be subsequently adsorbed by the backup adsorbent filter. The origin of OC on the backup quartz filter, behind either quartz or Teflon filter, is quantitatively evaluated by the denuder-based method based on the data published. The backup-OC is shown to be dominated by either gaseous organics passing through the front filter or the evaporated particulate organic carbon depending on the sampling environment.     

The chemistry of smog formation: A review of current knowledge

This paper describes smog chemistry and the methods used to develop our knowledge of its complex chemistry. These methods employ computer modeling, fundamental chemistry, smog chamber experiments, sophisticated analytical instrumentation, and process analysis techniques. The photochemistry leading to smog formation involves a kinetically controlled and coupled competitive process. The essential pathway for formation of nitrogen oxides starts with emissions composed primarily of NO, which are converted to NO₂, mostly via reactions with peroxy radicals; NO₂ is converted to photochemically inert nitric acid primarily by reaction with OH. Organics in smog chemistry are eventually oxidized to CO₂ and water; before this, they typically react with OH to form peroxy radicals. The peroxy (RO₂·) radicals couple the organic and nitrogen chemistry by converting NO to NO₂; the RO₂· radicals are converted to RO radicals, which typically lead to oxygenated intermediate organics that continue through OH·---RO₂·---RO· cycles. These OH·---RO₂·---RO· cycles produce CO, CO₂, and radical products. The radical products, which usually derive from photolysis of oxygenated intermediate organic products, are central to the overall process of smog formation. This is because the balance of these radicals affects the rapidity and severity of smog development. The radical balance is, in turn, controlled by the sources and sinks that depend on the HC/NO_x ratio, the types of organics, and the light flux. With only a rudimentary understanding of smog chemistry as a process, many of the effects observed from precursor controls can be explained and the basic shape of Empirical Kinetics Modeling Approach (EKMA) isopleth curves can be accounted for. The next step beyond this basic level of understanding involves a host of subprocesses composed of a complex series of chemical reactions. Current research in smog chemistry centers on the assessment and elucidation of these complex subprocesses. Atmospheric models currently in use rely on condensed chemical mechanisms. All such modern mechanisms treat the same basic processes, but differ both in their method of condensation and in their manner of addressing the complex subprocesses of smog chemistry.     

Industrial ecology: a review

Industrial ecology is both a vision, a research field, and a source of inspiration for practical work. Its proponents aim to contribute to sustainable development by closing materials cycles and realising a fundamental paradigm shift in the thinking concerning industry–ecology relations. Dominant research lines in industrial ecology focus on industrial metabolism and life cycle tools. The underlying assumption is that the flow and transformation of materials can be managed through the correcting of market and regulatory failures which are causes of environmental degradation. This literature review suggests, on the one hand, that the manageability of the flow of materials is currently limited by market and regulatory failures which inhibit the implementation of the principles of industrial ecology and, on the other hand, that the flow and transformation of materials are only partly affected by prices, information and laws. Received: 9 September 1999 · Revised: 22 November 1999 · Accepted: 2 December 1999     

A review of botanical phytochemicals with mosquitocidal potential

Identification of novel effective mosquitocidal compounds is essential to combat increasing resistance rates, concern for the environment and food safety, the unacceptability of many organophosphates and organochlorines and the high cost of synthetic pyrethroids. An increasing number of researchers are reconsidering botanicals containing active phytochemicals in their efforts to address some of these problems. To be highly competitive and effective, the ideal phytochemical should possess a combination of toxic effects and residual capacity. Acute toxicity is required at doses comparable to some commercial synthetic insecticides while chronic or sub-chronic toxicity is required to produce growth inhibition, developmental toxicity and generational effects. In this article, we review the current state of knowledge on larvicidal plant species, extraction processes, growth and reproduction inhibiting phytochemicals, botanical ovicides, synergistic, additive and antagonistic joint action effects of mixtures, residual capacity, effects on non-target organisms, resistance, screening methodologies, and discuss promising advances made in phytochemical research.     

Impact of heatwave on mortality under different heatwave definitions: A systematic review and meta-analysis

Heatwave effects on human health and wellbeing is a great public health concern, especially in the context of climate change. However, no universally consistent heatwave definition is available. A systematic review and meta-analysis was conducted to assess the heatwave definitions used in the literature published up to 1st April 2015 by searching five databases (PubMed, ProQuest, ScienceDirect, Scopus, and Web of Science). Random-effects models were used to pool the effects of heatwave on total and cardiorespiratory mortality by different heatwave definitions. Existing evidence suggests a significant impact of heatwave on mortality, but the magnitude of the effect estimates varies under different heatwave definitions. Heatwave-related mortality risks increased by 4% (using “mean temperatures ≥ 95th percentile for ≥ 2 days” as a heatwave definition), 3% (mean temperatures ≥ 98th percentile for ≥ 2 days), 7% (mean temperatures ≥ 99th percentile for ≥ 2 days) and 16% (mean temperatures ≥ 97th percentile for ≥ 5 days). Heatwave intensity plays a relatively more important role than duration in determining heatwave-related deaths. Heatwaves significantly increase mortality across the globe, but the effect estimates vary with the definition of heatwaves. City- or region-specific heat health early warning systems based on identified local heatwave definitions may be optimal for protecting and preventing people from the adverse impacts of future heatwaves.     

Living near nuclear power plants and thyroid cancer risk: A systematic review and meta-analysis

There has been public concern regarding the safety of residing near nuclear power plants, and the extent of risk for thyroid cancer among adults living near nuclear power plants has not been fully explored. In the present study, a systematic review and meta-analysis of epidemiologic studies was conducted to investigate the association between living near nuclear power plants and the risk of thyroid cancer. A comprehensive literature search was performed on studies published up to March 2015 on the association between nuclear power plants and thyroid cancer risk. The summary standardized incidence ratio (SIR), standardized mortality ratio (SMR), and 95% confidence intervals (CIs) were calculated using a random-effect model of meta-analysis. Sensitivity analyses were performed by study quality. Thirteen studies were included in the meta-analysis, covering 36 nuclear power stations in 10 countries. Overall, summary estimates showed no significant increased thyroid cancer incidence or mortality among residents living near nuclear power plants (summary SIR = 0.98; 95% CI 0.87–1.11, summary SMR = 0.80; 95% CI 0.62–1.04). The pooled estimates did not reveal different patterns of risk by gender, exposure definition, or reference population. However, sensitivity analysis by exposure definition showed that living less than 20 km from nuclear power plants was associated with a significant increase in the risk of thyroid cancer in well-designed studies (summary OR = 1.75; 95% CI 1.17–2.64). Our study does not support an association between living near nuclear power plants and risk of thyroid cancer but does support a need for well-designed future studies.     

Particle size measurements of automotive diesel emissions

The automative diesel engine has long been acknowledged as being “dirtier” than the spark ignition engine and its particulate emissions may be carcinogenic. Possible solutions to the diesel emission problem are combustion modification or aftertreatment devices. Selection of candidate aftertreatment devices requires knowledge of the physical and chemical properties of the particles, including particle morphology, size distribution, mass concentration and emission rates in the exhaust gas stream. The study reported here represents the first of a series of experiments designed to characterize the exhaust emissions and test various aftertreatment devices. This paper deals only with the particulate characterization phase of the program. Results of size distribution, particle concentration and mass emission rate measurements for a 5.71 displacement Oldsmobile diesel engine are given for a variety of engine operating conditions.     

Polybrominated diphenyl ether flame retardants in the U.S. marine environment: A review

Polybrominated diphenyl ethers (PBDEs) are used as flame retardants in polymeric materials such as furnishing foam, rigid plastics and textiles. The U.S. has historically led the world production of these man-made chemicals and was responsible for about 50% of the total global demand in 2001. Paradoxically, scientific studies addressing sources, behavior and fate of PBDEs in the U.S. environment are limited when compared to those in Europe. This paper reviews the distribution of PBDEs in marine and estuarine matrices of the three U.S. coasts (Atlantic, Pacific and Gulf of Mexico) and Alaska. PBDEs are ubiquitous in all compartments including water, sediment and biota. Contamination is higher in urbanized regions such as the coast of California. In numerous cases, concentrations of PBDEs in U.S. marine matrices are among the highest in the world. Higher PBDE levels in the U.S. marine environment reflect that over 90% of the Penta-BDE global production has been utilized in the United States. BDEs 47, 99 and 100 typically dominate the composition of PBDEs in most samples and exhibit high concentrations in several matrices. BDEs 17, 28, 33, 49, 153, 154 and 155 are also of concern since they are known to be present in a minor proportion in the Penta-BDE products. BDEs 206, 207, 208 and 209 which occur in Deca-BDE products do not appear to accumulate in most marine organisms although they may be debrominated into more toxic congeners. There is still no regulation addressing PBDEs contamination in the U.S. aquatic environments. Thus, efforts to understand the cycling of PBDEs in the environment as well as toxic effects in organisms are needed to support the development of quality criteria. Some PBDE congeners fulfill the criteria to be recognized as persistent organic pollutants (POPs). The addition of PBDEs to the list of POPs established by the United Nations Stockholm Convention will be important in elevating environmental concerns regarding these chemicals to an appropriate level of awareness.     

A review of a community-based approach to combating land degradation: dryland salinity management in Australia

Degradation of farmland caused by salinisation is a major environmental issue in Australia. To combat salinisation a community-based approach has been adopted. This paper reviews the nature and effectiveness of this approach, describing its rationale, strengths and weaknesses. The community-based approach is shown to have been highly successful in raising awareness and providing education about the problem of dryland salinity in Australia, and has encouraged group participation in managing the problem. The approach has allowed some internalisation of the externalities associated with dryland salinity, with peer group and community pressure helping to address some salinity problems. However, the approach has not greatly lessened the threat of salinisation. Community and regional groups continue to receive the bulk of salinity management funding yet it is funding for development of new innovations, technologies and policies that is also critical to combating salinity. A conclusion is that there may have been an over-investment in the community-based approach and under-investment in the development of skills and research infrastructure required to develop innovative solutions to lessen the cost of salinity. Readers should send their comments on this paper to BhaskarNath@aol.com within 3 months of publication of this issue.     

Guidance on assessing the methodological and reporting quality of toxicologically relevant studies: A scoping review

Assessments of methodological and reporting quality are critical to adequately judging the credibility of a study's conclusions and to gauging its potential reproducibility. To aid those seeking to assess the methodological or reporting quality of studies relevant to toxicology, we conducted a scoping review of the available guidance with respect to four types of studies: in vivo and in vitro, (quantitative) structure-activity relationships ([Q]SARs), physico-chemical, and human observational studies. Our aims were to identify the available guidance in this diverse literature, briefly summarize each document, and distill the common elements of these documents for each study type. In general, we found considerable guidance for in vivo and human studies, but only one paper addressed in vitro studies exclusively. The guidance for (Q)SAR studies and physico-chemical studies was scant but authoritative. There was substantial overlap across guidance documents in the proposed criteria for both methodological and reporting quality. Some guidance documents address toxicology research directly, whereas others address preclinical research generally or clinical research and therefore may not be fully applicable to the toxicology context without some translation. Another challenge is the degree to which assessments of methodological quality in toxicology should focus on risk of bias – as in clinical medicine and healthcare – or be broadened to include other quality measures, such as confirming the identity of test substances prior to exposure. Our review is intended primarily for those in toxicology and risk assessment seeking an entry point into the extensive and diverse literature on methodological and reporting quality applicable to their work.     

Pharmaceuticals and personal care products (PPCPs): A review on environmental contamination in China

Pharmaceuticals and personal care products (PPCPs) which contain diverse organic groups, such as antibiotics, hormones, antimicrobial agents, synthetic musks, etc., have raised significant concerns in recently years for their persistent input and potential threat to ecological environment and human health. China is a large country with high production and consumption of PPCPs for its economic development and population growth in recent years. This may result in PPCP contamination in different environmental media of China. This review summarizes the current contamination status of different environment media, including sewage, surface water, sludge, sediments, soil, and wild animals, in China by PPCPs. The human body burden and adverse effects derived from PPCPs are also evaluated. Based on this review, it has been concluded that more contamination information of aquatic environment and wildlife as well as human body burden of PPCPs in different areas of China is urgent. Studies about their environmental behavior and control technologies need to be conducted, and acute and chronic toxicities of different PPCP groups should be investigated for assessing their potential ecological and health risks.     

Pesticides exposure in Pakistan: a review

This is the first systematic review of studies done since 1960, and to give an integrated picture of pesticides exposure to humans, animals, plants, waters, soils/sediments, atmosphere etc. in Pakistan. Authors have extracted data from different departments, published literature in research journals and National reports. Although the wide-spread usage of pesticides in Pakistan has controlled the pests, but like other countries, it has started causing environmental problems in the area. In some areas of Punjab and Sindh groundwater has been found contaminated and is constantly being under the process of contamination due to pesticide use. There is considerable evidence that farmers have overused and misused pesticides especially in cotton-growing areas. It is evident from the biological monitoring studies that farmers are at higher risk for acute and chronic health effects associated with pesticides due to occupational exposure. Furthermore, the intensive use of pesticides (higher sprays more than the recommended dose) in cotton areas involves a special risk for the field workers, pickers, and of an unacceptable residue concentration in cottonseed oil and cakes. The authors have also discussed the merits and demerits of different studies. The review will set the future course of action of different studies on pesticide exposure in Pakistan. Data limitations are still the major obstacle towards establishing clear environmental trends in Pakistan. The authors suggest that a reliable monitoring, assessment and reporting procedures shall be implemented in accordance with appropriate environmental policies, laws and regulations in order to minimize the pesticides exposure.     

A review on transient stability of DFIG integrated power system

With the increasing penetration of doubly fed induction generators (DFIGs), the impact of the DFIG on transient stability attracts great attention. Transient stability is largely dominated by generator types in the power system, and the dynamic characteristics of DFIG wind turbines are different from that of the synchronous generators in the conventional power plants. The analysis of the transient stability on DFIG integrated power systems has become a very important issue. This paper reviews the current research on the issue from two aspects. One is to describe the methods to improve the fault ride through capability of DFIG wind turbines and the other is to analyse the impact of the DFIG wind farm on transient stability of power systems.     

Pathways of Mycobacterium ulcerans infection: a review

Buruli ulcer (BU), an often-deforming skin ulceration caused by Mycobacterium ulcerans (MU), is now considered by the World Health Organization to be the third most common mycobacterium infection. However, the reservoir of MU in the environment and the epidemiology of BU are poorly understood. The disease is prevalent in riverine, slow-flowing and swampy areas of several tropical and subtropical regions of the world, especially in West Africa where the disease is rapidly increasing in incidence. This paper presents a review of published literature concerning epidemiology of, transmission and susceptibility to MU infection. It considers several endemic natural environments and their influence on infection.     

Pesticide burial grounds in Poland: a review

Obsolete pesticides were stored in Poland from the middle sixties until the late eighties of the 20th century mostly in underground disposal sites, called "pesticide burial grounds" or "pesticide tombs". The total amount of pesticide waste and packaging materials disposed of in these landfills exceeded 20000 Mg. Typically, the content of a pesticide tomb was dominated by organochlorine pesticides (comprising 10-100% of the total waste volume) with DDT as the prevailing compound. Other pesticide types, such as phosphoroorganic, carbamate insecticides, dinitrophenols, phenoxyacids, and inorganic compounds were stored in smaller quantities, usually not exceeding 10-20% of the total waste volume. With the growing awareness of the threats that these landfills posed to the environment, the first inventory for the whole country was made in 1993 and remediation was initiated in 1999. The total amount of waste, which had to be removed from the known pesticide tombs (hazardous substances, contaminated soils, construction materials etc.) was about 100000 Mg. According to the National Waste Management Plan, the reclamation of pesticide tombs was assumed to have been finished by the end of 2010, however, this goal has not been achieved. The aim of this review is to present a historical perspective of pesticide burial grounds in Poland with an emphasis on their creation, function, inventory, and remediation. Based on unpublished reports, and other published materials of limited availability written in Polish, this review may serve as a source of information for representatives of other countries, where remediation of pesticide burial grounds is still in progress. The experience gained over a ten-year period, when restoration of pesticide tombs was implemented in Poland, reveals that there are many obstacles to this action arising not only from technical, but also from economic and social issues.