Using ecological knowledge for development planning

Since October 1977, the East-West Environment and Policy Institute in Honolulu has been conducting a multinational collaborative project to enhance the preparation and utilization of natural systems assessments in developing countries. This paper presents some of the findings to date: 1. Channels are developing rapidly for transferring ecological knowledge into political and administrative decision making. 2. The systematic approach of ecology is replacing environmental quality as the organizing concept for information about natural resources and the environment. 3. Benefit-cost analysis is a promising method for integrating ecological knowledge into economic development decision making. 4. The lack of baseline information, inventories, and predictive capability will not be remedied soon or easily; thus priorities for ecological research are essential.This paper is adapted from a presentation at the Fifth Symposium on Tropical Ecology of the International Society for Tropical Ecology, University of Malaya, Kuala Lumpur, Malaysia, on 19 April 1979. Environmental Management, Vol. 4, No. 1, pp. 13–20     

The indicator performance estimate approach to determining acceptable wilderness conditions

Using data from a study conducted in the Cranberry Wilderness Area of West Virginia, United States, this paper describes how a modified importance—performance approach can be used to prioritize wilderness indicators and determine how much change from the pristine is acceptable. The approach uses two key types of information: (1) indicator importance, or visitor opinion as to which wilderness indicators have the greatest influence on their experience, and (2) management performance, or the extent to which actual indicator conditions exceed or are within visitor expectations. Performance was represented by calculating indicator performance estimates (IPEs), as defined by standardized differences between actual conditions and visitor preferences for each indicator. The results for each indicator are then presented graphically on a four-quadrant matrix for objective interpretation. Each quadrant represents a management response: keep up the good work, concentrate here, low priority, or possible overkill. The technique allows managers to more systematically and effectively utilize information routinely collected during the limits of acceptable change wilderness planning process. This paper is submitted with the approval of the Director of the West Virginia Agricultural and Forestry Experiment Station as Scientific Article No. 541. The study was funded in part, through a grant from the USDA Forest Service, Monongahela National Forest.     

Application of the wilderness travel simulation model to the Appalachian Trail in Vermont

The wilderness travel simulation model estimates complex recreation use patterns in park and wilderness environments. The model was applied to a section of the Appalachian Trail in Vermont, a linear, long-distance, multiple-access trail system characteristic of the eastern United States. Many portions of the trail, including the study area, are now experiencing high use. The model estimated the average number of trail encounters per party day to be 3.3 and the average number of camp encounters per party night to be 2.3. Other measures of recreation use were also estimated that should prove useful to trail management and administration. Three trail management scenarios were tested, providing several preliminary insights to managers: the desirability of use redistributions as opposed to across-the-board reductions and needed emphasis on spatial use patterns and campsite encounters. Only minor modifications to the program were needed in applying the model to the trail environment and the model functioned accurately according to the validity tests performed.     

Vegetation and soil recovery in wilderness campsites closed to visitor use

Recreational use of wilderness results in impacts to vegetation and soil in trails and campsites. Traditionally, campsite impact studies have compared campsites receiving various levels of use with unused control areas. Field studies in Sequoia National Park, California, indicate that the degree of impact to vegetation and soils also varies within campsites. The central areas of campsites, where trampling is concentrated, show lower plant species diversity, differences in relative species cover, more highly compacted soils, and lower soil nutrient concentrations than do peripheral, moderately trampled, and untrampled areas within the same campsite. Three years after closure to visitor use, the central areas show less increase in mean foliar plant cover, and soils remain more highly compacted than in previously moderately trampled areas of the same sites. Changes in relative species cover over time are used to assess both resiliency to trampling and species composition recovery within campsites closed to visitor use.     

The wilderness use simulation model applied to Colorado River boating in Grand Canyon National Park,USA

A modification of the Shechter-Lucas Wilderness Use Simulation Model (WUSM) for peak season boating on the Colorado River through Grand Canyon National Park, USA, is evaluated as a tool for making management decisions. A new microcomputer program to select trip itineraries for inclusion in the WUSM that was developed as part of this study is presented. This program simplifies user input and expands the WUSM's usefulness as a tool for management decisions by randomizing itinerary schedules based on probabilities developed from actual use of sites by canyon visitors. Model usefulness is demonstrated by simulating various management changes and comparing use levels of attraction sites and campgrounds as well as numbers of encounters between parties. The WUSM is being used as part of an ongoing study, to reflect the impact of fluctuating flow regimes through the turbines at Glen Canyon Dam on river trips.     

Landscape ecological assessment: a tool for integrating biodiversity issues in strategic environmental assessment and planning

To achieve a sustainable development, impacts on biodiversity of urbanisation, new infrastructure projects and other land use changes must be considered on landscape and regional scales. This requires that important decisions are made after a systematic evaluation of environmental impacts. Landscape ecology can provide a conceptual framework for the assessment of consequences of long-term development processes like urbanisation on biodiversity components, and for evaluating and visualising the impacts of alternative planning scenarios. The aim of this paper was to develop methods for integrating biodiversity issues in planning and strategic environmental assessment in an urbanising environment, on landscape and regional levels. In order to test developed methods, a case study was conducted in the region of Stockholm, the capital of Sweden, and the study area embraced the city centre, suburbs and peri-urban areas. Focal species were tested as indicators of habitat quality, quantity and connectivity in the landscape. Predictive modelling of habitat distribution in geographic information systems involved the modelling of focal species occurrences based on empirical data, incorporated in a landscape ecological decision support system. When habitat models were retrieved, they were applied on future planning scenarios in order to predict and assess the impacts on focal species. The scenario involving a diffuse exploitation pattern had the greatest negative impacts on the habitat networks of focal species. The scenarios with concentrated exploitation also had negative impacts, although they were possible to mitigate quite easily. The predictions of the impacts on habitats networks of focal species made it possible to quantify, integrate and visualise the effects of urbanisation scenarios on aspects of biodiversity on a landscape level.     

GIS in planning

This paper outlines some of the potential uses of GIS in planning authorities, and identifies some of the pitfalls to be avoided. It begins with some practical considerations in the area of data sources and system configurations, goes on to envision ways in which GIS might benefit the work of a planning department, and finally considers some of the management issues which surround the introduction and use of GIS in planning.     

Prioritizing Abandoned Coal Mine Reclamation Projects Within the Contiguous United States Using Geographic Information System Extrapolation

Coal mine reclamation projects are very expensive and require coordination of local and federal agencies to identify resources for the most economic way of reclaiming mined land. Location of resources for mine reclamation is a spatial problem. This article presents a methodology that allows the combination of spatial data on resources for the coal mine reclamation and uses GIS analysis to develop a priority list of potential mine reclamation sites within contiguous United States using the method of extrapolation. The extrapolation method in this study was based on the Bark Camp reclamation project. The mine reclamation project at Bark Camp, Pennsylvania, USA, provided an example of the beneficial use of fly ash and dredged material to reclaim 402,600 sq mi of a mine abandoned in the 1980s. Railroads provided transportation of dredged material and fly ash to the site. Therefore, four spatial elements contributed to the reclamation project at Bark Camp: dredged material, abandoned mines, fly ash sources, and railroads. Using spatial distribution of these data in the contiguous United States, it was possible to utilize GIS analysis to prioritize areas where reclamation projects similar to Bark Camp are feasible. GIS analysis identified unique occurrences of all four spatial elements used in the Bark Camp case for each 1 km of the United States territory within 20, 40, 60, 80, and 100 km radii from abandoned mines. The results showed the number of abandoned mines for each state and identified their locations. The federal or state governments can use these results in mine reclamation planning.     

Applying Gap Analysis and a Comparison Index to Evaluate Protected Areas in Thailand

Protected areas in Thailand were first established 40 years ago. The total area of existing protected areas covers 18.2% of the country’s land area and the Class 1 Watershed, another form of protection, encompasses 18.1%. The government of Thailand intends to increase protected area systems to 25% of the country in 2006 and 30% in 2016. There are always questions arising about how much is enough protected areas to effectively protect biodiversity. The objective of this article is to assess the representation of ecosystems in the protected area network. This article also recommends which underrepresented ecosystems should be added to fill the gaps in representativeness. The research applies a gap analysis and a comparison index to assess the representation of ecosystems within the protected area network. The spatial analyses were applied to measure three aspects of representativeness, namely forest type, altitude, and natural land system. The analyses indicate that the existing protected area system covers 24.4% of the country’s land area, nearly meeting the 25% target proposed by the National Forest Policy; and 83.8% of these areas are under forest cover. Most protected areas are situated in high altitudes, where biological diversity is less than in lowlands. Mangrove forest and riparian floodplain are extremely underrepresented in the existing system. Peat swamp forest, dry dipterocarp forest, and beach forest are relatively well represented. In addition, these five ecosystems are threatened by human pressures and natural disasters; therefore, they should be targeted as high priorities for the selection of new reserves. Future research should incorporate aquatic and marine ecosystems, as well as animal distributions, which were not included in this research due to data unavailabilities.     

Using Participatory Rural Appraisal to explore coastal fishing in Badagry villages,Nigeria

Fish production and marketing are as old as the rural communities involved in the lucrative occupation in Badagry area of Lagos State, Nigeria. A random sampling of 200 fishermen using Participatory Rural Appraisal techniques (PRA) in five Badagry villages was used to explore coastal fishing and socio-economic development in the study area with a view to enhancing local productivity and sustainability. The findings show that an average fisherman in Badagry is aware of the resources available in his environment, and can affect productivity levels positively if given adequate incentives. There are two lessons from this study; one has to do with what PRA tells us about the fishing community, the other is the importance of facilitators that have, amongst other things, good listening skills. The experience also revealed that field workers’ ability to listen and learn from local fishermen was a critical factor in collecting in-depth information that could be used for rural community planning.     

Using GIS to Identify Functionally Significant Wetlands in the Northeastern United States

/ Of the several automated wetland assessment methods currently available, none are comprehensive in considering all of the primary functions a wetland can perform. We developed a methodology particularly suited to the Northeastern United States that enumerates spatial predictors of wetland function for three primary wetland functions: flood flow alteration, surface water quality improvement, andwildlife habitat. Predictors were derived from several wetland assessment techniques and directly from the literature on wetland structure and function. The methodology was then automated using a Geographic Information System (GIS). The resulting Automated Assessment Method for Northeastern Wetlands (AMNEW) consists of a suite of eight Arc Macro Language (AML) programs that run in the ARC/INFO GRID module. Using remotely sensed land use information and digital elevation models (DEMs), AMNEW produces three separate grids of wetlands that perform each function. The method was tested on four watersheds in Vermont's Lake Champlain Basin. Results and preliminary verification indicate that the method can successfully identify those wetlands in the Northeastern region that have the potential to be functionally important.     

Conflict on the Coast: Using Geographic Information Systems to Map Potential Environmental Disputes in Matagorda Bay,Texas

The sustainable management of coastal natural resources inevitably involves identifying stakeholder conflicts and developing planning processes that prevent these conflicts from becoming intractable disputes. This study links environmental conflict to specific areas within a large ecological system. Specifically, we use Geographic Information Systems (GIS) to map potentially competing stakeholder values associated with establishing protected areas in Matagorda Bay, Texas. By overlaying multiple values associated with a range of stakeholders across space, we are able to identify hotspots of potential conflict as well as areas of opportunity for maximizing joint gains. Mapping stakeholder conflict is an approach to proactively locate potential controversy in response to a specific environmental management proposal and guide decision makers in crafting planning processes that mitigate the possibility of intractable disputes and facilitate the implementation of sustainable coastal policies. Results indicate that under different management scenarios, protected area proposals will generate more conflict in specific areas. Most notably, regulated uses would produce the greatest degree of conflict on or near shore, particularly at the mouth of the Colorado River. Additionally, of all the management scenarios evaluated, the prohibition of coastal structural development would generate the overall highest level of conflict within the Bay. Based on the results, we discuss the policy implications for environmental managers and provide guidance for future research on location-based conflict management within the coastal margin.     

Using LCA to evaluate impacts and resources conservation potential of composting: A case study of the Asti District in Italy

Separate collection of municipal solid waste has overcome the 50% threshold in the Asti District in northern Italy, nearly one-third being composed of household and green organic waste. In order to address present and future solutions, it becomes therefore fundamental to assess the environmental performances of the current management of organic waste from separate collection. A from-gate-to-cradle life cycle assessment (LCA) model has been developed by expanding system boundaries, in order to carry out the assessment in the context of the whole waste management streamline. The environmental performances of an existing aerobic plant were made available, based on field measured data, by paying attention to the role and contribution of waste management subsystems. The need for actual and reliable data on materials and energy input, as well as gross and net gains from materials recovery, including benefits arising from use of compost in farming activities, was probably the major drawback that had to be faced. The study integrated the findings of different investigations from the literature with field measured data in order to obtain a more comprehensive framework representative of the area under study. The results may help public administrators to better understand the suitability of using LCA tools when dealing with solid waste management strategies.     

A hierarchical approach to fisheries planning and modeling in the Columbia River Basin

The Columbia River Basin is the scene of a massive effort to restore populations of Pacific salmon (Oncorhynchus spp.) and steelhead (O. mykiss). Efficient restoration is confounded by a high level of complexity, competing sociopolitical goals and values, and uncertainty about key system properties. Simulation models and other tools of systems analysis are important to development of a comprehensive, regionally acceptable strategy. Hierarchy theory provides a useful paradigm for organized complexity within the Columbia Basin and the basis for a trilevel hierarchical structure for organizing and integrating models. Life-stage models compose the most basic simulation units at the lowest level in the proposed hierarchical modeling structure. Each life-stage model simulates a distinct period in the life cycle of anadromous salmonids. Population models at the intermediate level simulate the complete life cycles of salmon and steelhead populations. At the highest level in the hierarchy, interpopulation models simulate extensive, long-term processes that affect multiple species and stocks. A hierarchical system of models is preferable to a single model or to a group of models lacking formal structure. A principal advantage is that models have the correct spatial and temporal resolution for analyzing questions at different scales. A hierarchical structure also facilitates the flow of information among models, and aids in understanding the impacts of uncertainty. Constructing a hierarchy of models should involve both bottom-up and top-down perspectives that maintain logical consistency among models, while allowing unique model structures appropriate for each level in the hierarchy.     

Application of spatial multi-criteria analysis to site selection for a local park: a case study in the Bergamo Province, Italy

This contribution discusses a site selection process for establishing a local park. It was supported by a value-focused approach and spatial multi-criteria evaluation techniques. A first set of spatial criteria was used to design a number of potential sites. Next, a new set of spatial and non-spatial criteria was employed, including the social functions and the financial costs, together with the degree of suitability for the park to evaluate the potential sites and to recommend the most acceptable one. The whole process was facilitated by a new software tool that supports spatial multiple criteria evaluation, or SMCE. The application of this tool, combined with a continual feedback by the public administration, has provided an effective methodology to solve complex decisional problem in land-use and urban planning.     

Using Earth Observation to update a Natura 2000 habitat map for a wetland in Greece

The European Habitats Directive 92/43/EEC has defined the need for the conservation of habitats and species with the adoption of appropriate measures. Within the Natura 2000 ecological network of special areas of conservation, natural habitats will be monitored to ensure the maintenance or restoration of their composition, structure and extent. The European Space Agency's GlobWetland project has provided remotely sensed products for several Ramsar wetlands worldwide, such as detailed land cover-land use, water cycle and inundated vegetation maps. This paper presents the development and testing of an operational methodology for updating a wetland's habitat map using the GlobWetland products, and the evaluation of the extent to which GlobWetland products have contributed to the habitat map updating. The developed methodology incorporated both automated and analyst-supervised techniques to photo-interpret, delineate, refine, and evaluate the updated habitat polygons. The developed methodology was proven successful in its application to the wetland complex of the Axios-Loudias-Aliakmon delta (Greece). The resulting habitat map met the European and Greek national requirements. Results revealed that GlobWetland products were a valuable contribution, but source data (enhanced satellite images) were necessary to discriminate spectrally similar habitats. Finally, the developed methodology can be modified for original habitat mapping.     

利用生命周期评价方法分析上海市某区生活垃圾处理的温室气体排放

通过生命周期评价（LCA）的方法,对上海市某区生活垃圾处理现状及4个不同可选处理方案的温室气体（GHG）排放量进行了分析。结果表明,当前该区生活垃圾处理系统的GHG排放总量为776.42 t CO2eq.,其中填埋、焚烧和堆肥分别占33%、39%和20%,其他处理单元仅占8%。通过4个可选方案的对比表明,采取垃圾分类收...     

Using SWAT to Model Streamflow in Two River Basins With Ground and Satellite Precipitation Data1

Abstract: Both ground rain gauge and remotely sensed precipitation (Next Generation Weather Radar – NEXRAD Stage III) data have been used to support spatially distributed hydrological modeling. This study is unique in that it utilizes and compares the performance of National Weather Service (NWS) rain gauge, NEXRAD Stage III, and Tropical Rainfall Measurement Mission (TRMM) 3B42 (Version 6) data for the hydrological modeling of the Middle Nueces River Watershed in South Texas and Middle Rio Grande Watershed in South Texas and northern Mexico. The hydrologic model chosen for this study is the Soil and Water Assessment Tool (SWAT), which is a comprehensive, physical‐based tool that models watershed hydrology and water quality within stream reaches. Minor adjustments to selected model parameters were applied to make parameter values more realistic based on results from previous studies. In both watersheds, NEXRAD Stage III data yields results with low mass balance error between simulated and actual streamflow (±13%) and high monthly Nash‐Sutcliffe efficiency coefficients (NS > 0.60) for both calibration (July 1, 2003 to December 31, 2006) and validation (2007) periods. In the Middle Rio Grande Watershed NEXRAD Stage III data also yield robust daily results (time averaged over a three‐day period) with NS values of (0.60‐0.88). TRMM 3B42 data generate simulations for the Middle Rio Grande Watershed of variable qualtiy (MBE = +13 to ?16%; NS = 0.38‐0.94; RMSE = 0.07‐0.65), but greatly overestimates streamflow during the calibration period in the Middle Nueces Watershed. During the calibration period use of NWS rain gauge data does not generate acceptable simulations in both watersheds. Significantly, our study is the first to successfully demonstrate the utility of satellite‐estimated precipitation (TRMM 3B42) in supporting hydrologic modeling with SWAT; thereby, potentially extending the realm (between 50°N and 50°S) where remotely sensed precipitation data can support hydrologic modeling outside of regions that have modern, ground‐based radar networks (i.e., much of the third world).