Seasonal bioavailability of sediment-associated heavy metals along the Mississippi river floodplain.

A value of simultaneously extracted metal to acid-volatile sulfide (SEM-AVS) can provide important information regarding metal availability in anaerobic sediment. SEM and AVS concentrations were obtained by the cold-acid purge-and-trap technique during spring and summer at six locations along the Mississippi River floodplain. SEM-AVS values and AVS concentrations did not vary significantly between locations during both seasons. AVS concentrations were significantly greater during summer than spring, resulting in significantly lower SEM-AVS values in summer. Total SEM concentrations did not significantly vary between seasons or specific locations. SEM-AVS values were greater than one at each location during both seasons. Sediment metal toxicity was predicted to be absent for benthic organisms along the river floodplain.     

Oxidation of acid-volatile sulfide in surface sediments increases the release and toxicity of copper to the benthic amphipod Melita plumulosa

Acid-volatile sulfides (AVS) are an important metal-binding phase in sediments. For sediments that contain an excess of AVS over simultaneously extracted metal (SEM) concentrations, acute or chronic effects should not result from the metals Cd, Cu, Ni, Pb and Zn. While AVS phases may exist in surface sediments, the exposure to dissolved oxygen may oxidize the AVS and release metals to more bioavailable forms. We investigated the role of oxidation of AVS, and specifically copper sulfide phases, in surface sediments, in the toxicity to juveniles of the epibenthic amphipod, Melita plumulosa. Sediments containing known amounts of copper sulfide were prepared either in situ by reacting dissolved copper with AVS that had formed in field sediments or created in sediments within the laboratory, or by addition of synthesised CuS to sediments. Regardless of the form of the copper sulfide, considerable oxidation of AVS occurred during the 10-d tests. Sediments that had a molar excess of AVS compared to SEM at the start of the tests, did not always have an excess at the end of the tests. Consistent with the AVS-SEM model, no toxicity was observed for sediments with an excess of AVS throughout the tests. However, the study highlights the need to carefully consider the changes in AVS concentrations during tests, and that measurements of AVS and SEM concentrations should carefully target the materials to which the organisms are being exposed throughout tests, which in the case of juvenile M. plumulosa is the top few mm of the sediments.     

Effects of flow regime and flooding on heavy metal availability in sediment and soil of a dynamic river system

The acid volatile sulphide (AVS) and simultaneously extracted metals (SigmaSEM) method is increasingly used for risk assessment of toxic metals. In this study, we assessed spatial and temporal variations of AVS and SigmaSEM in river sediments and floodplain soils, addressing influence of flow regime and flooding. Slow-flowing sites contained high organic matter and clay content, leading to anoxic conditions, and subsequent AVS formation and binding of metals. Seasonality affected these processes through temperature and oxygen concentration, leading to increased levels of AVS in summer at slow-flowing sites (max. 37micromolg(-1)). In contrast, fast-flowing sites hardly contained AVS, so that seasonality had no influence on these sites. Floodplain soils showed an opposite AVS seasonality because of preferential inundation and concomitant AVS formation in winter (max. 3-30micromolg(-1)). We conclude that in dynamic river systems, flow velocity is the key to understanding variability of AVS and SigmaSEM.     

Sampling method, storage and pretreatment of sediment affect AVS concentrations with consequences for bioassay responses

Sediment treatment and sediment storage may alter sediment toxicity, and consequently biotic response. Purpose of our study was to combine these three aspects (treatment-toxicity-biotic response) in one integrated approach. We used Acid Volatile Sulfide (AVS) concentrations as a proxy of the disturbance of the sediment. AVS and Simultaneously Extracted Metal (SEM) concentrations were compared to bioassay responses with the freshwater benthic macroinvertebrate Asellus aquaticus. Storage conditions and sediment treatment affected AVS but not SEM levels. AVS can be used as a proxy for sediment disturbance. The best way to pretreat the sediment for use in a bioassay in order to maintain initial AVS conditions was to sample the sediment with an Ekman grab, immediately store it in a jar without headspace, and freeze it as soon as possible. In a survey using seven different sediments, bioassay responses of A. aquaticus were correlated with SEM and AVS characteristics.     

Influence of Spartina alterniflora on the mobility of heavy metals in salt marsh sediments of the Yangtze River Estuary, China

Using bio-disturbed sulphide to trace the mobility and transformation of Cu, Pb, Ni and Zn in the sediments of the Spartina alterniflora-dominated salt marsh in the Yangtze River Estuary, measurements were made of the seasonal variations of acid-volatile sulphide (AVS) and of the simultaneously extracted metals (SEM) in the rhizosphere sediments. Microcosm incubation experiments recreating flooding conditions were conducted to evaluate the effect of AVS and other metal binding phases upon the dynamics of Cu, Pb, Ni and Zn in the salt marsh sediments. The results demonstrate that the ratio values of SEM/AVS have a significant seasonal variation in the rhizosphere sediments and that the anoxic conditions in the sediments were likely enhanced by S. alterniflora during the summer and autumn compared with the anoxic conditions resulting from the native species Phragmites australis and Scirpus mariqueter. The incubation experiments suggest that Fe(III) and Mn(IV/III) (hydr)oxides provide important binding sites for heavy metals under oxic conditions, and sulphide provides important binding sites for the Cu and Pb under anoxic conditions. Our observations indicate that the mobility of heavy metals in the salt marsh sediments is strongly influenced by biogeochemical redox processes and that the invasive S. alterniflora may increase the seasonal fluctuation in heavy metal bioavailability in the salt marsh ecosystem.     

Vertical distribution of acid-volatile sulfide and simultaneously extracted metals in mangrove sediments from the Jiulong River Estuary,Fujian, China

Background Acid-volatile sulfide (AVS) is operationally defined as sulfides in sediment, which are soluble in cold acid, and is reported as the most active part of the total sulfur in aquatic sediments. It is a key partitioning phase controlling the activities of divalent cationic heavy metals in sediment. Methods In order to examine this in mangrove environments, six sites were selected along the Jiulong River Estuary in Fujian, China, which had previously been reported to be polluted by heavy metals. Sediments were sampled from 0–60 cm depth at each site, and the spatial distribution of AVS and SEM (simultaneously extracted metals: copper, cadmium, zinc, and lead) were determined. Results and Discussion The results indicate that the AVS concentrations had a spatial variation, ranging from 0.24 to 16.10 μmol g⁻¹ sediment dry weight. The AVS concentration in the surface layer is lower than that of the deeper sediment, with peak values in the 15–30 cm horizon. There was no correlation between the AVS value and organic matter content or total dissolved salts, but a significant positive correlation of AVS with surface sediment (0–5 cm) moisture content was found. This indicates that water logged sediments tend to have a high AVS value. The amount of SEM was within the range of 0.33–2.80 μmol g⁻¹ sediment dry weight and decreased with sediment depth. Conclusions There was a marked variation in AVS and SEM among different sites studied. AVS concentrations were generally lower in the surface sediments, while SEM concentrations slightly decreased with the depth. Higher concentrations of SEM found in the upper layers of the sediments confirm the earlier suggestions that this study area may suffer from increasing heavy metal pollution. Recommendations and Perspectives When monitoring environmental impacts by using AVS, the micro and large-scale spatial variation as well as vertical distribution need to be estimated to avoid misleading results. Both AVS and SEM concentrations in different sediment layers should be taken into account in assessing the potential impact of heavy metals on the biotic environment.     

Spatial distribution of acid-volatile sulphide concentration and metal bioavailability in mangrove sediments from the Brisbane River, Australia

Acid-volatile sulphide (AVS) was measured at regular positions along eight transects through a mangrove forest in the Brisbane River, Queensland, Australia. Concentrations ranged from 0.33 to 22.61 micromol S g(-1) sediment dry weight. There was no correlation between AVS concentration and the proportion of clay-sand in the sediment, but sediments with high AVS concentrations tended to contain more water (rs=0.43; p=0.01). AVS concentrations were used to assess the potential bioavailability of the sediment heavy metal burden. The spatial variability of potential bioavailability was high and depended to a great extent on which metals were considered as part of the AVS complexing system. It is suggested seasonal variations would further increase the observed variability in bioavailability. This variation should be taken into account when monitoring and assessing long-term trends in sediment toxicity.     

Metal partitioning in river sediments measured by sequential extraction and biomimetic approaches

We quantified the concentrations and distributions of metals (Cd, Cr, Cu, Ni, Pb, and Zn) in the sediments of Tuen Mun River, Hong Kong. The potential bioavailability of metals was assessed with a biomimetic extraction method using the sipunculan gut juices. The sediments were characterized by relatively high concentrations of trace metals. Field collected sediments were highly anoxic and the ratio of simultaneously extractable metal (sigmaSEM) to acid volatile sulfide (AVS) was much less than one in these sediments. The majority (>67%) of Cd, Pb, and Zn were bound to AVS, thus their concentrations in the sediment porewater were low. In contrast, Ni was little bound to AVS due to its lower ratios of SEM-Ni to total Ni concentrations. For Cu, relatively high concentrations in the sediment porewater was found, and total organic carbon, AVS and other resistant sulfide phase were the controlling factors for sedimentary Cu partitioning. Net metal adsorption from gut juices to anoxic sediments was observed in metal extraction experiments, suggesting that AVS determined the bioaccumulation and potential bioavailability of most metals in these sediments. Extraction of metals from the oxidized sediments by the gut juices was mainly attributed to metal redistribution from AVS to other geochemical phases. The gut juices were the most effective solvent or extractant than the simple electrolyte solution [I (NaNO(3)) = 0.01 M] and the natural overlying water. Cd was more easily extracted from the oxidized sediments than Zn that tended to have a stronger binding affinity with Fe-Mn oxide, clay and organic matter. The application of partial removal techniques in metal extraction experiments further demonstrated the differential controls of various sediment geochemical phases in affecting metal bioavailability, with the order of TOC > Fe-Mn oxides > carbonate.     

Nickel partitioning in formulated and natural freshwater sediments

A natural, field-collected sediment high in organic carbon (OC) and low in acid-volatile sulfide (AVS) was used to evaluate nickel (Ni) complexation to organic matter (OM) over a range of pH under anoxic conditions. It was found that OM strongly influenced Ni partitioning and that Ni complexation to OM was significantly influenced by pH, with complexation increasing with increasing pH (from pH 6 to 8). Using an equilibrium partitioning approach incorporating both [SEM(Ni)]-[AVS] and OC content, lethal and non-lethal toxicity test endpoints were calculated (predicted) and compared to observed toxicity test results using the amphipod, Hyalella azteca, exposed to four Ni-spiked natural sediments varying in OC and AVS content. Generally, lethal and non-lethal toxicity test endpoints were reasonably predictable in low AVS sediments. Due to the apparent lack of equilibrium between dissolved pore-water Ni and the pure Ni sulfide (likely the result of additional dissolved metal binding ligands), and the possible competition of liberated Fe2+ with Ni2+ for binding sites on organic matter, toxicity predictions (based on sediment OC and AVS content) overestimated the combined protective effects of AVS and OC in the sediments containing mid to high (27.87-44.05 micromol/g d.w.) AVS concentrations. Overall, it was found that equilibrium partitioning-based sediment quality guidelines can be improved through the incorporation of nickel complexation to sedimentary OM (in addition to AVS), although further research is required to fully describe nickel-OM interaction.     

Resuspension of contaminated field and formulated reference sediments Part I: Evaluation of metal release under controlled laboratory conditions

In aquatic systems where metal contaminated sediments are present, the potential exists for metals to be released to the water column when sediment resuspension occurs. The release and partitioning behavior of sediment-bound heavy metals is not well understood during resuspension events. In this study, the release of Cd, Cu, Hg, Ni, Pb and Zn from sediments during resuspension was evaluated using reference sediments with known physical and chemical properties. Sediment treatments with varying quantities of acid volatile sulfide (AVS), total organic carbon (TOC), and different grain size distributions were resuspended under controlled conditions to evaluate their respective effects on dissolved metal concentrations. AVS had the greatest effect on limiting release of dissolved metals, followed by grain size and TOC. Predictions of dissolved concentrations of Cd, Ni, Pb and Zn were developed based on the formulated sediment Σ_metal/AVS ratios with Σ_metal being the total sediment metal concentration. Predicted values were compared to measured dissolved metal concentrations in contaminated field sediments resuspended under identical operating conditions. Metal concentrations released from the field sediments were low overall, in most cases lower than predicted values, reflecting the importance of other binding phases. Overall, results indicate that for sulfidic sediments, low levels of the study metals are released to the dissolved phase during short-term resuspension.     

The Role of a Salt Marsh Plant on Trace Metal Bioavailability in Sediments. Estimation By Different Chemical Approaches * (7 pp)

Goal, Scope and Background The presence or absence of vegetation can condition sediment characteristics. The main aim of this work was to investigate the influence of the sea rush Juncus maritimus on metal (Cd, Cr, Cu, Fe, Mn, Ni, Pb and Zn) availability to organisms living on or in estuarine sediments, from Douro River (NW Portugal), by comparing the characteristics and chemical behaviour of rhizosediments (collected within the plant assemblage) and those of sediment (collected around the plant). In order to evaluate whether and how sediment characteristics condition the role of plants on metal availability, sandy and muddy sediments colonised by J. maritimus were studied in parallel. Methods Metal availability was estimated by enzymatic digestion with pepsin (ED), which may provide an estimate of metal availability to organisms living at estuarine sediments. Nevertheless, since no consensus exists yet on the most suitable methodologies to estimate metal bioavailability in sediments, two more conventional approaches, BCR sequential extraction (SE) and AVS/SEM model, were also used, in parallel, and the information these approaches provided was compared with that provided by ED. Total-recoverable metal contents were determined by atomic absorption spectrophotometry after sediment digestion using a high-pressure microwave system. Results and Discussion Plants could concentrate metals around its roots and rhizomes. In addition, they were capable of oxidizing (release of oxygen by the roots) the anaerobic medium surrounding their roots in muddy sediment (reducing AVS). As sulphide oxidation renders metals (Cd, Cu, Ni, Pb and Zn) into more soluble forms, according to the AVS/SEM model, metals from muddy sites would be more available in rhizosediment than in sediment. The SE approach led to a similar conclusion. Nevertheless, the results provided by ED pointed at opposite conclusion, particularly for Cd and Zn, indicating less availability at rhizosediments than in the surrounding sediment. ED results were interpreted as a consequence of an enrichment of the rhizosediment in organic ligands exuded by the roots or liberated by dead plants. The effect of complexation of metals by organic compounds, which ED could not decompose/dissolve, seemed to overcome that caused by sediment oxidation. In general, a comparison of the information about metal availability by ED, SE, AVS/SEM, showed that it did not always match and in few cases it was even contradictory. Conclusion and Outlook Therefore, a thorough evaluation of the metal availability in sediments requires a combination of different chemical approaches, so as to take into consideration differences in ways of organism exposure (interstitial water and/or ingestion of sediment particles). - * The basis of this peer-reviewed paper is a presentation at the 9th FECS Conference on 'Chemistry and Environment', 29 August to 1 September 2004, Bordeaux, France.     

Fractionation and extractability of sulfur, iron and trace elements in sulfidic sediments

This study describes iron and sulfur fractionation, and the related extractability of selected trace elements (As, Cd, Cr, Cu, Ni, Pb and Zn) in estuarine sediments. The sediments were sulfidic, with moderately high concentrations of pore-water sulfide (200-600 micromol l(-1)) and acid-volatile sulfide (AVS; 9.9-129 micromol g(-1)). Pyrite-S concentrations increased with depth, with 63-251 micromol g(-1) at site W1 and 312-669 micromol g(-1) at site W2. The degree of sulfidisation was generally high (>80%), indicating that Fe may be limiting pyrite accumulation. The ratios of AVS to pyrite-S increased with sediment depth, as expected for the pyritisation of solid-phase AVS. Cadmium, Pb and Zn extractability in 1M HCl indicated that these elements are not significantly sequestered during pyritisation, whereas sequestration may be important for As, Cu and possibly Ni. Extractability trends for Cr suggest that diagenesis in sulfidic sediments may enhance Cr reactivity. Overall, replacement of AVS by pyrite during diagenesis may enhance the reactivity of Cd, Cr, Pb and Zn, whereas As, Cu and possibly Ni may be rendered less reactive.     

The relation between Acid Volatile Sulfides (AVS) and metal accumulation in aquatic invertebrates: Implications of feeding behavior and ecology

The present study evaluates the relationship between Acid Volatile Sulfides (AVS) and metal accumulation in invertebrates with different feeding behavior and ecological preferences. Natural sediments, pore water and surface water, together with benthic and epibenthic invertebrates were sampled at 28 Flemish lowland rivers. Different metals as well as metal binding sediment characteristics including AVS were measured and multiple regression was used to study their relationship with accumulated metals in the invertebrates taxa.Bioaccumulation in the benthic taxa was primarily influenced by total metal concentrations in the sediment. Regarding the epibenthic taxa metal accumulation was mostly explained by the more bioavailable metal fractions in both the sediment and the water. AVS concentrations were generally better correlated with metal accumulation in the epibenthic invertebrates, rather than with the benthic taxa. Our results indicated that the relation between AVS and metal accumulation in aquatic invertebrates is highly dependent on feeding behavior and ecology.     

Heavy metal in sediments of Ziya River in northern China: distribution,potential risks,and source apportionment

The concentration partitioning between the sediment particle and the interstitial water phase plays an important role in controlling the toxicity of heavy metals in aquatic systems. The aim of this study was to assess the sediment quality in a polluted area of the Ziya River, Northern China. The contamination potential and bioavailability of six metals were determined from the concentrations of total metals and the bioavailable fractions. The results showed that the concentrations of Cr, Cu, Ni, Zn, and Pb exceeded the probable effect concentration at several sites. The high geoaccumulation indices showed that the sediments were seriously contaminated by Cd. The ratio of acid-volatile sulfide (AVS) to simultaneously extracted metal (SEM) was higher than 1, which indicated that the availability of metals in sediments was low. The risk assessment of interstitial waters confirmed that there was little chance of release of metals associated with acid-volatile sulfide into the water column. Values of the interstitial water criteria toxicity unit indicated that none of the concentrations of the studied metals exceeded the corresponding water quality thresholds of the US Environmental Protection Agency. Positive matrix factorization showed that the major sources of metals were related to anthropogenic activities. Further, if assessments are based on total heavy metal concentrations, the toxicity of heavy metals in sediment may be overestimated.     

基于FPGA的SBR呼吸速率的测量与应用

微生物的呼吸速率（OUR）在SBR（序批式活性污泥法）的反应工段变化特征明显,与污水中有机物浓度的变化规律相符,在曝气足量时不受曝气不均的影响。为了在确保出水水质的前提下节能降耗,提出了通过软测量技术获得OUR,并将其作为SBR法曝气时间的控制参数,同时在FPGA（现场可编程门阵列）上实现了此控制策略。     

Adaptation, validation and application of the chemo-thermal oxidation method to quantify black carbon in soils

The chemo-thermal oxidation method at 375 °C (CTO-375) has been widely used to quantify black carbon (BC) in sediments. In the present study, CTO-375 was tested and adapted for application to soil, accounting for some matrix specific properties like high organic carbon (≤39%) and carbonate (≤37%) content. Average recoveries of standard reference material SRM-2975 ranged from 25 to 86% for nine representative Swiss and Indian samples, which is similar to literature data for sediments. The adapted method was applied to selected samples of the Swiss soil monitoring network (NABO). BC content exhibited different patterns in three soil profiles while contribution of BC to TOC was found maximum below the topsoil at all three sites, however at different depths (60-130 cm). Six different NABO sites exhibited largely constant BC concentrations over the last 25 years, with short-term (6 months) prevailing over long-term (5 years) temporal fluctuations.     

A comprehensive investigation and assessment of mercury in intertidal sediment in continental coast of Shanghai

The aims of this paper were to survey the total Hg levels and distribution character in intertidal sediment in continental coast of Shanghai, and identify the environment factors that might influence the sediment Hg concentrations, and to assess the pollution degree and potential ecological risk of Hg in sediment. Eighty-eight surface sediment samples and 18 sediment cores were collected for Hg contamination analysis. Physicochemical properties including Eh, particle size, content of total organic carbon (TOC), and acid volatile sulfide (AVS) were also measured. Index of geo-accumulation (I _geo) and potential ecological risk index were used respectively to assess the pollution levels and the ecological risk of sediment Hg. The average of total Hg concentrations in surface sediments was 107.4?±?90.9 ng/g with the range from 0 to 465.9 ng/g. Higher Hg concentrations were generally found in surface sediments near sewage outfalls and the mouth of rivers. Total Hg concentrations were significantly correlated with TOC (p?<?0.05) both in surface (r?=?0.24) and core (r?=?0.29) sediments, but not with the other environment factors (Eh, AVS, and particle size). Geo-accumulation index indicated that Hg contamination in intertidal sediments was generally at none to moderate degree, while potential ecological risk index demonstrated that the risk caused by Hg were at moderate to considerable level. Intertidal sediment in continental coast of Shanghai has generally been contaminated by Hg, and it might pose moderate to considerable risk to the local ecosystem. The Hg contamination is related more to the coastal pollution sources and complicated hydrodynamic and sedimentary conditions than the other environment factors studied.     

Relationship among parameters of lake polluted sediments evaluated by multivariate statistical analysis

In the attempt to assess the relationship and interdependency among sediment toxic pollutants, in particular heavy metals, polycyclic aromatic hydrocarbons (PAH), and linear alkyl sulfonates (LAS) and some of the sediment typical components: inorganic carbon (IC), organic material (OM) and acid volatile sulphides (AVS), multivariate techniques of statistical analysis have been applied to a set of chemical data obtained by the analysis of the sediments of the Trasimeno Lake, a central Italy lake characterized by a large surface (128 km(2)) and a low mean depth (about 4.5 m). The results of principal component analysis (PCA) show interrelationships between: OM content and PAH, Pb, and Cu concentrations of the sediments, LAS and AVS, and AVS and IC. The effect of the different sampling periods on sediment composition and contamination level, and the clustering of the sampling sites as a consequence of pollutant load are also shown. The principal component bi-plot of the variables and samples indicates that PAH have the greatest influence on the separation of samples in the different sampling periods.     

热镀锌厂酸洗废水及锌灰中锌回收

分别采用蒸酸法、氨络合法和硫化沉淀法分离回收热镀锌厂酸洗废水及锌灰中锌铁。分别考察了酸洗废水中盐酸的逸出特性和氨浸法回收蒸馏渣中锌的效果;利用酸洗废水的酸度浸取锌灰中的锌并用氨络合法分离酸浸出液中锌铁;利用硫化物不同溶度积选择性沉淀酸浸出液中的锌,考察了Na2S加入量、曝气时间、反应溶液pH和反应时间的影响。研究结果表明硫酸的加入能提高盐酸的蒸发率但效果不明显,氨络合法难于有效分离锌铁,但硫化物沉淀法可较好地分离锌铁,铁回收率可达97．12％,锌沉淀率达到99．99％,所得沉淀物中ZnS纯度为68．51％。     

Diffusion of PAH and PCB from contaminated sediments with and without mineral capping; measurement and modelling

A novel laboratory microcosm test was developed to measure the diffusion of native PAHs and PCBs from sediments in the presence and absence of a capping layer. Diffusive flux of 15 PAHs and 7 PCBs from uncapped sediment from Oslo harbour was 3.8+/-0.9 microg m(-2)d(-1) and 0.010+/-0.003 microg m(-2)d(-1), respectively. The flux from sediments capped with 1cm mineral cap (crushed limestone or crushed gneiss (0-2mm)), observed during the first 410 d, was 3.5-7.3% of the flux from uncapped sediments. By measuring freely dissolved pore water concentrations of 10 PAHs the flux in the microcosm was modelled with steady state and transient diffusion models. The measured flux from uncapped sediment was 27-290% of modelled steady state flux. Good agreement was also found between the measured flux of pyrene from capped sediment and the flux modelled with the transient model when fitting only with the distribution coefficients for pyrene between the cap material and water (Kd_pyr). Fitted Kd_pyr, (210 and 23 l kg(-1) for limestone and gneiss, respectively) was in the same order of magnitude as K(d) calculated from organic carbon content in the cap materials (68 and 14 l kg(-1) respectively). Calculation of the efficiency of a hypothetical cap with 10 cm diffusion path shows that the increased diffusion path length alone can yield a flux reduction >99% through a strong increase in the stagnant diffusive boundary layer from <1 to 100mm.