Migration of radionuclides in porous rock in the presence of colloids: effects of kinetic interactions

This work investigates the colloid-facilitated migration of radionuclides with radioactive decay in porous media. The sorption processes for radionuclides with both the solid matrix and colloids are treated as equilibrium or nonequilibrium. An analytical solution is obtained from a simplified linear equilibrium interaction mechanism. In addition, the adsorption processes for radionuclides with colloids and porous rock can be assumed as nonequilibrium and modeled by the linear kinetic adsorption. The numerical method is employed to solve the coupled colloid and radionuclide transport equations under nonequilibrium sorption assumption. Moreover, the reaction rates of the adsorption processes for radionuclides with the solid matrix and colloids affect the transport characteristics of radionuclides. The fast reaction rate of radionuclides with colloids causes a higher concentration of radionuclides adsorbed on colloids in a dispersed phase and enlarges acceleration caused by colloids. However, the fast reaction rate for radionuclides with solid matrix increases the retardation effect caused by the solid matrix. This work developed a predictive model for the transport of colloid-facilitated radionuclides in porous medium and to assess the importance of various phenomenological coefficients, particularly parameters for the adsorption interactions.     

The decomposition of wood products in landfills in Sydney, Australia

Three landfill sites that had been closed for 19, 29 and 46 years and had been operated under different management systems were excavated in Sydney. The mean moisture content of the wood samples ranged from 41.6% to 66.8%. The wood products recovered were identified to species, and their carbon, cellulose, hemicellulose and lignin concentration were determined and compared to those of matched samples of the same species. No significant loss of dry mass was measured in wood products buried for 19 and 29 years, but where refuse had been buried for 46 years, the measured loss of carbon (as a percentage of dry biomass) was 8.7% for hardwoods and 9.1% for softwoods, equating to 18% and 17% of their original carbon content, respectively. The results indicate that published decomposition factors based on laboratory research significantly overestimate the decomposition of wood products in landfill.     

Trends in the Water Chemistry of High Altitude Lakes in Europe

Here we present the chemical trends of seven high altitude lakes, analysed within the AL:PE and MOLAR Projects of the EU (1999) and selected on the basis of the availability of complete and reliable data for the period 1984–1999. The lakes are representative of the Scandinavian Alps, the Cairngorm Mountains in Scotland, the Alps and the Pyrenees. Significant trends were identified for some indicators of acidification, for instance pH and alkalinity, but not all lakes reacted similarly to decreasing depositions of sulphate and base cations. Differences in lake response are discussed in relation to recent variations of atmospheric deposition chemistry and associated changes in climatic conditions. Beside individual variations of the studied lakes, depending, among other things, on altitude and morphology, catchment characteristics and climate trends play a major role for the reaction of high altitude lakes on changes in atmospheric depositions.     

氯碱行业盐泥综合利用的研究进展

综述了近年来氯碱企业盐泥综合利用的最新研究现状和进展。盐泥的综合利用途径主要包括制备轻质氧化镁、硫酸钙晶须;研制添加剂、吸附剂用于空气和水处理;制备建筑材料,如水泥、保温砖、建筑涂料;制作碱性化肥等。目前,许多技术尚不成熟,仍处于试验阶段。指出了我国盐泥资源化综合利用存在的问题及解决途径。     

撞击流技术在环保领域的应用研究进展

撞击流作为一种过程强化技术,其优势在于能够显著强化相间传递和微观混合,可应用于环保工艺、设备中,以达到提高污染物去除效率的目的。本文在简述撞击流基本原理和特性的基础上,详细阐述了国内外撞击流技术在细颗粒物(PM2.5)脱除、烟气脱硫脱硝、废水处理、废气吸收等方面的应用现状,分析了该技术的应用效果和优势,同时介绍了一种可用于废水处理的新型双组分层式撞击流反应器。最后指出,深入探究撞击流复杂体系的机理以及耦合其他新型技术是未来研究的主要方向。     

Analysis of potential for reducing emissions of greenhouse gases in municipal solid waste in Brazil,in the state and city of Rio de Janeiro

This paper examines potential changes in solid waste policies for the reduction in GHG for the country of Brazil and one of its major states and cities, Rio de Janeiro, from 2005 to 2030. To examine these policy options, trends in solid waste quantities and associated GHG emissions are derived. Three alternative policy scenarios are evaluated in terms of effectiveness, technology, and economics and conclusions posited regarding optimal strategies for Brazil to implement. These scenarios are been building on the guidelines for national inventories of GHG emissions (IPCC, 2006) and adapted to Brazilian states and municipalities’ boundaries. Based on the results, it is possible to say that the potential revenue from products of solid waste management is more than sufficient to transform the current scenario in this country into one of financial and environmental gains, where the negative impacts of climate change have created a huge opportunity to expand infrastructure for waste management.     

Assessment of the leaching of metallic elements in the technology of solidification in aqueous solution

Results are presented of experiments performed to optimize the solidification/stabilization system for metallic elements in aqueous solution. This system involves mixing cement and a solution of metallic elements in a conventional mixer: the paste thus obtained is transferred drop by drop into a recipient filled with an aqueous solution of NaOH at 20% by weight, in which it solidifies immediately. The separate use of chloride solutions of Li+, Cr3+, Pb2+ and Zn2+ makes it possible to obtain granules displaying various levels of compressive strength. Three different inertization matrices were used in the experiments, the first consisting solely of Portland cement, the second of Portland cement and a superplasticizer additive, and the third of Portland cement partially replaced with silica-fume and superplasticizer. The results of the tests performed showed a very low level of leaching into the alkaline solidification solution for Cr3+, the quantity leached being under 2% as against higher levels for the other metallic elements. For all the considered elements, the best results were obtained by using silica-fume in the inertization matrix.     

稀土在废水处理中的应用进展

综述了国内稀土金属在废水处理中的最新应用进展,总结了稀土复合吸附剂的制备方法及其在含磷、氨氮、砷、氟、铬、镉等废水处理中的效果,讨论了稀土复合混凝剂和稀土催化剂在染料、助剂、化工等高浓度有机废水处理中的应用,为找到高效环保的处理工业废水的方法提供了依据.     

Stabilization/solidification of ashes in clays used in the manufacturing of ceramic bricks.

This paper presents the results of the lixiviation of metals from different mixtures of fly and bottom ashes that have been stabilized and solidified in clays used in the manufacture of bricks. The ashes used for this study were obtained from a Hoffmann-type brick furnace adapted for the incineration of municipal solid waste during the manufacturing of ceramic bricks. The ashes were stabilized in clay in different proportions of clay:ash mix (99:1, 95:5, 90:10, 80:20 and 60:40). Such mixes were used to manufacture bricks that were calcined at a temperature ranging from 50 to 1100 degrees C. The clay, ashes and manufactured bricks were characterized using X-ray diffraction, fluorescent X-ray, thermogravimetry, differential thermal analysis, atomic absorption spectroscopy and scanning electronic microscopy. In addition, toxicity characteristic leaching procedure lixiviation tests were performed according to the EPA 1311 method for the determination of heavy metals. The results showed an affinity between clay and ash, and also that the bricks manufactured with these mixtures present low lixiviation levels. The tests also showed the highest decrease in the concentration of arsenic, nickel, chromium, zinc and silver for 99:1 mixtures. The 95:5 mixture was found to be the most favourable for the stabilization (greater concentration decrease) of lead and cadmium. Selenium was the metal with the lowest concentration change whereas arsenic, nickel, chromium, zinc and cadmium showed the greatest concentration change in all mixtures, with the exception of cadmium in the mixture 99:1.     

广州市推动再生资源回收利用行业转型的有效探索

广州市作为国家再生资源回收体系建设试点城市,在大力发展循环经济、推进再生资源回收利用网络体系建设方面进行了先行先试探索,取得了明显成效。“广州模式”对推进广东省加快转型升级具有启示借鉴意义。     

Effect of inoculation in composting processes: modifications in lignocellulosic fraction

Three microbial isolates, identified as Bacillus shackletonni, Streptomyces thermovulgaris and Ureibacillus thermosphaericus were tested as inoculants in composting processes in relation to their capacity to improve lignocellulose degradation. Different wastes from agricultural activities were used as raw material for the heaps: pepper plant waste (PPW) as the main component and olive-oil mill waste (OMW), almond shell (AS), pruning waste (PW) and rice straw (RS) as additives. Cellulose was more extensively degraded than hemicellulose and lignin, although the use of inoculants (B. shackletonni and S. thermovulgaris) improved the action of the autochthonous microbiota just in the AS heaps. A higher efficiency was observed for lignin, since lower concentrations of this polymer were detected in the inoculated heaps in relation to control heaps. U. thermosphaericus was the most efficient microorganism since inoculation with this strain decreased the final lignin content in a range between 17.23% and 24.34%. S. thermovulgaris and B. shackletonni led to a higher reduction of the lignin levels in the OMW and PW heaps (14.25% and 19.07% less lignin than control heaps) and OMW (13%), respectively. The composting process can therefore be improved by means of inoculation if the microorganisms used for this purpose are appropriate for the characteristics of the raw material.     

Pilot project of mechanical-biological treatment of waste in Brazil

By mechanical-biological treatment (MBT) of residual municipal solid waste the behaviour of landfills can be significantly improved. After MBT the organic content (COD and BOD5), total organic carbon, and total nitrogen in the leachate, as well as the gas production rate, are reduced to values lower than 90% of the fresh untreated waste. The volume of the stabilized material to be disposed on landfills decreases enormously, by up to 70%. The monitoring effort for a landfill constructed under these conditions is reduced to a minimum and the stabilized material can be used in other ways, as material for reforestation, for cover material or for thermal utilization to produce energy. Environmental conditions are important in MBT, as well as waste characteristics. This paper describes the results of a pilot project of MBT performed in Rio de Janeiro, Brazil. The results have shown that this technology can be used successfully in developing countries, with economy for the society and important results for the environment.     

Integrated assessment of a new Waste-to-Energy facility in Central Greece in the context of regional perspectives

The main aim of this study is the integrated assessment of a proposed Waste-to-Energy facility that could contribute in the Municipal Solid Waste Management system of the Region of Central Greece. In the context of this paper alternative transfer schemes for supplying the candidate facility were assessed considering local conditions and economical criteria. A mixed-integer linear programming model was applied for the determination of optimum locations of Transfer Stations for an efficient supplying chain between the waste producers and the Waste-to-Energy facility. Moreover different Regional Waste Management Scenarios were assessed against multiple criteria, via the Multi Criteria Decision Making method ELECTRE III. The chosen criteria were total cost, Biodegradable Municipal Waste diversion from landfill, energy recovery and Greenhouse Gas emissions and the analysis demonstrated that a Waste Management Scenario based on a Waste-to-Energy plant with an adjacent landfill for disposal of the residues would be the best performing option for the Region, depending however on the priorities of the decision makers. In addition the study demonstrated that efficient planning is necessary and the case of three sanitary landfills operating in parallel with the WtE plant in the study area should be avoided. Moreover alternative cases of energy recovery of the candidate Waste-to-Energy facility were evaluated against the requirements of the new European Commission Directive on waste in order for the facility to be recognized as recovery operation. The latter issue is of high significance and the decision makers in European Union countries should take it into account from now on, in order to plan and implement facilities that recover energy efficiently. Finally a sensitivity check was performed in order to evaluate the effects of increased recycling rate, on the calorific value of treated Municipal Solid Waste and the gate fee of the candidate plant and found that increased recycling efforts would not diminish the potential for incineration with energy recovery from waste and neither would have adverse impacts on the gate fee of the Waste-to-Energy plant. In general, the study highlighted the need for efficient planning in solid waste management, by taking into account multiple criteria and parameters and utilizing relevant tools and methodologies into this context.     

The Assessment of Atmospheric Pollution using Satellite Remote Sensing Technology in Large Cities in the Vicinity of Airports

This paper investigates the potential of usingsatellite remotely sensed imagery for assessing atmosphericpollution. A novel approach, which comprised radiativetransfer calculations and pseudo-invariant targets fordetermining aerosol optical thickness has been developed.The key parameter for assessing atmospheric pollution inphotochemical air pollution studies is the aerosol opticalthickness. The need for identifying suitable pseudo-invariantobjects in satellite images of urban areas is of great interest for increasing the potential of earthobservation for monitoring air pollution in such areas. Theidentification of large water bodies and concrete apronsthat can serve as suitable dark and bright targetsrespectively in different geographical areas wasdemonstrated in this study. This study added evidence onthe correlation found between the visibility valuesmeasured at Heathrow Airport area during satellite overpassand aerosol optical thickness derived from Landsat-5 TMband 1 images.     

Estimation of future outflows of e-waste in India

The purpose of this study is to construct an approach and a methodology to estimate the future outflows of electronic waste (e-waste) in India. Consequently, the study utilizes a time-series multiple lifespan end-of-life model proposed by Peralta and Fontanos for estimating the current and future quantities of e-waste in India. The model estimates future e-waste generation quantities by modeling their usage and disposal. The present work considers two scenarios for the approximation of e-waste generation based on user preferences to store or to recycle the e-waste. This model will help formal recyclers in India to make strategic decisions in planning for appropriate recycling infrastructure and institutional capacity building. Also an extension of the model proposed by Peralta and Fontanos is developed with the objective of helping decision makers to conduct WEEE estimates under a variety of assumptions to suit their region of study. During 2007–2011, the total WEEE estimates will be around 2.5 million metric tons which include waste from personal computers (PC), television, refrigerators and washing machines. During the said period, the waste from PC will account for 30% of total units of WEEE generated.     

酶法合成生物柴油的研究进展

生物柴油是一种清洁可再生的生物能源,是石油燃料的理想替代物。酶法合成生物柴油具有提取简单、反应条件温和、醇用量小、甘油易回收和无废物产生等优点。综述了脂肪酶与固定化脂肪酶、全细胞生物催化剂在生物柴油生产中应用的新进展,并对我国生物柴油产业的发展提出了建议。     

我国电子垃圾回收存在的问题与解决途径

介绍了我国电子垃圾回收利用存在的问题与现状、国外可供借鉴的经验,以及电子垃圾分类情况,最后提出我国电子垃圾再生利用的产业化发展方向。     

Effects of cosolvency in the fate and transport of PCBs in soil

Under the purview of EPA's Remedial Engineering Management (REM III) Superfund contract, a CERCLA RI/FS was performed at the Pinettes Salvage Yard site located in Washburn, Maine (EPA Region I). The purpose of the RI/FS was to fully characterize the nature, extent, and fate and transport of PCB contamination resulting from an alleged surface spill of transformer dielectric fluid containing Arochlor 1260 (a polychlorinated biphenyl) and various volatile and semivolatile organic constituents. The RI/FS was performed subsequent to both an immediate removal action (IRA) and a deletion remedial investigation (DRI) performed by EPA contractors. Results of both efforts indicated that the site was unsuitable for deletion from the National Priorities List (NPL) because the site soils contained elevated levels of PCBs. This article presents a case history of the extensive field investigations performed to characterize the contaminant source and evaluate the fate and transport of PCBs in site soils. These investigations included on-site mobile laboratory gas chromatograph (GC) analytical techniques for PCBs and targeted volatile and semivolatile organic compounds; confirmatory Contact Laboratory Program (CLP) laboratory analyses of soils, sediments, surface water, and groundwater samples; statistical analyses and correlation of field mobile laboratory GC data with CLP laboratory analytical results; and an evaluation of the potential effects of cosolvency in the fate and transport of PCBs in subsurface soils.     

Deposition Loads of Sulphur and Nitrogen in Germany

High spatial resolution maps of deposition loads in Germanyare produced as an input for abatement strategy research andfor critical loads exceedance calculations on a nationalscale. In this paper methods ofmapping total deposition loads in Germany and preliminarymaps of nitrogen and sulphur deposition loads for the year1993 are presented. A comparison of these mapping resultswith EMEP deposition mapping results has been carried out.The differences in the results of the German national and theEuropean EMEP mapping, due to different databases anddifferent methods, are quantified and discussed. Highresolution maps of deposition loads are compared to Europeanlow resolution maps on the same temporal and spatial scale,assuming that on average both should lead to similar results.However, the average differencescalculated for 23 EMEP 150 × 150 km² grid cells over Germanywere found to be 33% higher for sulphur (S) total depositionby the German method 65% higher for S dry deposition and1% lower for S wet deposition. The German results fornitrogen (N) total deposition are 2% higher than the EMEPresult 22% higher for N dry deposition and 10% lower for Nwet deposition.     

The in situ treatment of synthetic musk fragrances in groundwater

Synthetic musk fragrances (SMFs) have been shown to be micropollutants in various aquatic and groundwater systems, often occurring at microgram per liter concentrations. Studies have shown that the most commonly detected SMFs in water are nitro musks and polycyclic musks. The SMFs are typically introduced into the environment in continuous streams such as from wastewater and land application of wastewater or sludge generated during wastewater treatment. Various studies for the treatment of SMFs have been undertaken for wastewater but studies for the treatment of SMFs in groundwater are limited, especially for in situ treatment. A pilot‐scale test was conducted to determine if the use of colloidal activated carbon (CAC) could effectively reduce dissolved concentrations of nitro and polycyclic synthetic musk compounds including musk xylene, musk ketone, galaxolide, and tonalide. The pilot test was carried out downgradient of a septic system in Central Canada where a series of nitrification and denitrification reactions are occurring in an unconfined aquifer. A 10‐weight percent CAC solution was injected into a series of temporary direct push injection points to target the synthetic musk plume. The plume contained galaxolide and tonalide concentrations up to 687 and 187 nanograms per liter (ng/L), respectively, while the concentrations of musk ketone and musk xylene were below the method detection limit (20 ng/L). A total of 13,950 liters of CAC solution was injected during one injection event. The pilot test results indicated that the CAC was effectively delivered to the target injection zone resulting in an increase in total organic carbon concentrations within the saturated soil greater than two orders of magnitude compared to the background concentrations. Analyses of the groundwater chemistry before and post‐injection indicated that the CAC had no detrimental impact on the groundwater quality while reducing the concentration of dissolved galaxolide and tonalide within the plume to below the method detection limits within 51 days of injection with the exception of two of the 14 wells monitored which had galaxolide and tonalide concentrations up to 78 and 35 ng/L. Within 6 months of application, the concentrations of galaxolide and tonalide had decreased to below the method detection limits. Subsequent monitoring of the groundwater quality over a one‐year period failed to detect galaxolide and tonalide, suggesting that the CAC was effective in attenuating the galaxolide and tonalide.