Production of artificial aggregates by granulation and carbonation of recycled concrete fines

There is a growing need to find ways to reuse fine concrete waste from the construction industry. In this study, recycled concrete fines were granulated and used as lightweight aggregates. Ladle slag, a steel industry residue, was used as a co-binder in different ratios (0, 10, 20, and 30%). The materials were blended and granulated, and then the granules were cured in three conditions: ambient condition, humidity chamber, and carbonation chamber. The results showed that the ladle slag content of 30% cured in a humidity chamber produced the strongest granules, with a crushing strength of 127 N, which was 135% greater than a commercial lightweight aggregate. The granules generally had satisfactory density and water absorption with a higher ladle slag content. Carbonation increased the granule strength with a low ladle slag content and decreased the granules’ water absorption. The improved physical and mechanical properties of carbonated granules are attributed to the formation of calcium carbonate during the carbonation process. The granules produced in this study show good potential for use as lightweight aggregates in the construction industry.

Graphical abstract

     

Utilization of alum sludge waste for production of eco-friendly blended cement

This work was focused on evaluating the suitability of replacing Portland cement (PC) by 5, 10 and 15 mass % of activated alum sludge waste (AAS) as a pozzolanic material. Exploitation of low-cost nanocomposite for bolstering the physical, mechanical, and stability against firing of PC–AAS-hardened composites was inspected. CuFe₂O₄ spinel nanoparticle with average particle size (~ 50 nm) was prepared. Inclusion of CuFe₂O₄ spinel in different PC–AAS-hardened composites bolsters their physicomechanical features at almost normal curing ages as well as their stability against firing. The positive impact of synthesized CuFe₂O₄ spinel was affirmed via TGA/DTG and XRD techniques, which indicated the presence of diverse hydration yields such as CSHs, CASHs, CFSH, and CuSH that enhance the overall physicomechanical characteristics and thermal stability of various PC–AAS-hardened composites. The composite containing (90 PC–10 AAS waste–2 CuFe₂O₄) offers many benefits from the economic and environmental view.

Graphical abstract

     

Estimating uncertainties in the life cycle assessment of composting household biowaste and urban green waste in Germany

Life cycle assessment (LCA) of waste treatment processes is often associated with considerable uncertainties. The aim of this study is to estimate the total uncertainty in the modelled composting system and the influence of material and process parameters on the uncertainty. Four composting combinations with fresh (FC) and mature substrate compost (MSC) from partially enclosed (PEC) and open composting (OC) were investigated. Perturbation analysis was used to determine the effect of parameters on the result and Monte Carlo simulation was used to estimate the total uncertainty. This study showed that the production of MSC using PEC had the lowest overall impacts across all impact categories except ozone depletion. Results of the Monte Carlo simulation showed that comparing composting options was challenging. The sensitivity ratios obtained from the perturbation analysis showed that the process parameter percentage of carbon fraction degraded was the most influential for FC. In MSC, the moisture content in the input material and the substitution factor used for peat were the most influential. Monte Carlo simulations demonstrated the overall uncertainty of the model and its relevance when comparing results between combinations. The perturbation analysis identified the parameters that required more accurate data to reduce the uncertainty in the model.

Graphical abstract

     

An Overview on Starch-Based Sustainable Hydrogels: Potential Applications and Aspects

Hydrogels are a kind of three dimensional polymeric network system which has a significant amount of water imbibing capacity despite being soluble in it. Because of the potential applications of hydrogels in different fields such as biomedical, pharmaceutical, personal care products, biosensors, and cosmetics, it has become a very popular area of research in recent decades. Hydrogels, prepared from synthetic polymers and petrochemicals are not ecofriendly. For preparing biodegradable hydrogels, most available plant polysaccharides like starch are utilized. In its structure, starch has a large number of hydroxyl groups that aid in hydrogel networking. For their easy availability and applications, starch-based hydrogels (SHs) have gained huge attention. Moreover, SHs are non-toxic, biocompatible, and cheap. For these reasons, SHs can be an alternative to synthetic hydrogels. The main focus of this review is to provide a comprehensive summary of the structure and characteristics of starch, preparation, and characterization of SHs. This review also addresses several potential multidimensional applications of SHs and shows some future aspects in accordance.

Graphic abstract

     

Novel Pretreatment Performance Evaluation for Cellulose Nanofibrils Extraction from Ficus natalensis Barkcloth

Recently, nanosized cellulose materials extraction is extensively interesting from the sources of sustainable materials. Cellulose nanofibrils (CNF) extraction through green bio-based materials featured as promising interest in the field of science. In this study, dimethyl sulfoxide (DMSO) was applied to examine its effectiveness in pretreating the Ficus natalensis barkcloth cellulose (FNBC) for CNF production before 2,2,6,6,-tetramethylpiperidine-1-oxyl (TEMPO) oxidation. The pretreatment performance of DMSO was evaluated based on the structural and morphological changes. DMSO pretreated FNBC attained the most dramatic morphological changes as compared to untreated cellulose samples. The results of the scanning electron microscope (SEM) and transmission electron microscope (TEM) shows that there is an extensive structural disruption of FNBC during the pretreatment process, which could be because of outstanding ability to eliminate non-cellulosic materials and amorphous regions from the FNBC, confirmed by the X-ray diffractometry (XRD) showing higher crystallinity values, as well as higher thermal stabilities values of pretreated FNBC samples, were also noted. Overall, this study revealed a tremendously effective and pioneer pretreatment method for fractionating FNBC, to stimulate the successive extraction of cellulose nanofibrils. Furthermore, based on the cellulose and CNF characterizations, this study showed that F. natalensis barkcloth could be considered as an alternative source of cellulose for potential value-added industrial applications such as the food industry, paper making, and biomedicines.

Graphic Abstract

     

A simplified material flow analysis employing local expert judgment and its impact on uncertainty

Material flow analysis (MFA) is an effective tool for waste management, but low- and middle-income countries lack essential data for MFA. This study proposed a simplified MFA (sMFA) utilizing local expert judgment (LEJ) and examining the impact of simplification on its uncertainty. A stochastic sMFA model was developed for nitrogen and phosphorus in urban Mandalay, Myanmar. This model was compared with the intensive MFA (iMFA) model employing intensive surveys for primary data collection. For the total loadings to the environment, the medians of the sMFA were higher by 3% and 11%, respectively, for nitrogen and phosphorus than those of the iMFA. The widths of the 80% confidence intervals of these loadings in the sMFA, normalized by those in the iMFA, were − 0.05 and − 0.11, respectively. The three largest flows to the environment were the same for the two models: on-site sanitation effluent/leakage, greywater, and industrial wastewater. Large median gaps between the models were observed for industrial wastewater, fecal sludge, and human excreta, associated with informal waste management, whereby LEJ did not work well. Overall, the sMFA demonstrated a good estimation of nitrogen and phosphorus flows with limited increase of uncertainty, still requiring focused attention on informal waste streams.

Graphical abstract

     

Alkoxy-silyl Induced Agglomeration: A New Approach for the Sustainable Removal of Microplastic from Aquatic Systems

The substance class of inert organic-chemical stressors (IOCS) describes organic-chemical (macro-) molecules, which demonstrate a high level of persistence upon entry in the ecosystem, and whose degradation is limited. These synthetically produced organic-chemical macromolecules, which are often derived from the polymerization of different monomers, are, in the form of plastics, indispensable in the everyday world. They enter the environmental compartments and cause great damage due to primary (industry, cosmetic, washing of textile), and secondary (degradation) entry. If these particles get into aquatic systems, this has fatal consequences for the ecosystem such as the death of marine animals, or bioaccumulation. Wastewater treatment plants are reaching their limits and require innovative ideas for the sustainable removal of microplastic. This article examines a new approach to the removal of polymers from aquatic systems (lab scale) by using sol–gel induced agglomeration reactions to form larger particle agglomerates. These enlarged agglomerates can be separated much more easily from the wastewater, since they float on the water surface. Separation systems, e.g. sand trap can easily be used. A further advantage is that the agglomeration can be carried out completely independently of the type, size, and amount of the trace substance concentration as well as of the external influences (pH value, temperature, pressure). Thus, this new type of particle separation can not only be used in sewage treatment plants, but can also be transferred to decentralized systems (e.g. implementation in industrial processes).

Graphical Abstract

Open image in new window

     

Acid Rain in Downtown São Paulo City, Brazil

During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown São Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, $ \rm NH^{ + }_{4} During the period from July 2002 to June 2004, the chemical characteristics of the rainwater samples collected in downtown S?o Paulo were investigated. The analysis of 224 wet-only precipitation samples included pH and electrical conductivity, as well as major ions (Na⁺, , K⁺, Ca²⁺, Mg²⁺, Cl⁻, , ) and carboxylic acids (acetic, formic and oxalic) using ion chromatography. The volume weighted mean, VWM, of the anions , and Cl⁻ was, respectively, 20.3, 12.1 and 10.7 μmol l⁻¹. Rainwater in S?o Paulo was acidic, with 55% of the samples exhibiting a pH below 5.6. The VWM of the free H⁺ was 6.27 μmol l⁻¹), corresponding to a pH of 5.20. Ammonia (NH₃), determined as (VWM = 32.8 μmol l⁻¹), was the main acidity neutralizing agent. Considering that the H⁺ ion is the only counter ion produced from the non-sea-salt fraction of the dissociated anions, the contribution of each anion to the free acidity potential has the following profile: (31.1%), (26.0%), CH₃COO⁻ (22.0%), Cl⁻ (13.7%), HCOO⁻ (5.4%) and (1.8%). The precipitation chemistry showed seasonal differences, with higher concentrations of ammonium and calcium during autumn and winter (dry period). The marine contribution was not significant, while the direct vehicular emission showed to be relevant in the ionic composition of precipitation.     

Trends in Chemical Composition of Wet-only Precipitation at Rural French Monitoring Stations Over the 1990–2003 Period

The long-term monitoring of precipitation and its chemical composition are important for identifying trends in rain quality and for assessing the effectiveness of pollution control strategies. A statistical test has been used to the atmospheric concentrations measured in the French rural monitoring network (MERA) in order to bring out spatio-temporal trends in precipitation quality in France over the period 1990–2003. The non-parametric Mann–Kendall test which has been developed for detecting and estimating monotonic trends in the time series was used and applied in our study at annual values of wet-only precipitation concentrations. The emission data suggest that SO₂ and NO _x emissions decreased (−3.3 and −2.0% year⁻¹, respectively) contrary to NH₃ emissions that increased slightly (+0.2% year⁻¹) over the period 1990–2002 in France. On the national scale, the pH values have a significant decreasing trend of −0.025 ± 0.02 unit pH year⁻¹. and concentrations in precipitation have a significant decreasing trend, −3.0 ± 1.6 and −3.3 ± 0.6% year⁻¹, respectively, corresponding with the downward trends in SO₂ emissions in France (−3.3% year⁻¹). A good correlation (R ² = 0.84) between SO₂ emissions and concentrations was obtained. The decreasing trend of was more significant (−5.4 ± 5.2% year⁻¹) than that of (−1.3 ± 2.4% year⁻¹). Globally, the concentration of the major ions showed a clear downward trend including marine and alkaline ions. In addition, the relative contribution of HNO₃ to acidity precipitation increased by 51% over the studied period.     

Hydrodechlorination/detoxification of PCDDs,PCDFs, and co-PCBs in fly ash by using calcium polysulfide

Dioxins like polychlorinated dibenzo-p-dioxins (PCSDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) are mainly emitted from waste incinerators (WIs) and have become an international research focus because of its serious concerns over the adverse health effects. The detoxification of PCCDs/Fs and PCBs is very difficult because of their stable chemical structure. A significant hydrodechlorination/detoxification of polychlorinated 1-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs) and polychlorinated biphenyls (PCBs) were achieved in fly ash by using an aqueous mixture of calcium hydroxide and sulfur. Two different fly ashes were studied: originating from municipal waste incinerator (FA1) and industrial waste incinerator (FA2). They were heated with the aqueous mixture at 150 °C for 30 or 60 min with agitation. Higher decomposition (87%) and detoxification (87.7%) of PCDD/Fs and PCBs were achieved at 150 °C with two runs; every run was for 30 min, compared to one run for 60 min. FA2 gave higher decomposition and detoxification as compared to FA1, which might be due to higher metal content that played a catalytic role to decompose and detoxify the PCDDs, PCDFs and PCBs. The decomposition and detoxification of PCDFs in fly ash was higher than PCDDs and was augmented with increasing number of chlorides on aromatic compounds. As the highly significant decomposition and detoxification of higher concentration of PCDD/Fs and PCBs were achieved in 1 hour without additive catalyst and at low temperature of 150 °C, therefore, the developed method is cost effective and most suitable to apply on commercial/industrial level. The detail results of hydrodechlorination/detoxification of PCDD, PCDFs at different conditions are described and its mechanism is discussed.     

Removal of carbon constituents from hospital solid waste incinerator fly ash by column flotation

Hospital solid waste incinerator (HSWI) fly ash contains a large number of carbon constituents including powder activated carbon and unburned carbon, which are the major source of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in fly ash. Therefore, the removal of carbon constituents could reduce PCDD/Fs in fly ash greatly. In this study, the effects of the main flotation parameters on the removal of carbon constituents were investigated, and the characteristics of the final product were evaluated. The results showed that loss on ignition (LOI) of fly ash increased from 11.1% to 31.6% during conditioning process. By optimizing the flotation parameters at slurry concentration 0.05 kg/l, kerosene dosage 12 kg/t, frother dosage 3 kg/t and air flow rate 0.06 m³/h, 92.7% of the carbon constituents were removed from the raw fly ash. Under these conditions, the froth product has LOI of 56.35% and calorific values of 12.5 MJ/kg, LOI in the tailings was below 5%, and the total toxic equivalent (TEQ) of PCDD/Fs decreased from 5.61 ng-TEQ/g in the raw fly ash to 1.47 ng-TEQ/g in the tailings. The results show that column flotation is a potential technology for simultaneous separation of carbon constituents and PCDD/Fs from HSWI fly ash.     

Size Distribution of Inorganic Species and Their Inhaled Dose in a Detergent Industrial Workplace

Aerosol particles in the workplace of a detergent industry were sampled during July 2005 by a Berner low-pressure impactor. The samples were analyzed by atomic absorption spectrometry and ion chromatography in order to determine the size distribution of metallic elements and water-soluble inorganic ions. The size distributions of some characteristic metallic elements (Cu, Fe, Al) were unimodal with their maximum found in coarse particles. Among the water-soluble aerosol components , , Cl⁻, and Ca⁺⁺ were the major contributors to total particle mass. The lung deposition resulting from the partially hygroscopic aerosol is estimated. The calculated lung deposition reveals the impact of separate chemical aerosol compounds on the levels of the inhaled dose. The differences observed between the total and regional deposition of the different compounds appear mainly due to their different size distributions. An erratum to this article can be found at     

Sources and behaviour of polybrominated diphenyl ethers (PBDEs), polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in Spanish sewage sludge

Presence, sources and behaviour of polybrominated diphenyl ethers (PBDEs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were evaluated in Spanish sewage sludge. A total of 120 samples were seasonally collected from October 2005 to September 2006 at 31 urban wastewater treatment plants (WWTPs). Concentrations of PBDEs (ranging between 57.5 and 2606 ng/g dry weight) were two to three orders of magnitude higher than those obtained for PCDDs (0.17-5.03 ng/g d.w.) and PCDFs (0.05-3.07 ng/g d.w.). All the samples presented International Toxicity Equivalents (I-TEQ) levels (ranging between 2.06 and 44.4 ng/kg d.w.) below the limit values proposed by European Union for land application. Congener patterns evaluation revealed that the use of Deca-BDE commercial mixture seems to be the major source of PBDEs in the sludge. Nevertheless, origin of PCDD/Fs should be related to atmospheric deposition, faeces and presence of PCDD/Fs precursors such as pentachlorophenol in the sludge. No correlations (p > 0.05) were found between pollutant concentrations (PBDEs and PCDD/Fs) and wastewater treatment plant (WWTP) characteristics (capacity nor sludge rate). Lower levels of PBDEs and PCDFs were found in WWTPs using biological nitrogen and phosphorous elimination, suggesting that these compounds are susceptible of microbial elimination. According to our knowledge, this is the first work comparing together both PBDEs and PCDD/Fs sludge patterns.     

Acidification at Plastic Lake,Ontario: Has 20 Years Made a Difference?

In response to reduced sulphur emissions, there has been a large decrease in sulphate (; −0.97 μeq l⁻¹ year⁻¹) and hydrogen (−1.18 μeq l⁻¹ year⁻¹) ion concentration in bulk precipitation between 1980 and 2000 at Plastic Lake in central Ontario. The benefit of this large reduction in deposition on stream water chemistry was assessed using the gauged outflow from a conifer-forested catchment (PC1; 23.3 ha), which is influenced by a small wetland located immediately upstream of the outflow. Sulphate concentrations declined, but not significantly due to large inter-annual variation in concentration. Between 1980 and 2000, there were significant increases in dissolved organic carbon, ammonium and potassium concentration likely reflecting increased mineralisation in the wetland. Calcium concentrations in PC1 decreased during the two decade period (−2.24 μeq l⁻¹ year⁻¹), as a consequence there was no improvement in stream pH and the Ca:Al ratio in PC1 continued to decline. A similar response was noted in an upland-draining sub-catchment of PC1-08 that has been monitored since 1987. Despite large reductions in deposition and almost complete retention of nitrogen in soil, there has been no improvement (in terms of pH) in stream water at PC1 due to a combination of soil acidification and climatic (droughts, increased mineralisation) perturbations.     

Can Nutrient Spiralling be Used to Detect Seasonal Nutrient Uptake in a Forested Stream?

Nutrient spiralling measurements were conducted in Lyrebird Creek, a forested stream in the Dandenong Ranges, Victoria, Australia. Spiralling indices from several nutrient (, ) enrichment experiments were correlated with seasonal variation in factors thought to control nutrient uptake, i.e., temperature, light and algal biomass. It was hypothesized that nutrient uptake would be higher in summer as increased temperatures would promote both biotic and abiotic processes and higher light levels in summer would stimulate photosynthesis. However, results did not support this hypothesis. Uptake length for and and uptake velocity were not correlated with chlorophyll-a, light or temperature (r ² < 0.30, P > 0.1) despite the seasonality of these biophysical factors (r ² > 0.42, P < 0.02). Lyrebird Creek might had no seasonal trend in nutrient uptake and/or nutrient spiraling measurements only appears suitable for contrasting streams with large differences in biophysical factors that supports biotic and abiotic nutrient processing. In addition, small errors in measuring a nutrient concentration can result in a large range in the estimated S _w and increased difficulty in determining significant differences in nutrient spiralling indices.     

Nutrient Dynamics in Jiaozhou Bay

Three cruises were carried out in Jiaozhou Bay (JZB) in the neap tide in October 2002 (fall) and in both neap and spring tides in May 2003 (spring) to understand the relative importance of external nutrient inputs versus physical transport and internal biogeochemical processes. Nutrients (, , , , silicic acid, total dissolved nitrogen (TDN) and phosphorus (TDP), dissolved organic nitrogen (DON) and phosphorus (DOP)) were measured. The concentrations of nutrients were higher in the northern part than in the southern part. High concentrations of and DON in JZB demonstrated the anthropogenic input. Ambient nutrient ratios indicated that the potential limiting nutrients for phytoplankton growth were silicon, and then phosphorus. Nutrients showed an obvious tidal effect with low values at flood tide and high values at ebb tide. Nutrient elements were transported into JZB in the north and output in the south (i.e., into the Yellow Sea), which varied with season, tidal cycle and investigation sites. Water exchange between JZB and the Yellow Sea exports , and DON out of JZB, while it inputs , silicic acid and DOP into JZB. Nutrient budgets demonstrate that riverine input and wastewater discharge are major sources of nutrients, while residual flow is of minor importance in JZB ecosystem. JZB is a sink for the nutrient elements we studied except for DON. Stoichiometric calculations demonstrate that JZB is a net autotrophic system.     

Modelling Phosphorus Retention in Lakes and Reservoirs

Steady-state models for the prediction of P retention coefficient (R) in lakes were evaluated using data from 93 natural lakes and 119 reservoirs situated in the temperate zone. Most of the already existing models predicted R relatively successfully in lakes while it was seriously under-estimated in reservoirs. A statistical analysis indicated the main causes of differences in R between lakes and reservoirs: (a) distinct relationships between P sedimentation coefficient, depth, and water residence time; (b) existence of significant inflow–outflow P concentration gradients in reservoirs. Two new models of different complexity were developed for estimating R in reservoirs: , where τ is water residence time (year), was derived from the Vollenweider/Larsen and Mercier model by adding a calibrated parameter accounting for spatial P non-homogeneity in the water body, and is applicable for reservoirs but not lakes, and , where [P_in] is volume-weighted P concentration in all inputs to the water body (μg l⁻¹), was obtained by re-calibrating the OECD general equation, and is generally applicable for both lakes and reservoirs. These optimised models yield unbiased estimates over a large range of reservoir types.     

Nitrogen Saturation of Terrestrial Ecosystems: Some Recent Findings and Their Implications for Our Conceptual Framework

The consequences of nitrogen (N) enrichment for terrestrial and freshwater ecosystems are of increasing concern in many areas due to continued or increasing high emission rates of reactive N. Within terrestrial ecosystems various conceptual frameworks and modelling approaches have been developed which have enhanced our understanding of the sequence of changes associated with increased N availability and help us predict their future impacts. Here, some recent findings are described and their implications for these conceptual frameworks and modelling approaches discussed. They are: (a) an early loss of plant species that are characteristic of low N conditions as N availability increases and a loss of species with high N retention efficiencies (so called N ‘filters’), (b) suppression of microbial immobilisation of deposited due to increased availability in the early stages of N saturation, (c) the early onset of leaching due to these changes (a and b above) in both plant and microbial functioning, (d) reduced sensitivity of vegetation to N additions in areas with high historical N deposition, (e) delayed changes in soil C:N changes due to increased net primary productivity and reduced decomposition of soil organic matter. Some suggestions of early indicators of N saturation are suggested (occurrence of mosses; ratio in surface soils) which indicate either a shift in ecosystem function and/or structure.     

The Influence of Chironomus plumosus Larvae on Nutrient Fluxes and Phosphorus Fractions in Aluminum Treated Lake Sediment

One of the methods to diminish the internal phosphorus (P) loading is inactivation of P by aluminum (Al). After addition of Al to lake water an Al(OH)₃ floc is formed, which settles to the bottom and initially form a lid on the sediment surface. The effects of Chironomus plumosus larvae on sediment nutrient fluxes and P binding-sites in the sediment after addition of Al were tested. C. plumosus larvae were added to sediment cores in which sediment–water fluxes of nutrients were measured four times. After one month, the sediment was sectioned with depth and P fractions were measured by sequential chemical extraction. The chironomids created burrows through the Al layer which caused a significantly increased efflux of P from the Al treated sediment, because the P had only limited contact to the added Al. The chironomids also affected the P fractions in the sediment by their bioturbating activity. Thus, they caused increased Al concentrations in the upper part of the Al treated sediment. This created an enhanced contact between Al and P in the upper 7 cm of the sediment and, as a result, an increased binding of P to Al and a lowered porewater P. The DIP efflux is therefore expected to be lowered after the initial phase. Al had no effects on the nitrogen fluxes, but the chironomids enhanced the release, and decreased the release or increased the uptake by the sediments.