Identification of black plastics realized with the aid of Raman spectroscopy and fuzzy radial basis function neural networks classifier

To accomplish the effective classifier and secure the accurate classification capabilities of black plastics, a comprehensive design methodology of fuzzy radial basis function neural networks is developed with the aid of principal component analysis and particle swarm optimization. Plastics recycling is the competitive method which can deal with the shortage of natural resource. To recycle and reuse the waste plastics, this study is given as the key issue to identify and classify waste plastics by resin type such as polyethylene terephthalate, polypropylene, polystyrene, etc. To complement the weak points of recognition and classification of the near-infrared radiation equipment, Raman spectroscopy is used to obtain qualitative as well as quantitative analysis of black plastics. To improve the identification performance of black plastics, an intelligent computing algorithm such as fuzzy radial basis function neural networks classifier and preprocessing algorithm as principal component analysis are applied to analyze and classify the obtained spectrum of black plastics. Finally, to optimize the structure as well as parameters of fuzzy radial basis function neural networks, particle swarm optimization technique is used. The obtained experimental results show that the proposed network architecture exhibits high classification capabilities in practical applications.     

泡沫镍负载TiO2电极光电催化降解废水中的农药敌百虫

采用溶胶-凝胶法制备泡沫镍负载TiO2电极,并用场发射扫描电子显微镜和XRD仪对其表面形貌、颗粒大小和晶体结构进行表征.以紫外灯为光源,负载TiO2的泡沫镍电极为阳极,Pt电极为阴极,建立光电催化体系,对废水中的农药敌百虫进行降解.当采用浓度0.02 mol/L的NaCl溶液为电解质溶液、初始废水pH为6.0、电流密度为2.5 mA/cm2、降解时间为120 min时进行光电催化反应,模拟敌百虫废水COD的去除率达到81.8％.     

The evolution of food donation with respect to waste prevention

The donation of food which is still edible can be seen as a specific application of urban mining as food is recovered for its original purpose – human intake. There are several projects implemented worldwide but due to a lack of data, scientific literature about the topic is rare. This paper summarises briefly the evolution of food donation activities and gives information on the differences and similarities of current organisations distributing food to people in need as well as the political, legal, social and logistical barriers and incentives which occur with respect to this topic. A concept for a food donation network is presented and impact on ecology, economy and society is discussed.     

International aspects of recycling of electrical and electronic equipment: material circulation in the East Asian region

This article examines the present circumstances of recycling of end-of-life electrical and electronic equipment discarded in Japan from the domestic and international viewpoints of material circulation. It is pointed out that some of the discarded items are absorbed into an invisible flow by informal economic activities, being exported in the form of secondhand equipment and secondary materials. Since the equipment has a pollution potential as well as a resource potential, it is anticipated that the pollution potential may possibly be realized if the equipment is mishandled at recycling plants in developing countries. To reduce the invisible flow as much as possible and to reduce the pollution potential from diffusion in developing countries, a policy tool such as extended producer responsibility should be applied to retailers of the equipment, as well as to producers.     

校园再生水回用工程设计

采用A2/O及深度处理工艺处理校园生活污水,再生水回用于校园人工湖补水和杂用。工程造价少,运行费低,运行出水同时达到景观用水和杂用水水质标准。     

Numerical study of heat transfer characteristics of char from waste tire pyrolysis

To investigate heat transfer of char from waste tire pyrolysis, the cooling of char was simulated by the computational fluid dynamics. To scrutinize the heat transfer characteristics, bed height, temperature of cooling wall, and mixing time were selected as calculation parameters. From the results, increasing the char bed height from 0.005 to 0.02 m, the total heat transfer is decreased as from 45.5 to 26.5 J. As the char bed height is further increased from 0.02 to 0.06 m, the total heat transfer is decreased from 26.5 to 9.1 J. The char bed height affects the total heat transfer significantly. The total heat transfer decreases from 15.9 to 14.0 J as the temperature of cooling wall increases from 273.15 to 323.15 K. The total heat transfer mildly depends on the temperature of cooling wall. The particle mixing time increases from 10 to 120 s and the total heat transfer decreases from 28.6 to 22.6 J. It is noted that the particle contact is enhanced between char particles as well as the particles and cooling wall as the particle mixing time decreases. Consequently, heat transfer is augmented.     

天然膨润土还原吸附Cr（Ⅵ）

以天然膨润土为吸附剂,还原吸附处理含Cr（Ⅵ）模拟废水。实验结果表明：以（NH₄）₂FeSO₄为还原剂吸附效果最佳;在还原剂加入量为理论值的0.8倍、膨润土加入量为6 g/L、吸附时间为30 min、吸附温度为30 ℃、初始Cr（Ⅵ）质量浓度为1 mg/L的条件下,Cr（Ⅵ）去除率可达99.6%,处理后模拟废水中总铬质量浓度低至0.003 mg/L。天然膨润土对Cr（Ⅵ）的还原吸附符合准二级动力学模型及Freundlich等温吸附模型。     

Combined incineration of industrial wastes with in-plant residues in fluidized-bed utility boilers--decision relevant factors.

In Austria more than 50% of the high-calorific industrial residues and wastes generated are utilized for energy recovery in industrial utility boilers. This study investigated full-scale trials of combined incineration of in-plant residues with various industrial wastes. These trials were carried out in order to learn how the alternatively used fuel influences the incineration process itself as well as the quantity and quality of the various incineration products. The currently used fuel, which consisted of in-plant residues as well as externally acquired waste wood and the refuse-derived fuel (RDF) mixtures used during the full-scale trials are characterized in terms of material composition as well as chemical and physical parameters. An input-output mass balance for the incineration plant (two fluidized bed combustion units, 20 and 30 MW, respectively) has been established, based on the data collected during the full-scale incineration trials. Furthermore, pollutant concentrations in the off-gas as well as the solid incineration residue are reported. It is not only the pollutant content but also a variety of other internal as well as external factors that have to be considered if a company is to decide whether or not to thermally utilize specific waste types. Therefore a strengths and weaknesses profile for several types of waste and the specific industrial boiler is also presented.     

海上含油钻屑的热解析除油处理

采用间接加热的热解析技术对海上油田含油钻屑进行处理,考察了热解析处理的效果和影响因素。实验结果表明：在热解析主温度为410.0 ℃下对含油率为14.00%~23.60%（w）的钻屑进行热解析处理,处理后钻屑的石油烃含量低至0.07%;为达到处理后钻屑含油率低于1%的要求,处理速率最高可达2.47 t/h;回收油的主要烃类化合物组成与岩屑油一致,可用于泥浆复配;冷凝回收水的COD及石油类物质超标,处理后可作为循环冷却水的补充水;外排气体的污染物指标达到国家排放标准;该套实验装置处理含油率为14.00%~23.60%的钻屑,柴油消耗量小于15 L/t、电能消耗量小于9 kW·h/t。     

乳状液膜法处理煤制兰炭废水

以磷酸三丁酯(TBP)为载体、煤油为膜溶剂、NaOH水溶液为内水相,采用乳状液膜法处理兰炭废水。实验结果表明:当TBP体积分数为4%、表面活性剂质量分数为4%、内水相NaOH质量分数为12%、油内比(乳状液的油相与内水相的体积比)为3∶2、乳水比为1∶5、萃取时间为15min时,废水中的酚类(以苯酚计)去除率达到85%以上,COD去除率达83%以上。     

钛基IrO2-RuO2阳极电解处理亚甲基蓝溶液

采用钛基IrO2-RuO2为阳极材料,不锈钢为阴极材料,NaCl质量浓度为10 g/L的溶液为电解液,对亚甲基蓝溶液进行电化学处理。实验结果表明:处理初始质量浓度为25 mg/L的亚甲基蓝溶液,电解电流0.050 A,电解20 min后亚甲基蓝去除率达95%;处理初始质量浓度为100 mg/L的亚甲基蓝溶液,电解电流0.100 A,电解30 min后亚甲基蓝去除率达98%。随着电解时间和电解电流的增加,亚甲基蓝去除率均增大。     

主汽管噪声原因分析及处理对策

随着环保要求的日益严格，工业噪声作为一大污染源越来越受到人们的关注。通过对噪声产生机理的分析，确定了主汽管噪声的生成原因，介绍了几种降噪措施及其效果，对电厂管道设计和阀门选型具有借鉴意义。     

Use of fly ash for the removal of phenol and its analogues from contaminated water

This work attempts to elucidate the effects of different operational variables affecting the mechanistic function of fly ash for removal of some priority organic pollutants viz. phenol and its analogues. Thermodynamic parameters like free energy change, enthalpy and entropy of the process, as well as the sorption isotherms for phenols on fly ash, were measured and the most suitable isotherm was determined. Results of the study indicate that the extent of solute removal is determined by the initial solute concentration, molecular size and molecular arrangement of the solute. At the fixed set of experimental conditions, a model equation can be developed from which the percent removal corresponding to the load of the particular solute is determined. It is assumed that the mechanism of adsorption is governed by the surface characteristics of fly ash; pH has a vital role in influencing the solute removal as both the ionizing power (acidity, pKa) of the solutes and the zero point charge of fly ash (pH(ZPC)) depend on the solution pH. Isotherm pattern and the free energy change indicate that the process is favorable, as well as spontaneous. The information gathered from the study will serve as a predictive modeling procedure for the analysis and design of the removal of organic pollutants and decontamination of water. The leaching experiment indicates that the retained solutes do not release from fly ash. The retained solutes can be recovered and utilized as industrial raw material.     

Improving sustainable recovery of metals from waste printed circuit boards by the primary copper smelter process

In this paper, utilizing the existing primary copper smelter process for the recovery of metals from waste printed circuit boards (PCBs) is proposed as an alternative to the current backyard operations in developing countries. The Model for Evaluating Metal Recycling Efficiency from Complex Scraps (MEMRECS) concept is introduced as a tool for the evaluation of the eco-efficiency of metals recovery from waste PCBs. Based on the MEMRECS approach, the relative contribution of every metal fraction to the recyclability of the whole product is estimated. Thereby, gold content is identified as a key factor strongly influencing the efficiency of metals recovery from waste PCBs. Furthermore, it could be used as an indicator for the categorization of waste PCBs before feeding them into the recycling process. Finally, an integrated process is proposed to optimize the eco-efficiency of metals recovery from waste PCBs in developing countries.     

Economic potential of recycling business in Lahore, Pakistan

The state of household waste recycling in Lahore city, Pakistan with a population of 7.2 million was analyzed. Data on solid waste recycling were gathered from residents of low-, middle- and high-income groups, as well as from scavengers and junkshops. The recycling activities in Lahore exert a significant impact on resource conservation, creation of jobs, provision of economic opportunity and reduction in the magnitude of waste disposal problems. A cost analysis is presented to show the income that can be generated through a well-planned recycling program. It is shown that 21.2% of all recyclable waste in Lahore is recycled, and it generates an amount of Rs. 271 million (US dollars 4.5 million) per year through the informal sector. However, if the recycling practice is owned by the formal sector, it can save an amount of Rs. 65 million by reducing the collection cost. If recycling is adopted as an industry, it can generate revenues of Rs. 530 million (US dollars 8.8 million) per year and can also save enormous amount of energy, as well as the natural resources.     

Heavy metals fractionation before, during and after composting of sewage sludge with natural zeolite

The main limiting factor, in order to use compost in agriculture, is the total concentration of heavy metals. Natural zeolites, such as clinoptilolite, have the ability to take up and remove those metals by utilizing ion exchange. However, it is important to know about the fractionation of the heavy metals during the thermophilic phase and the maturation phase. The purpose of this work was to determine the changes in the fraction of heavy metals in sewage sludge compost in which clinoptilolite is used as a bulking agent to remove metals. The final result indicates that a significant (p < 0.05) percentage of the metals, which is not removed by the zeolite, is associated with the residual fraction which is considered as an inert form.     

Soluble salt removal from MSWI fly ash and its stabilization for safer disposal and recovery as road basement material

Fly ash from municipal solid waste incinerators (MSWI) is classified as hazardous in the European Waste Catalogue. Proper stabilization processes should be required before any management option is put into practice. Due to the inorganic nature of MSWI fly ash, cementitious stabilization processes are worthy of consideration. However, the effectiveness of such processes can be severely compromised by the high content of soluble chlorides and sulphates. In this paper, a preliminary washing treatment has been optimized to remove as much as possible soluble salts by employing as little as possible water. Two different operating conditions (single-step and two-step) have been developed to this scope. Furthermore, it has been demonstrated that stabilized systems containing 20% of binder are suitable for safer disposal as well as for material recovery in the field of road basement (cement bound granular material layer). Three commercially available cements (pozzolanic, limestone and slag) have been employed as binders.     

Optimizing the APC residue washing process to minimize the release of chloride and heavy metals

An optimization of the air pollution control (APC) residue washing process was carried out to minimize the release of chloride and heavy metals. Taking into account economic parameters such as the consumption of water and reaction time, the best relation found was a S/L ratio of 1/3 during 1 h. At a laboratory scale and according to the values obtained for chloride and heavy metals, the APC residue is classified as non-special according to Catalonian Regulations (Spain). Moreover, the pH of the solution, when MgSO(4) is added during the washing process, may be controlled by the formation of gypsum. In these conditions, the concentration of heavy metals will decrease as a consequence of the formation of their respective insoluble hydroxides. Therefore, the counter-current batch washing process with the addition of small amounts of MgSO(4) is revealed as an economically feasible treatment of the APC residue. This washed residue is ready to be used as secondary material or to be landfilled safely.     

Impact of using high-density polyethylene geomembrane layer as landfill intermediate cover on landfill gas extraction

Clay is widely used as a traditional cover material for landfills. As clay becomes increasingly costly and scarce, and it also reduces the storage capacity of landfills, alternative materials with low hydraulic conductivity are employed. In developing countries such as China, landfill gas (LFG) is usually extracted for utilization during filling stage, therefore, the intermediate covering system is an important part in a landfill. In this study, a field test of LFG extraction was implemented under the condition of using high-density polyethylene (HDPE) geomembrane layer as the only intermediate cover on the landfill. Results showed that after welding the HDPE geomembranes together to form a whole airtight layer upon a larger area of landfill, the gas flow in the general pipe increased 25% comparing with the design that the HDPE geomembranes were not welded together, which means that the gas extraction ability improved. However as the heat isolation capacity of the HDPE geomembrane layer is low, the gas generation ability of a shallow landfill is likely to be weakened in cold weather. Although using HDPE geomembrane layer as intermediate cover is acceptable in practice, the management and maintenance of it needs to be investigated in order to guarantee its effective operation for a long term.     

高Ca~(2+)浓度CO_2沉淀法由电石渣制备纳米CaCO_3

以NH4Cl溶液为浸取剂、CO2为碳化剂、多聚磷酸钠(STP)为添加剂,由电石渣制备纳米Ca CO3。实验结果表明:电石渣浸取液Ca2+浓度为1.0 mol/L、STP加入量为3.00%时,可制备出粒径为30~60 nm的纳米Ca CO3;STP可有效控制纳米Ca CO3的粒度和形貌;在最佳工艺条件下,由电石渣制备纳米Ca CO3的产率为80%,处理1 t电石渣产生的经济效益约为2 670元。