Utility of risk-time curves in selecting remediation alternatives

The basis for risk-time curves associated with remediation of hazardous waste sites is developed. The utility of the risk-time curves as a part of a methodology for selecting between alternative remediation schemes is demonstrated when the time-frames for remediation are different for different alternatives. The potential for inclusion of uncertainty aspects in risk-time curves is considered.     

Ammonia Removal from Saline Wastewater by Ion Exchange

Ion exchange materials that are highly selective for ammonia have been used for wastewater treatment but they are mainly suitable for use in non-saline water. In this paper, some new materials have been evaluated for the selective uptake of ammonia from saline wastewater. Those materials include: MN 500 (belongs to the group of material known as Macronets which are hypercrosslinked polyvinyl styrenes) as well as some chemically modified zeolites and products of zeolite nature. Equilibrium isotherms for ammonium ion uptake determined in a series of shake flask experiments using materials exposed to varying concentrations of ammonium ion in artificial seawater are shown. Capacity and selectivity data for these materials for ammonium ion are also presented.     

CO2资源化利用的现状及前景

介绍了CO2分离捕集最新工艺——电化学法、膜法、化学循环燃烧法的研究进展。评述分析了CO2的各种资源化应用前景：CO2气体用作生物碳源、辅助注射成型剂及有机物（如氨基甲酸酯、表面活性剂）合成原料等;液态CO2用于人造金刚石、热泵干燥、超临界CO2萃取及固体干冰冷喷射清洗等。CO2作为一种潜在的丰富碳源,应不断研发其新的应用领域,加快其工业化应用。     

Siting MSW landfill using weighted linear combination and analytical hierarchy process (AHP) methodology in GIS environment (case study: Karaj)

Selection of landfill site is a complex process and needs many diverse criteria. The purpose of this paper is to evaluate the suitability of the studied site as landfill for MSW in Karaj. Using weighted linear combination (WLC) method and spatial cluster analysis (SCA), suitable sites for allocation of landfill for a 20-year period were identified. For analyzing spatial auto-correlation of the land suitability map layer (LSML), Maron’s I was used. Finally, using the analytical hierarchy process (AHP), the most preferred alternative for the landfill siting was identified. Main advantages of AHP are: relative ease of handling multiple criteria, easy to understand and effective handling of both qualitative and quantitative data.As a result, 6% of the study area is suitable for landfill siting and third alternative was identified as the most preferred for siting MSW landfill by AHP.The ranking of alternatives were obtained only by applying the WLC approach showed different results from the AHP. The WLC should be used only for the identification of alternatives and the AHP is used for prioritization. We suggest the employed procedure for other similar regions.     

Acidic bioleaching of heavy metals from sewage sludge

The overall objective of this study was to evaluate the use of controlled bio-acidification prior to land application as a decontamination process to remove heavy metals from sludge. The sulfur-oxidizing bacteria were naturally available in the sludge samples and were activated by providing sulfur and aeration at 28°C–30°C. Activation resulted in bio-acidification to pH 2 within 5–11 days. Successive inoculation of fresh sludges with 5% acidified samples reduced the acidification time to 2–3 days in most samples. Bio-acidification resulted in dissolving significant quantities of heavy metals from all sludge types tested. The maximum solubilization results were: 86%–97% for Ni; 48%–98% for Pb; 26%–71% for Cr; 18%–91% for Zn; 16%–90% for Cu; 7%–60% for Cd. Limited metal solubilization results were observed in the various control samples that accompanied the bio-acidified samples. The leaching results in the control samples were limited to 2%–19% for Ni, 0%–7% for Pb, 0%–5% for Cr, 0.3%–4% for Zn, 0.2%–4% for Cu and 0%–3% for Cd. The results confirmed that Ni and Pb were the easiest metals to dissolve from the various sludge types. On the other hand, the lowest solubilization results were observed for Cu and Cd, and moderate solubilization results were achieved for Cr. The bio-acidification process resulted in moderate gains in terms of improving the suitability of tested sludges for land application. Received: April 19, 1999 / Accepted: November 4, 1999     

Literature review: Electrodialytic remediation and potential environmental applications of oil fly ash

Oil fly ash (OFA) contains environmentally toxic heavy metal and substituted polycyclic aromatic hydrocarbons. This review discusses the physical and chemical properties of OFA and presents information from other types of fly ash that can be used as concepts for the remediation and uses of OFA. Electrokinetic remediation is useful to remove some of the heavy metals for broader uses of the fly ash in agriculture, for making construction material, for contaminated wastewater treatment, and also for carbon dioxide sequestration. This review can be useful to develop approaches for the remediation and environmental management of OFA. © 2012 Wiley Periodicals, Inc.     

Test methods for assessing the biological stability of biodegradable waste

This paper presents some results of investigations for the characterization of waste excavated from closed landfills and of waste sampled during mechanical-biological pretreatment before disposal in landfill. The results reported are those obtained with the tests carried out for the assessment of the biological stability of the waste. Some of the considered tests, such as the ones for the determination of the respiration activity and the biogas production, are well known and have been applied for years; other tests, such as the ones for the determination of BOD5 and COD in leaching test eluate and of the black index, are among the tests considered by the international research community for possible utilization for the evaluation of waste biological stability. Good correlations were found for most of the results obtained, proving the reliability of the test methods used. In particular, the effectiveness of biodegradation during waste pretreatment processes can be easily monitored by measuring the respiration index and/or the BOD5 and COD in leaching test eluate; for the characterization of waste from landfills, the use of respiration index can be recommended. In both cases the COD in leaching test eluate may provide additional useful information especially in the case of low values for the respiration index. Moreover, the black index test may be considered with some limits that will be discussed, providing good results in a simple and cost effective way.     

Comparison of selected aerobic and anaerobic procedures for MSW treatment

This paper considers selected efficiency rates and process data of aerobic and anaerobic procedures for the treatment of municipal solid waste and residual waste. Data are exclusively related to mechanical-biological treatment (MBT) procedures for generating waste appropriate for landfilling. The following aspects are regarded: general framework conditions for the application of MBT, efficiency of decomposition and of stabilisation, air and water emissions and energy balances. The presented data can be used for more efficient planning. In comparison to aerobic processes, anaerobic digestion can be ecologically advantageous, particularly with regard to exhaust emissions and energy balances. On the other hand, the wastewater emissions and the wastewater treatment required must be regarded as disadvantageous. Due to the relatively short period of operational history of most anaerobic processes for mechanical-biological waste treatment and thus limited experiences, operational reliability of anaerobic processes is slightly lower. Extensive biological stability of the treated waste for low-emission disposal cannot be reached by anaerobic digestion alone, but only in combination with additional aerobic post-treatment. In connection with the utilisation of renewable energies and the rising relevancy of climate protection, it can be affirmed that anaerobic digestion for the treatment of municipal solid waste has a high potential for further development.     

The origins of municipal solid waste: The relations between residues from packaging materials and food

Data for the composition of municipal solid waste (MSW) from around the world are used to further examine a previously reported statistical correlation between the fraction of food residues and the fractions of paper and board, metal, glass and plastics residues in MSW. For data from many locations, these correlations are statistically significant; multiple linear regressions are computed. The fraction of food waste decreases as the fractions of waste from paper and board, metals and glass increase.The situation in the U.S.A. is examined further for just packaging waste. Similar correlations are established for the fraction of food residues and the fractions of paper and board and plastics packaging residues for predicted compositions for 1980 to 2000. Similar correlations for the U.K. are not statistically significant. Some reasons for this are postulated.The results of the statistical analyses predict that a strategy for decreasing the fraction of food waste in MSW is to increase the use of food packaging by some amount, especially plastics and metals, contrary to conventional wisdom.     

Evaluation of leaching and extraction procedures for soil and waste

Laboratory leaching tests may be used for source term determination as a basis for risk assessment for soil-groundwater pathways on contaminated sites. In order to evaluate different leaching procedures, batch extraction tests and percolation tests were performed using three reference materials produced from contaminated soil, demolition waste and municipal solid waste incinerator bottom ash. Emphasis was placed on the investigation of the leachability of the heavy metals copper and chromium, polycyclic aromatic hydrocarbons (PAHs) and the anions chloride and sulfate. Significant discrepancies between column experiments and batch/extraction tests were found for the release of PAHs and to a lesser extent for the heavy metals Cu and Cr. Additionally interlaboratory comparisons were conducted based on different leaching tests with the reference materials and evaluated using the criteria of comparability and reproducibility. The best reproducibility was achieved for all investigated substances in column tests. The reproducibility of batch tests was acceptable except for PAHs. The results from the experimental work will help establish standardized and feasible laboratory procedures as fundamental for substance specific risk assessment of contaminated sites.     

Update of Comparative Occurrence Rates for Offshore Oil Spills

Estimates of occurrence rates for offshore oil spills are useful for analyzing potential oil-spill impacts and for oil-spill response contingency planning. With the implementation of the Oil Pollution Act of 1990 (US Public Law 101-380, August 18, 1990), estimates of oil-spill occurrence became even more important to natural resource trustees and to responsible parties involved in oil and gas activities.Oil-spill occurrence rate estimates have been revised based on US Outer Continental Shelf (US OCS) platform and pipeline spill data (1964 through 1999), worldwide tanker spill data (1974 through 1999), and barge spill data for US waters (1974–1999). These spill rates are expressed and normalized in terms of number of spills per volume of crude oil handled. All estimates of spill occurrence rates were restricted to spills greater than or equal to 1000 barrels (159 m³, 159 kl, 136 metric tonnes, 42,000 US gallons).The revisions compared to the previously published rates calculated through 1992 (Anderson and LaBelle, 1994) indicate that estimates for the US OCS platform spill occurrence rates continue to decline, primarily because no spills have occurred since 1980. The US OCS pipeline spill occurrence rates for spills greater than or equal to 1000 barrels remained essentially unchanged. However, the rate for larger OCS pipeline spills (greater than or equal to 10,000 barrels) has decreased significantly. Worldwide tanker spill rates, rates for tanker spills in US waters, and rates for barge spills in US waters decreased significantly. The most recent 15-year estimates for 1985–1999 (compared to rates for the entire data series) showed that rates for US OCS platforms, tankers, and barges continued to decline.     

Depollution benchmarks for capacitors,batteries and printed wiring boards from waste electrical and electronic equipment (WEEE)

The article compiles and analyses sample data for toxic components removed from waste electronic and electrical equipment (WEEE) from more than 30 recycling companies in Switzerland over the past ten years. According to European and Swiss legislation, toxic components like batteries, capacitors and printed wiring boards have to be removed from WEEE. The control bodies of the Swiss take back schemes have been monitoring the activities of WEEE recyclers in Switzerland for about 15 years. All recyclers have to provide annual mass balance data for every year of operation. From this data, percentage shares of removed batteries and capacitors are calculated in relation to the amount of each respective WEEE category treated. A rationale is developed, why such an indicator should not be calculated for printed wiring boards. The distributions of these de-pollution indicators are analysed and their suitability for defining lower threshold values and benchmarks for the depollution of WEEE is discussed. Recommendations for benchmarks and threshold values for the removal of capacitors and batteries are given.     

Probabilistic approach for estimating the release of contaminants under field management scenarios

A probabilistic approach is presented for estimating the release of contaminants by leaching, when wastes are being considered for disposal in a class of landfills but the specific landfill disposal site is uncertain. A simple percolation and equilibrium-based release model is used in conjunction with laboratory testing results and observations of field leachate characteristics for municipal solid waste landfills, hazardous waste landfills and industrial co-disposal landfills. The approach is applied for assessing the efficacy of potential treatment processes for mercury contaminated soils. For each landfill scenario, historical values of leachate pH and annual leachate generation quantities were used to derive the probability distribution functions of the field pH and LS ratio that may be expected to contact the disposed material over an estimated time period of 100 years. For each potential treatment process, laboratory testing was used to establish the treated material's leaching characteristics as a function of pH LS ratio. This approach allowed determination of distribution frequencies and limit values for release estimates instead of single point estimates. The probability of the mass of a constituent of interest released exceeding a hypothetical threshold was examined for each treatment process and landfill system. Results of the probabilistic analysis allowed for integration of a range of data and provided a good basis for assessing the efficacy of the examined treatment processes over the three assumed disposal scenarios.     

An analysis of a European hazardous waste transport registration system (EARS)

In this study a system analysis is presented for a European registration system for hazardous waste shipment notifications. The administrative procedures for the notifications according to the European Community (EC) directives are in use in several Member States, among others the Netherlands and Belgium. The new system should enable efficient notification procedures, without the large number of forms and the delays in obtaining transit and import permissions that are currently observed. Only one form is needed for each hazardous waste transport within the EC, accompanying the transport.The system also allows the generation of compiled information for all EC Member States by using a database structure. Rather than manually administrating the information of the forms, this information is transmitted and stored electronically. With an estimated number of 100,000 transfrontier transports of hazardous waste per year in the European Community, this greatly decreases time and costs for aggregating hazardous waste transport data. This aggregated information is necessary for the implementation, evaluation and further development of a coherent EC waste management policy for hazardous waste treatment and disposal.     

Deposition Loads of Sulphur and Nitrogen in Germany

High spatial resolution maps of deposition loads in Germanyare produced as an input for abatement strategy research andfor critical loads exceedance calculations on a nationalscale. In this paper methods ofmapping total deposition loads in Germany and preliminarymaps of nitrogen and sulphur deposition loads for the year1993 are presented. A comparison of these mapping resultswith EMEP deposition mapping results has been carried out.The differences in the results of the German national and theEuropean EMEP mapping, due to different databases anddifferent methods, are quantified and discussed. Highresolution maps of deposition loads are compared to Europeanlow resolution maps on the same temporal and spatial scale,assuming that on average both should lead to similar results.However, the average differencescalculated for 23 EMEP 150 × 150 km² grid cells over Germanywere found to be 33% higher for sulphur (S) total depositionby the German method 65% higher for S dry deposition and1% lower for S wet deposition. The German results fornitrogen (N) total deposition are 2% higher than the EMEPresult 22% higher for N dry deposition and 10% lower for Nwet deposition.     

Ten Year Historical Perspective of the NOAA Damage Assessment and Restoration Program

The United States Oil Pollution Act of 1990 (OPA) was enacted to reduce the probability of oil spills in U.S. waters. A key provision of the legislation enables recovery of damages for restoration of injured natural resources and lost services due to oil spills. The National Oceanic and Atmospheric Administration (NOAA) developed regulations that set out a process for determining the appropriate type and scale of restoration actions to accomplish this goal. The restoration plan developed through this process is the basis for an economic claim for natural resource damages. The regulations recognize that various methods, including environmental models, may be used in identifying and quantifying injuries to natural resources and losses of their services and in developing a restoration approach for these injuries. Rather than designating particular assessment measures, NOAA requires each trustee to decide which methodologies are appropriate for each incident, given its particular facts and circumstances. Any procedure chosen must meet the standards in the rule: it must provide information useful for determining restoration needed for an incident, the cost of the method must be commensurate with the quality and quantity of information it is expected to generate, and, of particular significance here, the method must be reliable and valid for the particular incident. This paper describes how methods are selected, how they might be used, and what legal standards would be applied should these methods be used as evidence in litigation.     

Second Phase Evaluation of a Protocol for Testing a Fire Resistant Oil Spill Containment Boom

Most response plans for in situ burning of oil at sea call for the use of a fire-resistant boom to contain the oil during a burn. Presently, there is no standard method for the user of fire-resistant boom to evaluate the anticipated performance of different booms. The American Standard for Testing Materials (ASTM) F-20 Committee has developed a draft standard, `Standard Guide for in situ Burning of Oil Spills on Water: Fire-Resistant Containment Boom'; however, the draft provides only general guidelines and does not specify the details of the test procedure. Utilizing the guidelines in the draft standard, a second series of experiments was conducted to evaluate a protocol for testing the ability of fire-resistant booms to withstand both fire and waves.     

固相萃取—微波衍生化—GC-MS法同时测定水中6种雌激素物质

建立了固相萃取—微波衍生化—气相色谱-质谱联用法快速同时测定水中雌酮（E1）、17α-雌二醇（α-E2）、17β-雌二醇（β-E2）、雌三醇（E3）、17α-乙炔基雌二醇（EE2）、双酚A（BPA）等6种雌激素物质的分析方法,对色谱柱升温程序、固相萃取及衍生化条件进行了优化。色谱柱最佳升温程序为：初始温度50 ℃,保持2 min;以20 ℃/min速率升至260 ℃,保持5 min;最后以10 ℃/min速率升至280 ℃,保持5 min。实验结果表明,在选取 HC-C18萃取小柱、添加双（三甲基硅烷基）三氟乙酰胺（BSTFA）+1%三甲基氯硅烷（TMCS）+吡啶作为衍生化试剂、微波315 W衍生化加热4 min的条件下,6种目标物标准曲线的相关系数均大于0.999,BPA、E1、EE2及E3的线性范围为3~300 ng/L,17α-E2及17β-E2的线性范围为5~300 ng/L,方法检出限为2.0~5.0 ng/L,加标回收率为76.45%~96.24%。