共查询到20条相似文献,搜索用时 140 毫秒
1.
In this study, spent compact fluorescent lamps were characterized to determine the distribution of mercury. The procedure used in this research allowed mercury to be extracted in the vapor phase, from the phosphor powder, and the glass matrix. Mercury concentration in the three phases was determined by the method known as cold vapor atomic absorption spectrometry. Median values obtained in the study showed that a compact fluorescent lamp contained 24.52±0.4ppb of mercury in the vapor phase, 204.16±8.9ppb of mercury in the phosphor powder, and 18.74±0.5ppb of mercury in the glass matrix. There are differences in mercury concentration between the lamps since the year of manufacture or the hours of operation affect both mercury content and its distribution. The 85.76% of the mercury introduced into a compact fluorescent lamp becomes a component of the phosphor powder, while more than 13.66% is diffused through the glass matrix. By washing and eliminating all phosphor powder attached to the glass surface it is possible to classified the glass as a non-hazardous waste. 相似文献
2.
De Michelis I Ferella F Varelli EF Vegliò F 《Waste management (New York, N.Y.)》2011,31(12):2559-2568
The paper deals with recovery of yttrium from fluorescent powder coming from dismantling of spent fluorescent tubes. Metals are leached by using different acids (nitric, hydrochloric and sulphuric) and ammonia in different leaching tests. These tests show that ammonia is not suitable to recover yttrium, whereas HNO(3) produces toxic vapours. A full factorial design is carried out with HCl and H(2)SO(4) to evaluate the influence of operating factors. HCl and H(2)SO(4) leaching systems give similar results in terms of yttrium extraction yield, but the last one allows to reduce calcium extraction with subsequent advantage during recovery of yttrium compounds in the downstream. The greatest extraction of yttrium is obtained by 20% w/v S/L ratio, 4N H(2)SO(4) concentration and 90°C. Yttrium and calcium yields are nearly 85% and 5%, respectively. The analysis of variance shows that acid concentration alone and interaction between acid and pulp density have a significant positive effect on yttrium solubilization for both HCl and H(2)SO(4) medium. Two models are empirically developed to estimate yttrium and calcium concentration during leaching. Precipitation tests demonstrate that at least the stoichiometric amount of oxalic acid is necessary to recover yttrium efficiently and a pure yttrium oxalate n-hydrate can be produced (99% grade). The process is economically feasible if other components of the fluorescent lamps (glass, ferrous and non-ferrous scraps) are recovered after the equipment dismantling and valorized, besides the cost that is usually paid to recycling companies for collection, treatment or final disposal of such fluorescent powders. 相似文献
3.
In this work, mercury speciation in phosphorus powder matrices and soda lime glass waste from new and spent fluorescent lamp wastes has been studied by thermo-desorption/atomic absorption spectrometry (TDAAS), X-ray diffraction (XRD), cold vapor-atomic absorption (CV-AAS) and atomic emission spectrometry/inductively coupled plasma (ICP/AES). TDAAS results show the presence of oxidized forms of mercury, i.e., Hg(1+) and Hg(2+), especially in wastes with high mercury concentration. Such forms are mobile, and therefore represent a potential hazard waste material. Glass TD profiles of spent fluorescent lamps suggested the presence of mercury strongly linked to the matrix, which desorbs only at high temperatures. 相似文献
4.
Oriental lacquer film was prepared and exposed to a fluorescent lamp. The color difference and gloss of the surface of the film decreased compared to those of film kept in a dark place by irradiation with the fluorescent light. The percentage of discoloration was 7.0% on a relative scale with an irradiation of 3600 h. The surface of the film was characterized by X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The oxygen content of the surface increased considerably with the decrease in triene groups with exposure time. These changes were also observed when the film was exposed in a glass or acrylic plate box. The change of the above properties was not observed when the film was kept in a dark place for more than 4800 h. The results suggest that oriental lacquer film deteriorates even under irradiation with visible light. 相似文献
5.
Yufeng Wu Baolei Wang Qijun Zhang Ruiqing Li Chenghua Sun Wei Wang 《Journal of Material Cycles and Waste Management》2014,16(4):635-641
In this paper, an efficient recovery of rare earth elements from waste fluorescent phosphors has been reported and the novel process of alkali fusion and acid leaching has been proposed. The experimental results have shown that the key for efficient recycling is the complete dissolution of waste fluorescent phosphors. The Na2O2-to-waste mass ratio, calcination temperature and reactive time play considerable roles in rare earth elements extraction during the alkali fusion process. The optimal conditions in terms of temperature, time and Na2O2-to-waste mass ratio are 650 °C, 15 min and 2:1, respectively, under which more than 99.5 % rare earth elements are extracted. The possible reaction mechanism of alkali fusion has been proposed. 相似文献
6.
对某腈纶污水处理厂的现有处理工艺进行了评估,考察了污染物的转化规律。结果表明,经一级生化处理后,废水中的COD、TOC和BOD5去除率分别为51.1%、32.1%和98.1%,但二级生化处理对COD和TOC的去除没有贡献。一级生化处理过程中氨化作用显著,有机氮逐渐向氨氮和有机胺转化,含氰基的大分子逐渐降解为较小的分子,且可见光区类富里酸荧光物质向类腐殖酸荧光物质、紫外区类富里酸荧光物质转化,同时生化出水中新增溶解性微生物代谢产物。但一级生化出水中碳氮比很低,几乎没有可生化性,导致二级生化处理效果不佳。 相似文献
7.
Thomas Aley 《补救:环境净化治理成本、技术与工艺杂志》2017,27(4):39-46
Groundwater tracing with fluorescent tracer dyes is a valuable tool in many remediation projects. Three of four common dyes can be used concurrently, effectively separated, and their concentrations quantified if modern laboratory instruments and appropriate protocols are used. Unfortunately, investigators often overestimate the amount of introduced dye likely to be detected, use too little dye because of these estimates and concern that colored water might be detectable off‐site, and place sampling reliance solely on grab samples of water. The common result is flawed studies that identify only some of the points to which the dyed water flows. Results are quantitatively compared for monitoring sites during periods where both water samples and granular activated carbon samplers (referred to as carbon samplers) were used. The results demonstrate that carbon samplers are superior to water samples for detecting the presence of the fluorescent tracer dyes evaluated. A technically sound and cost‐effective strategy is to place primary sampling reliance on carbon samplers for detecting the presence of the dyes and secondary reliance on grab samples of water for determining dye concentrations when they are greater than the detection limits. 相似文献
8.
Fluorescent lamps rely on mercury as the source of ultraviolet radiation for the production of visible light. Partitioning of mercury among vapor phase, loose phosphor powders produced during breaking and washing steps, glass matrices, phosphor powders attached on the glass and aluminum end caps was examined from simulated laboratory lamp recycling tests for different types of spent and new fluorescent lamps. Mercury concentrations in lamp glasses taken from commercial lamp recyclers were also analyzed for comparison with the simulated results of spent and new lamps of different types. The mercury content of the glass from spent lamps was highly variable depending on the lamp type and manufacturer; the median values of the mercury concentration in glasses for spent 26- (T8) and 38-mm (T12) diameter fluorescent lamps were approximately 30 and 45 microg/g, respectively. The average mercury concentration of samples taken from recycler A was 29.6 microg/g, which was about 64% of median value measured from the spent T12 lamps. Over 94% of total mercury in lamps remained either as a component of phosphor powders attached inside the lamp or in glass matrices. New T12 lamps had a higher partitioning percentage of elemental mercury in the vapor phase (0.17%) than spent T12 lamps (0.04%), while spent lamps had higher partitioning percentages of mercury resided on end-caps and phosphor powders detached from the breaking and washing steps. The TCLP values of simulated all lamp-glasses and samples obtained from recyclers were higher than the limit of LDR standard (0.025 mg/L). After investigating acid treatment and high temperature treatment as mercury reclamation techniques, it was found that heating provided the most effective mercury capture. Although the initial mercury concentrations of individual sample were different, the mercury concentrations after 1 h exposure at 100 degrees C were below 4 mug/g for all samples (i.e., <1% remaining). Therefore, it is recommended that heating be used for recovering mercury from spent fluorescent lamps. 相似文献
9.
Three fluorescent dye traces were designed by Zapata Incorporated at a large portion of Tinker Air Force Base (AFB) near Oklahoma City, Oklahoma, to replicate the migration of chlorinated ethene plumes from two target source areas and determine if commingling of those plumes has occurred. The target source areas are spatially separated, contributed contaminants into two aquifers, and were to be remediated from two different financial mechanisms. The nature of the shared fiscal responsibility for remediation of the commingled plumes was unclear. Background sampling was performed to verify that the preferred conservative dyes planned for use were suitable for the site. The fluorescent dyes used were fluorescein and eosine. Eosine dye was introduced into two wells in the upper saturated zone (USZ) under Building 3001 in July 2008. Fluorescein dye was introduced into four monitoring wells screened in the lower saturated zone (LSZ) and the lower lower saturated zone (LLSZ) in July 2008 at the industrial wastewater treatment plant. Zapata then conducted a second dye trace using fluorescein dye in a third USZ well to confirm the results of the eosine dye trace in the USZ under Building 3001. © 2010 Wiley Periodicals, Inc. 相似文献
10.
We give an overview of the management systems of household hazardous waste (HHW) in Japan and discuss the management systems
and their risks. To get basic information, we conducted a survey of consumers to discover their behavior and awareness of
HHW items throughout the entire life cycle, which is made up of the purchase, use, and disposal of a product. The results
showed that many people hold end-of-life batteries, fluorescent lamps, empty spray cans, and others in their houses after
use. Also, the results showed that a lot of such waste items were discarded in waste streams different from those stipulated
by local governments. In particular, many people do not remove NiCd batteries inside products such as shavers or cordless
phones before discarding. On the other hand, people’s knowledge of and concern regarding the risks, collection, and recycling
of HHW were high. When information about the risks was specifically presented in the questionnaire, people tended to show
a more positive intention to participate in a collection and recycling system compared to those who were not presented with
such information. Our studies on NiCd batteries and fluorescent lamps showed that it is important to collect and recycle HHW
to control the domestic and international flows of cadmium and mercury. 相似文献
11.
Beolchini F Fonti V Dell'Anno A Rocchetti L Vegliò F 《Waste management (New York, N.Y.)》2012,32(5):949-956
The present work deals with the application of biotechnology for the mobilization of metals from different solid wastes: end of life industrial catalysts, heavy metal contaminated marine sediments and fluorescent powders coming from a cathode ray tube glass recycling process. Performed experiments were aimed at assessing the performance of acidophilic chemoautotrophic Fe/S-oxidizing bacteria for such different solid matrices, also focusing on the effect of solid concentration and of different substrata. The achieved results have evidenced that metal solubilization seems to be strongly influenced by the metal speciation and partitioning in the solid matrix. No biological effect was observed for Ni, Zn, As, Cr mobilization from marine sediments (34%, 44%, 15%, 10% yields, respectively) due to metal partitioning. On the other hand, for spent refinery catalysts (Ni, V, Mo extractions of 83%, 90% and 40%, respectively) and fluorescent powders (Zn and Y extraction of 55% and 70%, respectively), the improvement in metal extraction observed in the presence of a microbial activity confirms the key role of Fe/S oxidizing bacteria and ferrous iron. A negative effect of solid concentration was in general observed on bioleaching performances, due to the toxicity of dissolved metals and/or to the solid organic component. 相似文献
12.
Rabah MA 《Waste management (New York, N.Y.)》2004,24(2):119-126
This study explores a combined pyro-hydrometallurgical method to recover pure aluminium, nickel-copper alloy(s), and some valuable salts from spent fluorescent lamps (SFLs). It also examines the safe recycling of clean glass tubes for the fluorescent lamp industry. Spent lamps were decapped under water containing 35% acetone to achieve safe capture of mercury vapour. Cleaned glass tubes, if broken, were cut using a rotating diamond disc to a standard shorter length. Aluminium and copper-nickel alloys in the separated metallic parts were recovered using suitable flux to decrease metal losses going to slag. Operation variables affecting the quality of the products and the extent of recovery with the suggested method were investigated. Results revealed that total loss in the glass tube recycling operation was 2% of the SFLs. Pure aluminium meeting standard specification DIN 1712 was recovered by melting at 800 degrees C under sodium chloride/carbon flux for 20 min. Standard nickel-copper alloys with less than 0.1% tin were prepared by melting at 1250 degrees C using a sodium borate/carbon flux. De-tinning of the molten nickel-copper alloy was carried out using oxygen gas. Tin in the slag as oxide was recovered by reduction using carbon or hydrogen gas at 650-700 degrees C. Different valuable chloride salts were also obtained in good quality. Further research is recommended on the thermodynamics of nickel-copper recovery, yttrium and europium recovery, and process economics. 相似文献
13.
V. Innocenzi I. De Michelis F. Ferella F. Vegliò 《Waste management (New York, N.Y.)》2013,33(11):2390-2396
In this paper, yttrium recovery from fluorescent powder of lamps and cathode ray tubes (CRTs) is described. The process for treating these materials includes the following: (a) acid leaching, (b) purification of the leach liquors using sodium hydroxide and sodium sulfide, (c) precipitation of yttrium using oxalic acid, and (d) calcinations of oxalates for production of yttrium oxides.Experimental results have shown that process conditions necessary to purify the solutions and recover yttrium strongly depend on composition of the leach liquor, in other words, whether the powder comes from treatment of CRTs or lamp. In the optimal experimental conditions, the recoveries of yttrium oxide are about 95%, 55%, and 65% for CRT, lamps, and CRT/lamp mixture (called MIX) powders, respectively. The lower yields obtained during treatments of MIX and lamp powders are probably due to the co-precipitation of yttrium together with other metals contained in the lamps powder only. Yttrium loss can be reduced to minimum changing the experimental conditions with respect to the case of the CRT process. In any case, the purity of final products from CRT, lamps, and MIX is greater than 95%.Moreover, the possibility to treat simultaneously both CRT and lamp powders is very important and interesting from an industrial point of view since it could be possible to run a single plant treating fluorescent powder coming from two different electronic wastes. 相似文献
14.
Gertjan de Koning Michele Kellerhals Cisca van Meurs Bernard Witholt 《Journal of Polymers and the Environment》1996,4(4):243-252
Poly[(R)-3-hydroxyalkanoates] (PHAs) are biopolymers stored by bacteria, which are currently receiving much attention because of their potential as renewable and biodegradable plastics. Most well-known representatives are poly[(R)-3-hydroxybutyrate] and its copolymers with 3-hydroxyvalerate, which have been commercialized under the trademark Biopol. In addition to these rigid materials, the elastomeric medium-chain length PHAs (mcl-PHAs) produced by fluorescent Pseudomonads are now emerging. The present review aims to survey the important developments concerning research and application prospects of mcl-PHAs. 相似文献
15.
《Waste management & research》1995,13(4):335-342
A video imaging technique is described for the homogeneity assessment of wastes that have been treated by stabilisation/solidification (S/S). The method incorporates a fluorescent tracer into the S/S reagent. A test “waste” consisting of an artificial soil was stabilised/solidified with varying degrees of mixing using Portland cement as the S/S reagent. The tracer distribution was monitored with a video camera, and the cement distribution was determined by chemical analysis for calcium. Measurement of the homogeneity of the products by the video imaging technique gave results comparable to those obtained by the chemical analysis. The results warrant use of the video imaging technique in field applications since it is easier, cheaper and faster than traditional chemical methods. 相似文献
16.
This work investigates the thermal release of mercury from phosphor powder of spent fluorescent lamps. The treatment conditions and the ability of various reducing agents (primarily sodium borohydride) to lower the overall heating temperature required to improve the release of Hg have been evaluated. Hg species in samples were monitored in a thermal desorption atomic absorption spectrometer system, and total mercury was analyzed in a cold vapor atomic absorption spectrometer. Sodium borohydride was the best reducing agent among the ones studied. However, citric acid presented a high capacity to weaken mercury bonds with the matrix. When the sample was crushed with sodium borohydride for 40min in a mass ratio of 10:1 (sample:reducing agent) and submitted to thermal treatment at 300 degrees C for 2h, the concentration of mercury in a phosphor powder sample with 103mgkg(-1) of mercury reached 6.6mgkg(-1). 相似文献
17.
Valentina Innocenzi Ida De Michelis Francesco Ferella Francesca Beolchini Bernd Kopacek Francesco Vegliò 《Waste management (New York, N.Y.)》2013,33(11):2364-2371
This work is focused on the recovery of yttrium and zinc from fluorescent powder of cathode ray tube (CRT). Metals are extracted by sulphuric acid in the presence of hydrogen peroxide. Leaching tests are carried out according to a 22 full factorial plan and the highest extraction yields for yttrium and zinc equal to 100% are observed under the following conditions: 3 M of sulphuric acid, 10% v/v of H2O2 concentrated solution at 30% v/v, 10% w/w pulp density, 70 °C and 3 h of reaction.Two series of precipitation tests for zinc are carried out: a 22 full factorial design and a completely randomized factorial design. In these series the factors investigated are pH of solution during the precipitation and the amount of sodium sulphide added to precipitate zinc sulphide. The data of these tests are used to describe two empirical mathematical models for zinc and yttrium precipitation yields by regression analysis. The highest precipitation yields for zinc are obtained under the following conditions: pH equal to 2–2.5% and 10–12% v/v of Na2S concentrated solution at 10% w/v. In these conditions the coprecipitation of yttrium is of 15–20%.Finally further yttrium precipitation experiments by oxalic acid on the residual solutions, after removing of zinc, show that yttrium could be recovered and calcined to obtain the final product as yttrium oxide. The achieved results allow to propose a CRT recycling process based on leaching of fluorescent powder from cathode ray tube and recovery of yttrium oxide after removing of zinc by precipitation. The final recovery of yttrium is 75–80%. 相似文献
18.
François Zimmermann Marie-Thérèse Lecler Frédéric Clerc Alain Chollot Eric Silvente Jérome Grosjean 《Waste management (New York, N.Y.)》2014,34(7):1257-1263
The fluorescent lamp recycling sector is growing considerably in Europe due to increasingly strict regulations aimed at inciting the consumption of low energy light bulbs and their end-of-life management. Chemical risks were assessed in fluorescent lamp recycling facilities by field measurement surveys in France, highlighting that occupational exposure and pollutant levels in the working environment were correlated with the main recycling steps and processes.The mean levels of worker exposure are 4.4 mg/m3, 15.4 μg/m3, 14.0 μg/m3, 247.6 μg/m3, respectively, for total inhalable dust, mercury, lead and yttrium. The mean levels of airborne pollutants are 3.1 mg/m3, 9.0 μg/m3, 9.0 μg/m3, 219.2 μg/m3, respectively, for total inhalable dust, mercury, lead and yttrium. The ranges are very wide. Surface samples from employees’ skin and granulometric analysis were also carried out. The overview shows that all the stages and processes involved in lamp recycling are concerned by the risk of hazardous substances penetrating into the bodies of employees, although exposure of the latter varies depending on the processes and tasks they perform. The conclusion of this study strongly recommends the development of a new generation of processes in parallel with more information sharing and regulatory measures. 相似文献
19.
Analysis of methanogenic activity in a thermophilic-dry anaerobic reactor: use of fluorescent in situ hybridization 总被引:1,自引:0,他引:1
Montero B García-Morales JL Sales D Solera R 《Waste management (New York, N.Y.)》2009,29(3):1144-1151
Methanogenic activity in a thermophilic-dry anaerobic reactor was determined by comparing the amount of methane generated for each of the organic loading rates with the size of the total and specific methanogenic population, as determined by fluorescent in situ hybridization. A high correlation was evident between the total methanogenic activity and retention time [-0.6988Ln(x)+2.667] (R(2) 0.8866). The total methanogenic activity increased from 0.04x10(-8) mLCH(4) cell(-1)day(-1) to 0.38x10(-8) mLCH(4) cell(-1)day(-1) while the retention time decreased, augmenting the organic loading rates. The specific methanogenic activities of H(2)-utilizing methanogens and acetate-utilizing methanogens increased until they stabilised at 0.64x10(-8) mLCH(4) cell(-1)day(-1) and 0.33x10(-8) mLCH(4) cell(-1)day(-1), respectively. The methanogenic activity of H(2)-utilizing methanogens was higher than acetate-utilizing methanogens, indicating that maintaining a low partial pressure of hydrogen does not inhibit the acetoclastic methanogenesis or the anaerobic process. 相似文献
20.
In order to recycle the linear type of SFL (spent fluorescent lamp), mercury from SFL should be controlled to prevent leaking into the environment. For mercury emission from SFL, mercury concentration is estimated in the parts of SFL such as glass tube, phosphor powder, and base cap using the end-cutting unit. It is also evaluated mercury emission in the effluent gas in the end-cutting unit with changing flow rate. From the results of mercury emission from SFLs, phosphor powder has greater than 80% of mercury amount in SFL and about 15% of mercury amount contained in glass tube. The initial mercury concentration in vapor phase is almost decreased linearly with increasing airflow rate from 0.7 L/min to 1.3 L/min. It is desirable that airflow rate should be high until the concentration of mercury vapor will be stable because the stabilized concentration becomes to be low and the stabilized time goes to be short as increased airflow rate. From KET and TCLP results, finally, phosphor powder should be managed as a hazardous waste but base-cap and glass are not classified as hazardous wastes. 相似文献