Assessment of ground water quality for drinking purpose, District Nainital, Uttarakhand, India

The ground water quality of District Nainital (Uttarakhand, India) has been assessed to see the suitability of ground water for drinking and irrigation applications. This is a two-part series paper and this paper examines the suitability of ground water including spring water for drinking purposes. Forty ground water samples (including 28 spring samples) were collected during pre- and post-monsoon seasons and analyzed for various water quality constituents. The hydrochemical and bacteriological data was analyzed with reference to BIS and WHO standards and their hydrochemical facies were determined. The concentration of total dissolved solids exceeds the desirable limit of 500 mg/L in about 10% of the samples, alkalinity values exceed the desirable limit of 200 mg/L in about 30% of the samples, and total hardness values exceed the desirable limit of 300 mg/L in 15% of the samples. However, no sample crosses the maximum permissible limit for TDS, alkalinity, hardness, calcium, magnesium, chloride, sulfate, nitrate, and fluoride. The concentration of chloride, sulfate, nitrate, and fluoride are well within the desirable limit at all the locations. The bacteriological analysis of the samples does not show any sign of bacterial contamination in hand pump and tube-well water samples. However, in the case of spring water samples, six samples exceed the permissible limit of ten coliforms per 100 ml of sample. It is recommended that water drawn from such sources should be properly disinfected before being used for drinking and other domestic applications. Among the metal ions, the concentration of iron and lead exceeds the permissible limit at one location whereas the concentration of nickel exceeds the permissible limit in 60 and 32.5% of the samples during pre- and post-monsoon seasons, respectively. The grouping of samples according to their hydrochemical facies indicates that majority of the samples fall in Ca–Mg–HCO₃ hydrochemical facies.     

Using the polychaete Arenicola marina to determine toxicity and bioaccumulation of PAHS bound to sediments

Transportation system has contributed significantly to the development of human civilization; on the other hand it has an enormous impact on the ambient air quality in several ways. In this paper the air and noise pollution at selected sites along three sections of National Highway was monitored. Pakistan National Highway Authority has started a Highway Improvement program for rehabilitations and maintenance of National highways to improve the traffic flows, and would ultimately improve the air quality along highways. The ambient air quality and noise level was monitored at nine different locations along these sections of highways to quantify the air pollution. The duration of monitoring at individual location was 72 h. The most of the sampling points were near the urban or village population, schools or hospitals, in order to quantify the air pollution at most affected locations along these roads. A database consisting of information regarding the source of emission, local metrology and air quality may be created to assess the profile of air quality in the area.     

Indoor Air Quality of Public Places in Mumbai, India in Terms of Volatile Organic Compounds

Indoor air quality at nine locations viz. food courts, restaurant, bar, conference room, office and theater, which can be classified as public places have been monitored for Volatile Organic Compounds (VOCs) content. Forty VOCs have been identified and one fourth of these are classified as Hazardous Air Pollutants. Levels of most VOCs are observed to be below the guideline values for public places and offices, as adopted by Hong Kong. Consumer goods are found to be predominant source of chlorinated VOCs in indoor air. Levels of benzene and carbon tetrachlorides were observed to be above the guideline values at all the locations. Effect of ozonisation on Total VOC concentrations have also been studied.     

Surface water quality assessment of the Vatinsky Egan River catchment, West Siberia

Stream water chemistry were analyzed across Vatinsky Egan River Catchment (West Siberia). The objective of the study is to reveal the spatial and seasonal variations of the water quality and to assess the anthropogenic chemical inputs into the river system. Stream chemistry were monitored in 24 sampling sites for a period extended from January 2002 to December 2005. Spatial distribution of constituents in the Vatinsky Egan River basin indicated pollution from non-point sources associated with oil development. Data revealed that ion concentrations of river waters are usually negatively correlated with stream discharge. The major spatial variations of the hydrochemistry are related to the salinity. Chloride exhibited wide and high concentration range. A comparison with another rivers of West Siberia reveals that Vatinsky Egan River is the most saline and regional impacts further out in the watershed. The salinity of the river water increases substantially as it crosses Samotlor oil field. Many Cl(-) concentrations in the middle and lower parts of the catchment exceed the world average river values by one or more orders of magnitude. For 38% of sampling events, total petroleum hydrocarbons (TPH) concentrations were above the recommended water quality standards.     

Evaluation of environmental impacts of Integrated Industrial Estate��Pantnagar through application of air and water quality indices

Large-scale industrialization, population inflow, and rapid urbanization coupled with unfavorable meteorological conditions often induce significant degradation of urban environment. In order to assess the extent of environmental impacts due to establishment of the Integrated Industrial Estate??Pantnagar (IIE-Pantnagar), ambient air and groundwater were monitored from June 2007 to May 2008. Collected baseline information was normalized and interpreted with the application of air (AQI) and water quality indices (WQI). Among the pre-identified air pollutants, suspended particulate matter was found to be the principal culprit to deteriorate ambient air quality, with a maximum annual concentration of 418.5 ??g/m³. Monthly average concentrations of respirable particulate matter (aerodynamic diameter < 10 ??m) also persist at a critical level with an annual maximum of 207.3 ??g/m³. A segmented linear function with maximum operator concept was used to compute AQI, and the developed index was found well suitable to demonstrate temporal variations of ambient air quality. The computed AQI value for the selected study region varied from moderate (97.0) to very poor pollution level (309.2) in respect to developed air quality standards. Furthermore, an integrated WQI was developed comprising 9 parameters, and among all the 10 pre-identified locations, the average groundwater quality was found acceptable in terms of Indian drinking water standards. The maximum WQI (70.6) was found at the Kichha Railway Station during summer months, revealing moderate pollution load. Industrial discharge from IIE-Pantnagar coupled with other industrial setup may hold responsible for such kind of degradation of water quality. In contrast, WQI computed at Rudrapur City demonstrate minimum (15.0?C22.1) pollution load. For 95% of the monitoring period, the computed WQI was found acceptable for all selected locations with few exceptions. The application of WQI to assess temporal variations in groundwater quality was therefore found satisfactory.     

Assessment of anthropogenic sources of water pollution using multivariate statistical techniques: a case study of the Alqueva’s reservoir, Portugal

Multivariate statistical techniques were applied to evaluate spatial/temporal variations, and to interpret water quality data set obtained at Alqueva reservoir (south of Portugal). The water quality was monitored at nine different sites, along the water line, over a period of 18 months (from January 2006 to May 2007) using 26 water quality parameters. The cluster analysis allowed the formation of five different similarity groups between sampling sites, reflecting differences on the water quality at different locations of the Alqueva reservoir system. The PCA/FA identified six varifactors, which were responsible for 64% of total variance in water quality data set. The principal parameters, which explained the variability of quality water, were total phosphorus, oxidability, iron, parameters that at high concentrations indicate pollution from anthropogenic sources, and herbicides indicative of an intensive agricultural activity. The spatial analysis showed that the water quality was worse in the north of the reservoir.     

Assessing coastal waters of American Samoa: territory-wide water quality data provide a critical “big-picture” view for this tropical archipelago

The coastal waters of American Samoa’s five high islands (Tutuila, Aunu’u, Ofu, Olosega, and Ta’u) were surveyed in 2004 using a probabilistic design. Water quality data were collected from the near-shore coastal habitat, defined as all near-shore coastal waters including embayments, extending out to 1/4 mile off-shore. Hydrography and water column samples were collected, and water quality data were compared to the Territorial water quality standards for pH, dissolved oxygen (DO), Enterococcus, chlorophyll a, water clarity, total nitrogen, and total phosphorus. All station measurements for pH, DO, and Enterococcus satisfied the local water quality standards, although some fraction of the Territory could not be assessed for either DO or Enterococcus. With respect to chlorophyll a, 66 ± 18% of Territory coastal waters complied with the standard, while 34 ± 18% failed to comply with the standard. For water clarity, 54 ± 18% of the Territorial waters complied with the standard while 42 ± 7% failed to comply. Territorial waters satisfied the standards for total nitrogen and phosphorus 72 ± 17% and 92 ± 10%, respectively. These data provide the first “big-picture” view of water quality in the near shore region around the high islands of American Samoa. While the picture is encouraging, these data suggest emerging water quality concerns.     

Determination of toxic inorganic elements pollution in ground waters of Kahuta Industrial Triangle Islamabad, Pakistan using inductively coupled plasma mass spectrometry

The present study deals with the ground water quality assessment in Kahuta Industrial Triangle Islamabad, Pakistan. The objective of the study was to assess ground water quality against the drinking water standards for various toxic inorganic elements. Representative groundwater samples were collected and analyzed in the Water Quality Laboratory of Pakistan Council of Research in Water Resources (PCRWR) at Islamabad, Pakistan. The samples were run on ICP-MS (Inductively coupled plasma mass spectrometry), which has the capability to separate and quantify 70 elements at a time. One of the finding of study is that ICP-MS is a very good tool to analyze broad range of toxic inorganic elements to the level of parts per billion (ppb). World Health Organization drinking water standards shows that these toxic inorganic elements such as heavy metals even at this concentration level (ppb) are injurious to human health. This analysis indicated pollution of various toxic elements including Selenium. Vertical leachate through industrial waste septic tanks is identified as major cause of groundwater pollution in the Industrial Triangle. Monitoring of the septic tanks and groundwater quality in study area is suggested along with remedial measures.     

Outdoor-indoor air quality in Riyadh: SO2, NH3, and HCHO

A funded research project was conducted during the period July1992 through November 1994. The project was designed to evaluateindoor and ambient air quality in and around buildings of different types and uses in Riyadh, the capital of Saudi Arabia.Thirty intercity buildings and two outercity (background) siteswere carefully selected and monitored for air quality. Ten airpollutants, together with relevant meteorological parameters, were monitored indoor and outdoor at each site continuously andsimultaneously for a period of two weeks covering summer and winter seasons.This article discusses the results obtained for sulfur dioxide (SO₂), ammonia (NH₃) and formaldehyde (HCHO). Results of this investigation revealed that most sites had on the averageexceeded the recommended standards for SO₂ and NH₃ bothindoor and outdoor, with indoor levels being worse than outdoorduring winter time. Several sites also showed high levels of HCHO, with outdoor levels being consistently higher than indoor.Statistical and frequency analyses were performed on the collected data, showing seasonal and sector by sector variability, and outdoor-indoor correlations.     

中美饮用水水源水质标准比较

对我国《地表水环境质量标准》(GB 3838-2002)和《地下水质量标准》(GB/T 14848-1993)与美国EPA《清洁水法案》和《安全饮用水法案》中适用范围、分类分级、指标项目、标准限值以及修订周期等方面内容进行比较分析。指出了我国饮用水水源水质标准存在的问题,提出构建和修订我国水源地水质标准的建议。     

运用热脱附/GC/MS分析研究室内空气中TVOC浓度及种类分布

利用热脱附/GC/MS联用技术定性、定量(半定量)分析了多组有代表性的室内空气样品。结果表明,室内空气挥发性有机气体的主要成分是苯系物、烃类、醛酮类、酯类等;装修后3个月内的家居室内空气中的苯25%超标,甲苯58%超标,二甲苯79%超标,TVOC 100%超标;一年后,仅TVOC还有11%的超标。办公室情况类似。     

Assessment of water quality using cluster analysis in coastal region of Mumbai, India

The coastal water quality of Mumbai is deteriorating due to various point and non-point wastewater sources. Hence, it is desirable to monitor coastal water quality for various water-related activities like bathing, contact water sports, recreation, and commercial fishing. The objective of this paper is to assess the seasonal water quality on the basis of seawater standards. Based on water-quality analysis of 17 seafronts and beaches, most of the parameters were exceeding the standards. The statistical cluster analysis was carried out for evaluating impact of wastewater and sewage discharges. The hierarchical cluster analysis resulted into three clustered groups, namely less polluted, moderately polluted, and highly polluted sites with similar characteristics of water quality. Mahim was found to be worst-affected beach due to incoming organic load from the Mithi river in comparison to other seafronts and beaches. Unaccounted sources of sewage and wastewater should be identified and rerouted through sewerage system by improving collection efficiency, treatment, and proper disposal for achieving designated receiving water quality standards.     

The role of Health Impact Assessment in the setting of air quality standards: An Australian perspective

The approaches used for setting or reviewing air quality standards vary from country to country. The purpose of this research was to consider the potential to improve decision-making through integration of HIA into the processes to review and set air quality standards used in Australia.To assess the value of HIA in this policy process, its strengths and weaknesses were evaluated aligned with review of international processes for setting air quality standards.Air quality standard setting programmes elsewhere have either used HIA or have amalgamated and incorporated factors normally found within HIA frameworks. They clearly demonstrate the value of a formalised HIA process for setting air quality standards in Australia.The following elements should be taken into consideration when using HIA in standard setting. (a) The adequacy of a mainly technical approach in current standard setting procedures to consider social determinants of health. (b) The importance of risk assessment criteria and information within the HIA process. The assessment of risk should consider equity, the distribution of variations in air quality in different locations and the potential impacts on health. (c) The uncertainties in extrapolating evidence from one population to another or to subpopulations, especially the more vulnerable, due to differing environmental factors and population variables. (d) The significance of communication with all potential stakeholders on issues associated with the management of air quality.In Australia there is also an opportunity for HIA to be used in conjunction with the NEPM to develop local air quality standard measures. The outcomes of this research indicated that the use of HIA for air quality standard setting at the national and local levels would prove advantageous.     

Distribution and Fractionation of Heavy Metals in Solid Waste from Selected Sites in the Industrial Belt of Delhi, India

Solid waste samples were collected from five small-scale industrial sites in the National Capital Territory (NCT) of Delhi. These industrial sites represent the regional spread of the industrial belt in the NCT of Delhi. Solid waste samples were digested using aqua-regia and HF in air tight teflon bombs for the quantitative analysis of heavy metals (Hg, Pb, Cd, Mn, Fe, Ni, Cu and Zn) by GBC model 902 atomic absorption spectrophotometer. Hg was analysed using hydrid generator attachment. Beside this sequential extraction was used to fractionate five heavy metals (Pb, Ni, Cd, Cu and Zn) into six operationally defined phases, viz. water soluble, exchangeable, carbonate-bound, Fe-Mn oxides, organic-bound and residual fractions to ascertain the relative mobility of these metals. The result obtained showed metal concentration to be in the range of Hg 0.42-2.3; Pb 23-530; Cd 014-224; Mn 494-19 964; Fe 35 684-233 119; Ni 192-1534; Cu 3065-10 144 and Zn 116-23 321 (all units in mg kg(-1)) in all the industrial areas studied. The fractionated toxic metals like Pb, Ni and Cd were observed to be in the range of 25-35, 15-50 and 40-50%, respectively, in mobile or bio-available fractions of solid waste. As this waste is often disposed-off by the roadsides, low lying areas, abandoned quarries or in landfill sites which are often not properly planned, thus posing potential risk to ground and surface water quality to millions of people living downstream.     

马鞍山市城区主干道近地面空气质量调查

为调查马鞍山市城区主干道近地面空气质量状况,马鞍山市环境监测中心站于1999年1月19日～1月21日对城区3条主干道的5个监测点近地面空气质量进行了监测.结果表明,在城市整体环境空气质量良好的情况下,交通干道近地面空气污染较严重,主要污染源是机动车尾气,NOx、CO、TSP是特征性污染物,其中NOx平均分布浓度与车流量近似成正相关,从时间分布上看,NOx平均分布浓度早上最高,晚上次之,中午最低.指出,为改善城市的环境空气质量,必须加强对机动车尾气的监督管理.     

长江口南通地区农村集中式饮用水源水质状况调查

对南通市24座乡镇地表水厂以及199座乡镇地下水厂的水源水质状况进行了调查.结果表明,地表水水源地中有14座水厂达标,其取水量占地表水取水总量62.8%.水体中主要污染物是NH3-N、石油类、Imn.全市乡镇地下水厂饮用水源水质达标水厂为56座,其取水量占地下水取水总量的26.2%.全市地下水中主要污染物为NH3-N、...     

Application of water quality index for groundwater quality assessment: Thirumanimuttar sub-basin, Tamilnadu, India

An attempt has been made to understand the hydrogeochemical parameters to develop water quality index in Thirumanimuttar sub-basin. A total of 148 groundwater samples were collected and analyzed for major cations and anions. The domination of cations and anions was in the order of Na>Mg>Ca>K for cations and Cl>HCO₃ >SO₄ in anions. The hydrogeochemical facies indicate alkalis (Na and K) exceed alkaline earths (Ca and Mg) and strong acids (Cl and SO₄) exceed weak acid (HCO₃). Water quality index rating was calculated to quantify overall water quality for human consumption. The PRM samples exhibit poor quality in greater percentage when compared with POM due to effective leaching of ions, over exploitation of groundwater, direct discharge of effluents and agricultural impact. The overlay of WQI with chloride and EC correspond to the same locations indicating the poor quality of groundwater in the study area. SAR, Na%, and TH were noted higher during both the seasons indicating most of the groundwater locations not suitable for irrigation purposes.     

Using diatoms as quality indicators for a newly-formed urban lake and its catchment

Periphytic diatoms were studied to evaluate the water quality of a newly created lake, formed by the enclosure of the formerly tidal Cardiff Bay (Wales, UK), and the effects of two inflowing rivers which drain densely populated and industrialised catchments. Seven sites in Cardiff Bay and two locations on the inflowing rivers were monitored for diatoms and water chemistry over 2 years. Water quality was assessed using a revised UK trophic diatom index (TDI) and new methods to determine ecological quality ratios and ecological status classes as required by the EU Water Framework Directive. Diatom assemblages reflected spatiotemporal variations in environmental conditions between the rivers and Cardiff Bay and within the bay. In the bay, diatoms reflected differences in river quality and possibly local pollution in certain areas of the lake. High values of the TDI indicated eutrophic to hypertrophic conditions in both rivers and in the bay and diatoms indicated poor ecological status.     

Monitoring in the Tualatin River Basin to assess the effectiveness of the Oregon Forest Practicers Program: Preliminary results of phosphorus monitoring

The Oregon Department of Forestry is a designated management agency to provide a forestry program to assist in bringing the Tualatin River into complicance with pH and dissolved oxygen water quality standards. The Oregon Environmental Quality Commission set a total maximum daily load (TMDL) of 70 µg/l total phosphorus to control algae growth and meet these standards. The Department of Forestry has a basin effectiveness monitoring plan to determine that the Oregon Forest Practice Rules' BMPs are maintaining adequate control of phosphorus loadings from forest operations. Three sites monitored during May to October of 1990 were augmented by eight more sites in 1991. As laboratory methods were refined, the results became more accurate. The 1991 monitoring showed lower phosphorus levels that were consistent for each tributary. Mean total phosphorus levels ranged from 17 to 65 µg/l. Preliminary field reconnaissance suggests a correlation between phosphorus levels and underlying geology. Concentrations were lowest at sites underlain by tertiary intrusive basalts, next higher for sites with terrestrial basalt, next higher for one site with a basalt-sandstone bedrock mix, and highest for sites underlain predominately by sandstone. These results may be modified by 1992 monitoring and further analysis.     

Fluoride contamination in drinking water in rural habitations of Central Rajasthan, India

Fluoride concentration in groundwater sources used as major drinking water source in rural area of block Nawa (Nagaur District), Rajasthan was examined and the toxic effects by intake of excess fluoride on rural habitants were studied. In block 13, habitations (30%) were found to have fluoride concentration more than 1.5 mg/l (viz. maximum desirable limit of Indian drinking water standards IS 10500, 1999). In five habitations (11%), fluoride concentration in groundwater is at toxic level (viz. above 3.0 mg/l). The maximum fluoride concentration in the block is 5.91 mg/l from Sirsi village. As per the desirable and maximum permissible limit for fluoride in drinking water, determined by World Health Organization or by Bureau of Indian Standards, the groundwater of about 13 habitations of the studied sites is unfit for drinking purposes. Due to the higher fluoride level in drinking water, several cases of dental and skeletal fluorosis have appeared at alarming rate in this region. There is an instant need to take ameliorative steps in this region to prevent the population from fluorosis. Groundwater sources of block Nawa can be used for drinking after an effective treatment in absence of other safe source. The evaluation of various defluoridation methods on the basis of social and economical structure of India reveals that the clay pot chip, activated alumina adsorption, and Nalgonda techniques are the most promising.