Effects of static vs. tidal hydrology on pollutant transformation in wetland sediments

This work addressed effects of hydrology on biogeochemical processes relevant to pollutant chemical transformation in wetland sediments. Microcosms were designed to impose three hydrologic conditions on salt marsh sediments: (i) drained-oxidized redox potenial (Eh); (ii) flooded-reduced Eh and, (iii) diurnal tide-oscillating Eh. The test chemicals were N- and/or S-heterocycles (NSHs) including quinoxaline (1,4-benzodiazine), 2-methylquinoxaline(2-methyl-1,4-benzodiazine), 2,3-dimethylquinoxalinen (2,3-dimethyl-1,4-benzodiazine), phenazine (2,3,5,6-dibenzo-1,4-diazine), acridine (2,3,5,6-dibenzopyridine), dibenzothiophene (2,3,5-dibenzothiophene), phenothiazine (dibenzo-1,4-thiazine), and phenanthridine (2,3-benzoisoquinoline). Biogeochemical processes reflected the hydrologic conditions in ways analogous to field settings, e.g., Eh characteristics were drastically different: static (flooded and drained) systems had reduced (mu = -428 mV +/- 57) and oxidized (mu = +73 mV +/- 32) values, respectively, with no evidence of periodic variation while the tidal systems exhibited regularly oscillating Eh (amplitudes 40-250 mV). Sediment trace gases also corresponded to the Eh, with the major species detected being CO2 and H2O (drained, tidal) vs. CO2 + H2O + sulfides + methane (flooded). The NSH transformation rates were different in each hydrologic regime and decreased as follows: tidal > or = drained > flooded. These results indicated that there were subtle differences in NSH processing in drained and tidal systems, but both of these systems transformed NSHs faster and to lower levels than flooded sediments. These data suggest that in situ remediation options that preserve wetland integrity and tidal hydrology can be as or more effective than static conditions that obtain in approaches such as impoundment and excavation-upland placement.     

INFLUENCES OF INCREASED SAND DELIVERY ON THE MORPHOLOGY OF SAND AND GRAVEL CHANNELS1

ABSTRACT A flume study was conducted to examine (1)changes in the particle-size distribution of sediments in riffles due to the proportion of sand in transport and the total rate of bedload transport at the time the riffle is deposited and (2) the effect of high sand transport rates on the stability of gravel riffles. The median particle size of sediment deposited in the riffle was larger than that of the sediment in transport. Small but significant (a = 0.05) decreases in the median particle size of riffle sediments resulted as the sand-to-gravel ratio. Increased concentrations of sand in transport caused previously stable gravel riffles to undergo scour. These results, in combination with information from other studies, suggest that an alluvial channel with pool-riffle sequences and with sand and gravel beds may respond to an increased delivery of sand by reducing form roughness. Form roughness can be reduced by degrading riffles and filling pools. Subsequent responses may be increases in width-to-depth ratio and slope.     

Conditions affecting the release of phosphorus from surface lake sediments

Laboratory studies were conducted to determine the effect of pH and redox conditions, as well as the effect of Fe, Mn, Ca, Al, and organic matter, on the release of ortho-phosphates in lake sediments taken from Lakes Koronia and Volvi (Northern Greece). Results were evaluated in combination with experiments to determine P fractionation in the sediment. The study revealed the major effect of redox potential and pH on the release of P from lake sediments. Both lakes showed increased release rates under reductive conditions and high pH values. The fractionation experiments revealed increased mobility of the reductive P fraction as well as of the NaOH-P fraction, indicating participation of both fractions in the overall release of sediment-bound P, depending on the prevailing environmental conditions. The results were assessed in combination with the release patterns of Fe, Mn, Ca, Al, and organic matter, enabling the identification of more specific processes of P release for each lake. The basic release patterns included the redox induced reductive dissolution of P-bearing metal oxides and the competitive exchange of phosphate anions with OH- at high pH values. The formation of an oxidized surface microlayer under oxic conditions acted as a protective film, preventing further P release from the sediments of Lake Volvi, while sediments from Lake Koronia exhibited a continuous and increased tendency to release P under various physicochemical conditions, acting as a constant source of internal P loading.     

THE FATE OF NITRATE IN LAKE SEDIMENT COLUMNS1

ABSTRACT: To investigate the magnitude of denitrification and assimilatory nitrate reduction as these reactions relate to the fate of nitrate reaching sediments via groundwater seepage, undisturbed core samples of sediments (40 cm length) from two lakes (Mendota and Tomahawk) were leached from the bottom (at 1.4 cm/day) with a solution of ¹⁵N-nitrate (10 mg N/liter). The sediment columns were fitted with Pt electrodes to measure the oxidation-reduction (Eh) potential. While leaching removed considerable ammonium-N and soluble organic N, essentially no ¹⁵N had passed through the columns by 50 days. The Eh readings indicated that denitrification was occurring in the lower portions of the columns. The ¹⁵N distribution of the sediment N after 50 days showed that about 15 to 26% of the added nitrate-N was converted to organic N and ammonium-N. The data show that denitrification can be a significant N sink in seepage lakes.     

Phosphorus flux from bottom sediments in Lake Eucha, Oklahoma

Phosphorus inputs into reservoirs include external sources from the watershed and internal sources from the reservoir bottom sediments. This study quantified sediment P flux in Lake Eucha, northeastern Oklahoma, USA, and evaluated the effectiveness of chemical treatment to reduce sediment P flux. Six intact sediment-water columns were collected from three sites in Lake Eucha near the reservoir channel at depths of 10 to 15 m. Three intact sediment and water columns from each site were incubated for 21 d at approximately 22 degrees C under aerobic conditions, and three were incubated under anaerobic conditions (N2 with 300 ppm CO2); sediment P flux was estimated over the 21 d for each core. The overlying water in the cores was bubbled with air for approximately 1 wk and then treated with aluminum sulfate (alum). The cores were incubated at approximately 22 degrees C for an additional 14 d under aerobic or anaerobic conditions, and sediment P flux after alum treatment was estimated for each core. Sediment P flux was approximately four times greater under anaerobic conditions compared with aerobic conditions. Alum treatment of the intact sediment-water columns reduced (8x) sediment P flux under anaerobic conditions. Internal P flux (1.03 and 4.40 mg m(-2) d(-1) under aerobic and anaerobic conditions, respectively) was greater than external P flux (0.13 mg m(-2) d(-1)). The internal P load (12 Mg yr(-1)) from reservoir bottom sediments was almost 25% of the external P load (approximately 48 Mg yr(-1)) estimated using a calibrated watershed model.     

Selenium stable isotope ratios in California agricultural drainage water management systems

Selenium stable isotope ratios are known to shift in predictable ways during various microbial, chemical, and biological processes, and can be used to better understand Se cycling in contaminated environments. In this study we used Se stable isotopes to discern the mechanisms controlling the transformation of oxidized, aqueous forms of Se to reduced, insoluble forms in sediments of Se-affected environments. We measured 80Se/76Se in surface waters, shallow ground waters, evaporites, digested plants and sediments, and sequential extracts from several sites where agricultural drainage water is processed in the San Joaquin Valley of California. Selenium isotope analyses of samples obtained from the Tulare Lake Drainage District flow-through wetland reveal small isotopic contrasts (mean difference 0.7%) between surface water and reduced Se species in the underlying sediments. Selenium in aquatic macrophytes was very similar isotopically to the NaOH and Na2SO3 sediment extracts designed to recover soluble organic Se and Se(0), respectively. For the integrated on-farm drainage management sites, evaporite salts were slightly (approximately 0.6%) enriched in the heavier isotope relative to the inferred parent waters, whereas surface soils were slightly (approximately 1.4%) depleted. Bacterial or chemical reduction of Se(VI) or Se(IV) may be occurring at these sites, but the small isotopic contrasts suggest that other, less isotopically fractionating mechanisms are responsible for accumulation of reduced forms in the sediments. These findings provide evidence that Se assimilation by plants and algae followed by deposition and mineralization is the dominant transformation pathway responsible for accumulation of reduced forms of Se in the wetland sediments.     

Nutrients and Heavy Metals in Legacy Sediments: Concentrations,Comparisons with Upland Soils,and Implications for Water Quality

Concentrations of nutrients and heavy metals in streambank legacy sediments are needed to estimate watershed exports and to evaluate against upland inputs. Concentrations of nutrients and heavy metals were determined for legacy sediments in 15 streambanks across northeastern Maryland, southeastern Pennsylvania, and northern Delaware. Samples were collected from multiple bank depths from forested, agricultural, urban, and suburban sites. Analyses were performed for fine (<63 μm) and coarse sediment fractions. Nutrient and heavy metal concentrations were significantly higher in fine than coarse legacy sediments and water extractable nutrient concentrations were significantly greater for fine sediments. Nutrient and heavy metal concentrations were highest in streambank legacy sediments associated with urban land use, but few differences were found with bank depth. Total N (40–3,970 mg/kg) and P (25–1,293 mg/kg) and bioavailable P (0.25–48.8 mg/kg) concentrations for legacy sediments were lower than those for upland soils. This suggests that legacy sediments could serve as sink or source of N and P depending on the redox conditions and stream water nutrient concentrations. However, despite low concentrations, caution should be exercised since streambank erosion and legacy sediment mass loadings could be high, these sediments are in immediate proximity of aquatic ecosystems, and biogeochemical transformations could result in release of the nutrients.     

Pyrosequencing reveals bacteria carried in different wind-eroded sediments

Little is known about the microbial communities carried in wind-eroded sediments from various soil types and land management systems. The novel technique of pyrosequencing promises to expand our understanding of the microbial diversity of soils and eroded sediments because it can sequence 10 to 100 times more DNA fragments than previous techniques, providing enhanced exploration into what microbes are being lost from soil due to wind erosion. Our study evaluated the bacterial diversity of two types of wind-eroded sediments collected from three different organic-rich soils in Michigan using a portable field wind tunnel. The wind-eroded sediments evaluated were a coarse sized fraction with 66% of particles >106 μm (coarse eroded sediment) and a finer eroded sediment with 72% of particles <106 μm. Our findings suggested that (i) bacteria carried in the coarser sediment and fine dust were effective fingerprints of the source soil, although their distribution may vary depending on the soil characteristics because certain bacteria may be more protected in soil surfaces than others; (ii) coarser wind-eroded sediment showed higher bacterial diversity than fine dust in two of the three soils evaluated; and (iii) certain bacteria were more predominant in fine dust (, , and ) than coarse sediment ( and ), revealing different locations and niches of bacteria in soil, which, depending on wind erosion processes, can have important implications on the soil sustainability and functioning. Infrared spectroscopy showed that wind erosion preferentially removes particular kinds of C from the soil that are lost via fine dust. Our study shows that eroded sediments remove the active labile organic soil particulates containing key microorganisms involved in soil biogeochemical processes, which can have a negative impact on the quality and functioning of the source soil.     

Impact of Dredging on Phosphorus Transport in Agricultural Drainage Ditches of the Atlantic Coastal Plain1

Abstract: Drainage ditches can be a key conduit of phosphorus (P) between agricultural soils of the Atlantic Coastal Plain and local surface waters, including the Chesapeake Bay. This study sought to quantify the effect of a common ditch management practice, sediment dredging, on fate of P in drainage ditches. Sediments from two drainage ditches that had been monitored for seven years and had similar characteristics (flow, P loadings, sediment properties) were sampled (0‐5 cm) after one of the ditches had been dredged, which removed fine textured sediments (clay = 41%) with high organic matter content (85 g/kg) and exposed coarse textured sediments (clay = 15%) with low organic matter content (2.2 g/kg). Sediments were subjected to a three‐phase experiment (equilibrium, uptake, and release) in recirculating 10‐m‐long, 0.2‐m‐wide, and 5‐cm‐deep flumes to evaluate their role as sources and sinks of P. Under conditions of low initial P concentrations in flume water, sediments from the dredged ditch released 13 times less P to the water than did sediments from the ditch that had not been dredged, equivalent to 24 mg dissolved P. However, the sediments from the dredged ditch removed 19% less P (76 mg) from the flume water when it was spiked with dissolved P to approximate long‐term runoff concentrations. Irradiation of sediments to destroy microorganisms revealed that biological processes accounted for up to 30% of P uptake in the coarse textured sediments of the dredged ditch and 18% in the fine textured sediments of the undredged ditch. Results indicate that dredging of coastal plain drainage ditches can potentially impact the P buffering capacity of ditches draining agricultural soils with a high potential for P runoff.     

DISTRIBUTION OF SEDIMENT PHOSPHORUS POOLS AND FLUXES IN RELATION TO ALUM TREATMENT1

ABSTRACT: The distribution of sediment physical characteristics, sediment phosphorus (P) pools, and laboratory‐based rates of P release from the sediments were used to identify regions and dosage for alum treatment in Wind Lake, Wisconsin. Using variations in sediment moisture content, we identified an erosional zone at depths < 1.4 m and an accumulation zone at depths > 2.6 m. Mean concentrations of porewater P, loosely‐bound P, iron‐ and aluminum‐bound P, and mean rates of P release from sediments under anoxic conditions were high in the accumulation zone compared to sediment P characteristics in the erosional zone, indicating focusing of readily mobilized sediment P pools from shallow regions and accumulation to deep regions. We determined that a future alum treatment for control of internal P loading would be most effective at depths > 2.6 in the accumulation zone. The mean rate of anoxic P release from sediments encountered in the accumulation zone (8.3 mg m^‐2 d^‐1) was used in conjunction with a summer anoxic period of 122 d, and a treatment area of 1.6 km² to estimate an internal P load of 1,600 kg to be controlled. Our results suggest that an understanding of the distribution of sediment P pools and P fluxes in lakes provides a strategy for estimating alum dosage and application areas.     

Phosphorus sorption characteristics of estuarine sediments under different redox conditions

Phosphorus (P) plays a major role in eutrophication of aquatic systems. Estuarine sediments could function as sources or sinks for P to the overlying water column depending upon their physico-chemical characteristics. Understanding of P sorption phenomena in estuarine sediments is important in regulating the P availability in estuaries. Phosphorus sorption characteristics of sediments from the Indian River Lagoon, Florida, USA, were determined to examine the role of selected physico-chemical properties of the sediments on soluble reactive P status in estuary water. Mean equilibrium P concentrations (EPCo) of 0.75 mg L(-1) and mean P sorption maxima (Smax) of 32.2 mg kg(-1) were obtained under anaerobic conditions, compared with EPCo of 0.05 mg L(-1) and Smax of 132.7 mg kg(-1) under aerobic conditions. The higher EPCo values under anaerobic conditions and the greater Smax values under aerobic conditions were associated with amorphous and poorly crystalline iron. These results suggest that sediments enriched with amorphous and poorly crystalline forms of iron act as an excellent reservoir for P by adsorbing excessive P in aerobic sediment zones and releasing it upon burial under anaerobic conditions. This study also indicates that P compounds in sediments independently maintain equilibrium with P in solutions. Thus, heterogeneous systems like soil and sediment simply behave as a mixture of homogeneous surfaces as far as their P sorption characteristics are concerned, and hence can be successfully described by the Langmuir and Freundlich models.     

Geochemical partitioning of copper, lead, and zinc in benthic, estuarine sediment profiles

The geochemical partitioning of copper (Cu), lead (Pb), and zinc (Zn) was examined in benthic sediment profiles (0- to 20-cm depth interval) composed of relatively coarse (65-90% sand-sized particles), noncohesive, suboxic material (Eh +120 to +260 mV). Total Cu, Pb, and Zn concentrations ranged from 8.3 to 194, 16.3 to 74.8, and 30.1 to 220 mg/kg, respectively, and were related to vertical trends in sediment texture. The observed distribution coefficients describing solid-solution partitioning were in the range of 100 to 1000 L/kg. The geochemical partitioning of solid-phase Cu, Pb, and Zn between six operationally defined fractions was examined with a sequential extraction scheme. The association of Cu, Pb, and Zn with amorphous oxides, crystalline oxides, and organic matter was linearly dependent on the abundance of each respective phase. For retention by amorphous oxide minerals, the observed stoichiometry ranged from 5.2 to 23.7 mg/g for Cu, 12.8 to 21.5 mg/g for Pb, and 23.1 to 85.7 mg/g for Zn. Corresponding values for association with crystalline oxides were an order of magnitude less than those for amorphous oxides, indicating a lesser affinity of trace metals for crystalline oxides. The stoichiometric relationships describing association with organic matter ranged from 17.6 to 54.0 mg/g for Cu, 6.1 to 9.6 mg/g for Pb, and 6.4 to 16.4 mg/g for Zn. The results from this study provide an insight into processes controlling trace metal partitioning in coarse-textured, suboxic, estuarine sediments.     

Accumulation, release, and solubility of arsenic, molybdenum, and vanadium in wetland sediments

This study was undertaken to determine the fate of As, Mo, and V (trace elements, TEs) in the sediments of a constructed wetland in use for the remediation of potentially toxic trace element-contaminated agricultural drainwater. After three years of wetland operation, sediment cores were collected to determine changes in TE concentrations as a function of depth and the effects of varying water column depth. All TE concentrations were highest in the top 2 to 4 cm and decreased with depth. Molybdenum accumulated in the wetland sediments, up to levels of 32.5 +/- 4.6, 30.2 +/- 8.9, and 59.3 +/- 26.1 mg kg(-1) in the top 1 cm of sediment at water depths of 15, 30, and 60 cm, respectively. In the top 2 cm of sediment, As accumulated (28.2 +/- 3.0 mg kg(-1)) only at the 60-cm water depth. Below 2 cm, as much as 10 mg kg(-1) of As was lost from the sediment at all water depths. In most cases, V concentrations decreased in the sediment. In this wetland system, the lowest redox potentials were found near the sediment surface and increased with depth. Thus, in general As, Mo, and V concentrations in the sediment were highest under more reducing conditions and lowest under more oxidizing conditions. Most of the accumulated Mo (73%) became water soluble on drying of samples. This has important implications for systems undergoing changes in redox status; for instance, if these wetland sediments are dried, potentially large amounts of Mo may be solubilized.     

Sorption and degradation of pesticides in nursery recycling ponds

Knowledge of pesticide distribution and persistence in nursery recycling pond water and sediment is critical for preventing phytotoxicity of pesticides during water reuse and to assess their impacts to the environment. In this study, sorption and degradation of four commonly used pesticides (diazinon, chlorpyrifos, chlorothalonil, and pendimethalin) in sediments from two nursery recycling ponds was investigated. Results showed that diazinon and chlorothalonil were moderately sorbed [K(OC) (soil organic carbon distribution coefficient) from 732 to 2.45 x 10(3) mL g(-1)] to the sediments, and their sorption was mainly attributable to organic matter content, whereas chlorpyrifos and pendimethalin were strongly sorbed (K(OC) > or = 7.43 x 10(3) mL g(-1)) to the sediments, and their sorption was related to both organic matter content and sediment texture. The persistence of diazinon and chlorpyrifos was moderate under aerobic conditions (half-lives = 8 to 32 d), and increased under anaerobic conditions (half-lives = 12 to 53 d). In contrast, chlorothalonil and pendimethalin were quickly degraded under aerobic conditions with half-lives < 2.8 d, and their degradation was further enhanced under anaerobic conditions (half-lives < 1.9 d). The strong sorption of chlorpyrifos and pendimethalin by the sediments suggests that the practice of recycling nursery runoff would effectively retain these compounds in the recycling pond, minimizing their offsite movement. The prolonged persistence of diazinon and chlorpyrifos, however, implies that incidental spills, such as overflows caused by storm events, may contribute significant loads of such pesticides into downstream surface water bodies.     

CARBON CONTENT OF SEDIMENTS OF SMALL RESERVOIRS1

ABSTRACT: Carbon content was measured in sediments deposited in 58 small reservoirs across the United States. Reservoirs varied from 0.2 to 4000 km2 in surface area. The carbon content of sediment ranged from 0.3 to 5.6 percent, with a mean of 1.9 ± 1.1 percent. No significant differences between the soil and sediment carbon content were found using a paired t-test or ANOVA. The carbon content of sediments in reservoirs was similar to the carbon content of surface soils (0–10 cm) in the watershed, except in watersheds with shrub or steppe (desert) vegetation. Based on the sediment accumulation rates measured in each reservoir, the calculated organic carbon accumulation rates among reservoirs ranged from 26 to 3700 gC m^-2yr^-1, with a mean of 675 ± 739 gC m^-2yr^-1. The carbon content and accumulation rates were highest in sediments from grassland watersheds. High variability was found in carbon content, carbon accumulation, and sediment accumulation rates due to individual watershed and reservoir characteristics rather than to any broad physiographic patterns. The carbon accumulation rates in these reservoir sediments indicate that reservoir sediments could be a significant sink for organic carbon.     

Corer-reactors for contaminant flux measurement in sediments

Design details and operating instructions are provided for a sediment corer that can be converted into a reactor for the measurement of the fluxes of contaminants from sediments to overlying waters. The corer-reactor permits measurements, under controlled laboratory conditions, on intact, largely undisturbed sediment cores, without significantly perturbing the physical and chemical conditions found in the field. The design can be constructed in-house for around US dollar 240 (A dollar 400) (excluding motor and corer lid), making it a relatively inexpensive system.     

NITRATE TRANSFORMATIONS IN SOUTHERN ONTARIO STREAM SEDIMENTS1

The transformation of nitrate was investigated in diverse stream sediments from six areas of Southern Ontario, Canada. Laboratory Experiments conducted with intact 0-5 cm depth sediment cores overlain with aerated 5 mg/l nitrate-N solution reveald considerable nitrate depletion during a six-day period as a resuit of denitrification and nitrate reduction to ammonium. Nitrification and ammonification also occurred simultaneously with nitrate reduction in many stream sediments. Mixed 0-5 cm depth sediments collected from 81 stream sites were used to examine the relationship between microbial nitrate removal and sediment characteristics. Rates of nitrate-N loss from aerated 5 mg/l nitrate-N solutions overlying these sediments ranged between 11 and 171 mg/m²/day for a 24-hour incubation period. Rates of nitrate loss for the 24-hour period exhibited a significant positive correlation (r=0.72) with sediment ammonium content. Organic carbon, total nitrogen and sediment texture also had significant but weak correlations with nitrate loss.     

Microcosm studies on anaerobic phosphate flux and mineralization of lake sediment organic carbon

Lake sediment has long been recognized as an important source of nutrients such as phosphorus. To gain a better understanding of phosphorus flux at the sediment-water interface, it is crucial to investigate the sediment porewater. There is also growing concern and interest in identifying whether organic-rich sediment is an important source of greenhouse gases such as CO(2) and CH(4). In the present study, we took sediment samples from West Lake, a shallow hypereutrophic lake in Hangzhou, Zhejiang Province, China and incubated subsamples under anaerobic conditions at 25 degrees C for 182 d using a specially designed microcosm that permits repeated extraction of sediment porewater and sampling of headspace gases. Anaerobic phosphate fluxes and mineralization of sediment organic carbon were measured. Average diffusive flux of soluble phosphorus was 0.81 mg P m(-2) d(-1) during the initial 18 d of incubation. Decomposition of sediment organic C followed zero-order reaction kinetics and methane accounted for about 50% of the mineralization products. The results suggest that organic-rich sediments can be important sources of P and methane under anaerobic conditions. Laboratory studies simulating field conditions and field studies are necessary to determine the contribution of sediment as a source of P and greenhouse gases.     

Estimating bulk density in vertically exposed stoney alluvium using a modified excavation method

Despite many decades of education and refining land-use practices, accelerated stream bank erosion is still prevalent in the United States. Eroding stream banks produce a sediment load to the riverine system and can cause reduced water quality as a result of increased suspended sediment. As total maximum daily loads (TMDLs) for water bodies impaired by turbidity or suspended sediments become more numerous, a simple, in situ field technique will be needed to estimate the bulk density of readily erodible stream bank material so that reasonably accurate sediment loading rates can be estimated. In this study, the excavation/polyurethane-foam technique for estimating total bulk density was applied to vertically exposed alluvium with high coarse-fragment content. Though not previously attempted in vertically exposed alluvium with high coarse-fragment content, the excavation/polyurethane-foam technique appears to provide a reasonably accurate estimate of the total and soil (<2-mm size fraction) bulk density from vertically exposed, alluvial deposits with high coarse-fragment content (i.e., >70%) along eroding stream banks. Obtaining bulk density estimates using this method would facilitate calculation of sediment loading rates to riverine systems with actual field data.     

Sediment amendment with Phoslock® in Clatto Reservoir (Dundee, UK): Investigating changes in sediment elemental composition and phosphorus fractionation

Lanthanum-modified bentonite clay (Phoslock(?) is a lake remediation tool designed to strip dissolved phosphorus (P) from the water column and increase the sediment P-sorption capacity. This study investigated short term alterations in sediment elemental composition and sediment P-fractions based on sediment cores taken 2 days before and 28 days following the application of 24 t of Phoslock? to a 9 ha, man-made reservoir. Following the application, sediment lanthanum (La) content increased significantly (p < 0.05; n = 4) in the top 8 cm of the sediment, thereby theoretically increasing sediment P-binding capacity on the whole reservoir scale by 250 kg. Mass balance calculations were used to estimate the theoretical binding of release-sensitive P (P(mobile); sum of 'labile P', 'reductant-soluble P' and 'organic P' fraction) by La across the top 4 cm and 10 cm depth of sediment. The amended mass of La in the sediment had the potential to bind 42% of P(mobile) present in the top 4 cm or 17% of P(mobile) present in the top 10 cm. However, with the exception of a significant increase (p<0.05; n=4) in the 'residual P' fraction in the top 2 cm, sediment P-fractions, including P(mobile,) did not differ significantly following the Phoslock? application. Experimental P-adsorption studies indicated P-saturation values for Phoslock? of 21,670 mg P kg?1 Phoslock?. Sequential extraction of P from saturated Phoslock? under laboratory conditions indicated that around 21% of P bound by Phoslock? was release-sensitive, while around 79% of bound P was unlikely to be released under reducing or common pH (5-9) conditions in shallow lakes. Applying Phoslock? is, therefore, likely to increase the P-sorption capacity of sediments under reducing conditions.