Sorption of aromatic compounds to clay mineral and model humic substance-clay complex: effects of solute structure and exchangeable cation

Clay minerals and humic substance (HS)-clay complexes are widely distributed in soil environments. Improved predictions on the uptake of organic pollutants by soil require a better understanding of fundamental mechanisms that control the relative contribution from organic and inorganic constituents. Five selected aromatic compounds varying in electronic structure, including nonpolar phenanthrene (PHEN), 1,2,4,5-tetrachlorobenzene (TeCB), polar 1,3-dinitrobenzene (DNB), 2,6-dichlorobenzonitrile (dichlobenil [DNL]), and 1-naphthalenyl methylcarbamate (carbaryl [CBL]), were sorbed separately from aqueous solution to Na(+)-, K(+)-, Cs(+)-, and Ca(2+)-saturated montmorillonites with and without the presence of dissolved HS at pH about 6. Upon normalizing for hydrophobic effects by solute aqueous solubility, the overall trend of sorptive affinity to HS-free K(+)-clay is DNB > DNL, CBL > PHEN, TeCB, indicating preferential adsorption of the polar solutes. With the presence of HS, sorption of PHEN, TeCB, and CBL increases by several times compared with the pure clay, attributed to HS-facilitated hydrophobic partition (PHEN and TeCB) or H-bonding (CBL). The enhanced sorption of PHEN by HS is cation dependent, where Cs(+) shows the strongest facilitative effect. Coadsorption of HS does not affect sorption of DNB and DNL to clays except that of DNB to Ca(2+)-clay because cation-dipole interactions between the polar group (NO(2) or CN) of solute and weakly hydrated exchangeable cations dominate the overall sorption.     

Sorption interactions between imazaquin and a humic acid extracted from a typical Brazilian oxisol

Soil sorption of most hydrophobic organic compounds (e.g., nonpolar pesticides) is directly related to soil organic matter (SOM) content. Humic substances are the major SOM components, containing carboxylic, phenolic, amine, quinone, and other functional groups, and specific structural configurations. In this paper, sorption interactions between imazaquin (2-[4,5-dydro-4-methyl-4-(1-methylethyl)-5-oxo-1H- imidazol-2-yl]-3-quinoline-carboxylic acid) herbicide (IM) and a humic acid (HA) extracted from a typical Brazilian Oxisol were studied with electron paramagnetic resonance (EPR) and Fourier-transform infrared (FTIR) spectroscopic techniques. A polarographic technique was used to quantify sorption. The IM amount sorbed on the HA was much higher than that on the whole soil within the pH range studied, emphasizing the prominent role played by SOM on IM sorption. Moreover, IM sorption increased as the soil-solution pH decreased. This enhancement in sorption was attributed to the hydrophobic affinity of the herbicide by the HA and to the electrostatic interaction between the protonated quinoline group of IM and the negative sites of the HA. Hydrophobic regions in the HA's interior at low pH (< 5.0) were recently demonstrated by an EPR detectable spin-label molecule. The FTIR and EPR spectroscopy and polarography data indicated weak interaction between IM and the soil and its HA, involving hydrogen bonding, proton transfer, and cation exchange (at low pH), and mainly hydrophobic interactions. However, no strong reaction mechanism, such as charge transfer, was involved. In addition, this research suggested that soil amendment with organic material might increase magnitude of IM sorption, consequently avoiding leaching and carryover problems usually found for mobile and persistent herbicides such as imazaquin.     

A laboratory study of bacteria-facilitated cadmium transport in alluvial gravel aquifer media

Colloids, including bacteria, can dramatically accelerate the transport of heavy metals in ground water. Batch and column experiments were conducted to investigate adsorption of cadmium (Cd) onto Bacillus subtilis spores or Escherichia coli vegetative cells and Cd transport in alluvial gravel aquifer media in the presence of these bacteria. Results of the batch experiments showed that adsorption of Cd onto the bacteria was (i) positively related to solution pH, bacterial concentration, and negative surface charge, but inversely related to Cd concentration and (ii) a rate-limited nonlinear process, but adsorption onto E. coli was much less. For column influent Cd concentrations of about 4 mg/L and bacterial concentrations of > or = 10(5) colony-forming units (cfu)/mL, there was a significant increase in total Cd effluent concentrations. In comparison with controls that did not have bacteria-facilitated transport, Cd traveled 17 to 20 times faster when it traveled with mobile bacteria. However, Cd traveled mostly 2 to 3 times slower during the desorption phase under the influence of bacteria retained in the column. The difference between total and dissolved Cd concentrations was significant during Cd cotransport with B. subtilis spores, but this concentration difference was very small during Cd cotransport with E. coli, suggesting an adsorption-dominant mechanism during Cd cotransport with the spores and the possibility of Cd chelation by the dissolved membrane vesicles secreted from E. coli cell walls. Bacteria-facilitated transport of heavy metals may pose a threat to ground water quality in sites such as landfills and following land disposal of industrial and domestic effluent and sludge.     

Sorption of sulfonamide pharmaceutical antibiotics on whole soils and particle-size fractions

Residues of pharmaceutical antibiotics are found in the environment, whose fate and effects are governed by sorption. Thus, the extent and mechanisms of the soil sorption of p-aminobenzoic acid and five sulfonamide antibiotics (sulfanilamide, sulfadimidine, sulfadiazine, sulfadimethoxine, and sulfapyridine) were investigated using topsoils of fertilized and unfertilized Chernozem and their organic-mineral particle-size fractions. Freundlich adsorption coefficients (K(f)) ranged from 0.5 to 6.5. Adsorption increased with aromaticity and electronegativity of functional groups attached to the sulfonyl-phenylamine core. Adsorption to soil and particle-size fractions increased in the sequence: coarse silt < whole soil < medium silt < sand < clay < fine silt and was influenced by pH. Sorption nonlinearity (1/n 相似文献   

Oxytetracycline sorption to organic matter by metal-bridging

The sorption of oxytetracycline to metal-loaded ion exchange resin and to natural organic matter by the formation of ternary complexes between polyvalent metal cations and sorbent- and sorbate ligand groups was investigated. Oxytetracycline (OTC) sorption to Ca- and Cu-loaded Chelex-100 resin increased with increasing metal/sorbate ratio at pH 7.6 (OTC speciation: 55% zwitterion, 45% anion). Greater sorption to Cu- than Ca-loaded resin was observed, consistent with the greater stability constants of Cu with both the resin sites and with OTC. Oxytetracycline sorption to organic matter was measured at pH 5.5 (OTC speciation: 1% cation, 98% zwitterion, 1% anion). No detectable sorption was measured for cellulose or lignin sorbents that contain few metal-complexing ligand groups. Sorption to Aldrich humic acid increased from "clean" < "dirty" (no cation exchange pretreatment) < Al-amended < Fe(III)-amended clean humic acid with K(d) values of 5500, 32000, 48000, and 250000 L kg(-1) C, respectively. Calcium amendments of clean humic acid suggested that a portion of the sorbed OTC was interacting by cation exchange. Oxytetracycline sorption coefficients for all humic acid sorbents were well-correlated with the total sorbed Al-plus-Fe(III) concentrations (r(2) = 0.87, log-log plot), suggesting that sorption by ternary complex formation with humic acid is important. Results of this research indicate that organic matter may be an important sorbent phase in soils and sediments for pharmaceutical compounds that can complex metals by the formation of ternary complexes between organic matter ligand groups and pharmaceutical ligand groups.     

Molecular-level investigation of monoaromatic compound sorption to suspended soil particles by deuterium nuclear magnetic resonance

Molecular-level sorption behavior of monoaromatic compounds in suspensions of water-dispersable clay components was studied by measuring 2H nuclear magnetic resonance (NMR) spin-spin relaxation times (T2). In general, decreased T2 values indicate stronger solute-sorbent interactions and increased sorption of the solute. A decreasing trend for T2 values in the order benzene > fluorobenzene > toluene (-C6D5 moiety) was observed, which was probably caused by the hydrophobic effect. The T2 values for benzene and the -C6D5 moiety of toluene increased with increasing pH, whereas the trend with pH was much weaker and less consistent for fluorobenzene and the methyl group of toluene. Conversely, no clear relationship was found between T2 values and pH for dichloromethane. These contrasting results cannot be explained by the pH-dependent self-assembly and hydrophobicity of humics. Instead, directed specific forces, including hydrogen bonding, cation-pi interactions, and aromatic-aromatic interactions, are proposed between the benzene ring of monoaromatic solutes and soil organic matter (SOM). Substituents of benzene affect these interactions by varying the pi electron density. When the soil fraction was treated with NaOH to remove humic and fulvic acids, T2 values for the different monoaromatic solutes were surprisingly lower compared with those for the untreated soil fraction. This result is probably caused by the increased ratio of solutes adsorbed to "hard" or "glassy" SOM components, which leads to less mobile sorbed solute molecules, after removing NaOH-extractable humics that contain more "soft" or "rubbery" SOM components.     

Removal of Se(IV) from aqueous solution using sulphuric acid-treated peanut shell

A carbonaceous sorbent was prepared from peanut shell via sulphuric acid treatment. Se(IV) removal from aqueous solution on the sorbent was studied varying time, pH, Se(IV) concentration, temperature and sorbent status (wet and dry). Se(IV) removal was faster using the wet sorbent than the dry sorbent following a pseudo-first-order model. Se(IV) removal increases at low pH values, and decreases as pH increases until pH 7. Sorption was found to fit the Langmuir equation and sorption capacity for the wet sorbent was higher than that for the dry one. Both sorbents showed an increased selenium sorption by rising the temperature. Redox processes between Se(IV) and the carbon sorbent are involved. Analysis by scanning electron microscope and X-ray powder diffraction for the sorbent after the reaction with acidified Se(IV) confirmed the availability of elemental selenium as particles on the sorbent surface as a result of Se(IV) reduction. Physicochemical tests showed an increase in sorbent acidity, cation exchange capacity (CEC) and surface functionality after the reaction with acidified Se(IV), indicating the oxidation processes occurring on the sorbent surface. Due to its reduction properties, the sorbent seems efficient for Se(IV) removal from aqueous solution.     

On the interaction mechanisms of atrazine and hydroxyatrazine with humic substances

Atrazine (6-chloro-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) is retained against leaching losses in soils principally by sorption to organic matter, but the mechanism of sorption has been a matter of controversy. Conflicting evidence exists for proton transfer, electron transfer, and hydrophobic interactions between atrazine and soil humus, but no data are conclusive. In this paper we add to the database by investigating the role of (i) hydroxyatrazine (6-hydroxy-N2-ethyl-N4-isopropyl-1,3,5-triazine-2,4-diamine) and (ii) hydrophobicity in the sorption of atrazine by Brazilian soil humic substances. We demonstrate, apparently for the first time, that hydroxyatrazine readily forms electron-transfer complexes with humic substances. These complexes probably are the cause of the well-known strong adsorption by humic acids and they may be the undetected cause of apparent electron-transfer complexes between soil organic matter and atrazine, whose transformation to the hydroxy form is facile. We also present evidence that supports the important contribution of hydrophobic interactions to the pH-dependent sorption of atrazine by humic substances.     

Sorption of apolar aromatic compounds to soil humic acid particles affected by aluminum(III) ion Cross-Linking

Sorption of hydrophobic compounds in soils often shows nonlinearity, competition, and hysteresis. Since such behaviors have been associated with organic polymers in glassy state, it has been postulated that some forms of soil humic substances are glassy. The glassy state is favored by properties that decrease the flexibility of macromolecules, such as cross-linking, presence of unsaturated bonds, and high molecular weight. Polyvalent metal ions, which are abundant in soils, may cross-link humic substances by coordinating to multiple functional groups on different strands. Accordingly, we prepared an Al(3+)-cross-linked humic acid (Al-HA) from the H(+) form (H-HA) of a soil humic acid by a flocculation technique that leaves Al ions bound to organic groups. Sorption of naphthalene and 1,2,4-trichlorobenzene (TCB) on H-HA was nonlinear, competitive, and slightly hysteretic, in agreement with previous studies showing glass transition temperatures of humic acids that lie above room temperature. Nonlinearity, competition, and hysteresis were all enhanced in Al-HA, validating the hypothesis that metal ion cross-linking enhances nonideal sorption. Application of a glassy polymer sorption model reveals that cross-linking increases the affinity of solutes for the hole domain relative to the dissolution domain. The results (i) indicate that isolated, purified soil humic acid behaves like a glassy solid, (ii) indicate that metal-ion cross-linking creates a more rigid-chain structure and supports a link between nonideal sorption and the glassy character of soil organic matter, and (iii) underscore the importance of metal ions on humic structure in relation to sorption of hydrophobic organic compounds.     

Interactions of carbamazepine in soil: effects of dissolved organic matter

Pharmaceutical compounds (PCs) and dissolved organic matter (DOM) are co-introduced into soils by irrigation with reclaimed wastewater. We targeted carbamazepine (CBZ) as a model compound to study the tertiary interactions between relatively polar PCs, DOM, and soil. Sorption-desorption behavior of CBZ was studied with bulk clay soil and the corresponding clay size fraction in the following systems: (i) without DOM, (ii) co-introduced with DOM, and (iii) pre-adsorption of DOM before CBZ introduction. Sorption of the DOM to both sorbents was irreversible and exhibited pronounced sorption-desorption hysteresis. Carbamazepine exhibited higher sorption affinity and nonlinearity, and a higher degree of desorption hysteresis with the bulk soil than the corresponding clay size fraction. This was probably due to specific interactions with polar soil organic matter fractions that are more common in the bulk soil. Co-introduction of CBZ and DOM to the soil did not significantly affect the sorption behavior of CBZ; however, following pre-adsorption of DOM by the bulk soil, an increase in sorption affinity and decrease in sorption linearity were observed. In this latter treatment, desorption hysteresis of CBZ was significantly increased for both sorbents. We hypothesize that this was due to either strong chemical interactions of CBZ with the adsorbed DOM or physical encapsulation of CBZ in DOM-clay complexes. Based on this study, we suggest that DOM facilitates stronger interactions of polar PCs with the solid surface. This mechanism can reduce PC desorption ability in soils.     

Assessment of spent mushroom substrate as sorbent of fungicides: influence of sorbent and sorbate properties

The capacity of spent mushroom substrate (SMS) as a sorbent of fungicides was evaluated for its possible use in regulating pesticide mobility in the environment. The sorption studies involved four different SMS types in terms of nature and treatment and eight fungicides selected as representative compounds from different chemical groups. Nonlinear sorption isotherms were observed for all SMS-fungicide combinations. The highest sorption was obtained by composted SMS from Agaricus bisporus cultivation. A significant negative and positive correlation was obtained between the K(OC) sorption constants and the polarity index values of sorbents and the K(OW) of fungicides, respectively. The statistic revealed that more than 77% of the variability in the K(OW) could be explained considering these properties jointly. The other properties of both the sorbent (total carbon, dissolved organic carbon, or pH) and the sorbate (water solubility) were nonsignificant. The hysteresis values for cyprodinil (log K(OW)= 4) were for all the sorbents much higher (>3) than for other fungicides. This was consistent with the remaining sorption after desorption considered as an indicator of the sorption efficiency of SMS for fungicides. Changes in the absorption bands of fungicides sorbed by SMS observed by FTIR permitted establishing the interaction mechanism of fungicides with SMS. The findings of this work provide evidence for the potential capacity of SMS as a sorbent of fungicides and the low desorption observed especially for some fungicides, although they suggest that more stabilized or humified organic substrates should be produced to enhance their efficiency in environmental applications.     

Factors controlling sorption of prosulfuron by variable-charge soils and model sorbents

Prosulfuron [1-(4-methoxy-6-methyltriazin-2-yl)-3-[2-(3,3,3-trifluoropropyl) phenylsulfonyl]-urea), a relatively new sulfonylurea herbicide, is a weak acid (pK(a) 3.76), and therefore, will undergo pH-dependent speciation and sorption. Understanding prosulfuron sorption in soils is important for predicting its environmental fate. Soil and solution factors controlling sorption were investigated by measuring prosulfuron sorption on five model sorbents (amorphous silica, alpha-alumina, CaSWy1 montmorillonite, commercial humic acid, and anion exchange resin) and 10 variable-charge soils from CaCl(2) and Ca(H(2)PO(4))(2) solutions as a function of pH and ionic strength. Anion exchange of prosulfuron accounted for up to 82% of overall sorption in the pH range from 3 to 7. The relative importance of anion exchange to prosulfuron sorption was positively correlated to the ratio of anion and cation exchange capacities. Comparison between organic carbon (OC)-normalized sorption (K(oc)) versus pH for humic acid and variable-charge soils show similar trends with sorption decreasing with increasing pH. However, K(oc) values estimated from variable-charge soils in the lower pH range where anion exchange has the greatest contribution to sorption was almost one log unit greater than that estimated from humic acid clearly exemplifying the impact of anion exchange. Similarity in K(oc)-pH curves for humic acid and variable-charge soils may result from the fact that (i) cation exchange capacity increases with increasing OC content, thus effective anion exchange capacity is reduced; and (ii) the relative contribution of hydrophobic and hydrophilic sorption mechanisms was fairly constant. Given that both hydrophilic and hydrophobic sorption of prosulfuron decrease with increasing pH, addition of fertilizer and lime amendments may enhance the potential for off-site leaching of recently applied acidic pesticides.     

Biosorption of heavy metals by activated sludge and their desorption characteristics

The biosorption of different metals (Cu2+, Cd2+, Zn2+, Ni2+ and Pb2+) was investigated using activated sludge. The optimum pH was 4 for Cd, Cu and Pb sorption and 5 for Ni and Zn. Biomass metal uptake clearly competed with protons present in the aqueous medium, making pH an important variable in the process. Protons consumed by biomass in control tests versus protons exchange in biosorption tests confirmed a maximum exchange between metal cations and protons at pH 2. The study of the influence of biomass concentration revealed that the amount of protons released from biomass increased with biomass concentration. This would confirm the hypothesis of ion exchange between both types of ions. The application of the Langmuir and Freundlich models showed a better fitting of experimental data to the first model. The maximum sorption uptake of the studied metals by the activated sludge showed the following decreasing order: Pb>Cu>CdZn>Ni. Desorption experiments showed that HCl was a good eluent for the five metals tested, particularly at low pH values (1 and 2). At pH 3 or 4 the desorption yield was significantly lower. However, its use did not allow the reuse of biomass in subsequent loading and unloading cycles. EDTA was also a good desorption agent, achieving the total recovery for the five metals tested at a concentration of 1mM, with the advantage that biomass could be reused for three sorption-desorption cycles.     

Cadmium solubility and sorption in a long-term sludge-amended arable soil

Cadmium solubility and sorption in an arable clay loam soil that had received sewage sludge for 41 years were compared to an unsludged control in batch studies. Soil pH dominated Cd sorption, explaining >92% of the variation in Kd values in both treatments. At any pH, Cd sorption was apparently slightly but significantly (p < 0.05) smaller in the sludge-amended soil compared to the control, even though the organic carbon content was 70% larger and the ammonium oxalate-extractable iron content was roughly doubled. Correction for dissolved organic carbon (DOC) complexation with the speciation model WHAM reduced the difference in sorption between treatments, but the sludged soil still had significantly smaller Kd values (p < 0.01). Batch equilibrations without addition of Cd showed that there was no significant difference in the solubility of "native" cadmium (defined as EDTA-extractable Cd) in sludged and control soils. The reason for the lack of increase in Cd sorption in the sludge-amended soil has not been established, but it may be due to competition for sorption sites on humic compounds with sludge-derived Fe and trace metals such as zinc. The fact that the pyrophosphate-extractable (i.e., organically associated) iron content was seven times larger in the sludged soil provides some supporting evidence for this hypothesis.     

Kinetic research on the sorption of aqueous lead by synthetic carbonate hydroxyapatite

The sorption of aqueous lead on carbonate-hydroxyapatite (CHAp) is a complicated non-homogeneous solid/water reaction, which from the kinetic point of view has two stages. In the first stage, the reaction rate is so fast and the kinetic pathway so intricate that further research is required. In the second stage, the reaction rate slows down and the reaction process follows that of a first-order kinetic equation. Experimental results show that the relationship between the reaction rate constant k(1) and temperature T agrees with the Arrhenius equation, and that the activation energy of sorption (E(a)) is 11.93 kJ/mol and the frequency factor (A) is 2.51/s. The reaction rate constant k(1) increases with the Pb(2+) initial concentration and decreasing pH, but with increasing CHAp dosage. X-ray diffraction (XRD), scanning electron microscopy with energy dispersion spectrum (SEM-EDS) and toxicity characteristic leaching procedure (TCLP) tests indicate that the main sorption mechanism is dissolution-precipitation, in conjunction with surface sorption.     

The influence of lipids on the energetics of uptake of polycyclic aromatic hydrocarbons by natural organic matter

Although most of the organic carbon in soils and sediments may be composed of humic substances, their interaction with other compounds, especially their sorption interactions, may be significantly affected by the presence of small amounts of the other components of natural organic matter (NOM). In this investigation, the influence of the lipid fraction of NOM on the sorption thermodynamics of fluorene, phenanthrene, and pyrene to several geosorbent samples was examined before and after extraction of lipids. Batch experiments were performed at the same concentration for all polycyclic aromatic hydrocarbons (PAHs) (0.025 x their solubility in water) at different temperatures (10, 20, 30, and 40 degrees C), and the thermodynamic parameters were calculated. Removal of the lipids increases the sorption capacity of the samples as well as the exothermicity of the process. The free energy change was negative for all the samples and no significant differences were noticed on lipid removal. The entropy changes were small and positive for the whole geosorbent samples, but even smaller or more negative when the lipids were removed. This indicates that the interaction of PAHs with soils and sediments in the absence of extractable lipids is stronger and the mechanisms involved may be different, changing from a partitioning-like mechanism to specific adsorption. Because of the competition between lipids and PAHs for the same sorption sites, the lipids can be viewed as an "implicit sorbate."     

The role of lipids on sorption characteristics of freshwater- and wastewater-irrigated soils

The soil lipid fraction can play an important role in the sorption of organic compounds. In this study, the impact of the lipid fraction of freshwater- and wastewater-irrigated soils on the sorption of non- and relatively polar compounds was assessed. Lipid analyses revealed a clear difference between the two lipid fractions. The lipid extract from the wastewater-irrigated soil was consistent with mainly straight paraffinic chain materials; the lipid extract from freshwater-irrigated soil, on the other hand, exhibited stronger signals of aromatics, double bonds, ester, ether, and methyl, in addition to a smaller contribution from methylene protons. Our data suggest that lipid removal induced a stronger increase in the soil's sorption affinity for solutes capable of polar interactions such as atrazine (2-chloro-4-ethylamino-6-isopropylamino-1,3,5-triazine) and chlorotoluron (N'-(3-chloro-4-methylphenyl)-N,N-dimethylurea) as compared to phenanthrene. Moreover, the level of increase in sorption affinities due to lipid removal was much higher for the freshwater-irrigated soil than for its wastewater-irrigated counterpart, even though the level of lipids in the freshwater-irrigated soil was half that in the wastewater-irrigated one (6 vs. 11% of the total organic C). The higher level of polar functionalities, such as ether and ester moieties, in the lipid fraction from the freshwater-irrigated soil suggests that these extractable compounds compete successfully with the polar solutes (atrazine and chlorotoluron) for specific binding sites in the soil organic matter (SOM). It appears that the composition of the lipid fraction may be a key consideration in unraveling the sorption of organic molecules in soils.     

Platinum (IV) recovery from chloride solution by functionalized acrylic copolymers

Two acrylic adsorbents with different morphological structures and bearing amidoethylenamine and thiol groups were obtained and used for platinum sorption from chloride solution by the batch method. Physico-chemical parameters that influence adsorption such as initial Pt(IV) concentration, stirring time, pH, and adsorbent amount were investigated. The thermodynamic parameters of Pt(IV) sorption on the synthesized adsorbent were also evaluated based on Langmuir and Freundlich isotherms. Thermodynamic parameters estimated from Langmuir constants indicated that the adsorption is spontaneous, exothermic and there is a disordered state at the molecular level. The models used to analyze the sorption rate led to the conclusion that the most important step in the sorption of Pt(IV) could be both particle diffusion and chemical reaction of [PtCl₆]⁻ with amine functional groups. Thus, both the ion exchange and complex formation mechanisms can occur via nitrogen atoms in the recovery of Pt(IV) on the studied adsorbent.     

Sorption of the antibiotic tetracycline to humic-mineral complexes

Humic substances, by altering the surface properties and/or competing for available reaction sites, can either suppress or promote sorption of organic compounds to mineral surfaces. Limited literature evidence points to the reduction in sorption of the antibiotic tetracycline to clay minerals in the presence of humic substances. We investigated the surface interaction of Elliott soil humic acid (ESHA) with hydrous Al oxide (HAO) and the effect of this association on tetracycline sorption. Strong interaction between ESHA and HAO led to ESHA-promoted dissolution of HAO and surface charge reversal. The ESHA-HAO sorption-desorption isotherms were successfully described using a modified Langmuir model that accounted for the heterogeneity of HAO surface and ESHA. Ligand exchange was proposed as the major interaction mechanism, and the edge Al atoms on HAO surface were considered as the sorption sites for ESHA macromolecules. ESHA was coated onto HAO to achieve two different organic content (foc) levels of 0.81 and 1.52%. Sorption results were compared for the binary ESHA-tetracycline and HAO-tetracycline systems, and the ternary ESHA-HAO-tetracycline system. The coating of ESHA on HAO significantly suppressed tetracycline sorption levels, attributable to altered HAO surface charge characteristics and/or direct competition between ESHA and tetracycline for potential sorption sites. Higher foc level, besides increasing the extent of sorption suppression, also resulted in greater ionic strength dependence and increased nonlinearity of sorption behavior. It, therefore, appears that the presence of humic substances, in both dissolved and mineral-bound forms, is likely to increase the environmental mobility of tetracycline compounds.     

Soil sorption of acidic pesticides: modeling pH effects

A model of acidic pesticide sorption in soils was developed from theoretical modeling and experimental data, which initially considered a combination of a strongly acidic pesticide and a variable-charge soil with high clay content. Contribution of 2,4-D [(2,4-dichlorophenoxy) acetic acid] anionic-form sorption was small when compared with molecular sorption. Dissociation of 2,4-D was not sufficient to explain the variation in Kd as a function of pH. Accessibility of soil organic functional groups able to interact with the pesticide (conformational changes) as a function of organic matter dissociation was proposed to explain the observed differences in sorption. Experimental 2,4-D sorption data and K(oc) values from literature for flumetsulam [N-(2,6-difluorophenyl)-5-methyl [1,2,4] triazolo [1,5-a] pyrimidine-2-sulfonamide] and sulfentrazone [N-[2,4-dichloro-5-[4-(difluromethyl)-4,5-dihydro-3-methyl-5-oxo-1H-1,2,4-triazol-1-yl] phenyl] methanesulfonamide] in several soils fit the model.