Future waste treatment and energy systems – examples of joint scenarios

Development and use of scenarios for large interdisciplinary projects is a complicated task. This article provides practical examples of how it has been carried out in two projects addressing waste management and energy issues respectively. Based on experiences from the two projects, recommendations are made for an approach concerning development of scenarios in projects dealing with both waste management and energy issues. Recommendations are given to develop and use overall scenarios for the project and leave room for sub-scenarios in parts of the project. Combining different types of scenarios is recommended, too, in order to adapt to the methods and tools of different disciplines, such as developing predictive scenarios with general equilibrium tools and analysing explorative scenarios with energy system analysis tools. Furthermore, as marginals identified in differing future background systems determine the outcomes of consequential life cycle assessments (LCAs), it is considered advisable to develop and use explorative external scenarios based on possible marginals as a framework for consequential LCAs. This approach is illustrated using an on-going Danish research project.     

Behaviour and opinions concerning a mandatory newspaper recycling programme: A statistical correlation analysis

Source-separation recycling of municipal waste is becoming increasing popular in the USA and Canada, but little is known concerning the behaviour and opinions of residents subject to recycling programmes. Residents of a Pennsylvania county subject to a mandatory newspaper recycling programme in 1985 were surveyed in 1986 concerning their behaviour and opinions with respect to that programme. Survey responses were analysed by Pearson correlation and other statistical methods. Among the conclusions of that analysis are the following: The use of drop-off sites did not decrease recycling rates; Newspaper publicity can increase recycling rates; Larger households required more time than smaller for recycling compliance; Willingness to recycle additional materials decreases as time spent on current recycling activities increases.     

Carbon--making the right choice for waste management in developing countries

Due to initiatives such as the clean development mechanism (CDM), reducing greenhouse gas emissions for a developing country can offer an important route to attracting investment in a variety of qualifying project areas, including waste management. To date CDM projects have been largely confined to schemes that control emission from landfill, but projects that avoid landfilling are beginning to be submitted. In considering the waste options which might be suitable for developing countries certain ones, such as energy from waste, have been discounted for a range of reasons related primarily to the lack of technical and other support services required for these more sophisticated process trains. The paper focuses on six options: the base case of open dumping; three options for landfill (passive venting, gas capture with flaring, and gas capture with energy production), composting and anaerobic digestion with electricity production and composting of the digestate. A range of assumptions were necessary for making the comparisons based on the effective carbon emissions, and these assumptions will change from project to project. The highest impact in terms of carbon emissions was from using a sanitary landfill without either gas flaring or electricity production; this was worse than the baseline case using open dumpsites. Landfills with either flaring or energy production from the collected gas both produced similar positive carbon emissions, but these were substantially lower than both open dumping and sanitary landfill without flaring or energy production. Composting or anaerobic digestion with energy production and composting of the digestate were the two best options with composting being neutral in terms of carbon emissions and anaerobic digestion being carbon negative. These generic conclusions were tested for sensitivity by modifying the input waste composition and were found to be robust, suggesting that subject to local study to confirm assumptions made, the opportunity for developing CDM projects to attract investment to improved waste management infrastructure is significant. Kyoto credits in excess of 1 tCO2e/t of waste could be realised.     

Systematic planning for Triad projects

This article examines specific systematic planning steps that can be used for designing and controlling Triad projects. Triad work strategies act to limit decision uncertainty, expedite schedules to meet project milestones, and reduce costs associated with cleanup activities. As a result, the Triad approach is rapidly increasing in popularity. Good project planning has always been seen as the cornerstone of successful Triad projects. However, the specific steps in the systematic planning process have not been extensively published. Demands of Triad projects, which attempt to make maximum use of innovative technologies and sequencing of activities in a learn‐ as‐you‐go framework, put new demands on regulators and project managers alike. Specific activities and relationships are identified to assist project managers with dynamic work strategies and real‐time measurements to support improved decision making. These include: assembly of stakeholders, a core technical team, and key decisions; development and refinement of a site model; use of demonstrations of methods applicability; development of dynamic work strategies and project sequencing; real‐time data management assessment and presentation; and unitized procurement of technologies and services. © 2004 Wiley Periodicals, Inc.     

我国垃圾焚烧发电CDM项目开发难点与实践分析

基于我国目前垃圾焚烧发电CDM项目的开发现状,从不同的角度比较和分析了该类项目的特点,总结了其项目公示阶段出现的问题并对方法学修正内容进行了说明。同时,以实际项目为例,着重探讨了额外性论证中的投资比较分析、普及性分析等难点问题,最终得出结论并提出建议。     

电厂建设运行中的水土流失预测与水土保持设计

在燃煤电厂建设运行的同时,将引起一系列的水土流失问题.以四川国电金堂电厂二期扩建工程为例,简要说明项目区水土流失预测的内容和方法,并在其基础上对可能产生的水土流失和危害进行了分析,同时介绍了建设期和运行期采取的综合防治措施,为类似工程的水土保持提供借鉴.     

Exploring the clean development mechanism: Malaysian case study.

During 2006 the CDM market in Malaysia became established and by December 2007 a total of 20 Malaysian projects had registered with the CDM Executive Board. The Kyoto Protocol defines the Annex 1 countries, as countries that are obliged to reduce their greenhouse gas (GHG) emissions and the clean development mechanism (CDM) allows Annex 1 countries to develop projects, which contribute to emission reduction, in non-Annex 1 (developing) countries. Currently, two projects have been corrected due to request for review and there is one project for which review is requested. Two projects have been rejected by the Executive Board. The broad knowledge of CDM in Malaysia and the number of successful projects are partly due to the well-functioning CDM institutional framework in Malaysia. As an illustration this article focuses on a Malaysian-Danish project and describes the implementation of CDM in Malaysia and refers to this specific project. The project was registered with the CDM Executive Board in May 2007 and is a methane avoidance project in which methane is captured from a landfill and used to generate electricity.     

Economic Project Risk Assessment in Remediation Projects Prior to Construction: Methodology Development and Case Study Application

Probabilistic economic analysis, including uncertainty of probabilities and consequences of project risks, is not widely used in remediation projects. This article presents a project risk assessment (PRA) method to identify, quantify, and analyze risks in remediation projects. The suggested method is probabilistic and includes uncertainty analysis of input variables based on expert judgment. It was originally developed as a part of a sustainability assessment tool, but is viable as a stand‐alone tool for remediation projects. The method is applied to a case study: a former paint factory that is being redeveloped into a residential area. The PRA method is used for analyzing and comparing the project risks associated with four remediation options, all including excavation but with different degrees of onsite treatment. The result of the case study application shows which alternative has the lowest mean risk cost, the highest probability to have the lowest risk cost, and how the risk costs are distributed, but also, importantly, helps the user to prioritize between risk‐reduction measures. ©2015 Wiley Periodicals     

Perspective and trends in the environmental remediation industry

The approach to management and execution of remediation projects has changed drastically over the past decade, as remedial project managers have begun to understand and accept the numerous environmental regulations developed in the mid-1980s. For example, the adversarial relationship that once existed between regulators and owners has become more cooperative. This article documents trends over time in remediation project practices and quantifies the impact these trends have had on the cost and schedule performance of projects. Proven successful practices are highlighted, and those with the potential for improving project performance further are also discussed.     

The trade-off between assessment and cleanup phases of remediation projects

Based on actual project experiences over the past decade, execution strategies for remediation projects have varied significantly. For example, the overlap between the assessment and cleanup phases can range from none (for projects that complete assessment activities before starting the cleanup) to almost half of the assessment duration (for projects that may be under pressure to show progress at the site). This article quantifies the relationship between remediation project execution strategies, project definition components, and remediation project cost and schedule performance. By relating project outcomes to indicators that can be monitored early in the project cycle, project teams may be able to correct problems before they affect the ultimate performance of the remediation project.     

Best management practices for environmental restoration programs

Based on a review of hundreds of environmental restoration program optimization reviews, this article describes management tools found in successful and efficient remediation programs. Projects that consistently struggled to achieve their objectives were observed to be missing certain, or to have inadequately used, these tools. The tools are articulated as best practices because when they are present and actively used, project shortcomings were minimal. Priority objectives for site owners and project managers include improving efficiency and effectiveness through performance management, reducing resource usage and energy consumption, ensuring protectiveness, and reducing uncertainty in management decision making. Restoring environmental resources damaged by historic waste management practices began in earnest in the late 1960s and early 1970s with the broad recognition of the problems caused by environmental discharges and spills when wastes are not managed appropriately. Under new regulations, soil and groundwater remediation projects could be, and were, conducted within a defined framework. The number and variety of restoration projects that were launched resulted in a slew of projects progressing through the stages of characterization, decision, and cleanup, and more were added to the cleanup process each year. In the 1990s, the Department of Defense noted that many cleanup efforts were projected to incur substantial operational, maintenance, and monitoring costs for decades into the future. This was correctly perceived as an opportunity to optimize those systems and programs, minimize costs, and reduce health and environmental risks. The best practices outlined in this article address management tools that were identified in optimization efforts that led to effective and efficient environmental remediation projects. © 2010 Wiley Periodicals, Inc.     

脱硫工程项目后评估体系的研究

在论述脱硫工程项目后评估概念和特点的基础上,对后评估的主要内容和方法进行了深入的研究,认为脱硫工程项目的后评估在整个电厂建设后评估工作中占有非常重要的地位,需要在实践中不断总结、完善,建立更加符合国情的后评估理论和方法体系。     

MULTI-AXIAL TESTING OF GEOMEMBRANES

There are many accepted methods to ascertain the integrity of a geomembrane (GM) by subjecting it to a battery of physical, mechanical and chemical tests. However, there is no single comprehensive performance testing programme that simulates the stresses to which a GM might be subjected in a service environment. This paper first discusses the development and testing of a new test system based on multi-axial deformation; observations concerning system design criteria and relevance to field conditions are made. The paper also presents the results of a physical testing programme, wherein standard materials tests were implemented using the new system; stress/strain, strain rate, creep and relaxation data are presented. Where comparisons were possible, these results reinforced fluid-based multi-axial testing data in the literature. New data and conclusions are discussed. Finally, a new test, cyclic testing, is suggested, demonstrated and discussed.     

湿法脱硫工艺的拓展性创新与应用

结合工程实际,介绍了湿法脱硫技术的拓展性创新——“三炉一塔、一炉调峰”脱硫技术,在研究分析该技术的特殊性和难点的基础上,进行了有针对性的研究开发,提出了有效的设计思路和控制策略。     

The role of intergenerational influence in waste education programmes: the THAW project

Whilst the education of young people is often seen as a part of the solution to current environmental problems seeking urgent attention, it is often forgotten that their parents and other household members can also be educated/influenced via home-based educational activities. This paper explores the theory of intergenerational influence in relation to school based waste education. Waste Watch, a UK-based environmental charity (www.wastewatch.org.uk), has pioneered a model that uses practical activities and whole school involvement to promote school based action on waste. This methodology has been adopted nationally. This paper outlines and evaluates how effective school based waste education is in promoting action at a household level. The paper outlines Waste Watch's 'Taking Home Action on Waste (THAW)' project carried out for two and half years in Rotherham, a town in South Yorkshire, England. The project worked with 6705 primary age children in 39 schools (44% of primary schools in the project area) to enable them to take the "reduce, reuse and recycle message" home to their families and to engage these (i.e. families) in sustainable waste management practices. As well as substantial increases in students' knowledge and understanding of waste reduction, measurement of the impact of the project in areas around 12 carefully chosen sample schools showed evidence of increased participation in recycling and recycling tonnages as well as declining levels of residual waste. Following delivery of the project in these areas, an average increase of 8.6% was recorded in recycling set out rates which led to a 4.3% increase in paper recycling tonnages and an 8.7% increase in tonnages of cans, glass and textiles collected for recycling. Correspondingly, there was a 4.5% fall in tonnages of residual waste. Waste Watch's THAW project was the first serious attempt to measure the intergenerational influence of an education programme on behaviour at home (i.e. other than schools' own waste). It clearly shows that household recycling behaviour can be positively impacted by intergenerational influence via a practical school-based waste education model. However, although the model could potentially have a big impact if rolled out nationally, it will require seed funding and the long-term durability of the model has not yet been fully quantified.     

Composting projects under the Clean Development Mechanism: sustainable contribution to mitigate climate change

The Clean Development Mechanism (CDM) of the Kyoto Protocol aims to reduce greenhouse gas emissions in developing countries and at the same time to assist these countries in sustainable development. While composting as a suitable mitigation option in the waste sector can clearly contribute to the former goal there are indications that high rents can also be achieved regarding the latter. In this article composting is compared with other CDM project types inside and outside the waste sector with regards to both project numbers and contribution to sustainable development. It is found that, despite the high number of waste projects, composting is underrepresented and a major reason for this fact is identified. Based on a multi-criteria analysis it is shown that composting has a higher potential for contribution to sustainable development than most other best in class projects. As these contributions can only be assured if certain requirements are followed, eight key obligations are presented.     

国内外石化行业环境保护管理对比

介绍了我国石化行业环境保护法规、标准体系和建设项目环境保护工作的要求和开展情况,并对欧美发达国家石化行业的法规标准体系、工程建设全过程环境保护工作、成本效益分析、最佳可行技术和部分发展中国家石化项目的环境保护管理进行了分析论述,比较了国内外石化行业环境保护标准、项目环保工作的差异,并对我国石化行业环境保护工作给出了建议。     

Methods for evaluating investment strategies for environmental technologies

Environmental technology development, like other ventures, requires decisions regarding where to invest scarce capital. The investment option that offers the greatest benefit relative to the cost should be chosen. The problem is to determine a way to analyze the project and apply a useful measure for comparison to other investment opportunities. In this article, three methods of analysis are presented: return on investment, benefit-to-cost ratio, and payback period. Formulas are developed for each of the methods, and a case study illustrates their application.     

A Spanish model for quantification and management of construction waste

Currently, construction and demolition waste (C&D waste) is a worldwide issue that concerns not only governments but also the building actors involved in construction activity. In Spain, a new national decree has been regulating the production and management of C&D waste since February 2008. The present work describes the waste management model that has inspired this decree: the Alcores model implemented with good results in Los Alcores Community (Seville, Spain). A detailed model is also provided to estimate the volume of waste that is expected to be generated on the building site. The quantification of C&D waste volume, from the project stage, is essential for the building actors to properly plan and control its disposal. This quantification model has been developed by studying 100 dwelling projects, especially their bill of quantities, and defining three coefficients to estimate the demolished volume (CT), the wreckage volume (CR) and the packaging volume (CE). Finally, two case studies are included to illustrate the usefulness of the model to estimate C&D waste volume in both new construction and demolition projects.     

Overview on LFG projects in China

Since the first landfill gas (LFG) power plant in China was built in 1998, by now more than 10 years have passed. In this period the LFG utilization process has progressed greatly in China. An overall review of the process is presented in this paper, which includes the background of policies, the information about the approval procedure of LFG projects, and the theoretical methods used to estimate the amount of LFG’s generation. Detailed analysis on the project practice, such as LFG collection techniques, LFG utilization condition in China, is made. According to statistic data, before the end of 2008, 26 LFG power projects have been built and put into operation with total power capacity around 56.8 MW, and 2.234 million tons of carbon dioxide equivalent abatement has been achieved annually by all of these LFG projects. The future of LFG industry in China is expected that there is still considerable developing space for LFG utilization in the near coming years, however after 2012, the progress speed may slow down because of some adverse aspects, such as available landfill resource becomes scarce, new laws implemented in China might exclude Chinese landfills from future CDM activities, etc.