Measuring externalities of waste transfer stations in Israel using hedonic pricing

This study estimates the economic value of externalities related to waste transfer stations in Israel. Most externalities are associated with local disamenities experienced by residents living in close proximity to transfer stations - including noise, odor, litter, vermin, visual intrusion and any associated perceived discomfort. Following the mapping of all active transfer stations in Israel, problematic sites near residential areas were identified. Four of these sites were selected for detailed examination. The study involved estimating the economic value of disamenities using the Hedonic Price Method, which examines the impact of disamenities on property values. The results indicate that the maximum spatial extent of the impact occurs about 2.8km away from a transfer station with an increase of about $5000 in housing price for each additionalkm away from the site. Alternatively, an increase of 1% in the average distance of a house from the local transfer station is associated with a 0.06% rise in the price of the average house. These figures, representing the relationship between changes in environmental quality and property prices, indicate that transfer stations create externalities that should be taken into account in location and clean-up policies for transfer stations as well as in potential compensation policies.     

Estimating the public preferences for solid waste management programmes using choice experiments in Macao.

This paper reports on the potential to apply the choice experiment method to understand the public's preferences for solid waste management programmes in Macao. A random sample survey of 260 respondents in Macao was conducted during the summer in 2004. The survey data was analysed using conditional multinomial logit models. The study results indicate that Macao residents prefer: (1) waste segregation and recycling at source; (2) noise reduction during waste collection and transportation and (3) lower garbage fees. The study concludes that choice experiment is a reliable tool in the analysis of respondents' preferences for developing a suitable solid waste management programme in Macao.     

北京市废弃微型计算机主机物料系数测算研究

微型计算机作为《废弃电器电子产品回收处理管理条例》的首批目录产品,处理企业对其拆解处理将获得基金补贴。而微型计算机主机物料系数是基金补贴的重要依据之一。为了减少微型计算机主机物料系数与实际情况的偏差,北京市环保局委托中国家用电器研究院,在北京市3家处理企业中开展台式微型计算机主机进行拆解实验,对比分析了台式微型计算机电路板物料系数不同的计算方法,并提出物料系数计算方法和系数建议,为北京市废弃电器电子产品处理企业补贴审核提供依据和政策支撑。     

The role played by environmental factors in the integration of a transfer station in a municipal solid waste management system

Transfer stations are an integral part of present-day municipal solid waste management systems. The main criteria used to decide on the location of a transfer station has traditionally been the minimization of transport costs, since it is cheaper to transport great amounts of waste over long distances in large loads than in small ones. In this study, we are going to consider the environmental factor in order to compare the feasibility of using a transfer station integrated within a waste management system. Applying the Life Cycle Assessment technique will enable us to obtain an objective parameter that quantifies the environmental impact of transportation and of operating a transfer station. Taking the current rates of solid wastes generation in the Plana region of Castellón (Spain) as our starting point, in this study we compare the environmental costs involved in the process of taking municipal wastes directly to the nearest waste treatment facility, with those involved in a waste management system integrating a transfer station. Comparing these two cases, an average reduction of 16.8% in the environmental impact can be obtained when a transfer station is incorporated in the waste management system.     

Estimating the quantity of solid waste generation in Oyo, Nigeria.

The study established waste multipliers that could be used in conjunction with the population figure of a city to estimate the quantity of solid waste generation in the developing world. Oyo, a traditional city in Nigeria was the focus of the study. Two sets of data were collected. The first was the information on the socio-economic attributes of residents obtained from 648 households through questionnaires administered using a systematic random sampling technique. The second was the measurement of waste generated in 25% of the households for a week in each of the 12 months of the year. The study established that 23.3% of the residents surveyed have educational qualifications beyond secondary school, with 51.2% engaged in occupations requiring very little or no formal education and 50.9% were in the low-income group. The daily per capita solid waste generation was 0.129 kg. The highest (9.8%) and lowest (6.5%) of the annual quantities of waste were produced in October and February, respectively. Similarly, 20.2% of the weekly generation was produced on Saturday and the 10.2% produced on Thursday was the lowest. Animal dung, which accounted for 18.0%, constituted the highest component of the total solid waste generated. The study further established that the organic component of the waste generation was 75.4%. The results of the regression analysis R2 significant at 0.001 showed that income, household size, social status, occupation, education and season of the year explained 88.8% of waste generation in Oyo. It was established that 50.90 tonnes of solid waste was generated per day in the city in 2005, and the daily generation in the year 2008 is estimated to be 55.20 tonnes. The study concluded that with an average annual population growth of 13 000 people for the town, an additional 1.3 acres of land will need to be legally acquired annually, implying that 10.92-19.68 hectares ill be required as dump site(s) over the next 20-30 years.     

Estimating the demand for municipal waste compost via farmers' willingness-to-pay in Ghana

This paper has its primary focus on the analysis of perceptions and willingness-to-pay (WTP) for composted municipal solid and faecal waste among urban and peri-urban farmers and other potential compost users in Ghana. Participatory rural appraisal and contingent valuation methods (CVM) were used for the demand analysis. Most respondents were clear and firm in their responses to the principal question about WTP for compost, as well as in giving their views and perceptions about issues involved in demand for compost. The probit analysis proved valuable in highlighting variables, which explain variations in the WTP. The WTP analysis allowed the quantification of the compost demand under different scenarios of subsidized and non-subsidized compost production, with due allowance for a local reference price to cover compost station operating costs. The analysis revealed that the effective demand for compost for agricultural purposes is marginal and limited by farmers' transport costs. Only through the additional consideration of the demand of the construction sector can about 25% of the organic waste produced in Ghana's capital, Accra, be transformed and utilized. Public subsidies appear necessary and could be generated through savings in transport and disposal. Without subsidies, the challenge for an increased agricultural use is how to produce a low-cost but nutrient-rich compost, which can compete with abundant and cheap poultry manure and still achieve the price to maintain a compost station. The experience in Ghana shows that this is hardly possible except through private-public partnerships.     

余热电站系统中的水泥窑余热锅炉

主要介绍了应用于水泥窑余热电站系统中的余热锅炉的特点及在设计、应用中应注意的问题。     

Biodiesel production using waste frying oil

Waste sunflower frying oil is used in biodiesel production by transesterification using an enzyme as a catalyst in a batch reactor. Various microbial lipases have been used in transesterification reaction to select an optimum lipase. The effects of various parameters such as temperature, methanol:oil ratio, enzyme concentration and solvent on the conversion of methyl ester have been studied. The Pseudomonas fluorescens enzyme yielded the highest conversion. Using the P. fluorescens enzyme, the optimum conditions included a temperature of 45 °C, an enzyme concentration of 5% and a methanol:oil molar ratio 3:1. To avoid an inhibitory effect, the addition of methanol was performed in three stages. The conversion obtained after 24 h of reaction increased from 55.8% to 63.84% because of the stage-wise addition of methanol. The addition of a non-polar solvent result in a higher conversion compared to polar solvents. Transesterification of waste sunflower frying oil under the optimum conditions and single-stage methanol addition was compared to the refined sunflower oil.     

Estimating PAH sources in harbor sediments using diagnostic ratios

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the global environment and are subsequently transported into aquatic sediments. As PAHs are formed by various processes, source identification using diagnostic ratios can provide insight to PAH emission sources to distinguish between pyrogenic and petrogenic PAH sources. PAH diagnostic ratios were applied as a forensic source apportionment technique to assess aggregate historical sediment data from 31 small craft harbors (SCHs) across Nova Scotia, Canada. Multiple diagnostic ratios suggest that PAHs present in Nova Scotia SCH sediments are pyrogenic (combustion) in origin, while consistently suggesting that coal‐related PAH sources are potential dominant specific sources. National Institute of Standards and Technology Standard Reference Materials (SRMs) were used as reference for coal tar, urban dust, and diesel exhaust particulates in ratio applications. The SRM for coal tar was most similar to Nova Scotia SCH sediments in multiple ratio applications. Diagnostic ratio results were corroborated by comparing the PAH profile of sediments to source profiles from the literature. Results indicate that Nova Scotia SCH sediments follow global trends by exhibiting a dominant pyrogenic PAH signature, and the specific coal‐related PAH signature of Nova Scotia SCH sediments may be influenced by contamination inputs related to historical industrial coal mining and combustion activities in the province.     

Municipal solid waste landfill siting using intelligent system

Historically, landfills have been the dominant alternative for the ultimate disposal of municipal solid waste. This paper addresses the problem of siting a new landfill using an intelligent system based on fuzzy inference. The proposed system can accommodate new information on the landfill site selection by updating its knowledge base. Several factors are considered in the siting process including topography and geology, natural resources, socio-cultural aspects, and economy and safety. The system will rank sites on a scale of 0-100%, with 100% being the most appropriate one. A weighting system is used for all of the considered factors. The results from testing the system using different sites show the effectiveness of the system in the selection process.     

Conceptual modeling to optimize the haul and transfer of municipal solid waste

Two conceptual mixed integer linear optimization models were developed to optimize the haul and transfer of municipal solid waste (MSW) prior to landfilling. One model is based on minimizing time (h/d), whilst the second model is based on minimizing total cost (euro/d). Both models aim to calculate the optimum pathway to haul MSW from source nodes (waste production nodes, such as urban centers or municipalities) to sink nodes (landfills) via intermediate nodes (waste transfer stations). The models are applicable provided that the locations of the source, intermediate and sink nodes are fixed. The basic input data are distances among nodes, average vehicle speeds, haul cost coefficients (in euro/ton km), equipment and facilities' operating and investment cost, labor cost and tipping fees. The time based optimization model is easier to develop, since it is based on readily available data (distances among nodes). It can be used in cases in which no transfer stations are included in the system. The cost optimization model is more reliable compared to the time model provided that accurate cost data are available. The cost optimization model can be a useful tool to optimally allocate waste transfer stations in a region and can aid a community to investigate the threshold distance to a landfill above which the construction of a transfer station becomes financially beneficial. A sensitivity analysis reveals that queue times at the landfill or at the waste transfer station are key input variables. In addition, the waste transfer station ownership and the initial cost data affect the optimum path. A case study at the Municipality of Athens is used to illustrate the presented models.     

Multi-objective solid waste classification and identification model based on transfer learning method

Journal of Material Cycles and Waste Management - The rapid social development has given rise to a growing concern over environmental issues, one of which is the disposal of municipal solid waste....     

Numerical study of heat transfer characteristics of char from waste tire pyrolysis

To investigate heat transfer of char from waste tire pyrolysis, the cooling of char was simulated by the computational fluid dynamics. To scrutinize the heat transfer characteristics, bed height, temperature of cooling wall, and mixing time were selected as calculation parameters. From the results, increasing the char bed height from 0.005 to 0.02 m, the total heat transfer is decreased as from 45.5 to 26.5 J. As the char bed height is further increased from 0.02 to 0.06 m, the total heat transfer is decreased from 26.5 to 9.1 J. The char bed height affects the total heat transfer significantly. The total heat transfer decreases from 15.9 to 14.0 J as the temperature of cooling wall increases from 273.15 to 323.15 K. The total heat transfer mildly depends on the temperature of cooling wall. The particle mixing time increases from 10 to 120 s and the total heat transfer decreases from 28.6 to 22.6 J. It is noted that the particle contact is enhanced between char particles as well as the particles and cooling wall as the particle mixing time decreases. Consequently, heat transfer is augmented.     

Removal of batteries from solid waste using trommel separation

This paper describes the design and testing of a trommel for separation of batteries from solid waste. A trommel is a cylindrical separation device that rotates and performs size separation. It has also been used in areas such as municipal solid waste (MSW) processing, classifying construction and demolition debris, screening mass-burn incinerator ash and compost processing. A trommel has been designed based on size separation to separate household batteries from solid waste, which can then be used as feedstock for alternative applications of solid waste combustion, particularly where the metal content of the product is also a critical parameter, such as the Co-Co process for integrated cement and power production. This trommel has been tested with batches of university office and restaurant wastes against various factors. The recovery efficiency of batteries increases with decreasing inclination angle of the trommel and decreasing rotational speed. A physical characterization of the university solid waste has been performed with a 20-kg sample of the tested waste. It was found that there is a trend of decreasing recovery of batteries with increasing paper composition, and a trend of increasing recovery of batteries with increasing organic materials composition.     

Catalytic pyrolysis of car tire waste using expanded perlite

In this study, the non-catalytic and catalytic pyrolysis experiments were conducted on the sample of tire waste using expanded perlite as an additive material to determine especially the effect of temperature and catalyst-to-tire ratio on the products yields and the compositions and qualities of pyrolytic oils (NCPO and CPO). Non-catalytic studies, which were carried out under the certain conditions (a nitrogen flow of 100 mL/min and a heating rate of 10 °C/min), showed that the highest yield of pyrolytic oil (NCPO) was 60.02 wt.% at 425 °C. Then, the catalytic pyrolysis studies were carried out at catalyst-to-tire ratio range of 0.05-0.25 and the highest catalytic pyrolytic oil (CPO) yield was 65.11 wt.% at the ratio of 0.10 with the yield increase of 8.48 wt.% compared with the non-catalytic pyrolysis. Lastly, the pyrolytic oils were characterized with applying a various techniques such as elemental analyses and various chromatographic and spectroscopic techniques (GC-MS, ¹H NMR, FT-IR, etc.). The characterization results revealed that the pyrolytic oils which were complex mixtures of C₅-C₁₅ organic compounds (predominantly aromatic compounds) and also the CPO compared to the NCPO was more similar to conventional fuels in view of the certain fuel properties.     

Evaluating source separation of plastic waste using conjoint analysis

Using conjoint analysis, we estimated the willingness to pay (WTP) of households for source separation of plastic waste and the improvement of related environmental impacts, the residents' loss of life expectancy (LLE), the landfill capacity, and the CO(2) emissions. Unreliable respondents were identified and removed from the sample based on their answers to follow-up questions. It was found that the utility associated with reducing LLE and with the landfill capacity were both well expressed by logarithmic functions, but that residents were indifferent to the level of CO(2) emissions even though they approved of CO(2) reduction. In addition, residents derived utility from the act of separating plastic waste, irrespective of its environmental impacts; that is, they were willing to practice the separation of plastic waste at home in anticipation of its "invisible effects", such as the improvement of citizens' attitudes toward solid waste issues.     

Estimating uncertainties in the life cycle assessment of composting household biowaste and urban green waste in Germany

Life cycle assessment (LCA) of waste treatment processes is often associated with considerable uncertainties. The aim of this study is to estimate the total uncertainty in the modelled composting system and the influence of material and process parameters on the uncertainty. Four composting combinations with fresh (FC) and mature substrate compost (MSC) from partially enclosed (PEC) and open composting (OC) were investigated. Perturbation analysis was used to determine the effect of parameters on the result and Monte Carlo simulation was used to estimate the total uncertainty. This study showed that the production of MSC using PEC had the lowest overall impacts across all impact categories except ozone depletion. Results of the Monte Carlo simulation showed that comparing composting options was challenging. The sensitivity ratios obtained from the perturbation analysis showed that the process parameter percentage of carbon fraction degraded was the most influential for FC. In MSC, the moisture content in the input material and the substitution factor used for peat were the most influential. Monte Carlo simulations demonstrated the overall uncertainty of the model and its relevance when comparing results between combinations. The perturbation analysis identified the parameters that required more accurate data to reduce the uncertainty in the model.

Graphical abstract

     

硫磺制酸厂余热发电技术

介绍了硫磺制酸厂利用余热发电的工艺流程，设备配置及其运行效果。