Microbial degradation of propanil in aquatic systems

Second-order microbial degradation rate constants were developed for the herbicide propanil in lake and water samples from the Union of Soviet Socialist Republics. Variations in calculated second-order rate constants were attributed to differences in bacterial counting methods used. Rate constants determined for propanil transformation in waters investigated in the USSR were similar to those established for natural water systems throughout the United States.     

Kinetics of aqueous base and acid hydrolysis of aldicarb, aldicarb sulfoxide and aldicarb sulfone

The kinetics of degradation of aqueous solutions of aldicarb, aldicarb sulfoxide and aldicarb sul fone by base hydrolysis were investigated. Pseudo first order rate constants of 37 micrograms/l solutions were determined at different hydroxide concentrations by acid-base titration. Second order rate constants were calculated, and it was found that aldicarb sulfone is more sensitive to hydroxide ion concentration than aldicarb sulfoxide which is more sensitive than aldicarb. Temperature effects were determined by measuring the base hydrolysis rate constant for aldicarb sulfone at 5, 15, 20, 25, 30, and 35 degrees C. An activation energy of 15.2 +/- 0.1 kcal/mole was calculated. Addition of a neutral electrolyte decreased the rate constant for base hydrolysis. Acid catalyzed hydrolysis rate constants were also measured for aldicarb sulfone, and, as expected, the reaction was much slower. The second order (reaction) rate constant for base hydrolysis of aldicarb sulfone is 40.3 (+/- 0.5) liter mole-1min-1; for acid catalyzed hydrolysis it is 7.33 (+/- 0.06) X 10(-4) liter mole-1min-1.     

Kinetics and mechanism of the hydrolysis of thiamethoxam

The degradation of thiamethoxam [(EZ)-3-(2-chloro-1,3-thiazol-5-yl-methyl)-5-methyl-1,3,5-oxadiazinan-4-ylidene (nitro) amine] insecticide in buffers at different pH and temperature levels was investigated in laboratory studies. Acidic hydrolysis under conventional heating conditions and alkaline hydrolysis under both conventional heating and microwave conditions were carried out. Different hydrolysis products were found to form under alkaline and acidic conditions. Hydrolysis of thiamethoxam in acidic, neutral and alkaline buffers followed first-order reaction rate kinetics at pH 4, 7 and 9.2, respectively. Thiamethoxam readily hydrolyzed in alkaline buffer but was comparatively stable in neutral buffer solution. The main products formed under different conditions were characterized on the basis of infrared (IR), ¹H-NMR and Mass spectroscopy. The possible mechanisms for the formation of these hydrolysis products have also been proposed.     

Influence of sorption to dissolved humic substances on transformation reactions of hydrophobic organic compounds in water. Part II: hydrolysis reactions

The effect of dissolved humic acid (HA) on two types of hydrolysis reactions was investigated: (I) dehydrochlorination of gamma-hexachlorocyclohexane (HCH) and 1,1,2,2-tetrachloroethane (TeCA) as a reaction involving hydroxide ions (OH(-)) and (II) hydrolysis of 1-octyl acetate (OA) which is catalyzed by H(+) at the applied pH value (pH 4.5). The rate of TeCA hydrolysis was not affected by addition of 2 g l(-1) of HA at pH 10 (k' = 0.33 h(-1)) but HCH hydrolysis was significantly inhibited (k' = 4.6 x 10(-3) h(-1) without HA and 2.8 x 10(-3)h(-1) at 2 g l(-1) HA). HCH is sorbed by 51% whereas TeCA sorption is insignificant at this HA concentration. Sorbed HCH molecules are effectively protected due to electrostatic repulsion of OH(-) by the net negative charge of the HA molecules. In contrast, OA hydrolysis at pH 4.5 (k' = 1.6 x 10(-5) h(-1)) was drastically accelerated after addition of 2 g l(-1) HA (k' = 1.1 x 10(-3) h(-1)). The ratio of the pseudo-first-order rate constants of the sorbed and the freely dissolved ester fraction is about 70. H(+) accumulation in the microenvironment of the negatively charged HA molecules was suggested to contribute to the higher reaction rate for the sorbed fraction in case of this H(+)-catalyzed reaction. Analogous effects from anionic surfactants are known as micellar catalysis.     

酸碱联合调节剩余污泥过程中氮、磷和有机质的释放

实现城市污泥的减量化和资源化是污水厂面临的难题之一。通过采用(1)先酸性(pH=3)后碱性(pH=10)、(2)先碱性(pH=10)后酸性(pH=3)的两段控制方式(每段反应8 d),同时做pH不调的对比实验,研究剩余污泥水解酸化过程中氨氮、磷酸盐和溶解性COD(SCOD)、碳水化合物、蛋白质和挥发性脂肪酸(VFAs)等有机质组分的释放。结果表明,酸碱联合调节有利于各组分的释放;氮和磷在酸性条件下的释放量大于碱性,有机质在碱性条件下的释放量大于酸性;采用(2)方式,调为酸性后反应1 d,氨氮的释放量即达到最大(17.28 mg/g TS);采用(1)的调节方式反应7 d,磷酸盐能达到最佳释放量(14.16 mg/g TS);总VFAs的产生受反应时间的影响较大,其余有机质组分在(2)的调节方式下,6 d左右即可达到较大释放量。     

Urinary dialkyl phosphate levels before and after first season chlorpyrifos spraying amongst farm workers in the Western Cape, South Africa

The study investigated urinary levels of dialkyl phosphates resulting from pesticide exposure amongst 40 farm workers. Workers were tested (urinary dialkyl phosphate levels, anthropometry, short exposure questionnaire) before and after the first day of seasonal chlorpyrifos spraying. Median baseline urinary dialkyl phosphates was high amongst both non-applicators (1587.5 μg/g creatinine, n = 8) and applicators (365.6 μg/g creatinine, n = 9). There was not much evidence of an increase in post-spray dialkyl phosphates levels from pre-spray levels amongst both applicators and non-applicators. Hours mixing, spraying, driving a tractor and hours worked by non-applicators were not significantly associated with an increase in post-spray dialkyl phosphate levels, adjusting for age, height, weight, gender, use of empty pesticide containers and self-reported kidney problems. Past applicator status was weakly positively associated with pre-spray dialkyl phosphate levels adjusting for age, height, weight, and gender, self-reported kidney problems, smoking and alcohol (β= 1019.5, p = 0.307, R2 = 0.28). The high dialkyl phosphate levels call for an epidemiological investigation into the health effects of organophosphorous pesticides.     

Evaluation of photolysis and hydrolysis of atrazine and its first degradation products in the presence of humic acids

Relative importance of hydrolysis and photolysis of atrazine and its degradation products in aqueous solutions with dissolved humic acids (HA) has been assessed under exposure to sunlight and under UV irradiation. Quantum yield for direct photolysis of atrazine at 254 nm was 0.037 mol photon(-1), the reaction order was 0.8. Atrazine, desethylatrazine and desisopropylatrazine converted to their 2-hydroxy analogs with rate constants 0.02-0.08 min(-1) in clear solutions, while addition of HA (300 mg L(-1)) caused a 10-fold increase in rate constants. Hydroxyatrazine was not degraded. No evidence of photo-Fenton reaction was found. Under exposure to solar light, atrazine, desethylatrazine and desisopropylatrazine were converted to 2-hydroxy analogs only at pH 2 because of acid hydrolysis and possible contribution of photolysis. At lower HA concentration, only their light-shielding effect was noticed, while at higher concentrations, HA-catalysed hydrolysis prevailed. Hydroxyatrazine concentration diminished at all pH values in solutions without HA exposed to sunlight.     

Stability of cocaine and its metabolites in municipal wastewater – the case for using metabolite consolidation to monitor cocaine utilization

Transformations of cocaine and eleven of its metabolites were investigated in untreated municipal sewage at pH?≈?7 and 9, 23, and 31 °C. Results indicated that hydrolysis—possibly bacterially mediated—was the principal transformation pathway. Residues possessing alkyl esters were particularly susceptible to hydrolysis, with pseudo-first-order rate constants varying from 0.54 to 1.7 day^?1 at 23 °C. Metabolites lacking esters or possessing only a benzoyl ester appeared stable. Residues lacking alkyl esters did accumulate through hydrolysis of precursors, however. As noted previously, this may positively bias cocaine utilization estimates based on benzoylecgonine alone. Reported variability in metabolic excretion was used in conjunction with transformation data to evaluate different approaches for estimating cocaine loading. Results indicate that estimates derived from measurands that capture all major cocaine metabolites, such as COC_tot (the sum of all measurable metabolites) and EC_hyd (the sum of all metabolites that can be hydrolyzed to ecgonine), may reduce uncertainty arising from variability in metabolite transformation and excretion, possibly to?≈?10 % RSD. This is more than a two-fold reduction relative to estimates derived from benzoylecgonine (>26 % RSD), and roughly equivalent to reported uncertainties from sources that are not metabolite-specific (e.g., sampling frequency, flow variability). They and other composite measurands merit consideration from the sewage epidemiology community, beginning with efforts to evaluate the stability of the total cocaine load under realistic sewer conditions.     

Urinary dialkyl phosphate levels before and after first season chlorpyrifos spraying amongst farm workers in the Western Cape,South Africa

The study investigated urinary levels of dialkyl phosphates resulting from pesticide exposure amongst 40 farm workers. Workers were tested (urinary dialkyl phosphate levels, anthropometry, short exposure questionnaire) before and after the first day of seasonal chlorpyrifos spraying. Median baseline urinary dialkyl phosphates was high amongst both non-applicators (1587.5 μg/g creatinine, n = 8) and applicators (365.6 μg/g creatinine, n = 9). There was not much evidence of an increase in post-spray dialkyl phosphates levels from pre-spray levels amongst both applicators and non-applicators. Hours mixing, spraying, driving a tractor and hours worked by non-applicators were not significantly associated with an increase in post-spray dialkyl phosphate levels, adjusting for age, height, weight, gender, use of empty pesticide containers and self-reported kidney problems. Past applicator status was weakly positively associated with pre-spray dialkyl phosphate levels adjusting for age, height, weight, and gender, self-reported kidney problems, smoking and alcohol (β= 1019.5, p = 0.307, R²= 0.28). The high dialkyl phosphate levels call for an epidemiological investigation into the health effects of organophosphorous pesticides.     

The influence of cosolvent and heat on the solubility and reactivity of organophosphorous pesticide DNAPL alkaline hydrolysis

The presented research concerned the compatibility of cosolvents with in situ alkaline hydrolysis (ISAH) for treatment of organophosphorous (OPP) pesticide contaminated sites. In addition, the influence of moderate temperature heat increments was studied as a possible enhancement method. A complex dense non-aqueous phase liquid (DNAPL) of primarily parathion (~50 %) and methyl parathion (~15 %) obtained from the Danish Groyne 42 site was used as a contaminant source, and ethanol and propan-2-ol (0, 25, and 50 v/v%) was used as cosolvents in tap water and 0.34 M NaOH. Both cosolvents showed OPP solubility enhancement at 50 v/v% cosolvent content, with slightly higher OPP concentrations reached with propan-2-ol. Data on hydrolysis products did not show a clear trend with respect to alkaline hydrolysis reactivity in the presence of cosolvents. Results indicated that the hydrolysis rate of methyl-parathion (MP3) decreased with addition of cosolvent, whereas the hydrolysis rate of ethyl-parathion (EP3) remained constant, and overall indications were that the hydrolysis reactions were limited by the rate of hydrolysis rather than NAPL dissolution. In addition to cosolvents, the influence of low-temperature heating on ISAH was studied. Increasing reaction temperature from 10 to 30 °C provided an average rate of hydrolysis enhancement by a factor of 1.4–4.8 dependent on the base of calculation. When combining 50 v/v% cosolvent addition and heating to 30 °C, EP3 solubility was significantly enhanced and results for O,O-diethyl-thiophosphoric acid (EP2 acid) showed a significant enhancement of hydrolysis as well. However, this could not be supported by para-nitrophenol (PNP) data indicating the instability of this product in the presence of cosolvent.

     

Performance of secondary P-fertilizers in pot experiments analyzed by phosphorus X-ray absorption near-edge structure (XANES) spectroscopy

A pot experiment was carried out with maize to determine the phosphorus (P) plant-availability of different secondary P-fertilizers derived from wastewater. We analyzed the respective soils by P K-edge X-ray absorption near-edge structure (XANES) spectroscopy to determine the P chemical forms that were present and determine the transformation processes. Macro- and micro-XANES spectroscopy were used to determine the chemical state of the overall soil P and identify P compounds in P-rich spots. Mainly organic P and/or P adsorbed on organic matter or other substrates were detected in unfertilized and fertilized soils. In addition, there were indications for the formation of ammonium phosphates in some fertilized soils. However, this effect was not seen in the maize yield of all P-fertilizers. The observed reactions between phosphate from secondary P-fertilizers and co-fertilized nitrogen compounds should be further investigated. Formation of highly plant-available compounds such as ammonium phosphates could make secondary P-fertilizers more competitive to commercial phosphate rock-based fertilizers with positive effects on resources conservation.     

Catalytic properties of cyclodextrins on the hydrolysis of parathion and paraoxon in aquatic medium containing humic acids

The inclusion catalysis effects of -,β- and γ-cyclodextrins(CyDs) on the hydrolysis rate of parathion, methyl parathion and paraoxon were investigated at 25°C in alkaline buffer solution(pH=8.5) containing humic acids. The hydrolysis rate of these pesticides was increased by the presence of humic acids. The inclusion catalysis of β-CyD inhibited parathion hydrolysis but promoted paraoxon hydrolysis. The CyD inclusion catalysis showed characteristic correlation with relative magnitudes of the inclusion-depth parameters of the pesticides which could be determined by the rotational-strength analysis of the induced circular dichroism. The essential properties of the CyD inclusion catalysis were explained in terms of the geometries of the CyD-pesticide inclusion complexes which determine degree of the proximity between the pesticide reaction site and the CyD catalytic site.     

无公害清洗剂的研制

研制了无公害清洗剂,该剂为弱碱性水基清洗剂,不含强酸,强碱,磷,铝等有害成分,能有效地清洗任何硬表面的油污,对人,畜基本无毒。     

Solvent and surfactant enhanced solubilization, stabilization, and degradation of amitraz

In an effort to help with the development of effective dip vat management and waste disposal strategies this study determined how solution properties such as pH, buffer composition, ionic strength, temperature, solubility in organic solvents and the addition of commonly used solubilizing agents influenced the hydrolysis of amitraz. Amitraz degrade by means of hydrolysis described by a pseudo-first order rate process and a type ABCD pH rate profile. Hydrolysis increased with temperature and was fastest at low pH, slowest at neutral to slightly alkaline pH, and slightly increased above pH 10. However, buffer concentration and ionic strength influenced the hydrolysis rate and had to be accounted for before constructing a pH rate profile. Hydrolysis seems to depend on the dielectric constant of solvent mixtures and was fastest in water, slower in propylene glycol and ethanol solutions, and slowest in DMSO mixtures. In surfactant solutions, anionic micelles enhanced and cationic micelles retarded the hydrolysis rate. The magnitude of micellar effects decreased with increasing concentrations of the surfactants. The increased solubility and faster hydrolysis of amitraz in the sodium lauryl sulfate solutions showed that anionic surfactants potentially could be used for cleaning up amitraz spills, because it both solubilized the drug and catalyzed hydrolysis.     

Adsorption of phosphate from aqueous solution onto alunite

The phosphate removal potential of alunite, a low cost and abundantly available material, has been investigated. The effects of calcination temperature and time of alunite, adsorbent particle size, pH and initial phosphate concentration on the phosphate adsorption by the calcined alunite have been studied. Phosphate removal was seen to increase with increasing calcination temperature, decreasing adsorbent particle size and pH. Adsorption of phosphate followed first-order rate kinetics. Langmuir and Freundlich adsorption isotherm constants and correlation coefficients were calculated and compared. It was concluded that the adsorption data of phosphate onto calcined alunite fitted to the Langmuir model more than Freundlich model. Specific surface areas of the calcined alunite were calculated at different calcination temperatures and particle sizes.     

Kinetics and mechanism of oxidation of tetrachloroethylene with permanganate

The kinetics, reaction pathways and product distribution of oxidation of tetrachloroethylene (PCE) by potassium permanganate (KMnO4) were studied in phosphate-buffered solutions under constant pH, isothermal, completely mixed and zero headspace conditions. Experimental results indicate that the reaction is first-order with respect to both PCE and KMnO4 and has an activation energy of 9.3+/-0.9 kcal/mol. The second-order rate constant at 20 degrees C is 0.035+/-0.004 M(-1) s(-1), and is independent of pH and ionic strength (I) over a range of pH 3-10 and I approximately 0-0.2 M, respectively. The PCE-KMnO4 reaction may proceed through further oxidation and/or hydrolysis reaction pathways, greatly influenced by the acidity of the solution, to yield CO2(g), oxalic acid, formic acid and glycolic acid. Under acidic conditions (e.g., pH 3), the further oxidation pathway will dominate and PCE tends to be directly mineralized into CO2 and chloride. Under neutral (e.g., pH 7) and alkaline conditions (e.g., pH 10), the hydroxylation pathway dominates the reaction and PCE is primarily transformed into oxalic acid prior to complete PCE mineralization. Moreover, all chlorine atoms in PCE are rapidly liberated during the reaction and the rate of chloride production is very close to the rate of PCE degradation.     

Phosphorus release from ash, dried sludge and sludge residue from supercritical water oxidation by acid or base

Leaching of ash and dried sewage sludge were investigated and compared with the leaching results of sludge residue from supercritical water oxidation (SCWO). This article focuses on how the composition of ash and sludge residues influences the extraction of phosphate and heavy metals and if different treatment temperatures of the sludge effect the leachability. Results showed that acid leaching gave a higher release of phosphate than alkaline leaching for all ash and sludge residue samples. Also, alkaline leaching dissolved phosphate with a lower metal contamination than acid leaching. Furthermore, it was found that iron had a low release at both alkaline and acid leaching from ash and from SCWO residue. The difference in composition of ash and sludge residue samples had no significant influence on release of phosphate at high concentrations of acid. Phosphate release from ash, dried sludge at 300 degrees C and SCWO residue showed similar results at 1M acid leaching. However, it seems to be easier to release phosphate from the SCWO residue than from the ash at low acid concentrations. SCWO residue showed higher release than the other ashes at 0.5M HCl. Results for alkaline leaching showed higher release from ash at 1M NaOH than from SCWO residue or from dried sludge at 300 degrees C. The leaching of phosphate from dried sludge seems to be temperature dependent, as the dried sludge treated at higher temperature showed less release of phosphate. It was found that the pre-treatment of the ash may be important for better release of phosphate.     

Effect of bone meal (calcium phosphate) amendments on metal release from contaminated soils--a leaching column study

Metal-contaminated soil may be remediated in situ by the formation of highly insoluble metal phosphates if an appropriate phosphorus (P) source can be found. Leaching column experiments have been carried out to assess the suitability of bone meal as such a source. Bone meal additions reduced metal release from a contaminated soil, increased soil and leachate pH and decreased soil leachate toxicity. Minimal P leaching occurred from the soil. The data are consistent with a proton consuming bone meal (calcium phosphate) dissolution reaction followed by the formation of metal phosphates. Although, no metal phosphates were observed to form using X-ray diffraction of scanning electron microscopy this could be due to their low concentration. Relatively low (1:50 bone meal:soil) concentrations of fine (90-500 microns) bone meal would appear to be an effective treatment for metal-contaminated soils.