The estimation of PAH bioavailability in contaminated sediments using hydroxypropyl-beta-cyclodextrin and Triton X-100 extraction techniques

A study was conducted to investigate whether cyclodextrins and surfactants can be used to predict polycyclic aromatic hydrocarbon (PAH) bioavailability in contaminated sediments. Two sediment samples were extracted with aqueous solutions of hydroxypropyl-beta-cyclodextrin (HPCD) and Triton X-100. PAH removal during extraction was compared with PAH removal during biodegradation and solid-phase extraction. The latter two methods were used as reference methods to establish which part of the PAHs could be biodegraded and to what extent biodegradation was governed by bioavailability limitations. It was demonstrated that HPCD extraction followed solid-phase extraction and removed primarily readily bioavailable PAHs, while Triton X-100 extracted both readily and poorly bioavailable PAHs. Moreover, HPCD did not affect the degradation of PAHs in biodegradation experiments, while Triton X-100 enhanced the degradation of low molecular weight PAHs. It was concluded that HPCD extraction may provide a good method for the prediction of PAH bioavailability. Triton X-100 extraction is unfit for the prediction of PAH bioavailability.     

Comparison of selected non-exhaustive extraction techniques to assess PAH availability in dissimilar soils

Recently, it has become apparent that the use of total contaminant concentrations as a measure of potential contaminant exposure to plants or soil organisms is inappropriate and that bioavailability of contaminants is a better measure of potential exposure. In light of this, non-exhaustive extraction techniques are being investigated to assess their appropriateness in determining bioavailability. In this study, phenanthrene extractability using hydroxypropyl-beta-cyclodextrin (HPCD) and desorption kinetics using butan-1-ol (BuOH) were determined in three dissimilar spiked soils. The soils were extracted after 1 d, 40 d and 80 d of soil-compound contact time. The amount of phenanthrene extracted by HPCD was compared to the rapidly desorbed fraction removed by BuOH. Further experiments using the same soils and extraction methods to assess the relative extractability of phenanthrene, pyrene and benzo(a)pyrene were conducted. Overall, the extraction methods used in this study had different extraction efficiencies. Results suggest that as compound hydrophobicity increased, BuOH became a more exhaustive extractant with respect to HPCD, especially for soils with high clay and organic matter content. These results are important as they highlight differences between two contrasting non-exhaustive extraction techniques both of which have been suggested to be appropriate in the assessment of bioavailability.     

Chemical assays of availability to earthworms of polycyclic aromatic hydrocarbons in soil

The bioavailable concentration of an organic pollutant is less than the concentration determined by vigorous extraction of soil. Because bioavailability varies with the particular compound, soil, and aging time, an assay for bioavailability is needed. Three methods were tested: extraction with a 25% aqueous solution of tetrahydrofuran (THF), 95% ethanol, and C18 membranes. Evaluations were conducted with a mixture of four polycyclic aromatic hydrocarbons (PAHs) added to five dissimilar soils and with pyrene as sole PAH added to six soils, and the availability of aged and freshly added compounds was determined. Assimilation by earthworms (Eisenia fetida) was used to assess bioavailability. For extraction with THF and earthworm uptake, the correlation coefficients of determination (R2) for anthracene, chrysene, pyrene, and benzo(a)pyrene added as a mixture exceeded 0.85. The R2 values for assays with the C18 membrane were 0.77 or higher. The values for pyrene added alone were 0.710 and 0.823, respectively. R2 values for assays with ethanol often exceeded 0.87, but lower values were sometimes obtained. We suggest that such solvent or solid-phase extractions may be useful in assessing PAH bioavailability.     

Influence of hydroxypropyl-beta-cyclodextrin (HPCD) on the bioavailability and biodegradation of pyrene

It is well known that the limited aqueous solubilities of polycyclic aromatic hydrocarbons (PAH) often reduce their bioavailability to bacterial populations. The objective of this study was to test the impact of a solubility-enhancement reagent, hydroxypropyl-beta-cyclodextrin (HPCD), on the bioavailability and biodegradation of pyrene. No measurable loss of pyrene occurred for the control vials throughout the first 22 weeks of the experiment, indicating the absence of mass loss via abiotic transformation and volatilization. The vials containing pyrene and the degrader isolate (Burkholderia CRE 7), but no HPCD, also exhibited no measurable loss of pyrene throughout the experiment. Conversely, biodegradation of pyrene appears to have been initiated after approximately 15 weeks for the vials containing 10(4) mg l(-1) HPCD. By the end of the experiment, approximately 14% (w/w) of the pyrene was biodegraded in the presence of HPCD. These results indicate that HPCD may be useful for enhancing the bioavailability and biodegradation of pyrene and other PAHs.     

Treatment of PAHs in contaminated soil by extraction with aqueous DNA followed by biodegradation with a pure culture of Sphingomonas sp

The biodegradation of polycyclic aromatic hydrocarbons (PAHs) in aqueous deoxyribonucleic acid (DNA) solution from contaminated soil washing was investigated. Initial data with a model effluent consisting of anthracene, phenanthrene, pyrene and benzo[a]pyrene that were individually dissolved in 1% aqueous DNA solution confirmed their positive degradation by Sphingomonas sp. at around 10(8)CFU mL(-1) initial cell loading. For anthracene and phenanthrene, complete removal was achieved within 1h treatment. Degradation of pyrene and benzo[a]pyrene took a relatively longer time of a few days and weeks, respectively. DNA-dissolved PAHs were also degraded relatively faster than PAH crystals in aqueous medium to suggest that the binding of the PAHs in the polymer does not pose serious constraint to bacterial uptake. The DNA was stable against the PAH-degrading bacteria. Parallel experiments with actual DNA solutions obtained during pyrene extraction from an artificially spiked soil also showed similar results. Close to 100% pyrene degradation was achieved after 1d treatment. With its chemical stability, the cell-treated DNA was re-used up to four cycles without a considerable decline in extraction performance.     

Bioavailability assessment and environmental fate of polycyclic aromatic hydrocarbons in biostimulated creosote-contaminated soil

When hydrocarbon-contaminated soil is subjected to bioremediation technology, hydrocarbon depletion is typically marked by an initially rapid reduction rate. This rate decreases over time and frequently a residual concentration remains in the soil. This kinetic has been attributed primarily to the enrichment of more recalcitrant fractions, as well as to the lack of resting hydrocarbon bioavailability. Thus, at the end of the bioremediation process, a part of the residual hydrocarbon soil concentration represents the non-bioavailable fraction, which is difficult to degrade by microbial populations and which poses a minor hazard. Therefore, determination of the bioavailable fraction in a bioremediation project represents both an estimation of the maximum level of achievable biodegradation, as well as an additional indication of the environmental health hazard. In the present study, aged creosote-contaminated soil was subjected to biostimulation processes, and the bioavailable fraction for several target polycyclic aromatic hydrocarbons (PAHs) was calculated using a mild extraction with cyclodextrines. The amount of PAH extracted corresponded to the desorbing fraction and can be regarded as the bioavailable fraction. The non-desorbing fraction data obtained from this procedure were compared to the remaining PAH concentrations following bioremediation treatment of soil microcosms. These results permitted the establishment of a theoretical biodegradation limit based on the desorbing fraction. In addition, neither accumulation of intermediate metabolites, nor the formation of bound-residues or reduced acute toxicity was observed.     

Effect of expandable clays and cometabolism on PAH biodegradability

Pyrene and phenanthrene degradation was examined in both single and binary slurry systems for three different natural soils. It was found that the amount of total expandable clays (smectite and vermiculite) was in a good agreement with the achieved rate and extent of biodegradation. For instance, the intrinsic phenanthrene biodegradation rate was 626 microg/L/day for the soil with the largest expandable clay and 3203 microg/L/day for the soil with the least. Similarly, the smallest total pyrene biodegradation (65%) was found for the soil rich in expandable clays, compared to an 82% pyrene reduction in the soil that had the lowest amount. Mass transfer limitation after compound sorption to the clays was more pronounced for the more hydrophobic pyrene. In the presence of phenanthrene, total pyrene biodegradation increased by 2 to 7% due to cometabolism, while the total phenanthrene biodegradation was only enhanced by 0.5 to 5% in the binary system. This research demonstrated that expandable clays might govern the substrate availability to microorganisms and microbial accessibility to substrates. Therefore, the contribution of organic matter and expandable clays to sorption, desorption and biodegradation should be taken equally into account in order to better understand complex bioremediation issues.     

Impacts of microbial redox conditions on the phase distribution of pyrene in soil-water systems

Variations in the soil/sediment organic matter (SOM)-hydrophobic organic contaminant (HOC) bindings upon microbially mediated redox conditions were examined. While the extractability of pyrene associated with soil declined after its biodegradation began during aerobic incubation, its variations were almost constant (±3.0-4.4%) during anoxic/anaerobic incubations. The dissolved organic matter released from the soil incubated under highly reduced conditions became more humified and aromatic, had a higher average molecular weight, and was more polydispersed compared to that obtained from oxic incubation, similar to the SOM alterations in the early stage of diagenesis (humification). The concentrations of pyrene in the aqueous phase increased significantly during the soil incubations under highly reduced conditions due to its favorable interaction with the altered DOM. Our results suggest that the microbially mediated redox conditions have significant impacts on SOM and should be considered for the transport, fate, bioavailability, and exposure risk of HOCs in the geo-environments.     

Hydroxypropyl-β-cyclodextrin extractability and bioavailability of phenanthrene in humin and humic acid fractions from different soils and sediments

Organic matter (OM) plays a vital role in controlling polycyclic aromatic hydrocarbon (PAH) bioavailability in soils and sediments. In this study, both a hydroxypropyl-β-cyclodextrin (HPCD) extraction test and a biodegradation test were performed to evaluate the bioavailability of phenanthrene in seven different bulk soil/sediment samples and two OM components (humin fractions and humic acid (HA) fractions) separated from these soils/sediments. Results showed that both the extent of HPCD-extractable phenanthrene and the extent of biodegradable phenanthrene in humin fraction were lower than those in the respective HA fraction and source soil/sediment, demonstrating the limited bioavailability of phenanthrene in the humin fraction. For the source soils/sediments and the humin fractions, significant inverse relationships were observed between the sorption capacities for phenanthrene and the amounts of HPCD-extractable or biodegradable phenanthrene (p?<?0.05), suggesting the importance of the sorption capacity in affecting desorption and biodegradation of phenanthrene. Strong linear relationships were observed between the amount of HPCD-extractable phenanthrene and the amount degraded in both the bulk soils/sediments and the humin fractions, with both slopes close to 1. On the other hand, in the case of phenanthrene contained in HA, a poor relationship was observed between the amount of phenanthrene extracted by HPCD and the amount degraded, with the former being much less than the latter. The results revealed the importance of humin fraction in affecting the bioavailability of phenanthrene in the bulk soils/sediments, which would deepen our understanding of the organic matter fractions in affecting desorption and biodegradation of organic pollutants and provide theoretical support for remediation and risk assessment of contaminated soils and sediments.     

Rapid quantification of polycyclic aromatic hydrocarbons in hydroxypropyl-beta-cyclodextrin (HPCD) soil extracts by synchronous fluorescence spectroscopy (SFS)

Synchronous fluorescence spectroscopy (SFS) was directly applied to rapidly quantify selected polycyclic aromatic hydrocarbons (PAHs: benzo[a]pyrene and pyrene) in aqueous hydroxypropyl-beta-cyclodextrin (HPCD) soil extract solutions from a variety of aged contaminated soils containing four different PAHs. The method was optimized and validated. The results show that SFS can be used to analyse benzo[a]pyrene and pyrene in HPCD based soil extracts with high sensitivity and selectivity. The linear calibration ranges were 4.0x10(-6)-1.0x10(-3)mM for benzo[a]pyrene and 6.0x10(-6)-1.2x10(-3)mM for pyrene in 10mM HPCD aqueous solution alone. The detection limits according to the error propagation theory for benzo[a]pyrene and pyrene were 3.9x10(-6) and 5.4x10(-6)mM, respectively. A good agreement between SFS and HPLC was reached for both determinations of PAHs in HPCD alone and in soil HPCD extracts. Hence, SFS is a potential means to simplify the present non-exhaustive hydroxypropyl-beta-cyclodextrin (HPCD)-based extraction technique for the evaluation of PAH bioavailability in soil.     

The efficiency of two standardized procedures for extracting mutagenic chemicals from soils

A major technical limitation to monitoring the fate of mutagenic compounds in soil is the lack of an established extraction procedure. This study was conducted to evaluate the efficiency of the blender extraction procedure for extracting benzo(a)pyrene (BAP) or 2-nitrofluorene (2NF) from a Weswood silt loam or a Bastrop clay loam soil. Extracted residues were evaluated using the Salmonella/microsome mutagenicity assay and high performance liquid chromatography (HPLC) to quantify recovery of the two chemicals from soil. In addition, a limited study using only the mutagenicity assay was conducted to compare the efficiency of the Blender and Soxhlet extraction procedures for recovering organic mutagens from both soils amended with a wood preserving bottom sediment waste.Extracted residues were dissolved in dimethylsulfoxide to concentrations that could be detected in the bioassay. Over all treatment levels and for both soils, the extraction efficiency of the blender procedure for BAP was greater than 80% for 12 of 16 treatments as measured using both bioassay and HPLC analysis; while, for 2NF the extraction efficiency was greater than 90% for all 15 treatments as measured by HPLC, and greater than 80% for twelve of 15 treatments as measured by bioassay. These results indicate that blender extraction provided efficient recovery of the pure compounds tested. When the efficiency of the blender and Soxhlet procedure for extracting the wood-preserving bottom sediment and waste amended soil were compared, significantly greater levels of mutagenic activity were detected in the fractions extracted using the blender extraction than were detected using the Soxhlet extraction.     

Relationship of properties of polycyclic aromatic hydrocarbons to sequestration in soil.

A study was conducted to determine whether the sequestration of 21 polycyclic aromatic hydrocarbons (PAHs) in soil was correlated with their properties. From 22 to 58% of the PAHs was not extracted with n-butanol after their addition to soil. After 28 days of aging, the percentage of the PAHs remaining in the soil increased to 47-77%; however, nearly all of each compound was recovered by Soxhlet extraction. Correlations were based on the amounts of aged compound extracted with butanol. Properties of compounds used in the correlations included Kow, molecular length and molecular-connectivity indices (MCIs). No one property, including log Kow, resulted in an R2 value greater than 0.26. A chain MCI (2 chi vCH) together with log Kow or a first-order MCI (1 chi) resulted in R2 values of 0.49 and 0.54, respectively. The data suggest that the properties tested are not important to predicting the sequestration of PAHs in soil.     

Remediation of PAH contaminated soils: application of a solid-liquid two-phase partitioning bioreactor

The feasibility of a two-step treatment process has been assessed at laboratory scale for the remediation of soil contaminated with a model mixture of polycyclic aromatic hydrocarbons (PAHs) (phenanthrene, pyrene, and fluoranthene). The initial step of the process involved contacting contaminated soil with thermoplastic, polymeric pellets (polyurethane). The ability of three different mobilizing agents (water, surfactant (Biosolve) and isopropyl alcohol) to enhance recovery of PAHs from soil was investigated and the results were compared to the recovery of PAHs from dry soil. The presence of isopropyl alcohol had the greatest impact on PAH recovery with approximately 80% of the original mass of PAHs in the soil being absorbed by the polymer pellets in 48 h. The second stage of the suggested treatment involved regeneration of the PAH loaded polymers via PAH biodegradation, which was carried out in a solid-liquid two-phase partitioning bioreactor. In addition to the PAH containing polymer pellets, the bioreactor contained a microbial consortium that was pre-selected for its ability to degrade the model PAHs and after a 14 d period approximately 78%, 62% and 36% of phenanthrene, pyrene, and fluoranthene, respectively, had been desorbed from the polymer and degraded. The rate of phenanthrene degradation was shown to be limited by mass transfer of phenanthrene from the polymer pellets. In case of pyrene and fluoranthene a combination of mass transfer and biodegradation rate might have been limiting.     

Pyrene biodegradatin in aqueous solutions and soil slurries by Mycobacterium PYR-1 and enriched consortium

To better understand complex bioavailability issues, pyrene degradation was examined in aqueous and soil slurry solutions using pure Mycobacterium sp. PYR-1 and a microbial consortium. The intrinsic rates of the aqueous pyrene degradation were very similar, 1.3 x 10(-9) microg pyrene/CFU-h for Mycobacterium sp. PYR-1 and 1.1 x 10(-9) microg pyrene/CFU-h for the consortium. Rates were much lower with the soil-slurry experiments, ranging from 1.2 x 10(-12) to 7.8 x 10(-10) microg/CFU-h, depicting the strong negative effects of soils on bioavailability. Supernatants from the slurry experiments were found to increase the aqueous-phase pyrene solubility significantly. Pyrene solubility was increased from 120.5 to over 230 microg/l. However, the linear adsorption constants of pyrene on the soil were reduced.     

Biodegradability of aged pyrene and phenanthrene in a natural soil

A study was conducted to evaluate the biodegradability of pyrene (PYR) and phenanthrene (PHE) aged in a natural soil. Both the single and binary systems were either biostimulated via a nutrient amendment or bioaugmented via an inoculation of the enriched bacteria and nutrients. Aging resulted in higher concentration of both compounds and smaller bacterial activity in the solution-phase. Surprisingly, the total biodegraded extent was greater in the aged soil system than in the freshly spiked system. As anticipated, biostimulation was not appropriate to attain an effective biodegradation in this study, and bioaugmentation achieved a substantial increase the total biodegradation extent. The above findings were attributed to indigenous Pseudomonas aeruginosa entering a stationary-phase during the 200-day aging and producing rhamnolipid biosurfactants. In addition, a different sampling technique (i.e., after vigorous hand-shaking) revealed a 15 times higher microbial population than the normal sampling from the stagnant solution. Therefore, PAH bioavailability in the aged soils can be underestimated when the microbial activity is determined only from the stagnant solution. Furthermore, cometabolism enhanced PYR degradation when PHE was present as a primary substrate.     

AhR agonist and genotoxicant bioavailability in a PAH-contaminated soil undergoing biological treatment

Background, aim, and scope  Degradation of the 16 US EPA priority PAHs in soil subjected to bioremediation is often achieved. However, the PAH loss is not always followed by a reduction in soil toxicity. For instance, bioanalytical testing of such soil using the chemical-activated luciferase gene expression (CALUX) assay, measuring the combined effect of all Ah receptor (AhR) activating compounds, occasionally indicates that the loss of PAHs does not correlate with the loss of Ah receptor-active compounds in the soil. In addition, standard PAH analysis does not address the issue of total toxicant bioavailability in bioremediated soil. Materials and methods  To address these questions, we have used the CALUX AhR agonist bioassay and the Comet genotoxicity bioassay with RTL-W1 cells to evaluate the toxic potential of different extracts from a PAH-contaminated soil undergoing large-scale bioremediation. The extracts were also chemically analyzed for PAH16 and PCDD/PCDF. Soil sampled on five occasions between day 0 and day 274 of biological treatment was shaken with n-butanol with vortex mixing at room temperature to determine the bioavailable fraction of contaminants. To establish total concentrations, parts of the same samples were extracted using an accelerated solvent extractor (ASE) with toluene at 100°C. The extracts were tested as inducers of AhR-dependent luciferase activity in the CALUX assay and for DNA breakage potential in the Comet bioassay. Results  The chemical analysis of the toluene extracts indicated slow degradation rates and the CALUX assay indicated high levels of AhR agonists in the same extracts. Compared to day 0, the bioavailable fractions showed no decrease in AhR agonist activity during the treatment but rather an up-going trend, which was supported by increasing levels of PAHs and an increased effect in the Comet bioassay after 274 days. The bio-TEQs calculated using the CALUX assay were higher than the TEQs calculated from chemical analysis in both extracts, indicating that there are additional toxic PAHs in both extracts that are not included in the chemically derived TEQ. Discussion  The response in the CALUX and the Comet bioassays as well as the chemical analysis indicate that the soil might be more toxic to organisms living in soil after 274 days of treatment than in the untreated soil, due to the release of previously sorbed PAHs and possibly also metabolic formation of novel toxicants. Conclusions  Our results put focus on the issue of slow degradation rates and bioavailability of PAHs during large-scale bioremediation treatments. The release of sorbed PAHs at the investigated PAH-contaminated site seemed to be faster than the degradation rate, which demonstrates the importance of considering the bioavailable fraction of contaminants during a bioremediation process. Recommendations and perspectives  It has to be ensured that soft remediation methods like biodegradation or the natural remediation approach do not result in the mobilization of toxic compounds including more mobile degradation products. For PAH-contaminated sites this cannot be assured merely by monitoring the 16 target PAHs. The combined use of a battery of biotests for different types of PAH effects such as the CALUX and the Comet assay together with bioavailability extraction methods may be a useful screening tool of bioremediation processes of PAH-contaminated soil and contribute to a more accurate risk assessment. If the bioremediation causes a release of bound PAHs that are left undegraded in an easily extracted fraction, the soil may be more toxic to organisms living in the soil as a result of the treatment. A prolonged treatment time may be one way to reduce the risk of remaining mobile PAHs. In critical cases, the remediation concept might have to be changed to ex situ remediation methods.     

Novel method for determining pyrene biodegradation using synchronous fluorimetry

To study the biodegradation rate of pyrene dissolved in liquid medium supplemented with mineral salts, a synchronous fluorimetry (SF) method was established. The limit of detection for pyrene dissolved in mineral salts medium (MSM) was determined as 0.19 ng/ml with a relative standard deviation of less than 1.3% (n = 9). The pyrene degrading rates of four bacterial strains were investigated using this method under the same experimental conditions. The degradation rates of the three active strains ranged from 76% to 87% after a 14-h incubation. The results were confirmed by the gas chromatography with a flame ionized detector (GC/FID) method. This implies that pyrene degradation can be directly monitored by the SF method without the solvent extraction of samples. The advantages of SF are that it is less laborious, faster, and less expensive than the GC/FID determination method with solvent extraction. The SF method provides a new tool for studying the degradation of polynuclear aromatic hydrocarbons (PAHs) in the natural environment and under experimental conditions.     

Solid-phase bioassays and soil microbial activities to evaluate PAH-spiked soil ecotoxicity after a long-term bioremediation process simulating landfarming

The residual ecotoxicity of long-term bioremediated soils concomitantly spiked with three PAHs at four levels (15, 75, 150, 300 mg Sigma 3 PAHs kg(-1) soil) was evaluated using physico-chemical analyses, solid-phase bioassays and soil microbial activities. The pot-scale bioremediation process consisted of weekly moderate waterings in the presence or absence of sewage sludge compost (SSC) under greenhouse conditions. After 15 months, anthracene and pyrene were almost completely degraded whereas benzo[a]pyrene was still persisting, most apparently in SSC-amended soil treatments. However, no apparent toxic effects of the residual PAHs could be detected. SSC application at 40 t ha(-1) was performed to valorize the biowaste and stimulate PAH biodegradation but caused soil salinization and pH reduction at the end of the bioremediation process. Consequently, SSC-amended soils were characterized by strong phytotoxicity to lettuce and had adverse effects on the ostracod Heterocypris incongruens. Despite the smaller number of culturable bacterial populations in SSC-amended soils, soil enzymatic activities were not affected by the organic amendment and residual PAHs; and the bioremediation efficiency was likely to be more limited by the bioavailability of PAHs rather than by the total number of PAH-degraders.     

Determination of lindane leachability in soil-biosolid systems and its bioavailability in wheat plants

The leachability of lindane from different biosolid amended soils was determined and compared to its bioavailability. Sand, soil, and a mixture of soil-sand (1:1 w/w) were spiked with lindane, blended with different amounts of biosolids, and subjected to a leaching process with water that lasted for 1-28 d. This procedure is in accordance with ISO/TS 21268-1: 2007. After these batch tests, lindane was extracted from the leachates using three different solvent-free microextraction techniques, including solid phase microextraction (SPME), stir-bar sorptive extraction (SBSE), and silicone rod extraction (SRE). The amount of lindane was determined with thermal desorption and gas chromatography coupled to mass spectrometry (GC-MS). The efficiencies of the three microextraction techniques were statistically different, and the efficiency could be related to the amount of polydimethylsiloxane (PDMS) in each extraction device. However, all of the techniques provide data that shows that the leachability of lindane is dependent on the amount of organic matter contained in the matrix.The results of the lindane leachability assay were compared to the bioavailability of lindane, which was determined by measuring the amount of lindane that accumulated in the roots of wheat plants grown in similar soil-biosolid systems.It was confirmed that the amount of organic matter in the matrix is a determining factor for lindane immobilization. The presence of biosolids decreases the mobility of lindane in all of the systems under study. Similarly, increasing biosolid concentrations in the soil significantly decreased the bioavailability of lindane and, consequently, plant absorption.The good correlation (R² = 0.997) between the leachability of lindane from the matrix and plant absorption of lindane indicates that the proposed biomimetic methodology can predict the bioavailability of lindane in a time period as short as 7 d.The results of this work confirm that amending contaminated soils with biosolids is beneficial for immobilizing lindane and helps prevent the percolation of lindane through the soil profile and into groundwater.