Local governing of climate change in Denmark: recasting citizens as consumers

This paper is concerned with the ways in which Danish municipalities seek to mitigate climate change through a range of governance strategies. Through the analysis of ten municipal climate plans using the framework of Mitchell Dean, as well as extensive ethnographic fieldwork in two municipalities, this paper explores how local climate change mitigation is shaped by particular rationalities and technologies of government, and thus seeks to illustrate how the strategies set out in the plans construe climate change mitigation from a certain perspective, thereby rendering some solutions more likely than others and recasting citizens as passive consumers who are to be guided to consume in more climate-friendly ways in the process.     

Long-term engineering properties of recycled plastic lumber used in pier construction

Plastic lumber manufactured using post consumer waste plastic has been proposed as an acceptable material for use in the construction of docks, piers and bulkheads and is touted to outlast conventional wood products due to its strength, durability and resistance to rot. This study examines the long-term engineering properties of plastic lumber manufactured using post consumer waste plastic (TRIMAX, Ronkonkoma, NY). Plastic lumber profiles were used in the decking of a pier built in West Meadow Creek, Old Field, NY during December 1995. Samples of plastic lumber were removed from the deck of the pier periodically over a two-year period and returned to the laboratory for testing. Results of engineering tests showed the in-plane compression modulus (260±30 MPa), dimensional stability and the Shore D surface hardness (60±2) of plastic lumber removed from the pier remained similar to or greater than their pre-placement values. In contrast, significant changes in the modulus of elasticity of plastic lumber were measured with prolonged weathering. The modulus of elasticity of plastic lumber initially decreased from 1370 Pa to 750 Pa following 12 months weathering, a decrease equal to 45% of its pre-placement value and then increased during the second year to close to its initial value. The high variability in the modulus of elasticity should restrict the use of plastic lumber profiles to non-load bearing structural applications.     

Assessment of plastic packaging waste: Material origin,methods, properties

The global plastics production has increased annually and a substantial part is used for packaging (in Europe 39%). Most plastic packages are discarded after a relatively short service life and the resulting plastic packaging waste is subsequently landfilled, incinerated or recycled. Laws of several European and Asian countries require that plastic packaging waste collected from households has to be sorted, reprocessed, compounded and reused. These recycling schemes typically produce milled goods of poly(ethylene terephthalate) (PET), poly(ethylene) (PE), isotactic poly(propylene) (PP), mixed plastics, and agglomerates from film material. The present study documents the composition and properties of post-consumer polyolefin recyclates originating from both source separation and mechanical recovery from municipal solid refuse waste (MSRW). The overall composition by Fourier transform-infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC) were determined and compared with the sorting results of the sorted fractions prior to the reprocessing into milled goods. This study shows that the collection method for the plastic packaging waste has hardly any influence on the final quality of the recyclate; however, the sorting and reprocessing steps influence the final quality of the recyclate. Although the mechanical properties of recyclate are clearly different than those of virgin polymers, changes to the sorting and reprocessing steps can improve the quality.     

Cost-efficiency in packaging waste management: The case of Belgium

In order to exploit economies of scale Belgian municipalities regularly cooperate in the provision of waste related services. In particular for the collection and separation of household packaging waste, municipalities appear to seek technical and cost efficiency gains by cooperating via municipal waste joint ventures. Although most Belgian municipal waste joint ventures can present excellent recycling and recovery rates for household packaging waste, their performance in terms of cost-efficiency has never been assessed. Using a unique dataset comprising of the costs for all 35 Belgian municipal waste joint ventures in 2010, this paper present the first assessment of the cost efficiency of household packaging waste collection in Belgium. As we are not sure on the relative importance of the separate cost efficiency scores for the three selectively collected household packaging waste fractions when determining the overall cost efficiency, this paper draws on the Benefit-of-the-Doubt approach. Our results indicate that, despite the substantial cooperation between municipalities, still considerable differences in cost efficiency for household packaging waste collection exist.     

Responses of community to the possible use of recycled water for washing machines: A case study in Sydney, Australia

Recycled water is a valuable resource that has potential to free up potable water supplies and recharge systems while improving the environment. Recycled water for washing machine could be one of the options as new end use of recycled water to alleviate the demand on existing and limited water supplies. This paper summarizes the findings of a research survey in Sydney, Australia to explore the attitudes and opinions of community towards the use of recycled water for different purposes, especially for the washing machine. The survey showed that 97% of the respondents were aware of the persisting water shortage problem while more than 60% of the respondents supported the use of recycled water for washing clothes. This paper exposes the basic concern of participants for using recycled water in washing machine. Health issue was found as the most concerns of the community. The survey also presents the further conditions to be considered for using recycled water for washing machine according to the participants’ opinions. Correlation between knowledge and attitudes of respondents was also found in this survey.     

中原油田总机厂镍磷化学镀废水治理

利用价廉、来源广的石灰复配聚丙烯酰胺（ＰＡＭ）作为絮凝剂，处理镍磷化学镀废水。实验结果表明：石灰复配ＰＡＭ，明显加快絮体的沉降速度并减少絮体的体积，经处理后水质符合外排标准，处理费用大幅度下降，是一种经济可行的方法。根据实验结果为中原油田总机厂设计出镍磷化学镀废水治理方案。     

The potential contribution of sustainable waste management to energy use and greenhouse gas emission reduction in the Netherlands

Future limitations on the availability of selected resources stress the need for increased material efficiency. In addition, in a climate-constrained world the impact of resource use on greenhouse gas emissions should be minimized. Waste management is key to achieve sustainable resource management. Ways to use resources more efficiently include prevention of waste, reuse of products and materials, and recycling of materials, while incineration and anaerobic digestion may recover part of the embodied energy of materials. This study used iWaste, a simulation model, to investigate the extent to which savings in energy consumption and CO₂ emissions can be achieved in the Netherlands through recycling of waste streams versus waste incineration, and to assess the extent to which this potential is reflected in the LAP2 (currently initiated policy). Three waste streams (i.e. household waste, bulky household waste, and construction and demolition waste) and three scenarios compare current policy to scenarios that focus on high-quality recycling (Recycling+) or incineration with increased efficiency (Incineration+). The results show that aiming for more and high-quality recycling can result in emission reductions of 2.3 MtCO₂ annually in the Netherlands compared to the reference situation in 2008. The main contributors to this reduction potential are found in optimizing the recycling of plastics (PET, PE and PP), textiles, paper, and organic waste. A scenario assuming a higher energy conversion efficiency of the incinerator treating the residual waste stream, achieves an emission reduction equivalent to only one third (0.7 MtCO₂/year) of the reduction achieved in the Recycling+ scenario. Furthermore, the results of the study show that currently initiated policy only partially realizes the full potential identified. A focus on highest quality use of recovered materials is essential to realize the full potential energy and CO₂ emission reduction identified for the Netherlands. Detailed economic and technical analyses of high quality recycling are recommended to further evaluate viable integrated waste management policies.     

Evaluating the potential of biodiesel (via recycled cooking oil) use in Singapore,an urban city

Singapore has pledged to attain 7–11% Business-As-Usual carbon emissions reduction by 2020. About 19% of CO₂ contribution stemmed from road transport in 2005. Commercial vehicles, which uses mainly diesel, consumed 695 million litres diesel in 2012. An estimated 115,585 tonnes or 127 million litres cooking oils (derived from seeds/fruits) were consumed in 2010, in which the bulk of used cooking oil is re-incorporated into the food preparation process while only a small amount is being recycled into biodiesel or disposed into the sewerage. Nevertheless, the present research reveals that biodiesel derived from spent cooking oil has potential to be a viable fuel supplement. Surveys were carried out involving three market segments – suppliers, processors and end-users – to identify the barriers and obstacles in mass production of biodiesel. A key enabler of biodiesel as a fuel supplement towards a greener environment lies in government mandate/policies in promoting greater biodiesel usage.     

Spaghetti soup: The complex world of food waste behaviours

There is growing awareness of the positive impact of reducing the amount of wasted food on greenhouse gas emissions, energy use, food and water security, and land use. In developed nations, food waste generated in homes is a large contributor to the total amount of food waste. The behaviours and practices associated with this waste prevention (and waste generation) are complex for a number of reasons: food waste is the result of multiple, interacting activities and this leads to separation between the activity and their consequences. These behaviours are usually performed for reasons unrelated to waste prevention and have both a marked habitual element and a pronounced emotional component. Furthermore, the prevention of food waste has less ‘visibility’ to other people (e.g. neighbours) than many other pro-environmental behaviours (e.g. recycling), and therefore social norms around ‘waste’ play a reduced role compared to more ‘visible’ activities.This paper discusses insights into these behaviours from research funded by the Waste & Resources Action Programme (WRAP) and its partners in the UK. It discusses how these insights have been used in the development of a successful public-engagement campaign, which has been influential in the recent reduction in household food waste. These insights are also discussed in light of commonly used behavioural models, highlighting that many of these models are not designed for multiple, complex behaviours. However, considering the subject of food waste through the ‘lenses’ of different academic disciplines has helped the development of the public engagement on this issue.     

The economics of waste disposal in the UK

The author takes a simplified look at the structure of waste disposal costs in the UK. The immediate impression is that landfill costs are so significantly cheaper than other disposal options, on average, that considerable escalation in landfill costs, for whatever reason, would be needed to make it lose its predominance. The analysis also demonstrates that the more futuristic technologies may well have a role to play provided the initial estimates of per tonne costs are borne out by commercial ventures.     

An analysis of the use of life cycle assessment for waste co-incineration in cement kilns

Life cycle assessment, LCA, has become a key methodology to evaluate the environmental performance of products, services and processes and it is considered a powerful tool for decision makers. Waste treatment options are frequently evaluated using LCA methodologies in order to determine the option with the lowest environmental impact. Due to the approximate nature of LCA, where results are highly influenced by the assumptions made in the definition of the system, this methodology has certain non-negligible limitations. Because of that, the use of LCA to assess waste co-incineration in cement kilns is reviewed in this paper, with a special attention to those key inventory results highly dependent on the initial assumptions made. Therefore, the main focus of this paper is the life cycle inventory, LCI, of carbon emissions, primary energy and air emissions. When the focus is made on cement production, a tonne of cement is usually the functional unit. In this case, waste co-incineration has a non-significant role on CO₂ emissions from the cement kiln and an important energy efficiency loss can be deduced from the industry performance data, which is rarely taken into account by LCA practitioners. If cement kilns are considered as another waste treatment option, the functional unit is usually 1 t of waste to be treated. In this case, it has been observed that contradictory results may arise depending on the initial assumptions, generating high uncertainty in the results. Air emissions, as heavy metals, are quite relevant when assessing waste co-incineration, as the amount of pollutants in the input are increased. Constant transfer factors are mainly used for heavy metals, but it may not be the correct approach for mercury emissions.     

A review on the use of waste glasses in the production of cement and concrete

The use of recycled waste glasses in Portland cement and concrete has attracted a lot of interest worldwide due to the increased disposal costs and environmental concerns. Being amorphous and containing relatively large quantities of silicon and calcium, glass is, in theory, pozzolanic or even cementitious in nature when it is finely ground. Thus, it can be used as a cement replacement in Portland cement concrete. The use of crushed glasses as aggregates for Portland cement concrete does have some negative effect on properties of the concrete; however, practicle applicability can still be produced even using 100% crushed glass as aggregates. The main concerns for the use of crushed glasses as aggregates for Portland cement concrete is the expansion and cracking caused by the glass aggregates. This paper summarizes the progresses and points out the directions for the proper uses of waste glasses in Portland cement and concrete.     

Wasting women: The environmental justice of including women in municipal waste management

This paper explores the opportunities for and the benefits of considering gender in municipal waste management (MWM) policy. Two case studies in Ireland and the UK are presented. These show that the structural mechanisms for achieving a more consistent and coherent approach to ensuring that MWM policy is sensitive to gender differences and inequalities are still weak. They also show that political structures and champions for gender equality and equal opportunities make a difference to the way in which women are involved and considered in MWM policy making. The research is set within the broader context of environmental justice which, to date, has been more concerned with race, ethnicity and wealth inequalities than with gender inequalities.     

Evaluation of guild-indicator species for use in resource management

We followed selection guidelines commonly used by management agencies to select mountain quail (Oreortyx pictus) as an indicator species for an ecological guild of birds. We then evaluated the ability of mountain quail to indicate the presence of other species from the guild and to index the quality of the habitat for other species. The ability of quail to indicate the presence of species from the ecological guild varied widely within and among vegetation types. Species compositions of the ecological guild were more consistent in comparisons of sites within vegetation types than they were in comparisons of sites between vegetation types. Mountain quail habitat was significantly different from the habitats of sympatric species from the guild for 14 of 15 multivariate contrasts. We suggest that managers use indicator species with caution. If indicators are used, they should be applied to guilds composed of species that closely share ecological affinities. The habitat of the indicator species should overlap extensively with those of all other guild members. The use of indicators should be restricted to very similar sites within the same general vegetation type.     

The future place of recycling in household waste policy: the case of France

To be rightly implemented, an environmental policy ought to set an institutional framework (goals, rules and instruments) which incents decentralised actors to adopt the appropriate range of technologies. In the household waste management policy, the development of valorisation techniques (and particularly recycling) must be supported by convenient instruments and incentives. The paper analyses the problems encountered with the French household waste policy to ensure the takeoff of recycling techniques. At the moment, a rather under-proportioned institutional setting leads to favour the adoption of incineration with energy recovery at the expenses of recycling. This tends to create a structural bias in favour of incineration.     

污水深度处理系统在油田污水处理中的应用分析

乐安油田是通过蒸汽吞吐减轻原油粘度进行开采的稠油油田。针对其特点,借鉴美国、加拿大污水回用的成功经验和先进技术,建成投产了国内第一座也是最大的一座油井采出水回用于湿蒸汽发生器的大型泵站 ── 乐安污水深度处理站。文章详细介绍了污水深度处理系统以及运行2年来所取得的成果,证明油田采出水深度处理后回用于湿蒸汽发生器技术是完全可行并易于操作的。     

The governance of waste management in urban Tanzania: towards a community based approach

Solid waste management in urban areas in Tanzania is examined from a governance point of view. Capitalising on the case of the Dar es Salaam City Council, governance is seen in terms of central–local government relationship and the relationship between local government and international, national, and community institutions and stakeholders. Major impediments to waste management in urban Tanzania include corruption, poor relations between the politicians and the general population, politics of privatisation, and political apathy. Lack of resources is seen as the least important of all the impediments. An evaluation of the governance of waste management with respect to public participation, privatisation, citizen-rights, accountability and transparency and financial efficiency is discussed. Management of solid wastes in Dar es Salaam and other urban centres in Tanzania should shift from command-and-control approaches to systems of partnerships between the public authorities and the various stakeholders on the urban scene. A community-based solid waste management approach is suggested for wider adoption. The strategic approach to this non-conventional method should be carried out through four steps: elaboration, trial, evaluation and extension to other neighbourhoods.     

The fate of heavy metals in green waste composting

It has long been known that heavy metals, when in high enough concentration, have the potential to be both phytotoxic and zootoxic. Heavy metals are frequently found as contaminants in green waste. Any such waste that is subsequently segregated for composting theoretically has the potential to retain that possible contamination. To date, there have been a limited number of publications addressing this issue. Most reports have concentrated on the types of heavy metals found in compost and their acceptable levels, rather than the fate of heavy metal contaminants throughout the composting process. This investigation was aimed to identify the fate of cadmium (Cd), copper (Cu), chromium (Cr), lead (Pb) and zinc (Zn) concentrations throughout a fourteen week composting cycle. The results of this study showed a general increase in the removal of Pb, Cu, Cr, and to a much smaller extent Zn, manifested by a decrease in their overall concentrations within the solid fraction of the final product, by 93, 49, 43, and 20 percent respectively. By contrast, there was no decrease in the overall concentration of Cd.