Distribution of polycyclic aromatic hydrocarbons in water, suspended particulate matter and sediment from Daliao River watershed, China

This study investigated the spatial distribution of polycyclic aromatic hydrocarbons (PAHs) in surface water, suspended particulate matter (SPM) and sediment of Daliao River watershed composed of the Hun River, Taizi River, and Daliao River. The sources of PAHs were evaluated employing ratios of specific PAHs compounds and principal component analysis (PCA). The total concentrations of PAHs ranged from 946.1 to 13448.5 ng l(-1) in surface water, from 317.5 to 238518.7 ng g(-1) dry weight in SPM, and from 61.9 to 840.5 ng g(-1) dry weight in sediments. The levels of PAHs are relatively higher in water and SPM, and lower in sediments, in comparison with those reported for other rivers and marine systems around the world. The composition of PAHs in these mediums was mainly 4-6 rings PAHs. The higher contents of low molecular weight PAHs in the water and SPM suggest a relatively recent local source of PAHs, entered into the river via wastewater discharge and atmospheric way. On the other hand, the heavy pollution of PAHs in sediment and water near heavy industrial area suggests that PAHs have been released from industrial wastewater.     

Distribution patterns of nitrobenzenes and polychlorinated biphenyls in water, suspended particulate matter and sediment from mid- and down-stream of the Yellow River (China)

Samples of water, suspended particulate matter (SPM) and sediment were collected from mid- and down-stream of the Yellow River. The distribution and concentration of 10 nitroaromatic compounds and polychlorinated biphenyls (PCBs) were extensively studied. The total concentration of 10 nitrobenzenes (SigmaNBs) varied from 0.269 to 9.052 microg l(-1) in water, from 2.916 to 164.4 microg kg(-1) dry weight in SPM, and from 0.954 to 14.72 microg kg(-1) dry weight in sediment. PCBs associated with the sediments, measured as the summed responses of Aroclor 1242, 1248, 1254, 1260 (in comparison to those of a standard 1:1:1:1 mixture), were found to be in the range of non-detectable to 5.98 microg kg(-1). In the samples collected, various PCB congeners showed similar distribution characteristics with congeners containing 3-5 chlorine atoms accounting for more than 96.4% of total PCB. In most of the samples, PCB concentrations occurred in the order: TetraCB > TriCB > PentaCB. Levels of SigmaNBs in the Yellow River were relatively low in comparison with values reported from other river and marine systems, and PCB levels were comparatively low. Relative to the PCBs, SigmaNBs showed significantly more difference among the various stations, presumably due to the influence of different pollution sources. No obvious correlation was observed between the pollutant concentrations and either the TOC or the grain size of the sediments.     

Distribution,source, and environmental risk assessment of phthalate esters (PAEs) in water,suspended particulate matter,and sediment of a typical Yangtze River Delta City,China

Phthalates (PAEs) in drinking water sources such as the Yangtze River in developing countries had aroused widespread concern. Here, the water, suspended particulate matter (SPM), and sediment samples were collected from 15 sites in wet and dry seasons in Zhenjiang, for the determination of six PAEs (DMP, DEP, DIBP, DBP, DEHP, and DOP) using the solid-phase extraction (SPE) or ultrasonic extraction coupled with gas chromatography-mass spectrometry (GC-MS). The total concentrations of six PAEs (Σ₆PAEs) spanned a range of 2.65–39.31 μg L^?1 in water, 1.97–34.10 μg g^?1 in SPM, and 0.93–34.70 μg g^?1 in sediment. The partition coefficients (K_d1) of PAEs in water and SPM phase ranged from 0.004 to 3.36 L g^?1 in the wet season and from 0.12 to 2.84 L g^?1 in the dry season. K_d2 of PAEs in water and sediment phase was 0.001–9.75 L g^?1 in the wet season and 0.006–8.05 L g^?1 in the dry season. The dominant PAEs were DIBP, DBP, and DEHP in water and SPM, DIBP, DEHP, and DOP in sediment. The concentration of DBP in water exceeded the China Surface Water Standard. The discharge of domestic sewage and industrial wastewater might be the main potential sources of PAEs. The risk quotient (RQ) method used for the risk assessment revealed that DBP (0.01 < RQ < 1) posed a medium risk, while DIBP and DEHP (RQ > 1) posed a high environmental risk in water, DIBP (RQ > 1) also showed a high risk in sediment.

     

Quantifying the sources of hazardous elements of suspended particulate matter aerosol collected in Yokohama,Japan

We analyzed metals (Mg, Al, Ca, V, Cr, Mn, Ni, Cu, Zn, Ga, As, Se, Rb, Sr, Ag, Cd, Cs, Ba, Pb and Bi), water-soluble ions (Na⁺, NH₄⁺, K⁺, Ca²⁺, Cl^?, NO₃^? and SO₄^2?) and carbonaceous mass (EC and OC) in SPM aerosol samples using an ICP-MS, ion chromatograph and CHN corder, respectively. The SPM samples were collected from 1999 to 2005 at two locations (urban site A and industrial site B) of Yokohama, Japan with concentrations in mean and ranges of 34.2 and 19.7–50.3 μg m^?3 and 22.9 and 12.7–35.1 μg m^?3 for the respective location. Source apportionment of SPM aerosol was conducted appropriately for the first time to these locations employing PCA-APCS technique. Major sources of SPM at site A were a) crustal source, b) urban origin, c) undefined, and d) mineral rock. At site B, the sources were predicted as a) urban origin, b) undefined, c) crustal source, and d) secondarily formed aerosol. The tracers and nature of the source related to urban origin at both sites were similar but retaining different source strength. Secondarily formed aerosol was quite unique at site B. However, mineral rock was remarkable at site A.     

Polycyclic aromatic hydrocarbons in the urban atmospheric particulate matter in the city of Naples (Italy)

An investigation on PAH in the atmospheric particulate matter of the city of Naples has been carried out. Urban atmospheric particulate matter was sampled in three sampling sites (West, East and central areas of the city), whose characteristics were representative of the prevailing conditions. In each site, 24 h samplings for 7 consecutive days were performed during three sampling campaigns, in 1996–1997. The results were comparable with those reported in literature for similar investigations. Total PAH were in the range 2–130 ng m⁻³, with a seasonal variation (autumn/winter vs. summer) in the range 1.5–4.5. The relative contribution of diesel engines vs. gasoline fuelled engines was evidenced.     

HPLC-PFD determination of priority pollutant PAHs in water,sediment, and semipermeable membrane devices

High performance liquid chromatography coupled with programmable fluorescence detection was employed for the determination of 15 priority pollutant polycyclic aromatic hydrocarbons (PPPAHs) in water, sediment, and semipermeable membrane devices (SPMDs). Chromatographic separation using this analytical method facilitates selectivity, sensitivity (ppt levels), and can serve as a non-destructive technique for subsequent analysis by other chromatographic and spectroscopic techniques. Extraction and sample cleanup procedures were also developed for water, sediment, and SPMDs using various chromatographic and wet chemical methods. The focus of this publication is to examine the enrichment techniques and the analytical methodologies used in the isolation, characterization, and quantitation of 15 PPPAHs in different sample matrices.     

A multi-approach monitoring of particulate matter, metals and PAHs in an urban street canyon

For the first time until now, the results from a prediction model (Atmospheric Dispersion Modelling System (ADMS)-Road) of pollutant dispersion in a street canyon were compared to the results obtained from biomonitors. In particular, the instrumental monitoring of particulate matter (PM10) and the biomonitoring of 14 polycyclic aromatic hydrocarbons (PAHs) and 11 metals by Quercus ilex leaves and Hypnum cupressiforme moss bags, acting as long- and short-term accumulators, respectively, were carried out. For both PAHs and metals, similar bioaccumulation trends were observed, with higher concentrations in biomonitors exposed at the leeward canyon side, affected by primary air vortex. The major pollutant accumulation at the leeward side was also predicted by the ADMS-Road model, on the basis of the prevailing wind direction that determines different exposure of the street canyon sides to pollutants emitted by vehicular traffic. A clear vertical (3, 6 and 9 m) distribution gradient of pollutants was not observed, so that both the model and biomonitoring results suggested that local air turbulences in the street canyon could contribute to uniform pollutant distribution at different heights.     

Bioaccumulation of dichlorodiphenyltrichloroethanes (DDTs) in carp in a water/sediment microcosm: important role of sediment particulate matter and bioturbation

Environmental Science and Pollution Research - Sediments are reservoirs and sources of DDTs to the aquatic ecosystem. However, the role of sediment particulate matter and benthic organisms in...     

Source apportionment of ambient total suspended particulates and coarse particulate matter in urban areas of Jiaozuo, China

Approximately 750 total suspended particulates (TSPs) and coarse particulate matter (PM10) filter samples from six urban sites and a background site and >210 source samples were collected in Jiaozuo City during January 2002 to April 2003. They were analyzed for mass and abundances of 25 chemical components. Seven contributive sources were identified, and their contributions to ambient TSP/PM10 levels at the seven sites in three seasons (spring, summer, and winter days) and a "whole" year were estimated by a chemical mass balance (CMB) receptor model. The spatial TSP average was high in spring and winter days at a level of approximately 530 microg/m(3) and low in summer days at 456 microg/m(3); however, the spatial PMo0 average exhibited little variation at a level of approximately 325 microg/m(3), and PM10-to-TSP ratios ranged from 0.58 to 0.81, which suggested heavy particulate matter pollution existing in the urban areas. Apportionment results indicated that geological material was the largest contributor to ambient TSP/PM10 concentrations, followed by dust emissions from construction activities, coal combustion, secondary aerosols, vehicle movement, and other industrial sources. In addition, paved road dust and re-entrained dust were also apportioned to the seven source types and found soil, coal combustion, and construction dust to be the major contributors.     

PCDDs/PCDFs and coplanar PCBs in eels (Anguilla anguilla) from different areas of the rivers Havel and Oder in the state of Brandenburg (Germany)

In 1996 forty-nine eels were caught from different locations along the rivers Oder (Hohenwutzen and Schwedt) and from 11 locations along the Havel river. They were analysed for PCDDs/PCDFs and the coplanar PCBs (PCB 77, PCB 126, PCB 169). Their contribution to 2,3,7,8-TCDD equivalents were estimated. In case of PCDDs/PCDFs these amounted between 1.8 and 15.2 pg/g fat (mean 6.1 pg/g; median 5.2 pg/g), in case of coplanar PCBs between 2.4 and 170.5 pg/g fat (mean 47.7 pg/g; median 36.1 pg/g). Lakes which are associated with but not directly located at the main stream of the river Havel contributed much less to contamination of the eels than the river segments situated in the more urbanised or industrialised sites along the main river.     

南昌市大气PM2.5中多环芳烃的来源解析

在南昌市布设5个采样点,分别代表工业区、居住区、交通干线区、商业区以及郊区,于2007年7～8月进行大气PM2.5的采样.根据5个采样点测得的数据,通过因子分析法判断南昌市大气PM2.5中多环芳烃的主要来源,再利用多元线性回归法确定各主要来源对多环芳烃的贡献率.结果表明,南昌市多环芳烃的主要来源为车辆排放源、高温加热源、燃煤污染源,对多环芳烃的贡献率分别为37.9%、28.2%、22.0%.     

Polycyclic aromatic hydrocarbons in suspended particulate matter and sediments from the Pearl River Estuary and adjacent coastal areas, China

The spatial distribution, composition, and sources of polycyclic aromatic hydrocarbons (PAHs) in sediments and suspended particulate matter (SPM) from the Pearl River Estuary and adjacent coastal areas were examined. Total PAH concentrations varied from 189 to 637 ng/g in sediments and 422 to 1,850 ng/g in SPM. PAHs were dominated by 5,6-ring compounds in sediments and by 2,3-ring compounds in SPM samples. Assessment of PAH sources suggested that biomass and coal combustion is the major PAH source to the outer part of the estuary sediments and that petroleum combustion is the major PAH source to the inner part of estuary sediments. As for SPM samples, PAH isomer pair ratios indicated multiple (petroleum, petroleum combustion, and biomass and coal combustion) PAH sources, and significant temporal variations could exist for the sources of water column PAHs in the study area. The distribution of perylene in SPM samples indicated that the river was the dominant source of perylene in SPM and that perylene could be taken as an index to assess the contribution of river inflow to the total PAHs in SPM samples. The high concentration of perylene in the sediment was indicative of an in situ biogenic origin.     

Modelling the transport of suspended particulate matter by the Rhone River plume (France). Implications for pollutant dispersion

A model to simulate the transport of suspended particulate matter by the Rhone River plume has been developed. The model solves the 3D hydrodynamic equations, including baroclinic terms and a 1-equation turbulence model, and the suspended matter equations including advection/diffusion of particles, settling and deposition. Four particle classes are considered simultaneously according to observations in the Rhone. Computed currents, salinity and particle distributions are, in general, in good agreement with observations or previous calculations. The model also provides sedimentation rates and the distribution of different particle classes over the sea bed. It has been found that high sedimentation rates close to the river mouth are due to coarse particles that sink rapidly. Computed sedimentation rates are also similar to those derived from observations. The model has been applied to simulate the transport of radionuclides by the plume, since suspended matter is the main vector for them. The radionuclide transport model, previously described and validated, includes exchanges of radionuclides between water, suspended matter and bottom sediment described in terms of kinetic rates. A new feature is the explicit inclusion of the dependence of kinetic rates upon salinity. The model has been applied to 137Cs and 239,240Pu. Results are, in general, in good agreement with observations.     

First report on the uptake of automobile catalyst emitted palladium by European eels (Anguilla anguilla) following experimental exposure to road dust.

Following the introduction of automobile catalysts in the middle of the 1980s in Germany there is an increasing emission of the platinum-group-metals platinum, palladium (Pd) and rhodium. Still, it remains unclear if these metals are bioavailable for aquatic animals and to which extent they become accumulated by the aquatic biosphere. Because of analytical problems in detecting Pd in small biological samples the present investigation concentrates on the bioavailability of this metal. To answer the question of a Pd uptake by aquatic organisms experimental studies were conducted with European eels maintained in water containing road dust at a concentration of 10 kg/100 l. Following an exposure period of four weeks, samples of liver and kidney were analysed by total-reflection X-ray fluorescence analysis after co-precipitation of Pd with mercury. These experiments revealed an uptake of traffic related Pd by European eels which showed a mean liver Pd concentration of 0.18 +/- 0.05 ng/g (wet wt.), whereas the Pd concentration in the kidney ranged below the detection limit. Thus, in this study we can demonstrate for the first time that automobile catalyst emitted Pd is bioavailable for aquatic animals.     

Size distribution and source identification of total suspended particulate matter and associated heavy metals in the urban atmosphere of Delhi

A study of the atmospheric particulate size distribution of total suspended particulate matter (TSPM) and associated heavy metal concentrations has been carried out for the city of Delhi. Urban particles were collected using a five-stage impactor at six sites in three different seasons, viz. winter, summer and monsoon in the year 2001. Five samples from each site in each season were collected. Each sample (filter paper) was extracted with a mixture of nitric acid, hydrochloric acid and hydrofluoric acid. The acid solutions of the samples were analysed in five-particle fractions by atomic absorption spectrometry (AAS). The impactor stage fractionation of particles shows that a major portion of TSPM concentration is in the form of PM0.7 (i.e. <0.7microm). Similarly, the most of the metal mass viz. Mn, Cr, Cd, Pb, Ni, and Fe are also concentrated in the PM0.7 mode. The only exceptions are size distributions pertaining to Cu and Ca. Though, Cu is more in PM0.7 mode, its presence in size intervals 5.4-1.6microm and 1.6-0.7microm is also significant, whilst in case of Ca there is no definite pattern in its distribution with size of particles. The average PM10.9 (i.e. <10.9microm) concentrations are approximately 90.2%+/-4.5%, 81.4%+/-1.4% and 86.4%+/-9.6% of TSPM for winter, summer and monsoon seasons, respectively. Source apportionment reveals that there are two sources of TSPM and PM10.9, while three and four sources were observed for PM1.6 (i.e. <1.6microm) and PM0.7, respectively. Results of regression analyses show definite correlations between PM10.9 and other fine size fractions, suggesting PM10.9 may adequately act as a surrogate for both PM1.6 and PM0.7, while PM1.6 may adequately act as a surrogate for PM0.7.     

Source apportionment of particulate matter in a large city of southeastern Po Valley (Bologna, Italy)

This study reports the results of an experimental research project carried out in Bologna, a midsize town in central Po valley, with the aim at characterizing local aerosol chemistry and tracking the main source emissions of airborne particulate matter. Chemical speciation based upon ions, trace elements, and carbonaceous matter is discussed on the basis of seasonal variation and enrichment factors. For the first time, source apportionment was achieved at this location using two widely used receptor models (principal component analysis/multi-linear regression analysis (PCA/MLRA) and positive matrix factorization (PMF)). Four main aerosol sources were identified by PCA/MLRA and interpreted as: resuspended particulate and a pseudo-marine factor (winter street management), both related to the coarse fraction, plus mixed combustions and secondary aerosol largely associated to traffic and long-lived species typical of the fine fraction. The PMF model resolved six main aerosol sources, interpreted as: mineral dust, road dust, traffic, secondary aerosol, biomass burning and again a pseudo-marine factor. Source apportionment results from both models are in good agreement providing a 30 and a 33 % by weight respectively for PCA-MLRA and PMF for the coarse fraction and 70 % (PCA-MLRA) and 67 % (PMF) for the fine fraction. The episodic influence of Saharan dust transport on PM₁₀ exceedances in Bologna was identified and discussed in term of meteorological framework, composition, and quantitative contribution.     

Characterisation of PM10 and PM2.5 particulate matter in the ambient air of Milan (Italy)

24-h simultaneous samplings of PM10 and PM2.5 particulate matter (PM) have been carried out during the period December 1997–September 1998 in the central urban area of Milan. The mass concentrations of the two fractions showed significant daily variations linked to different thermodynamic conditions of the planetary boundary layer (PBL) and characterised by higher values during wintertime. The elemental composition, determined by energy dispersive X-ray fluorescence technique, was quite different in the two fractions: in the finer one the presence of elements with crustal origin is reduced while the anthropogenic elements, with a relevant environmental and health impact, appear to be enriched. The composition data allowed a quantification of two major components of the atmospheric particulate: sulphates (mainly of secondary origin) and particles with crustal origin. An important but unmeasured component is likely constituted by organic and elemental carbon compounds.The multivariate analysis of elements, gaseous pollutants and mass concentration data-sets leads to the identification of four main sources contributing to PM10 and PM2.5 composition: vehicles exhaust emissions, resuspended crustal dust, secondary sulphates and industrial emissions. The existence of a possible background component with non-local origin is also suggested.     

Distribution and heavy metal pollution of the suspended particulate matter on the barcelona continental shelf (North-Western Mediterranean)

The distribution of heavy metal pollution associated with suspended particulate matter on the Barcelona continental shelf has been studied to evaluate the environment l impact of anthropogenic metals in this Mediterranean area. The main sources of heavy metal pollution on this continental shelf are the Besós River and the sewage sludge produced in the Barcelona-Besós wastewater treatment plant. The levels of Pb, Cr, Cu, Cd and Ni are very high around the mouths of the river and the pipeline of the wastewater treatment plant. The highest suspended sediment and heavy metal concentrations are along the inner and mid-shelf due to aggregation processes and the low energy of the dominant currents flowing in the study area. However, a significant amount of polluted suspended sediment is transferred to the slope by advective processes. This amount may be increased significantly by the action of wave-induced currents during strong storms. Trawl fishing may also contribute to the shelf-slope transfer of contaminated particles.     

Temporal trends of elements in Turin (Italy) atmospheric particulate matter from 1976 to 2001

The temporal trends of major, minor and trace elements in the total atmospheric particulate sampled in the urban area of Turin (Italy) were determined for the following years: 1976, 1986, 1996 and 2001. The wavelength dispersive X-ray fluorescence (WD-XRF) technique was adopted to determine the concentrations of Ba, Br, Ca, Cl, Cr, Cu, Fe, K, Mg, Mn, Ni, Pb, S, Ti and Zn. A smaller number of samples was also analysed by ICP atomic emission spectroscopy (ICP-AES) and the results were compared with those obtained by WD-XRF to confirm their validity. A clear seasonal pattern with higher concentrations of the aforementioned elements in the cold periods was observed. Moreover, a change in the chemical composition of atmospheric particulate matter was evidenced, particularly between the first (1976 and 1986) and the last (1996 and 2001) years. This change can be attributed both to the greater contribution of Pb and Br to atmospheric pollution in the past and, in recent years, to the higher level of pollutants associated with increased vehicular traffic and industrial activities. The application of chemometric techniques (Principal Component Analysis and Cluster Analysis) allowed us to speculate about the main emitting sources influencing the total atmospheric particulate in these years.