Integrating waste, manufacturing and industrial symbiosis: an analysis of recycling, remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

Integrating waste,manufacturing and industrial symbiosis: an analysis of recycling,remanufacturing and waste treatment firms in Texas

The continually increasing volume of the waste stream has led to numerous calls for strategies to close the loop on material use through industrial symbiosis strategies which direct used material and products (wastes) back to production processes. By use of a survey of recycling, remanufacturing and waste treatment firms in Texas, this paper asks if these firms can operate as a bridge between production and consumption/waste to efficiently increase the flow of used materials and products back to production processes at the local level. The results suggest that while most materials and used products are collected locally, only some can be re(consumed) locally. Moreover, the firms face negative perceptions about their activities from industry and the public at large that likely slow both the rate of entry of new firms into these markets and the expansion possibilities of existing firms. In addition, the types of conventions that characterize the interactions of more successful firms are not well developed in this sector(s). It is unlikely that recycling, remanufacturing and waste treatment firms can become central players in the production, consumption and waste cycle loop until society develops production design, marketing and consumption philosophies that include recycling and remanufacturing at a fundamental level.     

Pilgrimage route recovery in an industrial landscape

Pilgrimage is an activity having a long tradition within the European historical context, and it has contributed to the overall spiritual aspect of European landscapes. Since the nineteenth century, however, the mining industry has strongly transformed many of those landscapes. The intangible cultural and spiritual values have been neglected in the process of mine rehabilitation. The aim of the present paper is to introduce a methodological approach to recovering the pilgrimage tradition in a post-mining landscape. The approach was developed in a case study regarding recovery of the Czech Republic's Osek–Mariánské Rad?ice pilgrimage route. Applying the principles of preservation, paraphrasing, evocation, and a new structure, the methodological framework for pilgrimage route recovery was designed and a variety of methodological issues regarding conflict between industrialism and the holy spirit of the original landscape were addressed.     

Recovery of foundry sands and iron fractions from an industrial waste landfill

This study was performed to analyse the technical and economical feasibility of a project concerning the recovery of foundry wastes from a landfill. In such a context, an evaluation of the total amount of residues that could be recovered was performed by using the physical chemical characterization of landfilled wastes: molding and core sands, furnace dusts, finishing dusts, muds, calcium hydroxide and refractory slags. Field tests were realized employing both geophysical methods both the digging of trenches.Two cells of the landfill were investigated by means of geophysical methods using magnetic and electromagnetic techniques. The physical and chemical characterization of wastes was employed in order to determine the best geophysical methods to locate the useful fractions of wastes in landfill and to establish the occurring treatment cycle for the recovery of useful fractions.A cost–benefit analysis was performed to evaluate the feasibility of the proposed landfill mining operation.     

Industrial processes and waste characterization

Specific industrial processes and its waste characteristics should be known for proper management and control of the wastes produced from industries. Some industrial processes and waste characteristics are introduced to explain how to deal with the wastes for waste characterization. Evaluation methods of biodegradability of industrial wastewater were introduced in order for environmental engineers to be able to decide the proper treatment method of the industrial wastewaters. Industrial processes and characterization discussed in this section might be useful for the selection of suitable methods to prevent pollutant discharge from industrial processes.     

废弃钻井液的治理与利用

石油勘探开发过程中产生的废弃钻井液中含有的地层钻屑、钻井液处理剂等有害物质，若直接排放将对环境与生态造成极大的危害，其治理与利用是当前急需解决的研究课题。从１９９１年开始，在室内反复模拟实验研究的基础上，经过井场应用实践，研制成功了将废弃钻井液转化成水泥浆的固化技术。     

Strategies for sustainable development of industrial park in Ulsan,South Korea—From spontaneous evolution to systematic expansion of industrial symbiosis

The Korea National Cleaner Production Center (KNCPC) affiliated to the Korea Institute of Industrial Technology (KITECH) has started a 15 year, 3-phase EIP master plan with the support of Ministry of Commerce, Industry, and Energy (MOCIE). A total of 6 industrial parks, including industrial parks in Ulsan city, known as the industrial capital of South Korea, are planning projects to find the feasibility of shifting existing industrial parks to eco-industrial parks. The basic survey shows that Ulsan industrial complex has been continuously evolving from conventional industrial complexes to eco-industrial parks by spontaneous industrial symbiosis. This paper describes the Korean national policies and the developmental activities of this vision to drive the global trend of innovation for converting the existing industrial parks to eco-industrial parks through inter-industry waste, energy, and material exchange in Ulsan Industrial complexes. In addition, the primary and supportive components of the Ulsan EIP pilot project, which will be implemented for 5 years is elaborated with its schedules and economic benefits.     

The work of Envirowise in driving forward UK industrial waste reduction

Envirowise — formerly the Environmental Technology Best Practice Programme — is an UK Government Programme designed to help businesses to improve environmental performance and reduce costs. It works closely with industry bodies to prepare a strategic approach to producing and promoting tools that help companies take action to reduce waste at source. By September 2000, the Programme had helped UK companies to save £125 million per year by reducing the use of raw materials and the production of waste. The Programme produces practical advice based on existing practices in industry. As well as producing published information, Envirowise runs a free telephone helpline for UK companies. Envirowise undertakes a considerable amount of marketing to help companies overcome the barriers to action. The Government has set the objectives for the Programme's managing contractors; these are based on the impact of its activities in terms of reduced waste production.     

丝状菌在工业废水处理中的控制与有效利用

任何活性污泥系统中都存在着丝状菌,在丝状菌与菌胶团细菌平衡生长时,不会发生膨胀污泥问题,只有当丝状菌生长超过菌胶团细菌时,就会出现污泥膨胀问题。丝状菌在工业废水中的有效控制与利用尤为重要。     

Critical review of industrial and medical waste practices in Dar es Salaam City

Industrial and medical wastes constitute a larger part on what is known as ‘hazardous wastes’. The production of these wastes is and will continue to be an on going phenomenon as long as human civilization persists. The health impacts of direct and indirect exposure to hazardous wastes include carcinogenic effects, reproductive system damage, respiratory effects, central nervous system effects, and many others. Today, many developed countries have legal provisions with regard to proper management of hazardous wastes. Tanzania, like many developing countries, has little emphasis on the proper handling and disposal of hazardous wastes. There is a serious inadequacy in handling industrial and medical solid wastes in the Dar es Salaam City. Improper waste deposition is increasingly becoming a potential public health risk and an environmental burden. Due to poor control of waste, industrialists and hospital owners are not well checked on how they handle and dispose of the wastes they produce with the result that many hazardous wastes reach the Vingunguti dumpsite without notice. Data on waste generation in Dar es Salaam is also inadequate, making it difficult to plan an efficient solid waste system. Promotion of public awareness, legislation and regulations enforcement and establishment of a proper sanitary landfill are considered to be principal remedial measures to ensure sound environmental maintenance. This paper summarizes the findings of the study on the practices of industrial and medical waste management in Dar es Salaam. The author aims to express the inadequacy in hazardous waste management and suggests possible measures to be applied in order to rectify the situation.     

Industrial estate planning and management in India--an integrated approach towards industrial ecology

Industrial estates (IE) are today perceived as an integral part of development strategies of many countries worldwide. The environmental impacts from a concentration of large number of industries in a small area or unplanned IE, can pose a serious threat to both local and global sustainable development initiatives. The formation of ecologically balanced industrial systems can result in numerous environmental and economic benefits. This paper examines the relevance of industrial symbiosis and carrying capacity concepts and proposes an integrated approach towards IE planning in India based on grouping combinations of industries based on carrying capacity, formation of green industrial townships, development of environmental impact assessment guidelines for IE and implementation of environmental management systems.     

Elemental contaminants in groundwater: A study of trace metals from residential area in the vicinity of an industrial area in Lagos, Nigeria

Groundwater (well water) from a residential area within the vicinity of an industrial estate in Lagos, Nigeria were sampled and analysed by Flame Atomic Absorption Spectroscopy for their heavy metals content. This was with a view of assessing the quality of the water, which was being used for domestic activities, especially, drinking usually without treatment. Total trace metal determination by mineral acid digestion of water samples was applied. This method proved to be better than an extractive concentration technique in the quality assurance protocols with the recovery range being 90.7 ± 0.006–97.6 ± 0.003%. Mean concentration of trace metals in water samples ranged from Fe: 0.05–0.47 mg l⁻¹; Al: 0.1–1.54 mg l⁻¹; Cu: 0.14–1.39 mg l⁻¹; Zn: 0.04–0.43 mg l⁻¹; Cd: trace–0.02 mg l⁻¹; Pb: trace–0.03 mg l⁻¹, Mn: 0.01–0.18 mg l⁻¹ and Ni: 0.02–0.11 mg l⁻¹. Physical parameters of water samples examined were within the drinking water safety limits except for conductivity. Results generally indicate the presence of heavy metal constituents in groundwater samples. Detection of metals such as cadmium and lead which have serious health implications above WHO and USEPA limits in drinking water gives cause for concern.     

Municipal solid waste management in South Africa: from waste to energy recovery through waste-to-energy technologies in Johannesburg

ABSTRACT

“Waste-to-energy” (WTE) technologies have been presented as one of the avenues to improve the management of solid waste whilst promoting clean and healthy urban environments through the recovery of waste and generation of energy. Research suggests that with the right investment in technologies and institutional changes, waste can potentially become a resource that can contribute to the socio-economic development of cities. It is in this context that this paper presents a review of the literature on WTE technologies and their implications on sustainable waste management in urban areas. The paper particularly contributes to our understanding of WTE technologies and its potential on Municipal Solid Waste Management (MSWM) in Johannesburg, South Africa. It is estimated that the city of Johannesburg’s landfills airspace will be completely depleted by year 2023. This projection becomes a motivation for the identification of suitable WTE alternative avenues to manage waste in the city. The paper argues that WTE technologies can contribute significantly to sustainable waste management, economic growth, ecological and environmental well-being.     

Energy recovery from municipal solid waste in Nigeria and its economic and environmental implications

An assessment of potential biomass resources in Nigeria for the production of methane and power generation is presented in this paper. Nigeria, as an underdeveloped and populous country, needs an uninterrupted source of energy. The country's energy problems have crippled large sectors of the economy. The percentage of people connected to the national grid is 40%. These 40% experience electricity supply failure on average 10–12 hours daily. Energy generation from municipal solid waste (MSW) is an effective MSW management strategy. Yearly waste generation has increased from 6,471 gigagrams (Gg) in 1959 to 26,600 Gg in 2015. This amount is projected to reach 36,250 Gg per year by 2030. Methane emission for 2015 was 491 Gg, and it is projected to reach 669 Gg in 2030. These values translate to 3.48 × 10⁹ kilowatt hours (kWh) of electricity for 2015, with a projected 4.74 × 10⁹ kWh by 2030. The revenue to be derived from the electricity that is generated could have been US$365.04 × 10⁶ for 2015, and it is estimated that it will reach US$473.82 × 10⁶ by 2030. It was found that methane emissions from MSW increased with time, and capturing this gas for energy production will lead to a sustainable waste management.     

Solid olive waste in environmental cleanup: oil recovery and carbon production for water purification

A potentially-economic three-fold strategy, to use solid olive wastes in water purification, is presented. Firstly, oil remaining in solid waste (higher than 5% of waste) was recovered by the Soxhlet extraction technique, which can be useful for the soap industry. Secondly, the remaining solid was processed to yield relatively high-surface area active carbon (AC). Thirdly, the resulting carbon was employed to reversibly adsorb chromate ions from water, aiming to establish a water purification process with reusable AC. The technique used here enabled oil recovery together with the production of a clean solid, suitable for making AC. This process also has the advantage of low production cost.     

Impact of food industrial waste on anaerobic co-digestion of sewage sludge and pig manure

The performance of an anaerobic digestion process is much dependent on the type and the composition of the material to be digested. The effects on the degradation process of co-digesting different types of waste were examined in two laboratory-scale studies. In the first investigation, sewage sludge was co-digested with industrial waste from potato processing. The co-digestion resulted in a low buffered system and when the fraction of starch-rich waste was increased, the result was a more sensitive process, with process overload occurring at a lower organic loading rate (OLR). In the second investigation, pig manure, slaughterhouse waste, vegetable waste and various kinds of industrial waste were digested. This resulted in a highly buffered system as the manure contributed to high amounts of ammonia. However, it is important to note that ammonia might be toxic to the micro-organisms. Although the conversion of volatile fatty acids was incomplete the processes worked well with high gas yields, 0.8-1.0 m3 kg(-1) VS.     

Analysis of the role of waste minimisation clubs in reducing industrial water demand in the UK

As a result of the UK Government's waste policy, which increasingly encourages sustainable development, and the realisation that water in the UK cannot be treated as an unlimited resource, there is growing interest in reducing the demand for water by industry. A series of industrial waste minimisation clubs have been set up within the country. This paper identifies the effectiveness of these clubs in reducing the demand for water. An overview of some of the clubs show how there is a major discrepancy between potential and implemented water savings, whilst a more detailed analysis of three specific examples show how water demand and cost to the company can be reduced, with the project paying for itself within around 1 year. It appears that companies are able to reduce water consumption by approximately 30%. If this level of saving was taken up by the entire industrial sector in England and Wales, water consumption could be reduced by approximately 1500 Ml/day. This reduction would be more significant in regions of lower rainfall, for example East Anglia and Southeast England.     

工业园区固体废物生命周期管理边界模型的构建

工业园区内企业众多,副产品和固体废物排放量大,生产过程也复杂,采用生命周期对固体废物进行管理显得也复杂很多。该文从构建工业园区固体废物生命周期管理边界模型出发,并以电子信息产业园区为例,试着将固体废物与不同的企业或生产过程紧密耦合,构建可行的较稳定的生命周期管理边界模型。     

Taking advantage of storm and waste water retention basins as part of water use minimization in industrial sites

A methodology for water use minimization has been developed by the Clean Technology Network of Bahia over a 10 year period in joint cooperative programs with the chemical, petrochemical and copper metallurgy industries located in the largest Industrial Complex in Latin America, in Camaçari, Bahia, Brazil. The methodology comprises a set of tools including reconciled aqueous stream balances, database of aqueous streams; large scale training leading to the identification of water minimization alternatives in the processes, water reuse optimization approaches; geographical information systems as well as, consideration of the region's hydro and hydro-geological characteristics. The results of a study carried out to assess the possibility of using storm and wastewaters for industrial use is presented in this paper. The inorganic system is composed by three water reservoirs (basins) receiving stormwater contaminated with inorganic effluents, and occasionally with organics. These basins have been operated to control water flow inputs according to the capacity of the pumping outlet systems before their discharge to a submarine outfall. A mass balance was performed with historical updated data to assess water availability from the basins based on the daily volume variation and flow rate of inorganic effluent from 2001 to 2007. The study identified the possibility of recovering about 1140 m³/h of the overall 5400 m³/h consumed by the Industrial Complex at the moment. Organizational changes in the present effluent disposal and stormwater harvest systems will be required in order to maximize water recovery for industrial use.     

Assessing determinants of industrial waste reuse: The case of coal ash in the United States

Devising effective strategies to facilitate waste reuse depends on the solid understanding of reuse behaviors. However, previous studies of reuse behavior have been limited in scope, focusing mostly on household recycling behaviors or very limited types of industrial wastes. To gain a better understanding of the business reuse behaviors, this study examined the impact of various factors in technical, economic, regulatory, and behavioral categories in the case of coal ash generated in the United States. The results of fixed effect models for fly ash and bottom ash particularly showed the significance role of the behavioral factor. In both models, a proxy variable, which represents knowledge sharing among the power plants or the utility's decision-making, turned out to be statistically significant and had the largest coefficient estimates among a group of variables. This finding may imply that the characteristics of waste reuse behavior are determined more by business decision-making behaviors than by market or institutional factors. However, the role of the behavioral variable was stronger in the bottom ash models than in the fly ash models. While the reuse of bottom ash was determined primarily by the behavioral variable, fly ash reuse was determined by more diverse factors including economic and regulatory variables. This could be explained by material characteristics in relation to competing resources and the nature of reuse applications.