Preliminary studies of the oxidation of arsenic(III) by potassium ferrate

The Pollutant Standards Index (PSI) was developed in the USA to give the public an overall assessment of the air quality on a regular basis. Currently, the PSI does not include the synergistic effects of the major air pollutants. Synergism applies when the damage caused by two or more pollutants, either to human health or property, is greater than the effect or damage caused by each individual pollutant acting alone. The purpose of this work is to develop a methodology that would take into account the synergistic effects of the priority air pollutants, and therefore give us a better understanding of the severity of the damage caused by these pollutants. The equation suggested is D(P1,P2,P3,P4,P5) = C1^A C2^B C3^C C4^D C5^E. If it is assumed that the weight constants A to E are equal to one (all pollutants contribute equally to the damage), the equation becomes D (P1,P2,P3,P4,P5) = K·C1·C2·C3·C4·C5 where the constant K represents a conversion factor between the PSI scale and the new Synergistic Theory scale. The value of K is to be determined experimentally by finding the threshold value in the synergistic scale and dividing the threshold value of the PSI scale (100) by this number K = 100/SSC1_threshold where SS_threshold is the Synergistic Scale threshold value.     

Federal Regulations for New Source Performance Standards

Section 111 of the Clean Air Act Amendments of 1970 authorizes the U.S. Environmental Protection Agency (EPA) to impose emission standards (NSPS) on those stationary sources that are determined to be significant contributors to air pollution and that consequently endanger the public health or welfare. In five years EPA promulgated 19 final and 1 proposed NSPS for stationary sources. Section 112 of the Act authorizes EPA to promulgate national emission standards for hazardous air pollutants (NESHAPS). EPA promulgated three final and 1 proposed regulation under Section 112. In addition, EPA promulgated NSPS for three "designated" pollutants from specific sources under Section Hid. EPA’s use of Section 111 and 112 authority provides for a quick response emission control program compared to the relatively slow process of establishing additional ambient air quality standards and having the states adopt implementation plans (Section 109). Three court cases, argued in the U.S. Court of Appeals for the District of Columbia, established basic guidelines for future promulgation of NSPS although certain legal actions are still pending. Proposed amendments to the Clean Air Act would further broaden and strengthen EPA’s direct regulatory authority.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO2, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well. Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO2 pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Towards a multidisciplinary and integrated strategy in the assessment of adverse health effects related to air pollution: the case study of Cracow (Poland) and asthma

Complex interaction between anthropogenic activities, air quality and human health in urban areas, such as in Cracow sustains the need for the development of an interdisciplinary and integrated risk-assessment methodology. In such purpose, we propose a pilot study performed on asthmatics and based on a combined use of a biomarker, such as metallothionein 2A (MT-2A) in the characterization of human exposure to one or a mixture of pollutants and of Geographical Information Systems (G.I.S.) which integrates climatic and urban anthropogenic parameters in the assessment of spatio-temporal dispersion of air pollutants. Considering global incidence of air pollution on asthma and on peripheral blood lymphocytes MT-2A expression should provide a complementary information on biological risks linked to urban anthropogenic activities. Such study would help for the establishment of a sustainable development in urban areas that can maintain the integrity of air quality and preserve human health.     

A real-time monitoring and assessment method for calculation of total amounts of indoor air pollutants emitted in subway stations

Subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, in this study, a new cumulative calculation method for the estimation of total amounts of indoor air pollutants emitted inside the subway station is proposed by taking cumulative amounts of indoor air pollutants based on integration concept. Minimum concentration of individual air pollutants which naturally exist in indoor space is referred as base concentration of air pollutants and can be found from the data collected. After subtracting the value of base concentration from data point of each data set of indoor air pollutant, the primary quantity of emitted air pollutant is calculated. After integration is carried out with these values, adding the base concentration to the integration quantity gives the total amount of indoor air pollutant emitted. Moreover, the values of new index for cumulative indoor air quality obtained for 1 day are calculated using the values of cumulative air quality index (CAI). Cumulative comprehensive indoor air quality index (CCIAI) is also proposed to compare the values of cumulative concentrations of indoor air pollutants. From the results, it is clear that the cumulative assessment approach of indoor air quality (IAQ) is useful for monitoring the values of total amounts of indoor air pollutants emitted, in case of exposure to indoor air pollutants for a long time. Also, the values of CCIAI are influenced more by the values of concentration of NO₂, which is released due to the use of air conditioners and combustion of the fuel. The results obtained in this study confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.

Implications: Nowadays, subway systems are considered as main public transportation facility in developed countries. Time spent by people in indoors, such as underground spaces, subway stations, and indoor buildings, has gradually increased in the recent past. Especially, operators or old persons who stay in the indoor environments more than 15 hr per day usually influenced a greater extent by indoor air pollutants. Hence, regulations on indoor air pollutants are needed to ensure good health of people. Therefore, this paper presents a new methodology for monitoring and assessing total amounts of indoor air pollutants emitted inside underground spaces and subway stations. A new methodology for the calculation of cumulative amounts of indoor air pollutants based on integration concept is proposed. The results suggest that the cumulative assessment approach of IAQ is useful for monitoring the values of total amounts of indoor air pollutants, if indoor air pollutants accumulated for a long time, especially NO₂ pollutants. The results obtained here confirm that the proposed method can be applied to monitor total amounts of indoor air pollutants emitted, inside apartments and hospitals as well.     

Air quality management in Portugal: example of needs and available tools

The Framework Directive (FWD) and the proposed Daughter Directives are the newest legislative instruments concerning a new political strategy and air quality management approach for Europe. Additionally, the member countries of the United Nations Economic Commission for Europe have included the concepts of critical load and level for planning air pollution abatement strategies and as a base of international agreements concerning limitation of the emissions of air pollutants. These concepts imply an accurate knowledge about pollutants deposition fluxes. The paper describes the main needs and the tools available to define a strategy of air quality management in Portugal. Two study cases are presented: (1) extensive monitoring plan to assess the impact of an urban incinerator plant; and (2) contribution to a methodology to estimate critical levels for a coastal region in Portugal. These different approaches allowed illustrating the complexity of the implementation of an air pollution management strategy.     

Impact of three interactive Texas state regulatory programs to decrease ambient air toxic levels

The Federal Clean Air Act (FCAA) framework envisions a federal-state partnership whereby the development of regulations may be at the federal level or state level with federal oversight. The U.S. Environmental Protection Agency (EPA) establishes National Ambient Air Quality Standards to describe “safe” ambient levels of criteria pollutants. For air toxics, the EPA establishes control technology standards for the 187 listed hazardous air pollutants (HAPs) but does not establish ambient standards for HAPs or other air toxics. Thus, states must ensure that ambient concentrations are not at harmful levels. The Texas Clean Air Act authorizes the Texas Commission on Environmental Quality (TCEQ), the Texas state environmental agency, to control air pollution and protect public health and welfare. The TCEQ employs three interactive programs to ensure that concentrations of air toxics do not exceed levels of potential health concern (LOCs): air permitting, ambient air monitoring, and the Air Pollutant Watch List (APWL). Comprehensive air permit reviews involve the application of best available control technology for new and modified equipment and ensure that permits protect public health and welfare. Protectiveness may be demonstrated by a number of means, including a demonstration that the predicted ground-level concentrations for the permitted emissions, evaluated on a case-by-case and chemical-by-chemical basis, do not cause or contribute to a LOC. The TCEQ's ambient air monitoring program is extensive and provides data to help assess the potential for adverse effects from all operational equipment in an area. If air toxics are persistently monitored at a LOC, an APWL area is established. The purpose of the APWL is to reduce ambient air toxic concentrations below LOCs by focusing TCEQ resources and heightening awareness. This paper will discuss examples of decreases in air toxic levels in Houston and Corpus Christi, Texas, resulting from the interactive nature of these programs.

Implications: Texas recognized through the collection of ambient monitoring data that additional measures beyond federal regulations must be taken to ensure that public health is protected. Texas integrates comprehensive air permitting, extensive ambient air monitoring, and the Air Pollutant Watch List (APWL) to protect the public from hazardous air toxics. Texas issues air permits that are protective of public health and also assesses ambient air to verify that concentrations remain below levels of concern in heavily industrialized areas. Texas developed the APWL to improve air quality in those areas where monitoring indicates a potential concern. This paper illustrates how Texas engaged its three interactive programs to successfully address elevated air toxic levels in Houston and Corpus Christi.     

Review of Singapore's air quality and greenhouse gas emissions: current situation and opportunities

Singapore has many environmental accomplishments to its credit. Accessible data on air quality indicates that all criteria pollutants satisfy both U.S. Environmental Protection Agency (EPA) and World Health Organization (WHO) air quality standards and guidelines, respectively. The exception is PM2.5 (particles with an aerodynamic diameter < or = 2.5 microm), which is not currently considered a criteria pollutant in Singapore but may potentially be the major local air pollution problem and cause for health concern. Levels of other airborne pollutants as well as their physical and chemical processes associated with local formation, transformation, dispersion, and deposition are not known. According to available emission inventories, Singapore contribution to the total atmospheric pollution and carbon budget at the regional and global scales is small. Emissions per unit gross domestic product (GDP) are low compared with other countries, although Singapore's per-capita GDP and per-capita emissions are among the highest in the world. Some information is available on health effects, but the impacts on the ecosystem and the complex interactions of air pollution and climate change at a regional level are also unknown. This article reviews existing available information on atmospheric pollution and greenhouse gas emissions and proposes a multipollutant approach to greenhouse gas mitigation and local air quality. Singapore, by reducing its per-capita emissions, increasing the availability of information (e.g., through regularly publishing hourly and/or daily PM2.5 concentrations) and developing a research agenda in this area, would likely be seen to be a model of a high-density, livable, and sustainable city in Southeast Asia and other tropical regions worldwide.     

Application of Gas-Aerosol Adsorption Data to the Selection of Air Quality Standards

A quantitative approach is presented for selecting air quality standards which take into account pollutant gas-aerosol synergistic effects. These synergistic health effects have been postulated to be due to the adsorption or absorption of the pollutant gas by the aerosol particles. The approach presented in this paper assumes that the synergistic toxic agent is the adsorbed pollutant gas. Therefore, limiting the concentration of the adsorbed pollutant gas limits the magnitude of the synergistic effects. The concentration of the adsorbed pollutant gas is related to the concentrations of the gaseous phase pollutant gas and the atmospheric aerosol using the Langmuir adsorption isotherm. An example is presented of the selection of air quality standards for sulfur dioxide and the atmospheric aerosol using concentration data for these two pollutants along with health effect data.     

Assessment of the emissions and air quality impacts of biomass and biogas use in California

It is estimated that there is sufficient in-state “technically” recoverable biomass to support nearly 4000 MW of bioelectricity generation capacity. This study assesses the emissions of greenhouse gases and air pollutants and resulting air quality impacts of new and existing bioenergy capacity throughout the state of California, focusing on feedstocks and advanced technologies utilizing biomass resources predominant in each region. The options for bioresources include the production of bioelectricity and renewable natural gas (NG). Emissions of criteria pollutants and greenhouse gases are quantified for a set of scenarios that span the emission factors for power generation and the use of renewable natural gas for vehicle fueling. Emissions are input to the Community Multiscale Air Quality (CMAQ) model to predict regional and statewide temporal air quality impacts from the biopower scenarios. With current technology and at the emission levels of current installations, maximum bioelectricity production could increase nitrogen oxide (NO_x) emissions by 10% in 2020, which would cause increases in ozone and particulate matter concentrations in large areas of California. Technology upgrades would achieve the lowest criteria pollutant emissions. Conversion of biomass to compressed NG (CNG) for vehicles would achieve comparable emission reductions of criteria pollutants and minimize emissions of greenhouse gases (GHG). Air quality modeling of biomass scenarios suggest that applying technological changes and emission controls would minimize the air quality impacts of bioelectricity generation. And a shift from bioelectricity production to CNG production for vehicles would reduce air quality impacts further. From a co-benefits standpoint, CNG production for vehicles appears to provide the best benefits in terms of GHG emissions and air quality.

Implications:?This investigation provides a consistent analysis of air quality impacts and greenhouse gas emissions for scenarios examining increased biomass use. Further work involving economic assessment, seasonal or annual emissions and air quality modeling, and potential exposure analysis would help inform policy makers and industry with respect to further development and direction of biomass policy and bioenergy technology alternatives needed to meet energy and environmental goals in California.     

Generalized Rollback Modeling for Urban Air Pollution Control

A general formula is derived that can be used to calculate the reductions in emissions of inert pollutants required to achieve National Ambient Air Quality Standards (NAAQS) and to predict future urban atmospheric concentrations. The derivation incorporates the main features of atmospheric diffusion modeling and takes account of all categories of sources and their spatial distribution. In our previous paper, carbon monoxide (CO) emissions from light duty vehicles were considered separately with the approximation that emissions from other sources of CO would grow and be controlled proportionately to that of light duty vehicles.

The new general formula is applied to Phoenix-Tucson using EPA data. It Is found that Phoenix-Tucson will meet the NAAQS for CO by 1985 if a 12 g/mi light duty vehicle emission standard is adopted. The EPA, using the same data in a modified rollback analysis, had predicted that Phoenix-Tucson, as well as a number of other localities, would not achieve the NAAQS even if the 3.4 g/mi statutory standard went into effect on schedule.

The underlying reasons for these very different predictions can be readily identified by means of the general formula. It is essential that the data and parameters used in these predictions be internally consistent. It is also noted that the current Federal Test Procedure (CVS-CH) for vehicle emissions gives data inconsistent with that needed to predict CO air quality with a correct methodology.     

A critical assessment of shrinkage-based regression approaches for estimating the adverse health effects of multiple air pollutants

Most investigations of the adverse health effects of multiple air pollutants analyse the time series involved by simultaneously entering the multiple pollutants into a Poisson log-linear model. Concerns have been raised about this type of analysis, and it has been stated that new methodology or models should be developed for investigating the adverse health effects of multiple air pollutants. In this paper, we introduce the use of the lasso for this purpose and compare its statistical properties to those of ridge regression and the Poisson log-linear model. Ridge regression has been used in time series analyses on the adverse health effects of multiple air pollutants but its properties for this purpose have not been investigated. A series of simulation studies was used to compare the performance of the lasso, ridge regression, and the Poisson log-linear model. In these simulations, realistic mortality time series were generated with known air pollution mortality effects permitting the performance of the three models to be compared. Both the lasso and ridge regression produced more accurate estimates of the adverse health effects of the multiple air pollutants than those produced using the Poisson log-linear model. This increase in accuracy came at the expense of increased bias. Ridge regression produced more accurate estimates than the lasso, but the lasso produced more interpretable models. The lasso and ridge regression offer a flexible way of obtaining more accurate estimation of pollutant effects than that provided by the standard Poisson log-linear model.     

Traffic and Meteorological Impacts on Near-Road Air Quality: Summary of Methods and Trends from the Raleigh Near-Road Study

Abstract

A growing number of epidemiological studies conducted worldwide suggest an increase in the occurrence of adverse health effects in populations living, working, or going to school near major roadways. A study was designed to assess traffic emissions impacts on air quality and particle toxicity near a heavily traveled highway. In an attempt to describe the complex mixture of pollutants and atmospheric transport mechanisms affecting pollutant dispersion in this near-highway environment, several real-time and time-integrated sampling devices measured air quality concentrations at multiple distances and heights from the road. Pollutants analyzed included U.S. Environmental Protection Agency (EPA)-regulated gases, particulate matter (coarse, fine, and ultrafine), and air toxics. Pollutant measurements were synchronized with real-time traffic and meteorological monitoring devices to provide continuous and integrated assessments of the variation of near-road air pollutant concentrations and particle toxicity with changing traffic and environmental conditions, as well as distance from the road. Measurement results demonstrated the temporal and spatial impact of traffic emissions on near-road air quality. The distribution of mobile source emitted gas and particulate pollutants under all wind and traffic conditions indicated a higher proportion of elevated concentrations near the road, suggesting elevated exposures for populations spending significant amounts of time in this microenvironment. Diurnal variations in pollutant concentrations also demonstrated the impact of traffic activity and meteorology on near-road air quality. Time-resolved measurements of multiple pollutants demonstrated that traffic emissions produced a complex mixture of criteria and air toxic pollutants in this microenvironment. These results provide a foundation for future assessments of these data to identify the relationship of traffic activity and meteorology on air quality concentrations and population exposures.     

Traffic and meteorological impacts on near-road air quality: summary of methods and trends from the Raleigh Near-Road Study

A growing number of epidemiological studies conducted worldwide suggest an increase in the occurrence of adverse health effects in populations living, working, or going to school near major roadways. A study was designed to assess traffic emissions impacts on air quality and particle toxicity near a heavily traveled highway. In an attempt to describe the complex mixture of pollutants and atmospheric transport mechanisms affecting pollutant dispersion in this near-highway environment, several real-time and time-integrated sampling devices measured air quality concentrations at multiple distances and heights from the road. Pollutants analyzed included U.S. Environmental Protection Agency (EPA)-regulated gases, particulate matter (coarse, fine, and ultrafine), and air toxics. Pollutant measurements were synchronized with real-time traffic and meteorological monitoring devices to provide continuous and integrated assessments of the variation of near-road air pollutant concentrations and particle toxicity with changing traffic and environmental conditions, as well as distance from the road. Measurement results demonstrated the temporal and spatial impact of traffic emissions on near-road air quality. The distribution of mobile source emitted gas and particulate pollutants under all wind and traffic conditions indicated a higher proportion of elevated concentrations near the road, suggesting elevated exposures for populations spending significant amounts of time in this microenvironment. Diurnal variations in pollutant concentrations also demonstrated the impact of traffic activity and meteorology on near-road air quality. Time-resolved measurements of multiple pollutants demonstrated that traffic emissions produced a complex mixture of criteria and air toxic pollutants in this microenvironment. These results provide a foundation for future assessments of these data to identify the relationship of traffic activity and meteorology on air quality concentrations and population exposures.     

Evaluation of human exposure to ambient PM10 in the metropolitan area of Mexico City using a GIS-based methodology.

The main goal of this study was to evaluate the magnitude of outdoor exposure to fine particulate matter (PM10) potentially experienced by the population of metropolitan Mexico City. With the use of a geographic information system (GIS), spatially resolved PM10 distributions were generated and linked to the local population. The PM10 concentration exceeded the 24-hr air quality standard of 150 microg/m3 on 16% of the days, and the annual air quality standard of 50 microg/m3 was exceeded by almost twice its value in some places. The basic methodology described in this paper integrates spatial demographic and air quality databases, allowing the evaluation of various air pollution reduction scenarios. Achieving the annual air quality standard would represent a reduction in the annual arithmetic average concentration of 14 microg/m3 for the typical inhabitant. Human exposure to particulate matter (PM) has been associated with mortality and morbidity in Mexico City; reducing the concentration levels of this pollutant would represent a reduction in mortality and morbidity and the associated cost of such impacts. This methodology is critical to assessing the potential benefits of the current initiative to improve air quality implemented by the Environmental Metropolitan Commission of Mexico City.     

A Regulatory Analysis

The information presented in this paper is directed to those individuals interested in future air quality control programs aimed at areas that are attaining one or more air quality ambient standards. Section 116 of the Clean Air Act, as amended, requires the Environmental Protection Agency to promulgate regulations for the prevention of significant deterioration (PSD) of air quality in order to protect the nation's clean air resources from hydrocarbons, carbon monoxide, ozone, nitrogen oxides, and lead (Set II pollutants). This program will affect industry siting in many areas of the country, particularly in the rural, undeveloped areas. Among the many alternatives currently being considered by EPA to meet the PSD Set II goals are emission management systems, marketable emission permits, air quality increments, emission fees, and control of transportation related sources. The final regulation may be a combination of several options or may present several alternatives from which a State would choose its specific program.     

Air pollution and health studies in China--policy implications

During the rapid economic development in China, ambient air pollutants in major cities, including PM10 (particulate matter with aerodynamic diameter < or =10 microm) and SO2 have been reduced due to various measures taken to reduce or control sources of emissions, whereas NO2 is stable or slightly increased. However, air pollution levels in China are still at the higher end of the world level. Less information is available regarding changes in national levels of other pollutants such as PM2.5 and ozone. The Chinese Ministry of Environmental Protection (MOEP) set an index for "controlling/reducing total SO2 emissions" to evaluate the efficacy of air pollution control strategy in the country. Total SO2 emissions declined for the first time in 2007. Chinese epidemiologic studies evidenced adverse health effects of ambient air pollution similar to those reported from developed countries, though risk estimates on mortality/morbidity per unit increase of air pollutant are somewhat smaller than those reported in developed countries. Disease burden on health attributable to air pollution is relatively greater in China because of higher pollution levels. Improving ambient air quality has substantial and measurable public health benefits in China. It is recommended that the current Chinese air quality standards be updated/revised and the target for "controlling/reducing total SO2 emissions" be maintained and another target for "reducing total NO2 emissions" be added in view of rapid increase in motor vehicles. Continuous and persistent efforts should be taken to improve ambient air quality.     

Potential assessment of the "support vector machine" method in forecasting ambient air pollutant trends

Monitoring and forecasting of air quality parameters are popular and important topics of atmospheric and environmental research today due to the health impact caused by exposing to air pollutants existing in urban air. The accurate models for air pollutant prediction are needed because such models would allow forecasting and diagnosing potential compliance or non-compliance in both short- and long-term aspects. Artificial neural networks (ANN) are regarded as reliable and cost-effective method to achieve such tasks and have produced some promising results to date. Although ANN has addressed more attentions to environmental researchers, its inherent drawbacks, e.g., local minima, over-fitting training, poor generalization performance, determination of the appropriate network architecture, etc., impede the practical application of ANN. Support vector machine (SVM), a novel type of learning machine based on statistical learning theory, can be used for regression and time series prediction and have been reported to perform well by some promising results. The work presented in this paper aims to examine the feasibility of applying SVM to predict air pollutant levels in advancing time series based on the monitored air pollutant database in Hong Kong downtown area. At the same time, the functional characteristics of SVM are investigated in the study. The experimental comparisons between the SVM model and the classical radial basis function (RBF) network demonstrate that the SVM is superior to the conventional RBF network in predicting air quality parameters with different time series and of better generalization performance than the RBF model.