共查询到20条相似文献,搜索用时 281 毫秒
1.
To evaluate whether poly-beta-hydroxyalkanoate (PHA) production and wastewater treatment could be combined in a single biological process, a bench-scale sequencing batch reactor was operated with sequential anaerobic and aerobic stages and removal of excess sludge at different stages of treatment. The reactor treated synthetic wastewater with a high organic and low nutrient content, simulating industrial wastewater. Chemical oxygen demand removal efficiency was more than 90% in all cases. Poly-beta-hydroxyalkanoate accumulation was significant, although it did not appear to be induced by oxygen limitations during the anaerobic stage. Sphaerotilus natans was apparently the dominant PHA-accumulating organism at the end of each reactor run and corresponded to a PHA accumulation of 16 to 20% of the total dry cell mass. Before S. natans dominated the reactors, PHA accumulation was approximately 17% when biomass was removed at the end of the aerobic stage and 6.6% when sludge removal also occurred during the anaerobic stage. 相似文献
2.
3.
This work establishes methods of reducing the amount of methane produced from the anaerobic treatment of piggery wastewater by either reducing the storage time before solid/liquid separation or inhibiting the activity of methanogens in anaerobic wastewater treatment system. Experimental results showed these two methods can be adopted effectively to reduce methane production resulting from anaerobic piggery wastewater treatment. First, the wastewater must be processed using solid/liquid separation immediately after washing pig houses. This process can reduce by 62% the biogas production and indirectly decrease the methane production from the anaerobic wastewater treatment reactor. Second, adding 10 mg L(-1) bromochloromethane (BCM) daily into the anaerobic wastewater treatment reactor can significantly reduce the amount of biogas and methane produced during the anaerobic fermentation process. Furthermore, biogas production can be completely inhibited after 4 days. Adding BCM (< or =10 mg L(-1)) to wastewater only slightly affected the efficiency of the anaerobic wastewater treatment process. Results in this study can provide the basis for further research on reduction of the amount of methane produced from anaerobic wastewater treatments. 相似文献
4.
《Journal of environmental science and health. Part. B》2013,48(5-6):889-902
Abstract This work establishes methods of reducing the amount of methane produced from the anaerobic treatment of piggery wastewater by either reducing the storage time before solid/liquid separation or inhibiting the activity of methanogens in anaerobic wastewater treatment system. Experimental results showed these two methods can be adopted effectively to reduce methane production resulting from anaerobic piggery wastewater treatment. First, the wastewater must be processed using solid/liquid separation immediately after washing pig houses. This process can reduce by 62% the biogas production and indirectly decrease the methane production from the anaerobic wastewater treatment reactor. Second, adding 10 mg L?1 bromochloromethane (BCM) daily into the anaerobic wastewater treatment reactor can significantly reduce the amount of biogas and methane produced during the anaerobic fermentation process. Furthermore, biogas production can be completely inhibited after 4 days. Adding BCM (≤10 mg L?1) to wastewater only slightly affected the efficiency of the anaerobic wastewater treatment process. Results in this study can provide the basis for further research on reduction of the amount of methane produced from anaerobic wastewater treatments. 相似文献
5.
Heat transfer analysis of cylindrical anaerobic reactors with different sizes: a heat transfer model
Jiawei Liu Xingqiu Zhou Jiangdong Wu Wen Gao Xu Qian 《Environmental science and pollution research international》2017,24(30):23508-23517
The temperature is the essential factor that influences the efficiency of anaerobic reactors. During the operation of the anaerobic reactor, the fluctuations of ambient temperature can cause a change in the internal temperature of the reactor. Therefore, insulation and heating measures are often used to maintain anaerobic reactor’s internal temperature. In this paper, a simplified heat transfer model was developed to study heat transfer between cylindrical anaerobic reactors and their surroundings. Three cylindrical reactors of different sizes were studied, and the internal relations between ambient temperature, thickness of insulation, and temperature fluctuations of the reactors were obtained at different reactor sizes. The model was calibrated by a sensitivity analysis, and the calibrated model was well able to predict reactor temperature. The Nash-Sutcliffe model efficiency coefficient was used to assess the predictive power of heat transfer models. The Nash coefficients of the three reactors were 0.76, 0.60, and 0.45, respectively. The model can provide reference for the thermal insulation design of cylindrical anaerobic reactors. 相似文献
6.
7.
研究了序批式水解酸化 厌氧 好氧生物处理工艺对NF合成制药废水的处理。由于NF制药废水中含有大量有毒有机化合物 ,在生物处理过程中这些有毒物质会抑制活性污泥的活性 ,因此需经过适当稀释原水以达到处理单元可接受的毒性范围。采用BODTrack快速测定了不同原水稀释条件下活性污泥呼吸曲线第一段斜率的变化 ,结果表明 ,当原水稀释 2 0倍以上后 ,对活性污泥的活性没有明显的抑制。通过批量实验 ,优化了工艺的运行条件 ,并进行了小试的连续运行。采用本工艺可以达到NF制药废水COD的稳定高效去除 ,结果显示 ,COD的去除率可达 76 %。 相似文献
8.
9.
Peter C Pollard 《Water environment research》2006,78(2):189-195
Reliable design and operation of biological wastewater treatment systems demand robust models of biological degradation processes. However, methods to directly measure key bacterial growth kinetics have not been readily available. Those methods that are available rely on the classic measurement of aerobic respiration using oxygen uptake take rates. This paper shows how the thymidine assay can be used as a rapid and direct measurement of bacterial specific growth rates (mu) in situ for an anaerobic treatment process, independent of aerobic respiration. A filtration-based assay is applied and evaluated a dispersed-phase high-rate anaerobic treatment process, with results obtained in less than an hour. The chemical oxygen demand (COD) biomass in the reactor was 0.52 kg COD m(-3) and the specific growth rate of these anaerobic bacteria was 0.8 +/- 0.2 d(-1). It took the bacterial populations 21.6 hours to double. This is an important advancement from existing methods that use aerobic respiration as a pseudo measurement of bacterial specific growth rates. The method allows rapid and direct measures of microbial growth rates for anaerobic treatment processes. 相似文献
10.
11.
Madhubabu S Kumar M Philip L Venkobachar C 《Journal of environmental science and health. Part. B》2007,42(2):189-199
In the present study, fate of carbofuran in anaerobic environments and the adverse effects of carbofuran on conventional anaerobic systems were evaluated. Carbofuran degradation studies were carried out in batch reactors with varying carbofuran concentrations of 0 to 270.73 mg/L corresponding to a sludge-loading rate (SLR) of 2.12 x 10(-6) to 3.83 x 10(-3) g of carbofuran/g of volatile suspended solids (VSS)/d. Carbofuran concentration was reduced to undetectable levels at the end of 8 and 13 days in the batch reactors operated with a SLR of 2.12 x 10(-6) and 3.33 x 10(-5) g of carbofuran/g of VSS/d, respectively. Performances of two anaerobic reactors i.e. upflow anaerobic sludge blanket (UASB) and modified UASB (with tube settlers) were evaluated in the presence and absence of carbofuran using synthetic wastewater. In the absence of carbofuran, the soluble chemical oxygen demand (COD) removal efficiency in the conventional UASB reactor at 8 h and 6 h hydraulic retention time (HRT) was nearly 88% and 76%, respectively, whereas in modified UASB reactor it was increased to 90% at 8 h HRT and 78% at 6 h HRT. When 28 mg/L (SLR of 1.19 x 10(-2) g of carbofuran/g of VSS/d) of carbofuran was introduced in the reactors, the COD removal efficiency was reduced to 41% and 44% in conventional and modified UASB reactors respectively. However, the reactor could maintain around 80% COD removal efficiency at a carbofuran concentration of 7.84 mg/L (SLR of 3.64 x 10(-3) g of carbofuran/g of VSS/d). The reactor efficiency was also measured in terms of specific acetoclastic methanogenic activity (SMA). The toxic effect of carbofuran was reversible to a certain extent. Carbofuran removal efficiency in the conventional UASB reactor at carbofuran concentrations of 7, 13 and 28 mg/L were 40 +/- 3%, 27 +/- 3%, and 11 +/- 3%, respectively. In modified UASB reactor, carbofuran removal efficiency was almost uniform at 7 and 13 mg/L but it was reduced nearly by 56% at 28 mg/L. The major metabolite of carbofuran i.e. 3-keto carbofuran was found in all the reactors. 相似文献
12.
13.
14.
研究有机碳源对SBBR厌氧氨氧化菌群等微生物的影响。采用16S rDNA序列与PCR-DGGE分析技术相结合的方法,对稳定运行的反应器内的活性污泥和生物膜样品,进行细菌多样性图谱分析,同时采用巢式PCR-DGGE技术对浮霉状菌属(Planctomycetes)细菌进行分析。结果表明,在有机碳源反应系统细菌条带数和多样性指数均高于无机系统,与活性污泥相比,生物膜表尤为明显。当进水不含有机碳源时,氨氧化细菌(ammonia oxidizing bacteria,AOB),厌氧氨氧化菌(anaerobic ammonia oxidizing bacteria,ANAMMOX)为优势功能菌;当进水含有机碳源时,系统中存在的AOB以亚硝化单胞菌(Nitrosomonas sp.)为优势菌群,同时存在反硝化菌,如索氏菌(Thauera sp.)以及厌氧氨氧化菌,它们共同作用完成N的去除。此外,与无机碳源系统相比,有机碳源的存在,有利于浮霉状菌的积累,但压缩了ANAMMOX的生存空间。本研究可为厌氧氨氧化工艺处理低C/N比有机废水提供了理论依据。 相似文献
15.
16.
水解酸化-SBR法在化工废水处理中的应用 总被引:1,自引:0,他引:1
针对高浓度、毒性大、难生物降解的工业有机废水,探索了水解酸化-SBR工艺的最佳运行参数和配套工艺措施,为工程设计提供依据.其中水解酸化采用ABR反应器,研究了温度、停留时间、毒性物质等因素对处理效果的影响,结果表明,该工艺处理三吉利香兰素化工废水取得了较好的处理效果. 相似文献
17.
分别以厌氧污泥、脱氮硫杆菌菌悬液和厌氧污泥并添加脱氮硫杆菌菌悬液为接种物,以硫化物和硝酸盐为进水基质,考察不同接种物条件下,各反应器的硫化物氧化特性、反硝化特性、生化反应机理及微生物特性。结果表明,在无菌条件下,硫化物不能被硝酸盐化学氧化。接种脱氮硫杆菌菌悬液的2#反应器的硫氧化速率为1.98 g S/(m3.h),停留24 h硫化物的去除率高达97%,脱硫能力最强,该接种条件下以硝酸盐氧化硫化物为主反应,优势菌为杆菌,进水的NO3--N/S应控制在0.4以下,可以实现高效生物脱硫。接种厌氧污泥的1#和3#反应器的脱氮效果比2#反应器好,停留时间为24 h时,硝酸盐的平均去除率为96%。单独接种厌氧污泥的1#反应器的硫氧化速率为1.78 g S/(m3.h),其优势菌为球菌,该接种条件下以硝酸盐氧化硫化物和硝酸盐氧化单质硫为主反应,进水的NO3--N/S应控制在0.8左右。以厌氧污泥联合脱氮硫杆菌为接种物时,硫氧化速率为1.71 g S/(m3.h),反应器以硝酸盐氧化硫化物、硝酸盐氧化单质硫以及异养反硝化为主反应,驯化后优势菌为球形、卵圆形和短杆状,应控制进水NO3--N/S为1.2,可以实现同步脱硫反硝化,该工艺既可以用于含硫废水的处理,也可以用于C/N低的硝酸盐废水的处理。 相似文献
18.
拼装式反应器是一种采用栓接方式将经过防腐处理的钢板现场拼接的新型的污水处理设备.反应器的设计由反应器罐体结构设计、基础设计及配套产品的嵌接设计3个方面构成;拼装式反应器与成熟的污水处理技术(如UASB、水解工艺、SBR、BAF等)的结合提高了污水处理设备的技术含量.拼装式反应器已在猪场废水、食品加工废水、制药废水、啤酒废水及城市污水等废水处理工程中得到了成功应用. 相似文献
19.
光合细菌强化二级流化床工艺处理焦化废水的研究 总被引:1,自引:0,他引:1
采用厌氧酸化加二级流化床组合工艺处理焦化废水。一级反应器内光合细菌与兼性厌氧菌处于共生状态,二级反应器内光合细菌与亚硝酸细菌处于共生状态。一级反应器内光合细菌有充分的小分子有机酸可降解并形成二次酸化,在二级反应器内完成进一步降解。结合反应条件:温度,pH,DO和基质浓度等,将二级反应器内硝化反应控制在亚硝化阶段,有效地保证了废水中碳源的利用。稳定运行了60 d,结果显示,出水COD和NH3-N浓度分别为105~135 mg/L和14~20 mg/L,去除率分别稳定在90.3%~92.5%和92%~95%。TN去除率稳定在83%~86%。酚、氰化物和BOD5的去除率均在95%以上。 相似文献
20.
An investigation of biodegradation of chlorinated phenol in an anaerobic/aerobic bioprocess environment was made. The reactor configuration used consisted of linked anaerobic and aerobic reactors, which served as a model for a proposed bioremediation strategy. The proposed strategy was studied in two reactors before linkage. In the anaerobic compartment, the transformation of the model contaminant, 2,4,6-trichlorophenol (2,4,6-TCP), to lesser-chlorinated metabolites was shown to occur during reductive dechlorination under sulfate-reducing conditions. The consortium was also shown to desorb and mobilize 2,4,6-TCP in soils. This was followed, in the aerobic compartment, by biodegradation of the pollutant and metabolites, 2,4-dichlorophenol, 4-chlorophenol, and phenol, by immobilized white-rot fungi. The integrated process achieved elimination of the compound by more than 99% through fungal degradation of metabolites produced in the dechlorination stage. pH correction to the anaerobic reactor was found to be necessary because acidic effluent from the fungal reactor inhibited sulfate reduction and dechlorination. 相似文献