Response of stable carbon isotope in epilithic mosses to atmospheric nitrogen deposition

Epilithic mosses are characterized by insulation from substratum N and hence meet their N demand only by deposited N. This study investigated tissue C, total Chl and δ¹³C of epilithic mosses along 2 transects across Guiyang urban (SW China), aiming at testing their responses to N deposition. Tissue C and total Chl decreased from the urban to rural, but δ¹³C_moss became less negative. With measurements of atmospheric CO₂ and δ¹³CO₂, elevated N deposition was inferred as a primary factor for changes in moss C and isotopic signatures. Correlations between total Chl, tissue C and N signals indicated a nutritional effect on C fixation of epilithic mosses, but the response of δ¹³C_moss to N deposition could not be clearly differentiated from effects of other factors. Collective evidences suggest that C signals of epilithic mosses are useful proxies for N deposition but further works on physiological mechanisms are still needed.     

Internationally harmonized approach to biomonitoring trace element atmospheric deposition

The International Atomic Energy Agency (IAEA) has been systematically supporting work on biomonitoring air pollution using plants since 1997. Such studies are presently being supported by the IAEA in 14 countries within a co-ordinated research project. The main emphasis of this project is on (1) identification of suitable biomonitors of atmospheric pollution for local and/or regional application, and (2) their validation for general environmental monitoring, whenever possible. Although the participants are using different plants as biomonitors in their research in geographically and climatically diverse parts of the world, they are harmonising sampling approaches and analytical procedures. In this paper, an overview of these activities is given, along with the details, where possible. In all of these activities, proficiency testing and analytical quality assurance are important issues, which merit special attention. Within the scope of an intercomparison exercise, two lichen materials were distributed among the participating laboratories and a proficiency test was organised. The results obtained proved satisfactory performance for most participating laboratories.     

Coarse atmospheric aerosol: size distributions of trace elements

A sampler, employing nine single stage impactors placed in parallel within a portable wind tunnel, has been used to determine the metal content of coarse atmospheric aerosol. The wind tunnel maintains a constant flow environment for the collectors housed inside it, so that representative sampling conditions are achieved compared to the varied ambient wind conditions. At a flow rate of 8 m s⁻¹ the 50% cut-off diameters of the impactors ranged from 7.8 to 38.8 μm. Measurements were conducted at a rural and urban site near Colchester in south east England. The samplers were analysed by PIXE for P, K, Ca, Fe, Ti, Mn, Cu, V, Co, Cr, Br, Zn, Ni, Sc and Pb. It is found that the sampler can be employed to quantitatively characterise the elemental mass size distribution for aerosol larger than 10 μm. The results indicate that a small fraction of the above earth and trace elements’ metal mass is present in particles greater than 10 μm. This fraction for earth metals (Ca, K, Ti) is comparatively greater in the rural site than the urban site, while for trace metals (Mn, V, Cu, Cr) this fraction constitutes a more significant part of the coarse mass at the urban site. Trace element concentrations were of a similar order of magnitude to earlier literature reports. Although the number of measurements was limited it can be concluded that the size distributions obtained were characteristic of an unpolluted area.     

Characteristics and impacts of trace elements in atmospheric deposition at a high-elevation site,southern China

To investigate the regional background trace element (TE) level in atmospheric deposition (dry and wet), TEs (Fe, Al, V, Cr, Mn, Ni, Cu, Zn, As, Se, Mo, Cd, Ba, and Pb) in 52 rainwater samples and 73 total suspended particles (TSP) samples collected in Mt. Lushan, Southern China, were analyzed using inductively coupled plasma-mass spectrometry (ICP-MS). The results showed that TEs in wet and dry deposition of the target area were significantly elevated compared within and outside China and the volume weight mean pH of rainwater was 4.43. The relative contributions of wet and dry depositions of TEs vary significantly among elements. The wet deposition fluxes of V, As, Cr, Se, Zn, and Cd exceeded considerably their dry deposition fluxes while dry deposition dominated the removal of pollution elements such as Mo, Cu, Ni, Mn, and Al. The summed dry deposition flux was four times higher than the summed wet deposition flux. Prediction results based on a simple accumulation model found that the content of seven toxic elements (Cr, Ni, Cu, Zn, As, Cd, and Pb) in soils could increase rapidly due to the impact of annual atmospheric deposition, and the increasing amounts of them reached 0.063, 0.012, 0.026, 0.459, 0.076, 0.004, and 0.145 mg kg^?1, respectively. In addition, the annual increasing rates ranged from 0.05% (Cr and Ni) to 2.08% (Cd). It was also predicted that atmospheric deposition induced the accumulation of Cr and Cd in surface soils. Cd was the critical element with the greatest potential ecological risk among all the elements in atmospheric deposition.     

Sphagnum mosses as archives of recent and past atmospheric lead deposition in Switzerland

Sphagnum mosses received from a herbarium and collected recently from a peat bog surface, were used to assess the isotopic character of past and recent atmospheric Pb deposition in Switzerland and to constrain possible Pb sources. Lead removed from the moss surface was isotopically similar to that measured in the corresponding solid plant, suggesting that neither preservative actions for the herbarium samples nor dust had affected the isotopic composition of the samples. The addition of HCl to aqueous extracts to remove surface particles from the plants released more Pb compared to H₂O alone. The changes in isotope ratios between Sphagnum collected during the past c. 130 yr were significantly greater than the small fluctuations between and among species collected at any one time. Three isotope ratio plots and emission inventories indicated that the most likely source of atmospheric Pb was coal-burning at the turn of the century, fly ash from waste incineration until approximately 1950, and gasoline combustion after that. The pollution record derived from the Sphagnum plants is in good agreement with other archives from Switzerland (peat, sediment, ice) and with other herbarium records in Europe.     

Use of mosses (Hylocomium splendens and Pleurozium schreberi) as biomonitors of heavy metal deposition: from relative to absolute deposition values

Concentrations of 48 elements in the ground growing mosses Hylocomium splendens and Pleurozium schreberi have been compared with wet deposition data for the same elements at 13 Norwegian sites. Significant positive correlations were found for V, Fe, Co, As, Y, Mo, Cd, Sb, Ce, Sm, Er, Tl and Pb in Hylocomium splendens, and for Mg, V, Fe, Co, As, Se, Y, Mo, Cd, Sb, Tl and Pb in Pleurozium schreberi. Regression equations for transforming moss concentration data to absolute deposition rates have been calculated for those of the above elements which are of interest from a pollution point of view. The concentration levels of Li, Be, Mg, Ca, Zn, Ge, As, Se, Sr, Y, Zr, Sn, Cs, Ba, La, Ce, Pr, Nd, Sm, Ho, Yb, Hf, Ta and U were similar in the two moss species. Hylocomium splendens had highest concentrations of Cr, Fe, Co, Ni, Cu, Ga, Nb, Mo, Sb, Eu, Gd, Tb, Dy, Er, Tm, Lu, W, Tl, Pb and Th, whereas V, Mn, Rb and Cd were highest in Pleurozium schreberi. No variations were observed in the concentrations of the studied elements during the sampling season.     

Nitrogen concentrations in mosses indicate the spatial distribution of atmospheric nitrogen deposition in Europe

In 2005/6, nearly 3000 moss samples from (semi-)natural location across 16 European countries were collected for nitrogen analysis. The lowest total nitrogen concentrations in mosses (<0.8%) were observed in northern Finland and northern UK. The highest concentrations (≥1.6%) were found in parts of Belgium, France, Germany, Slovakia, Slovenia and Bulgaria. The asymptotic relationship between the nitrogen concentrations in mosses and EMEP modelled nitrogen deposition (averaged per 50 km × 50 km grid) across Europe showed less scatter when there were at least five moss sampling sites per grid. Factors potentially contributing to the scatter are discussed. In Switzerland, a strong (r² = 0.91) linear relationship was found between the total nitrogen concentration in mosses and measured site-specific bulk nitrogen deposition rates. The total nitrogen concentrations in mosses complement deposition measurements, helping to identify areas in Europe at risk from high nitrogen deposition at a high spatial resolution.     

Active moss biomonitoring of trace elements with Sphagnum girgensohnii moss bags in relation to atmospheric bulk deposition in Belgrade, Serbia

Active biomonitoring with wet and dry moss bags was used to examine trace element atmospheric deposition in the urban area of Belgrade. The element accumulation capability of Sphagnum girgensohnii Russow was tested in relation to atmospheric bulk deposition. Moss bags were mounted for five 3-month periods (July 2005-October 2006) at three representative urban sites. For the same period monthly bulk atmospheric deposition samples were collected. The concentrations of Al, V, Cr, Mn, Fe, Ni, Cu, Zn, As, Cd, and Pb were determined by instrumental neutron activation analyses and atomic absorption spectrometry. Significant accumulation of most elements occurred in the exposed moss bags compared with the initial moss content. High correlations between the elements in moss and bulk deposits were found for V, Cu, As, and Ni. The enrichment factors of the elements for both types of monitor followed the same pattern at the corresponding sites.     

Biomonitoring trace element atmospheric deposition using lichens in China

Concentrations of 32 elements, Ag, As, Au, Ba, Ca, Ce, Co, Cr, Cs, Eu, Fe, Hf, K, La, Lu, Mo, Na, Nd, Ni, Rb, Sb, Sc, Se, Sm, Sr, Ta, Tb, Th, U, W, Yb, and Zn were determined by instrumental neutron activation analysis (INAA) in the early preserved epiphytic lichens (Parmotrema recticulatum) from the remote southwestern China area in the 1960s, 1980s and 1990s. The concentrations of Ag, As, Ce, Cr, Cs, Eu, Fe, Hf, La, Nd, Ni, Sc, Se, Sm, Tb, U, Yb and Zn were dropped down by the temporal prolongation. The elemental concentration levels obtained from the organisms indicate that the extent of heavy metal atmospheric deposition among the sampling sites has been declining during the past decades.     

Estimation of the atmospheric emissions of trace elements from anthropogenic sources in Europe

The total emissions of 15 elements from various anthropogenic sources in Europe are presented here. The data were obtained on the basis of trace element emission factors and statistical information on the consumption of ores, rocks and fuels and the production of various types of industrial goods. Available information on types of fuels, ores and rocks and differences in manufacturing techniques used in the European countries have been taken into account. Different types of dust removal installations and their effectiveness have also been considered, as well as import-export relations of fuels and ores between particular countries. The author assessed the spatial distributions of trace element emissions based on information on location of industrial areas in Europe and plant capacities.     

Spatial patterns in wet and dry deposition of atmospheric mercury and trace elements in central Illinois,USA

An intensive 1-month atmospheric sampling campaign was conducted concurrently at eight monitoring sites in central Illinois, USA, from June 9 to July 3, 2011 to assess spatial patterns in wet and dry deposition of mercury and other trace elements. Summed wet deposition of mercury ranged from 3.1 to 5.4 μg/m² across sites for the total study period, while summed dry deposition of reactive mercury (gaseous oxidized mercury plus particulate bound mercury) ranged from 0.7 to 1.6 μg/m², with no statistically significant differences found spatially between northern and southern sites. Ratios of summed wet to summed dry mercury deposition across sites ranged from 2.2 to 4.9 indicating that wet deposition of mercury was dominant during the study period. Volume-weighted mean mercury concentrations in precipitation were found to be significantly higher at northern sites, while precipitation depth was significantly higher at southern sites. These results showed that substantial amounts of mercury deposition, especially wet deposition, occurred during the study period relative to typical annual wet deposition levels. Summed wet deposition of anthropogenic trace elements was much higher, compared to summed dry deposition, for sulfur, selenium, and copper, while at some sites summed dry deposition dominated summed wet deposition for lead and zinc. This study highlights that while wet deposition of Hg was dominant during this spring/summer-season study, Hg dry deposition also contributed an important fraction and should be considered for implementation in future Hg deposition monitoring studies.     

Annual input fluxes and source identification of trace elements in atmospheric deposition in Shanxi Basin: the largest coal base in China

Industrialization and urbanization have led to a great deterioration of air quality and provoked some serious environmental concerns. One hundred and five samples of atmospheric deposition were analyzed for their concentrations of 13 trace elements (As, Cd, Cu, Fe, Al, Co, Cr, Hg, Mn, Mo, Pb, Se, and Zn) in Shanxi Basin, which includes six isolate basins. The input fluxes of the trace elements in atmospheric deposition were observed and evaluated. Geostatistical analysis (EF, PCA, and CA ) were conducted to determine the spatial distribution, possible sources, and enrichment degrees of trace elements in atmospheric deposition. Fe/Al and K/Al also contribute to identify the sources of atmospheric deposition. The distribution of trace elements in atmospheric deposition was proved to be geographically restricted. The results show that As, Cd, Pb, Zn, and Se mainly come from coal combustion. Fe, Cu, Mn, Hg, and Co originate mainly from interactions between local polluted soils and blowing dust from other places, while the main source of Al, Cr, and Mo are the soil parent materials without pollution. This work provides baseline information to develop policies to control and reduce trace elements, especially toxic elements, from atmospheric deposition. Some exploratory analytical methods applied in this work are also worth considering in similar researches.     

Multi-elements atmospheric deposition study in Albania

For the first time, the moss biomonitoring technique and inductively coupled plasma–atomic emission spectrometric (ICP-AES) analytical technique were applied to study multi-element atmospheric deposition in Albania. Moss samples (Hypnum cupressiforme) were collected during the summer of 2011 and September–October 2010 from 62 sites, evenly distributed over the country. Sampling was performed in accordance with the LRTAP Convention–ICP Vegetation protocol and sampling strategy of the European Programme on Biomonitoring of Heavy Metal Atmospheric Deposition. ICP-AES analysis made it possible to determine concentrations of 19 elements including key toxic metals such as Pb, Cd, As, and Cu. Cluster and factor analysis with varimax rotation was applied to distinguish elements mainly of anthropogenic origin from those predominantly originating from natural sources. Geographical distribution maps of the elements over the sampled territory were constructed using GIS technology. The median values of the elements in moss samples of Albania were high for Al, Cr, Ni, Fe, and V and low for Cd, Cu, and Zn compared to other European countries, but generally were of a similar level as some of the neighboring countries such as Bulgaria, Croatia, Kosovo, Macedonia, and Romania. This study was conducted in the framework of ICP Vegetation in order to provide a reliable assessment of air quality throughout Albania and to produce information needed for better identification of contamination sources and improving the potential for assessing environmental and health risks in Albania, associated with toxic metals.     

Response of mosses to the heavy metal deposition in Poland--an overview

Concentrations of heavy metals (Cd, Cr, Cu, Fe, Ni, Pb, Zn) in Pleurozium schreberi (Brid.) Mitt., a common moss species, were used to indicate relative levels of atmospheric deposition in Poland in the years 1975-1998. Spatial and temporal differences in the heavy metal concentrations in mosses were found. The highest concentration of heavy metals was recorded in the moss samples from the southern, most industrialised part of the country, and the lowest from north-eastern Poland. A significant decrease of heavy metals over 20 years (1975-1998) was found.     

Atmospheric dry deposition fluxes of trace elements measured in Bursa, Turkey

Trace element dry deposition fluxes were measured using a smooth, greased, knife-edge surrogate surface (KSS) holding greased Mylar strips in Bursa, Turkey. Sampling program was conducted between October 2002 and June 2003 and 46 dry deposition samples were collected. The average fluxes of crustal metals (Mg, Ca, and Fe) were one to four orders of magnitude higher than the fluxes of anthropogenic metals. Trace element fluxes ranged from 3 (Cd) to 24,230 (Ca) microg m(-2) d(-1). The average trace element dry deposition fluxes measured in this study were similar to those measured in other urban areas. In addition, ambient air samples were also collected simultaneously with flux samples and concentrations of trace elements, collected with a TSP sampler, were between 0.7 and 4900 ng m(-3) for Cd and Ca, respectively. The overall trace element dry deposition velocities, calculated by dividing the fluxes to the particle phase concentrations ranged from 2.3+/-1.7 cm s(-1) (Pb) to 11.1+/-6.4 cm s(-1) (Ni). These values are in good agreement with the values calculated using similar techniques. The anthropogenic and crustal contributions were estimated by employing enrichment factors (EFs) calculated relative to the average crustal composition. Low EFs for dry deposition samples were calculated. This is probably due to contamination of local dust and its important contribution to the collected samples.     

Distribution and seasonal variability of trace elements in atmospheric particulate in the Venice Lagoon

Size distribution and selected element concentrations of atmospheric particulate matter (PM) were investigated in the Venice Lagoon, at three sites characterised by different anthropogenic influence. The PM₁₀ samples were collected in six size fractions (10-7.2, 7.2-3.0, 3.0-1.5, 1.5-0.95; 0.95-0.49 and <0.49 μm) with high volume cascade impactors, and the concentration of 17 elements (Al, As, Ca, Cd, Co, Cu, Fe, K, Li, Mg, Mn, Na, Ni, Pb, Sr, V, Zn) was determined by inductively coupled plasma quadrupole mass spectroscopy. More than 1 year of sampling activities allowed the examination of seasonal variability in size distribution of atmospheric particulates and element contents for each site.At all the stations, particles with an aerodynamic diameter <3 μm were predominant, thus accounting for more than 78% of the total aerosol mass concentration. The highest PM₁₀ concentrations for almost all elements were found at the site which is more influenced by industrial and urban emissions. Similarity in size distribution of elements at all sites allowed the identification of three main behavioural types: (a) elements found mainly within coarse particles (Ca, Mg, Na, Sr); (b) elements found mainly within fine particles (As, Cd, Ni, Pb, V) and (c) elements with several modes spread throughout the entire size range (Co, Cu, Fe, K, Zn, Mn).Factor Analysis was performed on aerosol data separately identified as fine and coarse types in order to examine the relationships between the inorganic elements and to identify their origin. Multivariate statistical analysis and assessment of similarity in the size distribution led to similar conclusions on the sources.     

Ambient concentrations and dry deposition fluxes of trace elements in Izmir,Turkey

Dry deposition samples were collected using a smooth surrogate surface at the Kaynaklar Campus of the Dokuz Eylul University in Izmir, Turkey. Concurrently ambient aerosol samples were collected. All samples were analyzed for anthropogenic and crustal trace elements. The average trace element concentrations and fluxes measured in this study were generally higher than those reported previously for urban and rural areas. The contribution of local terrestrial and anthropogenic sources were also investigated using enrichment factors (EFs) calculated relative to the local soil. Relatively lower EFs for ambient samples and high ambient concentrations indicated that the local soil was polluted and contributed significantly to ambient trace element concentrations. Deposition samples had higher EFs than the air samples. The EF sequences of trace elements were also different for deposition and ambient samples, probably due to the fact they have different mass median diameters and deposition velocities. The overall dry deposition velocities for trace elements calculated by dividing the particulate fluxes measured with the surrogate surfaces by ambient concentrations ranged from 0.6 (Al) to 6.2 cm s⁻¹ (Fe). The agreement between the experimental dry deposition velocities determined in this study and the previously reported ones using similar techniques for trace elements was good.     

Atmospheric transport and deposition of trace elements onto the Greenland Ice Sheet

Airborne particles of diameter > 0.4 μm reaching Dye 3, Greenland during April–May 1983 were highly variable in size and concentration from day to day. Five-day backward air mass trajectories suggest the importance of long-range transport from more northerly latitudes on days with high concentrations; particle sizes were larger on these days. Lower concentrations and smaller particle sizes were associated with transport from the south. It is inferred that Dye 3 may receive material emitted from Eurasian sources and transported over the Pole, similar to inferences for more northern Arctic sites.Elemental analysis of individual particles showed an abundance of crustal material, with many particles also containing sulfur. Bulk chemical analyses of airborne particles and fresh snow, collected during three snowstorms where ice nucleation dominated, provided data which were used to estimate mass-basis scavenging ratios. Average scavenging ratios were in the range ~1000–2000 for the crustal elements Al, Fe, K, Mg, Mn, and Na. Similar values were observed for Cd, Cu and NO₃⁻. The corresponding ratios for Pb and SO₄²⁻ averaged less than 200. These ratios were used with precipitation rate data to estimate wet deposition velocities in the order of ~2 cm s⁻¹ for the first nine species, and ~0.2 cm s⁻¹ for Pb and SO₄²⁻. Comparing fresh and older surface snow concentrations gave an average dry deposition velocity of roughly 0.2 cm s⁻¹ for the crustal elements, with the small fraction of large particles (~5–10 μm) dominating deposition; much smaller values were associated with the remaining species. When used with other data in the literature, the results of this study suggest that total deposition velocities of Pb and SO₄²⁻ may be as small as 0.05 cm s⁻¹ in relatively dry regions of the Arctic.     

Source apportionment and deposition of dustfall-bound trace elements around Tabriz,Iran

Environmental Science and Pollution Research - The monthly and spatial variations of atmospheric dustfall (DF) and their elemental components were determined. The DF sampling was performed using...