Simulating Urban-Scale Air Pollutants and Their Predicting Capabilities over the Seoul Metropolitan Area

Abstract

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter >10 μm, and ozone (O₃) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km × 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of ～0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

New indicator approaches for effective urban air quality management

Measurements of urban air quality at monitoring stations in developed countries have frequently involved the criteria gaseous pollutants, particulates, hazardous air pollutants, perceived air quality and relevant meteorological conditions. Large numbers of indicators have therefore been established to quantify emissions, concentrations and environmental and human health impacts of each of these groups of substances. To simplify the data for management, several indicators have been grouped together to form urban air quality indices but the weightings of individual variables is contentious. In industrialising and developing countries, data may be limited and traditional air pollutant indicators cannot often be constructed. The emphasis therefore has to be placed on the development of policy-relevant indicators, such as Response Indicators that reflect different policy principles for regulating air pollutant emissions. Indices that quantify the air quality management capabilities and capacities at the city level provide further useful decision-relevant tools. Four sets of indices, namely, 1. air quality measurement capacity, 2. data assessment and availability, 3. emissions estimates, and 4. management enabling capabilities, and a composite index to evaluate air quality management capability, were constructed and applied to 80 cities. The indices revealed that management capability varied widely between the cities. In some of the cities, existing national knowledge on urban air quality could have been more effectively used for management. It was concluded that for effective urban air quality management, a greater emphasis should be given, not just to monitoring and data capture programmes, but to the development of indicators and indices that empower decision-makers to initiate management response strategies. Over-reliance on restricted, predetermined sets of traditional air quality indicators should be avoided.     

Air pollution in cities

Air quality in cities is the result of a complex interaction between natural and anthropogenic environmental conditions. Air pollution in cities is a serious environmental problem – especially in the developing countries. The air pollution path of the urban atmosphere consists of emission and transmission of air pollutants resulting in the ambient air pollution. Each part of the path is influenced by different factors. Emissions from motor traffic are a very important source group throughout the world. During transmission, air pollutants are dispersed, diluted and subjected to photochemical reactions. Ambient air pollution shows temporal and spatial variability. As an example of the temporal variability of urban air pollutants caused by motor traffic, typical average annual, weekly and diurnal cycles of NO, NO₂, O₃ and O_x are presented for an official urban air-quality station in Stuttgart, southern Germany. They are supplemented by weekly and diurnal cycles of selected percentile values of NO, NO₂, and O₃. Time series of these air pollutants give information on their trends. Results are discussed with regard to air pollution conditions in other cities. Possibilities for the assessment of air pollution in cities are shown. In addition, a qualitative overview of the air quality of the world's megacities is given.     

Simulating urban-scale air pollutants and their predicting capabilities over the Seoul metropolitan area

Urban-scale air pollutants for sulfur dioxide, nitrogen dioxide, particulate matter with aerodynamic diameter > or = 10 microm, and ozone (O3) were simulated over the Seoul metropolitan area, Korea, during the period of July 2-11, 2002, and their predicting capabilities were discussed. The Air Pollution Model (TAPM) and the highly disaggregated anthropogenic and the biogenic gridded emissions (1 km x 1 km) recently prepared by the Korean Ministry of Environment were applied. Wind fields with observational nudging in the prognostic meteorological model TAPM are optionally adopted to comparatively examine the meteorological impact on the prediction capabilities of urban-scale air pollutants. The result shows that the simulated concentrations of secondary air pollutant largely agree with observed levels with an index of agreement (IOA) of >0.6, whereas IOAs of approximately 0.4 are found for most primary pollutants in the major cities, reflecting the quality of emission data in the urban area. The observationally nudged wind fields with higher IOAs have little effect on the prediction for both primary and secondary air pollutants, implying that the detailed wind field does not consistently improve the urban air pollution model performance if emissions are not well specified. However, the robust highest concentrations are better described toward observations by imposing observational nudging, suggesting the importance of wind fields for the predictions of extreme concentrations such as robust highest concentrations, maximum levels, and >90th percentiles of concentrations for both primary and secondary urban-scale air pollutants.     

清洁能源实施效果评价

2001年11月启动的中国国家"十五"攻关重大专项"清洁能源行动"涉及17个试点示范城市,经过3年多的探索与实施,取得了明显成效.着重从污染物排放、空气质量、清洁能源消费、人均能耗和万元产值能耗等环境效益方面对清洁能源实施效果进行科学评价,为推广试点示范城市的先进经验和城市可持续发展提供依据.     

Air Pollution in Six Major U. S. Cities as Measured by the Continuous Air Monitoring Program

Data obtained by the Continuous Air Monitoring Program (CAMP) in six cities during two years are summarized. Six gaseous pollutants were monitored in Cincinnati, Chicago, New Orleans, Philadelphia, San Francisco, and Washington, D. C. during 1962 and 1963. The data serve as a basis for describing several contrasts and similarities in the nature of air pollution experienced in six cities, which represent a broad geographical and climatological range of urbayi environments. Specific topics covered are: typical pollutant levels, patterns of daily and seasonal variations, and unusual phenomena such as atmospheric stagnation periods and photochemical smog formation.     

Extending the Kolmogorov-Zurbenko filter: application to ozone, particulate matter, and meteorological trends

Tropospheric ozone (O3) and particulate matter (PM) are pollutants of great concern to air quality managers. Federal standards for these pollutants have been promulgated in recent years because of the known adverse effects of the pollutants on human health, the environment, and visibility. Local meteorological conditions exert a strong influence over day-to-day variations in pollutant concentrations; therefore, the meteorological signal must be removed in order for air quality planners and managers to examine underlying emissions-related trends and make better air quality management decisions for the future. Although the Kolmogorov-Zurbenko (KZ) filter has been widely used for this type of trend separation in O3 studies in the eastern United States, this article aims to extend the method in three key ways. First, whereas the KZ filter is known as a useful tool for O3 analysis, this study also evaluates its effectiveness when applied to PM. Second, the method was applied to Tucson, AZ, a city in the semi-arid southwestern United States (Southwest), to evaluate the appropriateness of the method in a region with weaker synoptic weather controls on air quality than the eastern United States. Third, additional forms of output were developed and tailored to be more applicable to decision-makers' needs through a partnership between academic researchers and air quality planners and managers. Results of the study indicate that the KZ filter is a useful method for examining emissions-related PM trends, resulting in small, but potentially significant, differences after adjustment. For the Tucson situation with weaker synoptic controls, the KZ method identified mixing height as a more important variable than has been found in other cities.     

Air quality management: evolution of policy and practice in the UK as exemplified by the experience of English local government

The air quality management (AQM) framework in the UK is designed to be an effects-based solution to air pollutants currently affecting human health. The AQM process has been legislated through The Environment Act 1995, which required the National Air Quality Strategy (NAQS) to be published. AQM practice and capability within local authorities has flourished since the publication of the NAQS in March 1997. This paper outlines the policy framework within which the UK operates, both at a domestic and European level, and reviews the air quality management process relating to current UK policy and EU policy. Data from questionnaire surveys are used to indicate the involvement of various sectors of local government in the air quality management process. These data indicate an increasing use of monitoring, and use of air dispersion modelling by English local authorities. Data relating to the management of air quality, for example, the existence and work of air quality groups, dissemination of information to the public and policy measures in place on a local scale to improve air quality, have also been reported. The UK NAQS has been reviewed in 1999 to reflect developments in European legislation, technological and scientific advances, improved air pollution modelling techniques and an increasingly better understanding of the socio-economic issues involved. The AQM process, as implemented by UK local authorities, provides an effective model for other European member states with regards to the implementation of the Air Quality Framework Directive. The future direction of air quality policy in the UK is also discussed.     

Megacities and atmospheric pollution

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog--induced primarily from traffic, but also from industrial activities, power generation, and solvents--has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to climate change. Yet, with appropriate planning, megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems. This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. While each city--its problems, resources, and outlook--is unique, the need for a holistic approach to the complex environmental problems is the same. There is no single strategy in reducing air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialog is essential to effectively implement the regulations required to address air quality problems.     

The Effect of California’s Wintertime Oxygenated Fuels Program on Ambient Carbon Monoxide Concentrations

Abstract

The U.S. Environmental Protection Agency (EPA) mandated the use of oxygenated gasoline beginning in the winter of 1992 to reduce the unhealthful carbon monoxide concentrations in many urban areas. The California Air Resources Board (CARB), weighing the potential effects of the program on other pollutants, implemented a modified version of the federal wintertime oxygenated fuels program. In California, the number of violations of the carbon monoxide air quality standard during the three winters associated with the program was dramatically lower than during any winter prior to the program. Because meteorological conditions during the program were very favorable for dispersion of pollutants, any analysis of the impacts of the program must account for the influence of variable meteorological conditions. Analyses of ambient pollutant concentrations suggest that most of the air quality improvement was due to increased atmospheric dispersion. The analyses presented here account for the large influence of meteorology on ambient concentrations and indicate that California’s modified oxygenated fuels program was responsible for an approximately 5–10% reduction in mean ambient carbon monoxide concentrations, depending on the statistical approach used.     

Calculating Air Quality and Its Control

Air quality is shown as a function of averaging times of five minutes to one year for carbon monoxide, hydrocarbons, nitric oxide, nitrogen dioxide, nitrogen oxides, oxidant, and sulfur dioxide in Chicago, Cincinnati, Los Angeles, New Orleans, Philadelphia, San Francisco, and Washington, D. C. Concentrations are approximately lognormally distributed for all pollutants in all cities for all averaging times. Maximum concentration is inversely proportional to averaging time to an exponent. The exponent is a function of the standard geometric deviation. General air quality and control parameters are derived and shown for one example, nitrogen oxides in Washington, D. C. These values are compared to one air quality standard.     

Application of an integrated Weather Research and Forecasting (WRF)/CALPUFF modeling tool for source apportionment of atmospheric pollutants for air quality management: A case study in the urban area of Benxi,China

In this study, the authors endeavored to develop an effective framework for improving local urban air quality on meso-micro scales in cities in China that are experiencing rapid urbanization. Within this framework, the integrated Weather Research and Forecasting (WRF)/CALPUFF modeling system was applied to simulate the concentration distributions of typical pollutants (particulate matter with an aerodynamic diameter <10 μm [PM₁₀], sulfur dioxide [SO₂], and nitrogen oxides [NO_x]) in the urban area of Benxi. Statistical analyses were performed to verify the credibility of this simulation, including the meteorological fields and concentration fields. The sources were then categorized using two different classification methods (the district-based and type-based methods), and the contributions to the pollutant concentrations from each source category were computed to provide a basis for appropriate control measures. The statistical indexes showed that CALMET had sufficient ability to predict the meteorological conditions, such as the wind fields and temperatures, which provided meteorological data for the subsequent CALPUFF run. The simulated concentrations from CALPUFF showed considerable agreement with the observed values but were generally underestimated. The spatial-temporal concentration pattern revealed that the maximum concentrations tended to appear in the urban centers and during the winter. In terms of their contributions to pollutant concentrations, the districts of Xihu, Pingshan, and Mingshan all affected the urban air quality to different degrees. According to the type-based classification, which categorized the pollution sources as belonging to the Bengang Group, large point sources, small point sources, and area sources, the source apportionment showed that the Bengang Group, the large point sources, and the area sources had considerable impacts on urban air quality. Finally, combined with the industrial characteristics, detailed control measures were proposed with which local policy makers could improve the urban air quality in Benxi. In summary, the results of this study showed that this framework has credibility for effectively improving urban air quality, based on the source apportionment of atmospheric pollutants.

Implications: The authors endeavored to build up an effective framework based on the integrated WRF/CALPUFF to improve the air quality in many cities on meso-micro scales in China. Via this framework, the integrated modeling tool is accurately used to study the characteristics of meteorological fields, concentration fields, and source apportionments of pollutants in target area. The impacts of classified sources on air quality together with the industrial characteristics can provide more effective control measures for improving air quality.

Through the case study, the technical framework developed in this study, particularly the source apportionment, could provide important data and technical support for policy makers to assess air pollution on the scale of a city in China or even the world.     

A New Multipollutant,No-Threshold Air Quality Health Index Based on Short-Term Associations Observed in Daily Time-Series Analyses

Abstract

Air quality indices currently in use have been criticized because they do not capture additive effects of multiple pollutants, or reflect the apparent no-threshold concentration-response relationship between air pollution and health. We propose a new air quality health index (AQHI), constructed as the sum of excess mortality risk associated with individual pollutants from a time-series analysis of air pollution and mortality in Canadian cities, adjusted to a 0–10 scale, and calculated hourly on the basis of trailing 3-hr average pollutant concentrations. Extensive sensitivity analyses were conducted using alternative combinations of pollutants from single and multi-pollutant models. All formulations considered produced frequency distributions of the daily maximum AQHI that were right-skewed, with modal values of 3 or 4, and less than 10% of values at 7 or above on the 10-point scale. In the absence of a gold standard and given the uncertainty in how to best reflect the mix of pollutants, we recommend a formulation based on associations of nitrogen dioxide, ozone, and particulate matter of median aerodynamic diameter less than 2.5 µm with mortality from single-pollutant models. Further sensitivity analyses revealed good agreement of this formulation with others based on alternative sources of coefficients drawn from published studies of mortality and morbidity. These analyses provide evidence that the AQHI represents a valid approach to formulating an index with the objective of allowing people to judge the relative probability of experiencing adverse health effects from day to day. Together with health messages and a graphic display, the AQHI scale appears promising as an air quality risk communication tool.     

A new multipollutant, no-threshold air quality health index based on short-term associations observed in daily time-series analyses

Air quality indices currently in use have been criticized because they do not capture additive effects of multiple pollutants, or reflect the apparent no-threshold concentration-response relationship between air pollution and health. We propose a new air quality health index (AQHI), constructed as the sum of excess mortality risk associated with individual pollutants from a time-series analysis of air pollution and mortality in Canadian cities, adjusted to a 0-10 scale, and calculated hourly on the basis of trailing 3-hr average pollutant concentrations. Extensive sensitivity analyses were conducted using alternative combinations of pollutants from single and multipollutant models. All formulations considered produced frequency distributions of the daily maximum AQHI that were right-skewed, with modal values of 3 or 4, and less than 10% of values at 7 or above on the 10-point scale. In the absence of a gold standard and given the uncertainty in how to best reflect the mix of pollutants, we recommend a formulation based on associations of nitrogen dioxide, ozone, and particulate matter of median aerodynamic diameter less than 2.5 microm with mortality from single-pollutant models. Further sensitivity analyses revealed good agreement of this formulation with others based on alternative sources of coefficients drawn from published studies of mortality and morbidity. These analyses provide evidence that the AQHI represents a valid approach to formulating an index with the objective of allowing people to judge the relative probability of experiencing adverse health effects from day to day. Together with health messages and a graphic display, the AQHI scale appears promising as an air quality risk communication tool.     

Airborne Survey of Major Air Basins in California

An instrumented aircraft has been used to study photochemical air pollution in the State of California. Simultaneous measurements of the most important chemical constituents (ozone, total oxidant, hydrocarbons, and nitrogen oxides, as well as several meteorological variables) were made. State-of-the-art measurement techniques and sampling procedures are discussed. Data from flights over the South Coast Air Basin, the San Francisco Bay area, the Salinas Valley, and the Pacific Ocean within 200 miles of the California coast are presented. Pollutants were found to be concentrated in distinct layers up to at least 18,000 feet. In many of these layers, the pollutant concentrations were much higher than at ground level. Furthermore, the presence of stable air very effectively inhibits the dilution of air masses for distances of 30 miles or more. Very low levels of ozone were recorded over the Pacific Ocean and measurements relating to air mass aging were made. The background ozone level for the South Coast Air Basin is estimated to be 0.03 ppm. These findings bring into question the validity of the present practice of depending solely on data from ground-based monitoring stations for predictive models.     

Extending the Kolmogorov–Zurbenko Filter: Application to Ozone,Particulate Matter,and Meteorological Trends

Abstract

Tropospheric ozone (O₃) and particulate matter (PM) are pollutants of great concern to air quality managers. Federal standards for these pollutants have been promulgated in recent years because of the known adverse effects of the pollutants on human health, the environment, and visibility. Local meteorological conditions exert a strong influence over day‐to‐day variations in pollutant concentrations; therefore, the meteorological signal must be removed in order for air quality planners and managers to examine underlying emissions-related trends and make better air quality management decisions for the future. Although the Kolmogorov–Zurbenko (KZ) filter has been widely used for this type of trend separation in O₃ studies in the eastern United States, this article aims to extend the method in three key ways. First, whereas the KZ filter is known as a useful tool for O₃ analysis, this study also evaluates its effectiveness when applied to PM. Second, the method was applied to Tucson, AZ, a city in the semi‐arid southwestern United States (Southwest), to evaluate the appropriateness of the method in a region with weaker synoptic weather controls on air quality than the eastern United States. Third, additional forms of output were developed and tailored to be more applicable to decision-makers’ needs through a partnership between academic researchers and air quality planners and managers. Results of the study indicate that the KZ filter is a useful method for examining emissions‐related PM trends, resulting in small, but potentially significant, differences after adjustment. For the Tucson situation with weaker synoptic controls, the KZ method identified mixing height as a more important variable than has been found in other cities.     

Process analysis of a regional air pollution episode over Pearl River Delta Region,China, using the MM5-CMAQ model

This study focuses on the influences of a warm high-pressure meteorological system on aerosol pollutants, employing the simulations by the Models-3/CMAQ system and the observations collected during October 10–12, 2004, over the Pearl River Delta (PRD) region. The results show that the spatial distributions of air pollutants are generally circular near Guangzhou and Foshan, which are cities with high emissions rates. The primary pollutant is particulate matter (PM) over the PRD. MM5 shows reasonable performance for major meteorological variables (i.e., temperature, relative humidity, wind direction) with normalized mean biases (NMB) of 4.5–38.8% and for their time series. CMAQ can capture one peak of all air pollutant concentrations on October 11, but misses other peaks. The CMAQ model systematically underpredicts the mass concentrations of all air pollutants. Compared with chemical observations, SO₂ and O₃ are predicted well with a correlation coefficient of 0.70 and 0.65. PM_2.5 and NO are significantly underpredicted with an NMB of 43% and 90%, respectively. The process analysis results show that the emission, dry deposition, horizontal transport, and vertical transport are four main processes affecting air pollutants. The contributions of each physical process are different for the various pollutants. The most important process for PM₁₀ is dry deposition, and for NO_x it is transport. The contributions of horizontal and vertical transport processes vary during the period, but these two processes mostly contribute to the removal of air pollutants at Guangzhou city, whose emissions are high. For this high-pressure case, the contributions of the various processes show high correlations in cities with the similar geographical attributes. According to the statistical results, cities in the PRD region are divided into four groups with different features. The contributions from local and nonlocal emission sources are discussed in different groups.

Implications: The characteristics of aerosol pollution episodes are intensively studied in this work using the high-resolution modeling system MM5/SMOKE/CMAQ, with special efforts on examining the contributions of different physical and chemical processes to air concentrations for each city over the PRD region by a process analysis method, so as to provide a scientific basis for understanding the formation mechanism of regional aerosol pollution under the high-pressure system over PRD.     

Long-Term Wind Speed Variations for Three Midwestern U.S. Cities

Abstract

Long-term wind speed variations were investigated for three midwestern cities including Indianapolis, IN; Cincinnati, OH; and Little Rock, AR in the continental United States. These cities were chosen because their topography is relatively ?at and unaffected by large mountain ranges or other topographical features, they represent important regional economic centers, and they have all undergone major air quality management efforts over the past 35 yr to attempt to meet the National Ambient Air Quality Standards. The hourly data were obtained from the National Climatic Data Center from 1943 to 2008 for Indianapolis and Little Rock and from 1948 to 2008 for Cincinnati. The analysis included calculating the frequency of calms and wind speeds over five different bins for the respective cities. The results indicate a significant increase in the frequency of calms (statistical significance >99.999%) and a decrease in the overall frequency of other wind speeds for all three cities. Increasing trend in calms is more predominant during the ozone season (April through October). The results from regression analysis, significance testing, and spatial correlation analysis support the argument that a common “midwestern” large-scale atmospheric forcing is in?uencing surface wind speed in this area. It was found that for all three cities the Pacific North American (PNA) teleconnection pattern has the highest relative association with the trends in wind speed. The results support large-scale continental effects (like teleconnections) as a hypothesis to be examined more closely along with already established evidence of the influence of the Pacific and Atlantic teleconnection anomalies. Reduced wind speed may have implications on air quality management efforts in the region. Increases in the frequency of calms would affect ozone distribution patterns and may suggest a need to make changes to their ozone mitigation strategy. Weaker winds would ventilate pollutants from these areas less effectively, which could be problematic from a human health point of view, particularly for asthmatics.     

Air Quality in Selected Megacities

Abstract

About half of the world's population now lives in urban areas because of the opportunity for a better quality of life. Many of these urban centers are expanding rapidly, leading to the growth of megacities, which are often defined as metropolitan areas with populations exceeding 10 million inhabitants. These concentrations of people and activity are exerting increasing stress on the natural environment, with impacts at urban, regional and global levels. In recent decades, air pollution has become one of the most important problems of megacities. Initially, the main air pollutants of concern were sulfur compounds, which were generated mostly by burning coal. Today, photochemical smog—induced primarily from traffic, but also from industrial activities, power generation, and solvents—has become the main source of concern for air quality, while sulfur is still a major problem in many cities of the developing world. Air pollution has serious impacts on public health, causes urban and regional haze, and has the potential to contribute significantly to global climate change. Yet, with appropriate planning megacities can efficiently address their air quality problems through measures such as application of new emission control technologies and development of mass transit systems.

This review is focused on nine urban centers, chosen as case studies to assess air quality from distinct perspectives: from cities in the industrialized nations to cities in the developing world. This review considers not only megacities, but also urban centers with somewhat smaller populations, for while each city—its problems, resources, and outlook—is unique, the need for a holistic approach to complex environmental problems is the same. There is no single strategy to reduce air pollution in megacities; a mix of policy measures will be needed to improve air quality. Experience shows that strong political will coupled with public dialogue is essential to effectively implement the regulations required to address air quality.     

Contribution of transboundary air pollution to ionic concentrations in fog in the Kinki Region of Japan

To estimate the contribution of transboundary transported air pollutants from other Asian countries to Japan in ionic concentrations in fog water in March 2005, the Community Multiscale Air Quality (CMAQ) modeling system was utilized with meteorological fields produced by the 5th generation Mesoscale Model (MM5). For meteorological predictions, the model well reproduced the surface meteorological variables, particularly temperature and humidity, and generally captured fog occurrence. For chemical predictions, most of the model-predicted monthly mean concentrations were approximately within a factor of 2 of the observations, indicating that the model well simulated the long-range atmospheric transport from the Asian Continent to Japan. For SO₄^2?, NO₃^? and NH₄⁺, the contribution rates of the transboundary air pollution in the Kinki Region of Japan ranged from 69 to 82% for aerosols, from 47 to 87% for ionic concentrations in rain, and from 55 to 79% for ionic concentrations in fog. The study found that the transboundary air pollution also affected ionic concentrations in fog as well as aerosol concentrations and ionic concentrations in rain.