Characterization of organic matter in pristine and contaminated coastal marine sediments using solid-state 13C NMR, pyrolytic and thermochemolytic methods: a case study in the San Diego harbor area.

Chemical composition of coastal marine sedimentary organic matter (SDOM) is a function of natural and anthropogenic inputs to the system. In this study a combination of analytical techniques: 13C nuclear magnetic resonance (NMR), pyrolysis-gas chromatography/mass spectrometry (Py-GC/MS) and tetramethylammonium hydroxide thermochemolysis-gas chromatography/mass spectrometry (TMAH thermochemolysis-GC/MS) were used to study the contribution of hydrophobic organic contaminants and terrestrial OM to the SDOM. Sediments were collected from two sites in the San Diego Bay: Paleta Creek, which is contaminated, and Coronado Cayes, which is relatively pristine. Concentrations of polycyclic aromatic hydrocarbons (PAHs) at both sites, as determined by ultrasonically assisted lipid extraction are found to be higher in the surface layer, to generally decrease with depth, and to be present at about two orders of magnitude higher concentration at the contaminated site as compared to the pristine site. The sediment samples were partially deashed with HF/HCI treatment before further analysis. 13C-NMR spectra of the Paleta Creek samples show a higher aromatic carbon content and a distinct phenolic carbon peak. This suggests a large input from terrestrial carbon (lignin). Data from both Py-GC/MS and TMAH thermochemolysis-GC/MS support this and indicate the presence of lignin-derived residues, primarily of the guaiacyl type at the contaminated site. In contrast, SDOM at the Coronado Cayes site exhibits less terrestrial input. In general, the SDOM resembles soil OM rather than typical marine SDOM. Chemical analyses of the lipid-extracted, partially deashed sediments, does not reveal the presence of any PAHs.     

Measurement of organic mass to organic carbon ratio in ambient aerosol samples using a gravimetric technique in combination with chemical analysis

Organic materials make up a significant fraction of ambient particulate mass. It is important to quantify their contributions to the total aerosol mass for the identification of aerosol sources and subsequently formulating effective control measures. The organic carbon (OC) mass can be determined by an aerosol carbon analyzer; however, there is no direct method for the determination of the mass of organic compounds, which also contain N, H, and O atoms in addition to C. The often-adopted approach is to estimate the organic mass (OM) from OC multiplying by a factor. However, this OC-to-OM multiplier was rarely measured for a lack of appropriate methods for OM. We report here a top-down approach to determine OM by coupling thermal gravimetric and chemical analyses. OM is taken to be the mass difference of a filter before and after heating at 550 °C in air for 4 h minus mass losses due to elemental carbon (EC), volatile inorganic compounds (e.g., NH₄NO₃), and loss of aerosol-associated water that arise from the heating treatment. The losses of EC and inorganic compounds are determined through chemical analysis of the filter before and after the heating treatment. We analyzed 37 ambient aerosol samples collected in Hong Kong during the winter of 2003, spring of 2004, and summer of 2005. A value of 2.1±0.3 was found to be the appropriate factor to convert OC to OM in these Hong Kong aerosol samples. If the dominant air mass is classified into two categories, then an OM-to-OC ratio of 2.2 was applicable to aerosols dominated by continent-originated air mass, and 1.9 was applicable to aerosols dominated by marine air mass.     

海洋环境中的有机锡及其对海洋生物的影响

本文综述了有机锡化占物对海洋环境的冲击及其对海洋生物的影响，介绍了有机锡化合物的分析方法，讨论了有机锡污染的预防和控制措施，并展望了有机锡研究的前景。     

Seasonal and spatial distribution of metals in surface sediment of an urban estuary

Aquatic pollution by metals is of concern because of various toxic effects to marine life. The Tolka Estuary, Co. Dublin, Ireland, is a typical Irish urban estuary. It has a significant metal loading originating from the urban environment. Results of a 25month analysis of cadmium, copper, lead and zinc spatial and temporal distribution over 10 sample locations in this estuary are presented in this paper. Metal concentrations were analysed using differential pulse polarography. Significant seasonal and spatial trends in metal distribution were observed over the 25months. Sediment metal concentrations gradually increased (30-120%) in spring to a maximum at the end of summer which was followed by a decrease in winter months (30-60%). Sediment organic matter (OM) concentrations exhibited similar seasonal trends and a positive correlation between OM and metal distributions was observed, implying OM had an influence on metal distributions over time.     

Fluorescence fingerprint of fulvic and humic acids from varied origins as viewed by single-scan and excitation/emission matrix techniques

Excitation/emission matrix (EEM), single-scan excitation and synchronous fluorescence spectra of a series of FA and HA from distinct environments are presented. The EEM plots show at least four spectral features whose corresponding Ex/Em pairs relate to the alpha', alpha, beta and gamma (or delta) fluorophores previously found in natural waters spectra. The alpha' and alpha peaks, which identify typical humic-like components, are present in all samples, independently of the organic matter (OM) source. In FA, their Ex/Em pairs are approximately 260 nm/460 nm and approximately 310 nm/440 nm, respectively. In HA their excitation and emission maxima are red-shifted, the corresponding Ex/Em pairs being located at approximately 265 nm/525 nm and approximately 360 nm/520 nm, respectively. The appearance of beta and gamma (or delta) peaks is dependent both on the OM origin and on HS aging. The former (Ex/Em approximately 320 nm/430 nm), that has been associated with the incidence of marine humic-like material, is present only in a few marine and estuarine HA. It emerges as a shoulder on the alpha peak and its detection is dependent on a balance between its magnitude and the magnitude and emission maxima location of the alpha peak. The gamma (or delta) peak (Ex/Em approximately 275 nm/315 nm in FA, and approximately 275 nm/330 nm in HA), on the other hand, is better visualized in FA than in HA diagrams. It has typical protein-, mainly tryptophan-like, fluorescence properties and appears with varied significance in a few marine and estuarine samples being hardly detected in samples from exclusively terrestrial environments. It is also shown in this study that with selected lambda(ex), lambda(em) and (delta)(lambda) values, regular emission, excitation and synchronous spectra can, together, provide a good picture of the OM sources and aging for extracted HS.     

Review of measured concentrations of triphenyltin compounds in marine ecosystems and meta-analysis of their risks to humans and the environment

The state of scientific knowledge regarding analytical methods, environmental fate, ecotoxicity and ecological risk of triphenyltin (TPT) compounds in marine ecosystems as well as their exposure and health hazard to humans was reviewed. Since the 1960s, TPT compounds have been commonly applied as biocides for diverse industrial and agricultural purposes. For instance, they are used as active ingredients in antifouling systems on marine vessels and mariculture facilities, and as fungicides in agriculture. Due to their intensive use, contamination of coastal waters by TPT and its products of transformation has become a worldwide problem. The proportion of quantified TPT to total phenyltin compounds in the marine environment provides evidence that TPT is photodegradable in water and sediment but resistant to biotransformation. Concentrations of TPT in marine biota are consistently greater than concentrations in water and sediment, which implies potential of TPT to bioaccumulate. TPT is toxic to both marine plants and animals. The predicted no effect concentration (PNEC) for TPT, as determined by use of the species sensitivity distribution approach, is 0.64 ng L⁻¹. In some parts of the world, concentrations of TPT in seawater exceed the PNEC, indicating that TPT can pose risks to marine life. Although there is negligible risk of TPT to average human consumers, TPT has been detected in blood of Finnish people and the concentration was greater in fishermen who ate more seafood. It is, therefore, advocated to initiate regular monitoring of TPT in blood and breast milk of populations that consume greater amounts of seafood.     

Geostatistical analysis to identify hydrogeochemical processes in complex aquifers: a case study (Aguadulce unit, Almeria, SE Spain)

The Aguadulce aquifer unit in southeastern Spain is a complex hydrogeological system because of the varied lithology of the aquifer strata and the variability of the processes that can take place within the unit. Factorial analysis of the data allowed the number of variables to be reduced to 3 factors, which were found to be related to such physico-chemical processes as marine intrusion and leaching of saline deposits. Variographic analysis was applied to these factors, culminating in a study of spatial distribution using ordinary kriging. Mapping of the factors allowed rapid differentiation of some of the processes that affect the waters of the Gador carbonate aquifer within the Aguadulce unit, without the need to recur to purely hydrogeochemical techniques. The results indicate the existence of several factors related to salinity: marine intrusion, paleowaters, and/or leaching of marls and evaporitic deposits. The techniques employed are effective, and the results conform to those obtained using hydrogeochemical methods (vertical records of conductivity and temperature, ion ratios, and others). The findings of this study confirm that the application of such analytical methods can provide a useful assessment of factors affecting groundwater composition.     

Polycyclic aromatic hydrocarbons, black carbon, and molecular markers in soils of Switzerland

Polycyclic aromatic hydrocarbons (PAH) were analysed in 23 soil samples (0–10 cm layer) from the Swiss soil monitoring network (NABO) together with total organic carbon (TOC) and black carbon (BC) concentration, as well as some PAH source diagnostic ratios and molecular markers. The concentrations of the sum of 16 EPA priority PAHs ranged from 50 to 619 μg/kg dw. Concentrations increased from arable, permanent and pasture grassland, forest, to urban soils and were 21–89% lower than median numbers reported in the literature for similar Swiss and European soils. NABO soils contained BC in concentrations from 0.4 to 1.8 mg/g dw, except for two sites with markedly higher levels. These numbers corresponded to 1–6% of TOC and were comparable to the limited published BC data in soil and sediments obtained with comparable analytical methods. The various PAH ratios and molecular markers pointed to a domination of pyrogenically formed PAHs in Swiss soils. In concert, the gathered data suggest the following major findings: (1) gas phase PAHs (naphthalene to fluorene) were long-range transported, cold-condensated at higher altitudes, and approaching equilibrium with soil organic matter (OM); (2) (partially) particle-bound PAHs (phenanthrene to benzo[ghi]perylene) were mostly deposited regionally in urban areas, and not equilibrated with soil OM; (3) Diesel combustion appeared to be a major emission source of PAH and BC in urban areas; and (4) wood combustion might have contributed significantly to PAH burdens in some soils of remote/alpine (forest) sites.     

Occurrence of PPCPs in the marine environment: a review

Little research has been conducted on the occurrence of pharmaceuticals and personal care products (PPCPs) in the marine environment despite being increasingly impacted by these contaminants. This article reviews data on the occurrence of PPCPs in seawater, sediment, and organisms in the marine environment. Data pertaining to 196 pharmaceuticals and 37 personal care products reported from more than 50 marine sites are analyzed while taking sampling strategies and analytical methods into account. Particular attention is focused on the most frequently detected substances at highest concentrations. A snapshot of the most impacted marine sites is provided by comparing the highest concentrations reported for quantified substances. The present review reveals that: (i) PPCPs are widespread in seawater, particularly at sites impacted by anthropogenic activities, and (ii) the most frequently investigated and detected molecules in seawater and sediments are antibiotics, such as erythromycin. Moreover, this review points out other PPCPs of concern, such as ultraviolet filters, and underlines the scarcity of data on those substances despite recent evidence on their occurrence in marine organisms. The exposure of marine organisms in regard to these insufficient data is discussed.     

Effects of organic matter content and composition on ammonium adsorption in lake sediments

The nature of the influence of organic matter (OM) on ammonium adsorption in lake sediments remains disputed. In this study, the kinetics and thermodynamics of ammonium adsorption were investigated on sediment samples with different OM contents (ignoring the effects of OM mineralization) previously collected from Lake Wuli, a northern bay of Lake Taihu, a shallow lake in southern China. The mechanisms of ammonium adsorption in these samples were characterized by Fourier transform infrared spectrometry and scanning electron microscopy. The results show that the ammonium adsorption capacity of the sediments is highly correlated with their OM content and with the humic content of the OM. The ammonium adsorption capacity of OM varies with its composition, i.e., with the surface properties of the different functional groups present. Indeed, humic acid was found to have a greater ammonium adsorption capacity by itself than when mixed with kerogen and black carbon, the mixture of the latter two components proving a better adsorbent than pure black carbon.     

Water-soluble organic nitrogen in atmospheric aerosol: a comparison of UV and persulfate oxidation methods

Two well established methods that are widely applied in the determination of marine dissolved organic nitrogen (DON) have been investigated in their application to the determination of rainwater DON and the water-soluble organic nitrogen component of atmospheric aerosol. Empirical observation highlighted some difficulties in the analysis of DON in these non-marine matrices, so some practical suggestions for the extension of the oxidative methods to atmospheric samples are proposed.Ten rain samples, 20 aqueous aerosol extracts, and a suite of commercially obtained organic nitrogen compounds were both chemically oxidised by persulfate and oxidised by exposure to high-intensity ultraviolet light. The total dissolved nitrogen concentration of the rains in this study ranged from 4 to 35 μM nitrogen. The aerosol extracts were diluted to a pre-oxidation concentration range of 12–65 μM N for oxidation and analysis. Both UV and persulfate methods require the aqueous extract of the aerosol organic nitrogen to be diluted approximately to rainwater concentrations for optimal oxidation efficiency, since sub-optimal recoveries and high analytical variability arise at high concentration. Some potential causes of analytical interference at higher concentration are discussed.This study shows that total dissolved nitrogen results obtained by the two methods are linearly correlated (with an R² of 0.87 for 30 samples) over the full range of natural rainwater concentrations, but results obtained using the persulfate oxidation are about 30% lower than those obtained by photo-oxidation.     

Long-term effects of submergence and wetland vegetation on metals in a 90-year old abandoned Pb-Zn mine tailings pond

A Pb-Zn tailings pond, abandoned for approximately 90 years, has been naturally colonized by Glyceria fluitans and is an excellent example of long-term metal retention in tailings ponds under various water cover and vegetation conditions. Shallow/intermittently flooded areas (dry zone) were unvegetated and low in organic matter (OM) content. Permanently flooded areas were either unvegetated with low OM, contained dead vegetation and high OM, or living plants and high OM. It was expected that either water cover or high OM would result in enhanced reducing conditions and lower metal mobility, but live plants would increase metal mobility due to root radial oxygen loss. The flooded low OM tailings showed higher As and Fe mobility compared with dry low OM tailings. In the permanently flooded areas without live vegetation, the high OM content decreased Zn mobility and caused extremely high concentrations of acid-volatile sulfides (AVS). In areas with high OM, living plants significantly increased Zn mobility and decreased concentrations of AVS, indicating root induced sediment oxidation or decreased sulfate-reduction. This is the first study reporting the ability of wetland plants to affect the metal mobility and AVS in long-term (decades), unmanaged tailings ponds.     

Extraction of organic contaminants from marine sediments and tissues using microwave energy.

In this study, we compared microwave solvent extraction (MSE) to conventional methods for extracting organic contaminants from marine sediments and tissues with high and varying moisture content. The organic contaminants measured were polychlorinated biphenyl (PCB) congeners, chlorinated pesticides, and polycyclic aromatic hydrocarbons (PAHs). Initial experiments were conducted on dry standard reference materials (SRMs) and field collected marine sediments. Moisture content in samples greatly influenced the recovery of the analytes of interest. When wet sediments were included in a sample batch, low recoveries were often encountered in other samples in the batch, including the dry SRM. Experiments were conducted to test the effect of standardizing the moisture content in all samples in a batch prior to extraction. SRM1941a (marine sediment). SRM1974a (mussel tissue), as well as QA96SED6 (marine sediment), and QA96TIS7 (marine tissue), both from 1996 NIST Intercalibration Exercise were extracted using microwave and conventional methods. Moisture levels were adjusted in SRMs to match those of marine sediment and tissue samples before microwave extraction. The results demonstrated that it is crucial to standardize the moisture content in all samples, including dry reference material to ensure good recovery of organic contaminants. MSE yielded equivalent or superior recoveries compared to conventional methods for the majority of the compounds evaluated. The advantages of MSE over conventional methods are reduced solvent usage, higher sample throughput and the elimination of halogenated solvent usage.     

Whole cell hybridisation for monitoring harmful marine microalgae

Fluorescence in situ hybridisation (FISH) is a powerful molecular biological tool to detect and enumerate harmful microorganism in the marine environment. Different FISH methods are available, and especially in combination with automated counting techniques, the potential for a routine monitoring of harmful marine microalgae is attainable. Various oligonucleotide probes are developed for detecting harmful microalgae. However, FISH-based methods are not yet regularly included in monitoring programmes tracking the presence of harmful marine microalgae. A limitation factor of the FISH technique is the currently available number of suited fluorochromes attached to the FISH probes to detect various harmful species in one environmental sample at a time. However, coupled automated techniques, like flow cytometry or solid-phase cytometry, can facilitate the analysis of numerous field samples and help to overcome this drawback. A great benefit of FISH in contrast to other molecular biological detection methods for harmful marine microalgae is the direct visualisation of the hybridised target cells, which are not permitted in cell free formats, like DNA depending analysis methods. Therefore, an additional validation of the FISH-generated results is simultaneously given.     

Tillage, crop rotation, and organic amendment effect on changes in soil organic matter

Carbon sequestration in agricultural soils is controlled by the balance of added organic residues and microbial oxidation of both residues and native organic matter (OM) as moderated by management and tillage. The PC-based model CQESTR predicts decomposition of residues, organic amendments and soil OM, based on cropping practices. CQESTR uses RUSLE (Revised Universal Soil Loss Equation) crop rotation and management practice, crop production, and operation databases. These data are supplemented with residue nitrogen and soil OM, bulk density, and layer thickness. CQESTR was calibrated with soil carbon data from 70-year-long experiments at the Research Center at Pendleton, OR. The calibrated model provides estimates with a 95% confidence interval of 0.33% OM. Validation at 11 independent sites resulted in a matching of observed with calculated OM with a 95% confidence interval of 0.55% OM. A 12th site, with a history of severe erosion, provided a poor match.     

Biological activity in metal-contaminated calcareous agricultural soils: the role of the organic matter composition and the particle size distribution

Organic matter (OM) plays a key role in microbial response to soil metal contamination, yet little is known about how the composition of the OM affects this response in Mediterranean calcareous agricultural soils. A set of Mediterranean soils, with different contents and compositions of OM and carbonate and fine mineral fractions, was spiked with a mixture of Cd, Cu, Pb, and Zn and incubated for 12 months for aging. Microbial (Biolog Ecoplates) and enzyme activities (dehydrogenase, DHA; β-galactosidase, BGAL; phosphatase, PHOS; and urease, URE) were assessed and related to metal availability and soil physicochemical parameters. All enzyme activities decreased significantly with metal contamination: 36–68 % (DHA), 24–85 % (BGAL), 22–72 % (PHOS), and 14–84 % (URE) inhibitions. Similarly, catabolic activity was negatively affected, especially phenol catabolism (～86 % compared to 25–55 % inhibition for the rest of the substrates). Catabolic and DHA activities were negatively correlated with ethylenediaminetetraacetic acid (EDTA)-extractable Cd and Pb, but positively with CaCl₂, NaNO₃, and DTPA-extractable Cu and Zn. Soluble OM (water- and hot-water-soluble organic C) was positively related to enzyme and catabolic activities. Recalcitrant OM and fine mineral fractions were positively related to BGAL and PHOS. Conversely, catabolic activity was negatively related to clay and positively to silt and labile OM. Results indicate that the microbial response to metal contamination is highly affected by texture and OM composition.     

A statistical approach applied to trace metal data from biomonitoring studies

This work underlines the importance of the statistical procedures necessary for the significant assessment of analytical data of heavy metals derived from marine organisms (biomonitors) collected at five stations in Ustica at the Southern Tyrrhenian Sea. The statistical method described indicates that, where the differences among the averages of Pb, Cu and Zn concentrations in the molluscs of the sites analysed tested with ANOVA are significant, it is necessary to conduct multiple comparison tests in order to determine which average is significantly different from the other. Using the method described, it is possible to indicate which site or sites is/are more contaminated in comparison with the other sites. This way it is possible to make a preliminary evaluation of the basal levels of trace metals present in the reference marine ecosystem under study.     

Imposex occurrence in marine whelks at a military facility in the high Arctic

Imposex was found in the Arctic whelk Buccinum finmarkianum at several marine stations off Thule Air Base, an US military facility in Northwest Greenland. This indicates a widespread contamination with the antifouling agents, tributyltin (TBT) or triphenyltin (TPhT) in the area, but such contamination was not supported by the organotin analyses in sediments, whelks and clams, which in general was below the analytical detection limit. Organotin concentrations above the detection limit were found only at one station close to a quay, where the highest frequency of imposex also occurred. This suggests that imposex in B. finmarkianum is a biomarker of TBT more sensitive than the detection limits, which the analytical chemistry could achieve in this study.     

Organic chlorine compounds in lake sediments. V. Bottom of Baikal near a pulp mill

Organically bound chlorine (OCl) together with inorganic chloride (Cl⁻) was measured from bottom surface samples of the Lake Baikal near a pulp mill and compared to organic matter contents (OM). Although total contents of OCl, Cl⁻ and OM were much lower than, the ratio of OCl to OM was of the same order of magnitude as in pulp mill recipients of Finland.     

Effect of soil amendments on sorption and mobility of metribuzin in soils

Metribuzin (4-amino-6-tert-butyl-4,5-dihydro-3-methylthio-1,2,4-triazin-5-one), is weakly sorbed to soil therefore, leaches easily to lower soil profiles. Soil amendments play a significant role in the management of leaching losses of pesticides. Therefore, present study reports the effect of organic manure and fly ash amendments on metribuzin downward mobility in sandy loam soil columns. Application of animal manure [T-1(OM) and T-2(OM)] and fly ash [T-1(FA) and T-2(FA)] at 2.5% and 5.0% levels increased the metribuzin retention in the soil. Freundlich constant [K(f)(1/n)] values of metribuzin for treatments T-1(OM) and T-2(OM) were 0.70 and 1.11, respectively, which were significantly higher than the value (0.27) in natural soil (T-0). The respective values for treatments T-1(FA) and T-2(FA) were 1.80 and 4.61. Downward mobility of metribuzin was studied in packed soil columns [300 mm (l)x59 mm (i.d.)]. Both the amendments significantly reduced the downward mobility of metribuzin and affected breakthrough time and maximum concentration of metribuzin in the leachate. Leaching losses of metribuzin were decreased from 97% in natural soil (T-0) column to 64% [T-1(OM)] and 42% [T-2(OM)] for animal manure-amended columns and 26% [T-1(FA)] to 100% [T-2(FA)] for fly ash-amended columns, as metribuzin did not leach out of 5% fly ash-amended column. Study indicates that both animal manure and fly ash were quite effective in reducing the downward mobility of metribuzin in packed soil columns of a sandy loam soil.