Removal of organic and nitrogen and molecular weight distribution of residual soluble organic from entrapped mixed microbial cells and activated sludge processes.

The simultaneous removal of organic and nitrogen and molecular weight distribution (MWD) of residual soluble chemical oxygen demand (RSCOD) in final effluent were investigated using entrapped mixed microbial cells (EMMC) and conventional activated sludge processes. Two different types of processes using EMMC carriers demonstrated better organic and nitrogen removal performance because of the high solids retention time (SRT) compared with the activated sludge process. Regarding the RSCOD, the longer SRT process (EMMC) was affected by reducing the hydraulic retention time, resulting in the increase of high-molecular-weight materials. On the other hand, reducing the aeration period had significantly affected the MWD in the shorter SRT process (activated sludge), resulting in an increase of low-molecular-weight materials.     

膜-生物反应器中溶解性微生物产物的研究进展

本文就膜 -生物反应器中溶解性微生物产物的生成特性及其影响的研究进展进行了总结。在膜 -生物反应器中 ,膜的高效固液分离作用在提高系统容积负荷和出水水质的同时 ,也使生物反应器成为一个相对封闭的系统。以腐殖质、多糖、蛋白质等物质为主要成分的溶解性微生物产物是生物处理出水中溶解性TOC或COD的主要组成部分 ,主要产生于微生物的基质分解过程和内源呼吸过程 ,其高分子物质的含量较多且可生物降解性较差 ,因此 ,在膜 -生物反应器中会出现积累。溶解性微生物产物的过高积累不仅有可能降低膜过滤出水的水质稳定性 ,而且有可能影响污泥活性 ,并引起膜污染。进水浓度和污泥浓度是影响溶解性微生物产物产生量的重要因素。目前有关膜 -生物反应器中溶解性微生物产物的研究还很不完善 ,有很多问题需进一步研究     

Advanced oxidation of a pulp mill bleaching wastewater.

The degradation, by several advanced oxidation reactions, of a pulp mill ECF bleaching effluent, was studied. The initial biodegradability of the organic matter present in the effluent, estimated as the BOD5/COD, was low (0.3). When the effluent was submitted to ozonation and to five different advanced oxidation systems (O3/UV, O3/UV/ZnO, O3/UV/TiO2, O2/UV/ZnO, O2/UV/TiO2), the biodegradability increase significantly. After five minutes of reaction, the O3/UV system appears as the most efficient in to transform the organic matter to more biodegradable forms. A similar effect was observed when the effluent was submitted to an activated sludge treatment. The COD, TOC and toxicity reduction correlated well with the biodegradability enhancement after AOPs treatments.     

Biological solids reduction using the Cannibal process.

A laboratory study of the Cannibal process was undertaken to determine if the Cannibal system would generate less sludge compared with a conventional activated sludge system. Side-by-side sequencing batch reactors were operated--one using the Cannibal configuration and the other as conventional activated sludge. It was found that the Cannibal process generated 60% less solids than the conventional activated sludge system, without any negative effect on the effluent quality or the settling characteristics of the activated sludge. The oxygen uptake rate for the centrate from the Cannibal bioreactor showed that readily biodegradable organic matter was released from the recycled biomass in the Cannibal bioreactor. It is proposed that the mechanism for reduced solids from the Cannibal system is that, in the Cannibal bioreactor, iron is reduced, releasing iron-bound organic material into solution. When the Cannibal biomass is recirculated back to the aeration basin, the released organic material is rapidly degraded.     

Diffusion of oxygen through activated sludge flocs: experimental measurement, modeling, and implications for simultaneous nitrification and denitrification.

Diffusion of dissolved oxygen through activated sludge flocs was studied, as it represents a potential mechanism for simultaneous nitrification and denitrification in activated sludge systems. Dissolved oxygen profiles through six floc particles collected at different times from a full-scale activated sludge plant demonstrated that that the dissolved oxygen concentration declines through all floc particles. For larger floc particles (2-mm diameter and greater), the dissolved oxygen concentration reached near-zero values at depths depending on process operating conditions. A mathematical model based on diffusion of dissolved oxygen, organic substrate (methanol), ammonia, nitrite, and nitrate through a spherical floc and consumption of dissolved oxygen by heterotrophs and autotrophs accurately predicted the dissolved oxygen profile and required adjustment of only one model parameter--the concentration of heterotrophs. A different dissolved oxygen decline pattern was exhibited for the smaller floc particles characterized, with the dissolved oxygen reaching a non-zero plateau toward the center of the floc. This pattern was not reproduced with the mathematical model developed and suggests that additional mechanisms are responsible for the transport of dissolved oxygen into the center of these flocs. Implications of these results regarding the occurrence of simultaneous nitrification and denitrification include consideration of the factors that affect floc size and distribution (simultaneous nitrification and denitrification is maximized with larger floc particles), coupling of the International Water Association (London) activated models to predict activated sludge composition with diffusion models to consider intrafloc effects, and the effects of substrate diffusion on the apparent half-saturation constant for various substrates in activated sludge systems.     

Improving nitrogen removal in two modified decentralized wastewater systems

Efficient nutrient removal in decentralized wastewater treatment systems is a challenging task. To improve the removal of organic matter and nitrogen from wastewater, two types of bioreactors using membrane-aerated biofilm reactor (MABR) and microbial fuel cell (MFC) techniques were evaluated. During more than 250 days of continuous-flow reactor operation, both reactors showed consistently high chemical oxygen demand removal (>86%). At an influent ammonium-nitrogen (NH4(+)-N) concentration of 30 mg N/L, the average effluent NH4(+)-N concentrations were 6.2 and 0.5 mg N/L for the MABR and MFC reactor, respectively, while the effluent nitrate-nitrogen (NO3(-)-N) concentrations were 5.4 mg/ L in the MABR and 19.2 mg/L in the MFC-based reactor. The overall total inorganic nitrogen removal efficiencies were 64% and 36% for the MABR and MFC reactor, respectively. At the measured dissolved oxygen concentrations of 5.2 and 0.23 mg/L in the aerobic/anoxic zone of the MFC and MABR, respectively, a specific oxygen uptake rate of 0.1 g O2/g VSS-d, resulting from ammonia oxidation, was detected in the settled sludge of the MFC, while no nitrifying activity of the sludge from the MABR was detected. Molecular microbial analysis demonstrated a link between the bacterial community structure and nitrifying activity. The relatively high abundance of Nitrosomonas europaea was associated with its detectable nitrification activity in the settled sludge of the MFC. The results suggest that MABR and MFC techniques have the potential to improve organic and nitrogen removal in decentralized wastewater systems.     

低温下ZCS工艺和改进式ZCS工艺脱氮效率研究及微生物特性分析

考察冬季低温下沸石联合生物吸附再生工艺和改进式沸石联合生物吸附再生工艺对城市污水的脱氮效率,结果表明在HRT为3.5 h下,ZCS工艺出水氨氮为11.65 mg/L,总氮高于20 mg/L.而相同条件下MZCS工艺氨氮出水为5.45 mg/L,总氮去除率比原ZCS工艺提高了11%,均值为16.8 mg/L.通过聚合酶链式技术,变性梯度凝胶电泳和电镜扫描技术发现两工艺微生物多样性、丰度高于传统活性污泥法,兼具活性污泥法和生物膜法的微生物特性.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

一体化间歇曝气完全混合活性污泥法

一体化间歇曝气完全混合活性污泥法处理装置采取特殊的沉淀区构造,改变了活性污泥的循环流动方式,通过间歇曝气,反应区交替处于好氧/缺氧状态,达到了有机物高效去除、高效硝化反硝化及控制污泥膨胀的效果.该方法具有出水水质好、运行稳定、能耗低、流程简洁和操作管理方便的特点,是一种很有发展潜力的一体化中小型生活污水、城市污水处理系统.     

Effect of pH and the role of organic matter in the adsorption of isoproturon on soils

Equilibrium measurements were carried out with the herbicide isoproturon on natural adsorbents (brown forest-, chernozem-, sandy soils and quartz) in different buffered media (pH 5, 7, 8 phosphate buffer). Adsorption isotherms were fitted by a multi-step adsorption equation providing numerical information used in the environmental propagation models and risk assessment works. In the adsorption of the slightly polar isoproturon the dissolved organic matter of the soil and the pH play an important role. At molecular level, results are interpreted by taking into consideration the hydrophobic interaction and the formation of hydrogen bonds between the surface and the solute. The observed adsorption behavior indicates that the organic matter content of the soils and its soluble fulvic acid, alkaline soluble humic acid and insoluble humin fractions were considerable different. The chernozem soil containing the highest amount of insoluble organic fraction proved to be a very efficient adsorbent. The brown forest and the sandy soils exhibit rather similar adsorbent properties but at pH 7 the latter containing more fulvic acid adsorbs less isoproturon due to the enhanced solubility of the soil organic matter. In alkaline conditions the negatively charged solute and the surface repel each other and the hydrophobic interactions are also weaker than in neutral media.     

Improved computational model (AQUIFAS) for activated sludge, integrated fixed-film activated sludge, and moving-bed biofilm reactor systems, part III: analysis and verification

Research was undertaken to analyze and verify a model that can be applied to activated sludge, integrated fixed-film activated sludge (IFAS), and moving-bed biofilm reactor (MBBR) systems. The model embeds a biofilm model into a multicell activated sludge model. The advantage of such a model is that it eliminates the need to run separate computations for a plant being retrofitted from activated sludge to IFAS or MBBR. The biofilm flux rates for organics, nutrients, and biomass can be computed by two methods-a semi-empirical model of the biofilm that is relatively simpler, or a diffusional model of the biofilm that is computationally intensive. Biofilm support media can be incorporated to the anoxic and aerobic cells, but not the anaerobic cells. The model can be run for steady-state and dynamic simulations. The model was able to predict the changes in nitrification and denitrification at both pilot- and full-scale facilities. The semi-empirical and diffusional models of the biofilm were both used to evaluate the biofilm flux rates for media at different locations. The biofilm diffusional model was used to compute the biofilm thickness and growth, substrate concentrations, volatile suspended solids (VSS) concentration, and fraction of nitrifiers in each layer inside the biofilm. Following calibration, both models provided similar effluent results for reactor mixed liquor VSS and mixed liquor suspended solids and for the effluent organics, nitrogen forms, and phosphorus concentrations. While the semi-empirical model was quicker to run, the diffusional model provided additional information on biofilm thickness, quantity of growth in the biofilm, and substrate profiles inside the biofilm.     

Co-treatment of acid mine drainage with municipal wastewater: performance evaluation

Co-treatment of acid mine drainage (AMD) with municipal wastewater (MWW) using the activated sludge process is a novel treatment technology offering potential savings over alternative systems in materials, proprietary chemicals and energy inputs. The impacts of AMD on laboratory-scale activated sludge units (plug-flow and sequencing batch reactors) treating synthetic MWW were investigated. Synthetic AMD containing Al, Cu, Fe, Mn, Pb, Zn and SO₄ at a range of concentrations and pH values was formulated to simulate three possible co-treatment processes, i.e., (1) adding raw AMD to the activated sludge aeration tank, (2) pre-treating AMD prior to adding to the aeration tank by mixing with digested sludge and (3) pre-treating AMD by mixing with screened MWW. Continuous AMD loading to the activated sludge reactors during co-treatment did not cause a significant decrease in chemical oxygen demand (COD), 5-day biochemical oxygen demand, or total organic carbon removal; average COD removal rates ranged from 87–93 %. Enhanced phosphate removal was observed in reactors loaded with Fe- and Al-rich AMD, with final effluent TP concentrations <2 mg/L. Removal rates for dissolved Al, Cu, Fe and Pb were 52–84 %, 47–61 %, 74–86 % and 100 %, respectively, in both systems. Manganese and Zn removal were strongly linked to acidity; removal from net-acidic AMD was <10 % for both metals, whereas removal from circum-neutral AMD averaged 93–95 % for Mn and 58–90 % for Zn. Pre-mixing with screened MWW was the best process option in terms of AMD neutralization and metal removal. However, significant MWW alkalinity was consumed, suggesting an alkali supplement may be necessary.     

Use of extant kinetic parameters to predict effluent concentrations of specific organic compounds at full-scale facilities.

To use the results of kinetic tests to predict effluent concentrations of specific contaminants in activated sludge systems, the fraction of the biomass that has an ability to degrade the test compound (i.e., competent biomass) must be estimated. A calibration procedure was developed to assess the competent biomass concentration because the chemical oxygen demand (COD) fraction tended to underestimate the degrading fraction for three of the four test compounds. Acetone, for instance, had a measured influent COD fraction of 0.08%, and the actual competent fraction was estimated to be 2.3%, based on the model calibration. Once the competent biomass fraction in the mixed liquor was determined, the extant kinetic parameters were subsequently used to predict activated sludge system performance. Predicted effluent concentrations were within 2, 5, and 16% of the average measured concentrations for acetone, linear alkylbenzene sulfonate, and furfural, respectively. Day-to-day predictions for these compounds were less accurate, possibly because of the non-steady-state nature of the activated sludge systems studied. The difference between the fraction of the influent COD contributed by the target compounds and the competent biomass fraction in the mixed liquor was found to be more significant when the target compound contributed less than 1% of the influent organic matter. The chemical structure of the target compound and chemical composition of the influent likely had an effect on the resulting competent biomass concentration. The total maximum growth rate, microX, was observed to be independent of the influent concentration of acetone and furfural, thus suggesting that the competent biomass concentration for these compounds was not affected by the changes in their influent concentrations. Consequently, a majority of competent biomass growth resulted from the degradation of other substrates, resulting in a competent biomass concentration significantly higher than predicted based on the influent COD fraction contributed by the test compound.     

The partitioning of alkylphenolic surfactants and polybrominated diphenyl ether flame retardants in activated sludge batch tests

Polybrominated diphenyl ethers and nonylphenol polyethoxylates have been reported to be estrogenic and may enter the aquatic environment through the discharge of treated sewage effluent. Therefore, their fate during wastewater treatment processes is an important factor in determining their environmental impact. Batch tests with activated sludge from a Husmann apparatus were used to determine the effects of physico-chemical properties and sludge characteristics on the partitioning of polybrominated diphenyl ether flame retardants and nonylphenol polyethoxylate surfactants during biological wastewater treatment. Hydrophobic compounds, those with high logK(ow) values, were sorbed more rapidly and to a greater extent to the solid phase than more soluble compounds. For these hydrophobic compounds sorption may become an increasingly important removal mechanism as sludge age and therefore solids content increase. The initial rate of partitioning was greatest for the most hydrophobic compounds but all rates diminished with time as a result of progressive saturation of sorbent binding sites, a reduction of sorbate availability and as a consequence of the system reaching equilibrium. The sorption of polybrominated diphenyl ethers fit Freundlich adsorption isotherms demonstrating generally increasing adsorption capacity and efficiency with increasing hydrophobic nature. A correlation between increasing logK(ow) and increasing organic matter content was also observed for both polybrominated diphenyl ethers and nonylphenol polyethoxylates indicating the organic content of mixed liquor will also be influential in removing compounds during wastewater treatment.     

Oxidation-reduction potential changes in aeration tanks and microprofiles of activated sludge floc in medium- and low-strength wastewaters.

Real-time control of aeration tank operation is key to high-efficiency pollutant removal and energy savings. One of the aims of this study was to examine the potential for using redox potential (oxidation-reduction potential [ORP]) to indicate wastewater quality online in aeration tanks treating medium (chemical oxygen demand [COD] of 70 to 150 mg/L) and low (COD of 15 to 30 mg/L) pollutant-concentration wastewaters. The field-scale data provide a good relationship between ORP values and nutrient removal along the length of the aeration tanks. The ORP values increased dramatically as organic matter was removed along the aeration tanks, indicating the improvement of the bulk liquor redox status. Dissolved oxygen higher than 1.0 mg/L was necessary for good biodegradation and improvement of the liquid redox status. Nitrification occurred at higher ORP values (380 to 420 mV) than was the case for organic substrate oxidation (250 to 300 mV). The microprofiles obtained from microelectrode measurements substantiate the heterogeneity of the microbial processes inside activated sludge flocs. Because of microbial oxygen utilization, the aerobic region in the activated sludge floc was limited to the top layer (0.1 to 0.2 mm) of the activated sludge aggregate present in medium-strength wastewater, with an anoxic zone dominating inside the flocs. When dissolved oxygen in the bulk water was higher than 4.0 mg/L, the anoxic zone inside the floc disappeared. At low wastewater pollutant concentrations, the ORP and dissolved oxygen inside the activated sludge aggregates were higher than those from medium-strength wastewater. The prospect of using ORP as an online control approach for aeration tank operation and the potential reasons for activated sludge floc size varying with pollutant strengths are also discussed.     

A comparison of the physical, chemical, and biological properties of sludges from a complete-mix activated sludge reactor and a submerged membrane bioreactor.

The properties of sludges from a pilot-scale submerged membrane bioreactor (SMBR) and two bench-scale complete-mix, activated sludge (CMAS) reactors treating municipal primary effluent were determined. Compared with the CMAS sludges, the SMBR sludge contained a higher amount of soluble microbial products (SMP) and colloidal material attributed to the use of a membrane for solid-liquid separation; a higher amount nocardioform bacteria, resulting from efficient foam trapping; and a lower amount of extracellular polymeric substances (EPS), possibly because there was no selective pressure for the sludge to settle. High aeration rates in both the CMAS and SMBR reactors produced sludges with higher numbers of smaller particles. Normalized capillary suction time values for the SMBR sludge were lower than for the CMAS sludges, possibly because of its lower EPS content.     

Fate of Terpene Compounds in Activated Sludge Wastewater Treatment Systems

ABSTRACT

Terpene-based cleaners are being widely used in industrial cleaning formulations because of their ability to replace suspected ozone-depleting chemicals such as 1,1,1-trichloroethane and 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113). Substitution of chlorinated solvents with ter-pene-based cleaners, however, is expected to result in increased discharges to wastewater from industrial operations. A pilot-scale study was conducted at the U.S. Environmental Protection Agency's (EPA) Test & Evaluation Facility in Cincinnati, OH, to quantify the fate of specific terpene compounds in the activated sludge wastewater treatment process. Biodegradation rates of terpenes were estimated from the difference between the influent terpene mass flow rates and the amounts volatilized to air, partitioned to waste sludge, and passed through the treatment process unchanged. Any chemical transformation of the terpene compounds studied was attributed to biodegradation.

Analytical methods were developed to determine ter-pene concentrations in aqueous and gaseous media. The fate of two common terpene compounds (d-limonene and terpinolene) were evaluated in three identical pilot-scale systems: (1) a system with a high target spike range (2–10 mg/L), (2) a system with a low target spike range (0.5–2 mg/L), and (3) a control system (no spike).

The study showed that the primary removal mechanism for the terpene compounds in the activated sludge process is biodegradation. Typically, greater than 90% of the mass of terpenes entering the aeration basin of the activated sludge process biodegrades to other compounds; volatilization from the reaction basin accounts for less than 10%, while loss to waste activated sludge and the secondary clarifier effluent accounts for less than 1%.     

Microbial regeneration of spent activated carbon dispersed with organic contaminants: mechanism, efficiency, and kinetic models

Background and purpose

Regeneration of spent activated carbon assumes paramount importance in view of its economic reuse during adsorptive removal of organic contaminants. Classical thermal, chemical, or electrochemical regeneration methods are constrained with several limitations. Microbial regeneration of spent activated carbon provides a synergic combination of adsorption and biodegradation.

Methods

Microorganisms regenerate the surface of activated carbon using sorbed organic substrate as a source of food and energy. Aromatic hydrocarbons, particularly phenols, including their chlorinated derivatives and industrial waste water containing synthetic organic compounds and explosives-contaminated ground water are the major removal targets in adsorption?Cbioregeneration process. Popular mechanisms of bioregeneration include exoenzymatic hypothesis and biodegradation following desorption. Efficiency of bioregeneration can be quantified using direct determination of the substrate content on the adsorbent, the indirect measurement of substrate consumption by measuring the carbon dioxide production and the measurement of oxygen uptake. Modeling of bioregeneration involves the kinetics of adsorption/desorption and microbial growth followed by solute degradation. Some modeling aspects based on various simplifying assumptions for mass transport resistance, microbial kinetics and biofilm thickness, are briefly exposed.

Results

Kinetic parameters from various representative bioregeneration models and their solution procedure are briefly summarized. The models would be useful in predicting the mass transfer driving forces, microbial growth, substrate degradation as well as the extent of bioregeneration.

Conclusions

Intraparticle mass transfer resistance, incomplete regeneration, and microbial fouling are some of the problems needed to be addressed adequately. A detailed techno-economic evaluation is also required to assess the commercial aspects of bioregeneration.     

An activated sludge process to reduce the pollution load of a dye-industry waste

A laboratory-scale activated sludge process was developed to reduce the pollution load of a dye-industry waste, containing aniline, phenol, methyl violet and rhodamine B as its major components. The waste exerted an organic load of 5576 mg litre(-1) as the chemical oxygen demand (COD), of 896 mg litre(-1) as total organic carbon (TOC), and had a 31.5 mg litre(-1) phenol content. A microbial sludge, capable of growing on the waste, was developed from cattle dung, adapted to the waste and used as a bioinoculum for the process. This resulted in reductions of 60% in COD, 37% in TOC, and 92% in phenol content, and a decrease in optical density of the colour of the waste from an initial 0.915 to 0.360 at 580 nm. Microorganisms isolated from sludge were identified as Pseudomonas alcaligenes and P. mendocina.     

废水生物处理出水中溶解性微生物产物的形成机制与特征

废水生物处理出水中的溶解性微生物产物(SMP)主要产生于基质降解和微生物的内源呼吸过程,它的存在是影响生物处理出水水质和有机物去除率的一个重要因素,已引起人们的普遍关注.简单阐述了SMP的定义,详细探讨了废水生物处理出水中溶解性微生物产物的形成机制与特征.