Individual and mixture toxicity of three pesticides; atrazine,chlorpyrifos, and chlorothalonil to the marine phytoplankton species Dunaliella tertiolecta

This study analyzed the toxicity of three pesticides (the herbicide atrazine, the insecticide chlorpyrifos and the fungicide chlorothalonil) individually, and in two mixtures (atrazine and chlorpyrifos; atrazine and chlorothalonil) to the marine phytoplankton species Dunaliella tertiolecta (Chlorophyta). A standard 96 h static algal bioassay was used to determine pesticide effects on the population growth rate of D. tertiolecta. Mixture toxicity was assessed using the additive index approach. Atrazine and chlorothalonil concentrations > or = 25 microg/L and 33.3 microg/L, respectively, caused significant decreases in D. tertiolecta population growth rate. At much higher concentrations (> or = 400 microg/L) chlorpyrifos also elicited a significant effect on D. tertiolecta population growth rate, but toxicity would not be expected at typical environmental concentrations. The population growth rate EC50 values determined for D. tertiolecta were 64 microg/L for chlorothalonil, 69 microg/L for atrazine, and 769 microg/L for chlorpyrifos. Atrazine and chlorpyrifos in mixture displayed additive toxicity, whereas atrazine and chlorothalonil in mixture had a synergistic effect. The toxicity of atrazine and chlorothalonil combined was approximately 2 times greater than that of the individual chemicals. Therefore, decreases in phytoplankton populations resulting from pesticide exposure could occur at lower than expected concentrations in aquatic systems where atrazine and chlorothalonil are present in mixture. Detrimental effects on phytoplankton population growth rate could impact nutrient cycling rates and food availability to higher trophic levels. Characterizing the toxicity of chemical mixtures likely to be encountered in the environment may benefit the pesticide registration and regulation process.     

Mixture toxicity of the antifouling compound irgarol to the marine phytoplankton species Dunaliella tertiolecta

This study examined the toxicity of irgarol, individually and in binary mixtures with three other pesticides (the fungicide chlorothalonil, and the herbicides atrazine and 2,4-D), to the marine phytoplankton species Dunaliella tertiolecta. Standard 96-h static algal bioassays were used to determine pesticide effects on population growth rate. Irgarol significantly inhibited D. tertiolecta growth rate at concentrations > or = 0.27 micro g/L. Irgarol was significantly more toxic to D. tertiolecta than the other pesticides tested (irgarol 96 h EC50 = 0.7 micro g/L; chlorothalonil 96 h EC50 = 64 micro g/L; atrazine 96 h EC50 = 69 micro g/L; 2,4-D 96 h EC50 = 45,000 micro g/L). Irgarol in mixture with chlorothalonil exhibited synergistic toxicity to D. tertiolecta, with the mixture being approximately 1.5 times more toxic than the individual compounds. Irgarol and atrazine, both triazine herbicides, were additive in mixture. The toxicity threshold of 2,4-D was much greater than typical environmental levels and would not be expected to influence irgarol toxicity. Based on these interactions, overlap of certain pesticide applications in the coastal zone may increase the toxicological risk to resident phytoplankton populations.     

Optimal growth of Dunaliella primolecta in axenic conditions to assay herbicides

To develop an assay for herbicides in marine environments using microalgae, we have optimized the specie, cell culture media and physical conditions to obtain maximal cellular densities in a 96 well micro format to allow mass assays. We first surveyed several species of 7 unicellular eukaryotic algae genera (Dunaliella, Tetraselmis, Chlorella, Ellipsoidon, Isochrysis, Nannochloropsis, and Phaeodactylum) for vigorous in vitro axenic growth. Once the genus Dunaliella was selected, Dunaliella primolecta was preferred among 9 species (bioculata, minuta, parva, peircei, polymorpha, primolecta, quartolecta, salina and tertiolecta) because it showed the highest growth rates. The components (oligo elements, sugars, amino acids and vitamins) and conditions (light, CO(2), temperature) of the culture media were further optimized to obtain the highest cellular densities (up to 60x10(6)cellsml(-1)) and the shortest cell cycle duration ( approximately 12h) for D. primolecta. Then the toxicity of four representative herbicides, alloxydim, and sethoxydim (inhibitors of acetyl-coA carboxilase), metamitron (inhibitor of photosynthesis) and clopyralid (inhibitor of respiration), were assayed on the optimal culture conditions for D. primolecta during 96h. The results showed that D. primolecta was susceptible to those herbicides in the following order: metamitron > sethoxydim > alloxydim. In contrast, clopyralid did not have any effects. Therefore, D. primolecta microcultures can be used to assay a large number of samples for the presence of herbicides under a saline environment.     

Vegetable and synthetic tannins induce hormesis/toxicity in sea urchin early development and in algal growth

Mimosa tannin and phenol-based synthetic tannin (syntan) were tested for toxicity to sea urchin (Paracentrotus lividus and Sphaerechinus granularis) early development and to marine algal growth (Dunaliella tertiolecta). Sea urchin embryogenesis was affected by vegetable tannin and syntan water extracts (VTWE and STWE) at levels >or=1mg/L. Developmental defects were significantly decreased at VTWE and STWE levels of 0.1 and 0.3mg/L when control cultures displayed suboptimal quality, i.e. <70% "viable" (normal or retarded) larvae. Fertilization success of sea urchin sperm was increased up to 0.3 mg/L STWE or VTWE, then was inhibited by increasing tannin levels (1-30 mg/L). Offspring abnormalities, following sperm exposure to VTWE or STWE, showed the same shift from hormesis to toxicity. Cell growth bioassays in D. tertiolecta exposed to VTWE or STWE (0.1-30 mg/L) showed non-linear concentration-related toxicity. Novel criteria are suggested in defining control quality that should reveal hormetic effects.     

Efficacy and toxicity of self-polishing biocide-free antifouling paints

The ban on harmful substances in antifouling paints requires the development of new antifouling strategies. Alternatives should be as effective as conventional paints but of lower toxicity. In the present study two commercially available, self-polishing antifouling paints were examined in order to get information on their antifouling properties and toxicological potential. Efficacy was shown in settlement assays with the marine barnacle species Balanus amphitrite, however, efficacy was related to toxic effects observed on target and non-target organisms. Toxicity of the paint extracts was concentration-dependent and differed according to the paint and the species investigated. Toxicity could at least partially be attributed to zinc leached from the paints. Effects of a water-soluble paint were more pronounced in larvae of B. amphitrite, Artemia salina and in the green algae Dunaliella tertiolecta. Embryos of the freshwater species Danio rerio and Vibrio fisheri were more affected by a paint based on organic solvents.     

Toxicity of fipronil and its enantiomers to marine and freshwater non-targets

Fipronil is a phenylpyrazole insecticide used in agricultural and domestic settings for controlling various insect pests in crops, lawns, and residential structures. Fipronil is chiral; however, it is released into the environment as a racemic mixture of two enantiomers. In this study, the acute toxicity of the (S,+) and (R,-) enantiomers and the racemic mixture of fipronil were assessed using Simulium vittatum IS-7 (black fly), Xenopus laevis (African clawed frog), Procambarus clarkii (crayfish), Palaemonetes pugio (grass shrimp), Mercenaria mercenaria (hardshell clam), and Dunaliella tertiolecta (phytoplankton). Results showed that S. vittatum IS-7 was the most sensitive freshwater species to the racemic mixture of fipronil (LC50 = 0.65 microg/L) while P. pugio was the most sensitive marine species (LC50 = 0.32 microg/L). Procambarus clarkii were significantly more sensitive to the (S,+) enantiomer while larval P. pugio were significantly more sensitive to the (R,-) enantiomer. Enantioselective toxicity was not observed in the other organisms tested. Increased mortality and minimal recovery was observed in all species tested for recovery from fipronil exposure. These results indicate that the most toxic isomer of fipronil is organism-specific and that enantioselective toxicity may be more common in crustaceans than in other aquatic organisms.     

Chemical composition and surfactant characteristics of marine foams investigated by means of UV-vis,FTIR and FTNIR spectroscopy

In this study, we collected the ultraviolet–visible (UV-vis), Fourier transform infrared (FTIR) and Fourier transform near-infrared (FTNIR) spectra of marine foams from different sites and foams produced by marine living organisms (i.e. algae and molluscs) to retrieve information about their molecular and structural composition. UV-vis spectra gave information concerning the lipid and pigment contents of foams. FTIR spectroscopy gave a more detailed qualitative information regarding carbohydrates, lipids and proteins in addition with information about the mineral contents of foams. FTNIR spectra confirmed the presence of carbohydrates, lipids and proteins in foams. Then, due to the higher content of structural information of FTIR spectroscopy with respect to FTNIR and UV-vis, we join the FTIR spectra of marine foams to those of humic substance from marine sediments and to the spectra of foams obtained by living organisms. We submitted this resulting FTIR spectral dataset to statistical multivariate methods to investigate specific aspects of foams such as structural similarity among foams and in addition, contributions from the organic matter of living organisms. Cluster analysis (CA) evidenced several cases (i.e. clusters) of marine foams having high structural similarity with foams from vegetal and animal samples and with humic substance extracted from sediments. These results suggested that all the living organisms of the marine environment can give contributions to the chemical composition of foams. Moreover, as CA also evidenced cases of structural differences within foam samples, we applied two-dimensional correlation analysis (2DCORR) to the FTIR spectra of marine foams to investigate the molecular characteristics which caused these structural differences. Asynchronous spectra of two-dimensional correlation analysis showed that the structural heterogeneity among foam samples depended reasonably on the presence and on the qualitative difference of electrostatic (hydrogen bonds) and nonpolar (van der Waals and π–π) interactions involving carbohydrate proteins and lipids present. The presence and relevance of these interactions agree with the supramolecular and surfactant characteristics of marine organic matter described in the scientific literature.     

Green synthesis of gold nanoparticles using fungus <Emphasis Type="Italic">Mariannaea</Emphasis> sp. HJ and their catalysis in reduction of 4-nitrophenol

In the present study, biosynthesis of gold nanoparticles (AuNPs) by the cells (cells-AuNPs) and cell-free extracts (extracts-AuNPs) of a new fungus Mariannaea sp. HJ was reported. The as-synthesized particles were characterized by UV-vis spectroscopy, transmission electron microscopy (TEM), X-ray diffraction (XRD), and Fourier transform infrared spectroscopy (FTIR). The effects of different parameters on AuNP biosynthesis were investigated, and initial gold ion concentration of 2 mM, pH 7, was demonstrated to be suitable for both cells-AuNP and extracts-AuNP syntheses. The cells-AuNPs were of various shapes, including sphere, hexagon, and irregular shapes, with an average size of 37.4 nm, while the extracts-AuNPs were almost spherical and pseudo-spherical with an average size of 11.7 nm. XRD pattern suggested that the crystal structure of both AuNPs was face-centered cubic. FTIR spectra implied that some biomolecules from the fungal cell walls or cell-free extracts were involved in the formation of AuNPs. The as-synthesized AuNPs were demonstrated to have excellent catalytic activities for the reduction of 4-nitrophenol with the catalytic rate constants of 5.7 × 10^?3/s for cells-AuNPs and 24.7 × 10^?3/s for extracts-AuNPs. To the best of our knowledge, this is the first report on AuNP biosynthesis by Mariannaea sp.     

Spectroscopic characterization of water extractable organic matter during composting of municipal solid waste

This paper aims to characterize the evolution of water extractable organic matter (WEOM) during the composting of municipal solid waste (MSW), and investigate the correlation between maturity and WEOM characteristics. WEOM was extracted at different stages of MSW composting (0, 7, 14, 21, and 51 d) and characterized by FTIR, UV-Vis, and fluorescence spectroscopy. The results obtained show that the composting process decreased aliphatics, alcohols, polysaccharides, as well as protein-like materials, and increased aromatic polycondensation, humification, oxygen-containing functional groups, molecular weight, and humic-like materials. The maturity of MSW during composting was characterized by the presence of the peak with an excitation/emission wavelength pair of 289/421 nm in excitation-emission matrix spectra.     

Interaction of bisphenol A with dissolved organic matter in extractive and adsorptive removal processes

The fate of endocrine disrupting chemicals (EDCs) in natural and engineered systems is complicated due to their interactions with various water constituents. This study investigated the interaction of bisphenol A (BPA) with dissolved organic matter (DOM) and colloids present in surface water and secondary effluent as well as its adsorptive removal by powdered activated carbons. The solid phase micro-extraction (SPME) method followed by thermal desorption and gas chromatography-mass spectrometry (GC-MS) was utilized for determining the distribution of BPA molecules in water. The BPA removal by SPME decreased with the increased DOM content, where the formation of BPA-DOM complexes in an aqueous matrix was responsible for the reduced extraction of BPA. Colloidal particles in water samples sorbed BPA leading to the marked reduction of liquid phase BPA. BPA-DOM complexes had a negative impact on the adsorptive removal of BPA by powered activated carbons. The complex formation was characterized based on Fourier transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectroscopy, along with the calculation of molecular interactions between BPA and functional groups in DOM. It was found that the hydrogen bonding between DOM and BPA would be preferred over aromatic interactions. A pseudo-equilibrium molecular coordination model for the complexation between a BPA molecule and a hydroxyl group of the DOM was developed, which enabled estimation of the maximum sorption site and complex formation constant as well as prediction of organic complexes at various DOM levels.     

Comprehensive characterization of oil refinery effluent-derived humic substances using various spectroscopic approaches

Refinery effluent-derived humic substances (HS) are important for developing refinery effluent reclamation techniques and studying the environmental chemistry of wastewater effluents. In this study, dissolved organic matter (DOM) from refinery effluent was concentrated using a portable reverse osmosis (RO) system. HS were isolated from RO retentates with XAD-8 resin. A variety of approaches such as specific UV absorbance at 254nm (SUV(254)), elemental analysis, size exclusion chromatography (SEC), solid-state cross polarization magic angle spinning (13)C nuclear magnetic resonance spectrometry ((13)C CPMAS NMR), Fourier transform infrared spectrometry (FTIR), and electrospray ionization/ion trap/mass spectrometry (ESI/ion trap/MS) were employed for characterization of HS. The portable RO system exhibited high yield and recovery of DOM for concentrating refinery effluent. The concentration of dissolved organic carbon (DOC) in the refinery effluent was 9.9mg/l, in which humic acids (HA) and fulvic acids (FA) accounted for 2.3% and 34.6%, respectively. Elemental and SUV(254) analyses indicated relative high amounts of aliphatic structures and low amounts of aromatic structures in refinery effluent-derived HS. Refinery effluent-derived HS displayed lower molecular weight than natural HS. The number-average molecular weight (M(n)) and the weight-average molecular weight (M(w)) of HA were 1069 and 2934, and those of FA were 679 and 1212 by SEC, respectively. By ESI/ion trap/MS, the M(n) and the M(w) of FA were 330 and 383. Four kinds of carbon structures (aliphatic, aromatic, heteroaliphatic, and carboxylic carbons) were found in refinery effluent-derived HS by (13)C NMR analysis. The quantitative results support the interpretation that these HS are rich in aliphatic carbons and poor in aromatic carbons. Proteinaceous materials were identified by FTIR analysis in refinery effluent-derived HS.     

The nonlinearity and related band strength of carbon monoxide when applied in ambient air measurement using open long-path Fourier transform infrared spectrometry

The accuracy of CO concentration determination by open-path Fourier transform infrared (FTIR) spectrometry has been re-evaluated in detail. The evaluation focuses on the correction of the calibration curve--the integrated intensity of a standard spectrum--that is used as a comparison spectrum when doing quantitative analysis of CO. Results show that the calibration curve (with 0.5 cm(-1) or 1 cm(-1) resolution) is apparently inclined to be nonlinear under standard conditions, and that the threshold point of nonlinearity is approximately 0.1 atm-cm. Two commercial FTIR field monitoring systems have been used to investigate the nonlinearity trend. The experimental method consists of using open-path FTIR systems in combination with nondispersive infrared (NDIR) monitors to establish the calibration curve in a semi-closed corridor The results have been double-checked using closed-cell dynamic equilibrium systems. When the optical density is larger than a certain value, the curves begin to bend, and when the optical density approaches zero, the band strength is around 178 +/- 3 atm(-1) cm(-2) and 173 +/- 2 atm(-1) cm(-2), respectively, for 0.5 and 1 cm(-1) resolution at standard temperature and pressure (STP). These values are quite different from other published data that have been acquired by the pressurized method or by high-resolution (<0.006 cm(-1)) spectrometers. It is thought that a higher accuracy is achieved when these new calibration results are used to quantify the CO concentration. The error in concentration determination within 0.1 optical density is less than 2%, and that in the higher optical density region is less than 5%.     

Nickel oxide nanoparticles exert cytotoxicity via oxidative stress and induce apoptotic response in human liver cells (HepG2)

Increasing use of nickel oxide nanoparticles (NiO NPs) necessitates an improved understanding of their potential impact on human health. Previously, toxic effects of NiO NPs have been investigated, mainly on airway cells. However, information on effect of NiO NPs on human liver cells is largely lacking. In this study, we investigated the reactive oxygen species (ROS) mediated cytotoxicity and induction of apoptotic response in human liver cells (HepG2) due to NiO NPs exposure. Prepared NiO NPs were crystalline and spherical shaped with an average diameter of 44 nm. NiO NPs induced cytotoxicity (cell death) and ROS generation in HepG2 cells in dose-dependent manner. Further, ROS scavenger vitamin C reduced cell death drastically caused by NiO NPs exposure indicating that oxidative stress plays an important role in NiO NPs toxicity. Micronuclei induction, chromatin condensation and DNA damage in HepG2 cells treated with NiO NPs suggest that NiO NPs induced cell death via apoptotic pathway. Quantitative real-time PCR analysis showed that following the exposure of HepG2 cells to NiO NPs, the expression level of mRNA of apoptotic genes (bax and caspase-3) were up-regulated whereas the expression level of anti-apoptotic gene bcl-2 was down-regulated. Moreover, activity of caspase-3 enzyme was also higher in NiO NPs treated cells. To the best of our knowledge this is the first report demonstrating that NiO NPs caused cytotoxicity via ROS and induced apoptosis in HepG2 cells, which is likely to be mediated through bax/bcl-2 pathway. This work warrants careful assessment of Ni NPs before their commercial and industrial applications.     

Formation of singlet oxygen during farmorubicin oxidation.

The enhanced generation of singlet oxygen (1O2) during oxidation of farmorubicin in the Co(II) + H2O2 system was studied using chemiluminescent, fluorescent and spectrophotometic techniques. The influence of 1O2-quenchers, catalase, superoxide anion radical (O2*-) and hydroxyl radical (HO*) scavengers on the light emission was studied. The spectrophotometric determination of 1O2 was based on bleaching of p-nitrosodimethylaniline caused by an intermediate product of the reaction of 1O2 with imidazole, and was followed by monitoring the decrease in optical density at 440 nm.     

强化混凝-光电氧化组合工艺深度处理垃圾渗滤液膜滤浓缩液

采用强化混凝-光电氧化组合工艺对北京某垃圾填埋场垃圾渗滤液膜滤浓缩液进行处理。探讨了不同混凝剂投加量、电流密度和反应时间对COD去除率的影响,并考察了溶解性有机物的分子量和结构在本工艺中的变化。结果表明:同时投加Ca(OH)2、Fe2(SO4)3和PAM混凝后,COD去除率为28.00%,含量由4 700 mg/L降低到3 384 mg/L;同时投加KMnO4、Fe2(SO4)3和PAM进行二次混凝,COD去除率为60.20%,含量为1 870 mg/L;混凝后水样在电流密度为400A/m2,经3 h光电氧化后,COD去除率为86.20%,含量为650 mg/L。本工艺将垃圾渗滤液膜滤浓缩液中部分大分子量有机物降解为小分子量有机物;光电氧化后,有机物结构被迅速破坏。     

Cholinesterase activity and effects of its inhibition by neurotoxic drugs in Dictyostelium discoideum

Recently, we found acetylcholinesterase (AChE) activity in the ciliate protozoan Paramecium primaurelia. As in the slime mould Dictyostelium discoideum the presence of a serine esterase was found with strong sequence identity to Torpedo AChE, we extended to D. discoideum the investigation on the characterization and possible functions of cholinesterases (ChEs). In amoeboid cells, histochemical, biochemical, and electrophoresis analyses evidenced both a ChE activity able to hydrolyze the substrate PrTChI, and AChE (E.C. 3.1.1.7.) activity similar to Electrophorus electricus AChE. Conversely, butyrylcholinesterase activity was nearly absent, according to our previous results on P. primaurelia. Moreover, the possibility to utilize D. discoideum in a bioassay for the pre-chemical screening both of moist environments and fresh waters, in relation to the occurrence of the neurotoxic organophosphate drugs, such as "basudin", inhibiting ChE activity, was investigated. Exposure to basudin inhibited propionylcholinesterase (PrChE) activity in a dose-dependent manner in the range 10(-1)-10(-7) M (60% at 10(-4) M), without any significant effect on AChE activity. PrChE activity was inhibited slightly by 10(-5) M eserine, and reduced significantly both by 10(-5) M iso-OMPA and BW284C51, classically used to discriminate the different ChE molecular forms. The effects on cell morphology, cell density, and differentiation were evaluated in cultures exposed to PrTChI 10(-5) M or basudin 10(-4) M for a three-day period. The PrTChI-exposed sample exhibited cell morphology, cell density, ability to aggregate, and to form fruiting bodies similar to the control; whereas, the basudin-exposed sample showed anomalies in cell morphology and lower cell density than the control, together with inability to aggregate.     

Effects of ultraviolet light (315 nm), temperature and relative humidity on the degradation of polylactic acid plastic films

The influence of temperature (30, 45 and 60 degrees C) and relative humidity (RH) (30%, 50% and 100%) on the degradation of poly(l-lactic acid) (PLA) films were studied. In addition, the effects of ultraviolet (UV) light (315 nm) on the degradation of PLA films were also analyzed. Various analytical techniques were applied to observe changes in the properties of PLA polymer films. FTIR spectroscopy was used as semi-quantitative method to get information about the chemistry of the degradative process. The degradation rate of PLA was enhanced by increasing temperature and RH, factors responsible for a faster reduction of the weight-average molecular weight (M(W)), of the glass transition temperature (Tg) and of the percentage of elongation at break. Moreover, UV treatment accelerated these phenomena.     

Bioaccumulation kinetics of arsenite and arsenate in Dunaliella salina under different phosphate regimes

Environmental Science and Pollution Research - Dunaliella salina is a potential candidate for the phycoremediation of saline water contaminated with arsenic (As) due to its strong tolerance of salt...     

Using FTIR to corroborate the identity of functional groups involved in the binding of Cd and Cr to saltbush (Atriplex canescens) biomass

Fourier transform infrared (FTIR) studies were performed to confirm the chemical modification of saltbush (Atriplex canescens) biomass and to provide information about the identity and binding characteristics of the chemical groups responsible for the binding of Cd(II), Cr(III), and Cr(VI). In addition, studies were performed to determine the optimum time for the binding of the three ions by saltbush biomass, and to study the efficiency of HCl and sodium citrate as stripping agents. The metal quantification was performed using inductively coupled plasma optical emission spectroscopy (ICP-OES). The results showed that 10 min or less is enough to achieve the maximum metal binding, and that aqueous solutions of 0.1 mM HCl or sodium citrate were enough to strip more than 80% of the bound Cd. It was determined that more than 70% of the bound Cr(III) was stripped using 0.1 mM HCl. Chemical modification of carboxyl and ester groups on the biomass was performed. The FTIR results confirmed that the esterification of carboxyl groups and hydrolysis of ester groups in the native biomass had occurred. The direct effect of these modifications on the binding properties of the biomass provided strong evidence that the carboxyl functionality is the main group responsible for binding Cd and Cr(III). However, the IR data showed that for Cr(VI), a different type of functional group is involved.     

Effect of population density on growth, biomass and nickel accumulation capacity of Lemna gibba (Lemnaceae)

The effect of population densities on the growth rate and metal (nickel) accumulation capacity of Lemna gibba (Lemnaceae) was studied under laboratory conditions. At high population densities (800 or 1600 seedling per pot), we observed decreasing growth rate with increasing L. gibba density. Especially, at a density of 1600 seedling a pot the net growth rate became negative. This lower growth rate may relate to lower local temperatures and nutrients within L. gibba mats. Biomass production was inhibited by an increase in plant density. Additionally, high population densities caused decreasing nickel accumulation by L. gibba. In this study, a simple model was created according to data obtained from this study. The model has suggested that crowding is an important factor in limitation of growth of L. gibba.