Environmental auditing: Theory and applications

The environmental audit has become a regular part of corporate environmental management in Canada and is also gaining recognition in the public sector. A 1991 survey of 75 private sector companies across Canada revealed that 76% (57/75) had established environmental auditing programs. A similar survey of 19 federal, provincial, and municipal government departments revealed that 11% (2/19) had established such programs. The information gained from environmental audits can be used to facilitate and enhance environmental management from the single facility level to the national and international levels. This paper is divided into two sections: section one examines environmental audits at the facility/company level and discusses environmental audit characteristics, trends, and driving forces not commonly found in the available literature. Important conclusions are: that wherever possible, an action plan to correct the identified problems should be an integral part of an audit, and therefore there should be a close working relationship between auditors, managers, and employees, and that the first audits will generally be more difficult, time consuming, and expensive than subsequent audits. Section two looks at environmental audits in the broader context and discusses the relationship between environmental audits and three other environmental information gathering/analysis tools: environmental impact assessments, state of the environment reports, and new systems of national accounts. The argument is made that the information collected by environmental audits and environmental impact assessments at the facility/company level can be used as the bases for regional and national state of the environment reports and new systems of national accounts.     

Waste minimisation in practice

One of the major hindrances to waste minimisation on a construction site is the difficulty in establishing a methodology and using this methodology to benchmark future construction projects. This paper introduces SMARTWaste, a software tool that has been used to audit, reduce and target waste arisings on a construction site. This tool tries to link the construction process and the waste hierarchy. That is reducing waste on a construction site rather than landfilling it. Three applications of the SMARTWaste software will be discussed using case studies from three different types of construction. An evaluation of these case studies shows that, by implementing a waste minimisation scheme on-site, you can improve material recovery for reuse. Also, by using the waste arisings as a benchmark you can reduce your waste arisings on future sites. Application of SMARTWaste or a similar waste minimisation tool on a wider basis could reduce waste arisings and could result in a built environment that consumed less natural resources and energy, and also produced less pollution and waste. Such a built environment would be environmentally and socially more responsive and responsible.     

Near-surface monitoring for the ZERT shallow CO2 injection project

As part of a collaborative effort operated by the Zero Emission Research and Technology Center (ZERT), a series of two shallow releases of CO₂ was performed at a test site in Bozeman, MT. The purpose of the experiment was to simulate possible leakage scenarios from a carbon capture and storage operation in order to further develop and verify monitoring technologies used to characterize and quantify the release of CO₂. The project included collaboration with several research groups and organizations. Presented here are the results of soil–gas monitoring conducted by researchers from the National Energy Technology Laboratory, including CO₂ flux measurement, soil–gas analysis, perfluorocarbon tracer monitoring, and soil resistivity measurements. Together, these methods proved to be effective in detecting and characterizing leakage in the near-surface.     

Book reviews

Book reviewed in this article: Legal reference and source book ENERGY AND RESOURCES LAW '92: Proceedings of the International Bar Association's Section on Energy and Natural Resources Law's 10th Advanced Seminar on Petroleum, Minerals, Energy and Resources Law held in Washington DC: Graham and Trotman Diverse and international RENEWABLE ENERGY: Technology and the Environment, Proceedings of the 2nd World Renewable Energy Congress, Reading, UK, 13-18 September 1992: A.A.M. Sayigh A stimulating read WATER RESOURCES IN THE ARID REALM: Clive Agnew and Ewan Anderson Whatever happened to PV? SOLAR PUMPING: An Introduction and Update on the Technology, Performance, Costs and Economics: Roy Barlow, Bernard McNelis and Anthony Derrick Renewable energy for rural development MICRO-HYDRO DESIGN MANUAL: A Guide to Small-Scale Water Power Schemes: Adam Harvey et al Incentives for good behaviour ECONOMIC POLICY TOWARDS THE ENVIRONMENT: Dieter Helm     

环境审计体系多纬度架构与职业化——《领导干部自然资源资产离任审计试点方案》对环境审计的启动

中央两办于2015年11月印发《开展领导干部自然资源资产离任审计试点方案》,标志着环境责任追究试点工作正式展开,并且启动了环境审计帷幕。环境保护和环境管理问题在我国当前经济社会发展中日益凸显,推动着环境审计主题被提出并列入重要议事日程。鉴于环境审计并不是一个历史长久的成熟概念,在世界上尚且没有统一的内涵外延界定,本文基于中国的审计体系现状,提出环境审计多纬度架构模型,并针对政府环境审计机关、企业内部环境审计机构、社会独立环境审计机构这三类环境审计主体,阐释环境审计功效、环境审计职业化,以及职业化中的知识基础、胜任能力、后续教育培训问题,提出加快推进环境审计职业化的实现策略。     

Chemical looping combustion for power generation—Concept study for a 10 MWth demonstration plant

A semi-commercial 10 MW_th chemical looping combustion (CLC) plant for power production is proposed as a next scale demonstration plant after successful operation of a 120 kW CLC pilot rig. The design criteria for the CLC boiler are derived from the experience obtained from the CLC pilot rig at Vienna University of Technology. The IPSEpro simulation environment is chosen for implementation of the process flow sheet of the CLC power plant. A single pressure steam cycle is suggested for this small scale demonstration plant. Heat exchangers and a five-stage steam turbine are arranged. Basic design parameters of the power plant are derived from detailed mass and energy investigations and discussed. It turns out that the net electric efficiency of such a small scale plant can be expected to be in the range of 32.5–35.8%. However, a demonstration of CLC at such a scale is necessary in order to gain confidence in more sophisticated CLC power generation concepts at larger scale.     

低温试验测量审核分析

测量审核是对实验室具备某项技术能力的实测结果验证,是能力验证活动的重要方式之一。以所在实验室参加低温试验测量审核活动为例,对影响测量结果的因素进行了详细分析,并对测量审核结果进行了不确定度评定,以期探讨如何做好测量审核工作以证明申请单位实验室的指定项目具备高质量的检测能力。     

Carbon flows and carbon use in the German anthroposphere: An inventory

Today, global climate change is one of the most urgent environmental problems. The atmospheric concentration of carbon dioxide (CO₂) has to be stabilised by significant reductions of CO₂ emissions in the next decades to keep the expected temperature rise within tolerable borders. Efforts exceeding the implemented measures to reduce CO₂ emissions in Germany are desirable. An important pre-condition for such measures is a scientific-based inventory of the sources, sinks, and use of carbon.In this paper, we present CarboMoG, i.e. Carbon Flow Model of Germany. CarboMoG is a carbon flow model covering carbon flows, carbon sources and sinks in Germany and the German anthroposphere, showing concurrent energy and non-energy use of carbon sources.The model consists of seven modules in German anthroposphere following the German classification of economic sectors. Carbon flows to and from atmosphere and lithosphere as well as imports and exports were included into the model. The model comprises roughly 220 material flows determined based on material flow procedures for the base year 2000.Main sources of carbon are fossil energy carriers from lithosphere and uptake of CO₂ by crops (52% resp. 48% of all carbon sources). The model calculations show that import of energy carriers dominates total carbon import to Germany (82%). Total non-energy use of carbon in Germany is significantly higher than energy use (386 Mt C and 230 Mt C, resp.). Carbon throughput of Industry is greatest (about 224 Mt C input), followed by Energy (about 129 Mt C input). Agriculture and Forestry & Industry show the highest figure for non-energy use of carbon, energy use of carbon is largest in the Energy sector. Emissions of CO₂ to atmosphere account for 94% of all carbon flows to sinks in Germany. Carbon accumulates in German anthroposphere 5 Mt C in 2000.     

Implementing industrial ecology and design for environment practices: Lawrence livermore national laboratory

Lawrence Livermore National Laboratory (LLNL), one of the nation's three national security laboratories, is initiating a major research effort in industrial ecology with the goal of increasing the economic and environmental efficiency of the U.S. and global economies. Closer to home, ongoing efforts to reduce LLNL's environmental impact on the surrounding community provide an example of how the environmental efficiency of a major research facility can be systematically improved. In the late 1980s, LLNL initiated its waste minimization and pollution prevention program, changing its focus from end-of-pipe waste management to a proactive and preventive strategy—total quality environmental management (TQEM). LLNL's success in integrating pollution prevention with R&D and operational activities is well illustrated by the waste reduction and energy and water conservation accomplishments described in this article. LLNL represents a model of how industrial ecology, design for environment, and pollution prevention can be incorporated into a comprehensive R&D and operational program. This article describes LLNL's developing industrial ecology program, gives some specific technical accomplishments that have application to many industrial facilities, and presents a case study of TQEM at LLNL's remote experimental test facility, Site 300. The integration of TQEM philosophy with LLNL's scientific capabilities holds much promise for new ideas and creative solutions to national and international industrial ecology concerns.     

QUANTIFICATION OF ACTINIDE MIGRATION PATHWAYS AT ROCKY FLATS,COLORADO1

ABSTRACT: Migration of plutonium, americium, and uranium (actinides) in the environment at the Rocky Flats Environmental Technology Site (RFETS) is the subject of ongoing studies to develop effective strategies for cleanup and regulatory closure of the Department of Energy facility. The Actinide Migration Evaluation pathway analysis quantified actinide transport processes to validate a qualitative conceptual model of environmental actinide transport. Major actinide transport mechanisms evaluated include surface water, ground water, airborne, and biological pathways. Relative quantities of actinide movement via different pathways were compared in terms of actinide loads delivered off the RFETS, using a combination of monitoring data, predictive transport models and results from historic RFETS studies. Results indicate air and surface water constitute the dominant transport mechanisms for plutonium and americium. In ground water, shallow alluvial flow is a limited pathway for plutonium and americium because of the low aqueous solubility of these actinides and their tendency to sorb to soil. However, localized flow in shallow alluvium is a more significant pathway for uranium movement, because of the relatively higher solubility of uranium (VI) species, though isotopic ratios indicate much of the uranium is from natural sources. Biological transport of actinides by mammals, birds, fish, and arthropods is small compared to the other pathways.     

An Integrated Benchmarking and Energy Savings Tool for the Iron and Steel Industry

Benchmarking can be a useful tool for understanding energy consumption patterns in an industrial facility and for designing policies to improve energy efficiency. Energy benchmarking for industry is a process in which the energy performance of an individual plant is compared against a common metric that represents ‘standard’ or ‘optimal’ performance. While benchmarking provides insights into the relative energy performance of the plant, it is also a good starting point for analysis of further improvement opportunities. In this paper, the development of an integrated benchmarking and energy efficiency evaluation tool, named BEST (Benchmarking and Energy Savings Tool), is described. The tool is based on a process-step benchmarking approach that allows for a wide variety of differences in feedstocks and products to be included in a fair comparison. BEST has been developed to support two Chinese integrated iron and steel plants in designing a strategic energy management program. BEST has been successfully applied to develop strategic energy-efficiency improvement targets. We describe the tool and report on its use.     

麻栗坡绿柱石矿山的可持续发展战略

作为我国目前惟一的祖母绿矿山-麻栗坡存在着缺乏规划，设备简陋，管理和技术水平低、安全保障条件差以及劳动者素质低等问题，并由此造成的浪费资源，环境污染十分严重。进入21世纪后，如何使该矿山保持可持续发展成为一项非常艰巨的任务。     

Recovery of Fish Communities in a Warm Water Stream Following Pollution Abatement

The long-term recovery process for fish communities in a warm water stream in East Tennessee was studied using quantitative measurements over 20 years. The stream receives effluents from a U. S. Department of Energy (DOE) facility, but since 1985 these effluents have been greatly reduced, eliminated, or diluted as part of a substantial long-term pollution abatement program. The resulting changes in water quantity and quality led to a recovery of the fish communities, evidenced by significant changes in species richness, abundance (density and biomass), and community composition (e.g., number of fish species sensitive to stress). The fish community changes occurred over a spatial gradient (downstream from the headwater release zone nearest the DOE facility) and temporally, at multiple sampling locations in the stream. Changes in measured parameters were associated with specific remedial actions and the intervening steps within the recovery process are discussed with regard to changes in treatment processes.     

The audit orientation tour: Ten steps for improving productivity

It seems like a simple enough exercise. After the opening meeting, the audit team embarks on an orientation tour to familiarize itself with the layout of the facility. A simple ?walk about”? as the Australians would say. If the site is bigenough, maybe the team climbs into a vehicle for the tour. Although the orientation tour typically represents only one hour, this hour is as important as any other for the audit team. This article discusses ten steps audit teams can take to maximize the effectiveness of the tour. The ten steps came about as a result of observing audit teams during many training audits and seeing persistent problems arise.     

Management of environment in developing countries

Summary Environmental problems in developing countries partly arise out of lack of development, hence they are intricately linked to the socio-economic conditions. Environmental awareness and environmental education are critical under these conditions but these are time consuming and slow solutions. Integration of economic and environmental plans for various regions have to be attempted systematically. Time is running out, and unless comprehensive steps are taken up some of the capital assets (such as forests, fresh water, soils, etc.) are likely to be irretrievably damaged.Dr B. Bowonder was, until recently, Chairman of the Centre for Energy, Environment and Technology at the Administrative Staff College, Hyderabad. He recently joined this Journal's Advisory Board and his analysis of the Bhopal Incident (The Environmentalist, 5 (2) 89–103) created considerable interest. He is currently a member of the United Nations Economic and Social Commission for Asia and Pacific.     

An Investigation of Thermal Decomposition Behavior of Hazelnut Shells

Turkey has a drastic potential in terms of biomass energy and it would be of utmost importance for our energy mix if this huge amount of energy is to be utilized. Thermochemical conversion is the most dominant one among the energy conversion processes. The carbonization process is the key point in determining the kinetic parameters of the fuels utilized. Thereafter, the kinetic parameters obtained from carbonization would be utilized in designing the thermochemical conversion equipments. In this study, the thermal decomposition behavior of hazelnut shells was investigated via dynamical thermogravimetry (TG) under N₂ atmosphere. In order to determine the effects of heating rate and gas flow rate, the experiments were performed in four different heating rates of 5, 20, 50, and 100 K/min and two different nitrogen flow rates of 50 and 100 cm³/min. As the heating rate was increased, peak temperature was increased, maximum temperature shifted to the right (higher T zones) and the maximum rate of weight loss was increased. In addition, lignin decomposition temperature interval was decreased whereas; cellulose decomposition temperature interval was increased. Increasing the heating rate from 5 to 20 K/min, hemicellulose decomposition temperature interval was increased. Total weight loss was slightly increased by the increase of gas flow rate. Kinetic parameters were calculated according to Coats Redfern method. It was found that activation energies of thermal decomposition reactions of hazelnut shell varied between 1.30 and 32.19 kJ/mol.     

清洁生产方案实施成效分析

清洁生产方案的质量及可实施性直接关系到企业清洁生产审核的成效。汇总江苏油田推行清洁生产审核单位实施的清洁生产方案380项,从方案的组成、分类、投资、经济效益等方面进行统计分析,阐明了多种无、低费方案,不仅资金投入的回报率高,而且投资风险少,有明显的效益。通过"节能、降耗、减污、增效"这一主导思想产生的各类清洁生产方案的实施,达到了较可观的经济、环境和社会效益。     

培养藻类制取生物能源的研究

能源紧张和环境污染是全世界所面临的共同问题,用藻类替代传统作物生产生物能源是生物质能的重要发展方向之一。文章介绍了国内外对藻类培养条件、光生物反应器型式、藻类基因工程、藻细胞收集方法以及能源藻类生产系统的研究成果。研究认为,以藻类为原料生产生物燃料具有良好的发展前景,并指出了今后能源藻类生长的重点研究方向。     

国家《大气污染防治行动计划》健康效益评估

为了提高空气质量改善进程,2013 年国家发布了《大气污染防治行动计划》。本文基于空气污染与健康效益评估模型(BenMAP),对人口分布资料、大气污染与人体健康影响的暴露反应关系等进行了本土化修正,采用“支付意愿法”与“疾病成本法”相结合的方法,系统评估了《大气污染防治行动计划》实施后,PM_2.5 污染变化引起的环境健康效益。研究结果表明,《大气污染防治行动计划》的实施将在一定程度上降低PM_2.5 环境浓度,改善环境空气质量。如果《大气污染防治行动计划》空气质量目标全面实现,可以避免城镇8.9 万居民的过早死亡,减少12 万人次住院治疗以及941 万人次的门诊和急诊病例,实现的全国健康效益约为867 亿元/ 年,说明了《大气污染防治行动计划》实施的健康有益性。本文对政府部门开展污染损失评估及制定环境健康政策具有重要的参考价值。     

Multi-criteria PSO-based optimal design of grid-connected hybrid renewable energy systems

ABSTRACT

Human-induced climate change through the over liberation of greenhouse gases, resulting in devastating consequences to the environment, is a concern of considerable global significance which has fuelled the diversification to alternative renewable energy sources. The unpredictable nature of renewable resources is an impediment to developing renewable projects. More reliable, effective, and economically feasible renewable energy systems can be established by consolidating various renewable energy sources such as wind and solar into a hybrid system using batteries or back-up units like conventional energy generators or grids. The precise design of these systems is a critical step toward their effective deployment. An optimal sizing strategy was developed based on a heuristic particle swarm optimization (PSO) technique to determine the optimum number and configuration of PV panels, wind turbines, and battery units by minimizing the total system life-cycle cost while maximizing the reliability of the hybrid renewable energy system (HRES) in matching the electricity supply and demand. In addition, by constraining the amount of conventional electricity purchased from the grid, environmental concerns were also considered in the presented method. Various systems with different reliabilities and potential of reducing consumer’s CO₂ emissions were designed and the behavior of the proposed method was comprehensively investigated. An HRES may reduce the annualized cost of energy and carbon footprint significantly.