Distributions, sources and risk assessment of polycyclic aromatic hydrocarbons (PAHs) in topsoil at Ji’nan city, China

Surface soil (0-5 cm) samples from 17 sampling sites including different functional areas at Ji'nan city in Shandong Province of China were collected and analyzed for 16 EPA priority polycyclic aromatic hydrocarbons (PAHs). The total PAH concentrations were in the range from 1.31 mg kg(-1) to 254.08 mg kg(-1) (dry weight), and the average level of total PAHs was 23.25 mg kg(-1). The highest total PAHs concentrations were found in steel and iron plant at industrial areas. The total PAHs concentrations in industrial areas were markedly higher than those in other different functional areas. According to comparing total PAHs concentration in Ji'nan city to that of other urban areas, it was found that total PAHs concentrations were 6 to 137 times higher than other areas because of some specific sampling sites such as steel and iron plant and one main roadside. The results showed that PAHs in topsoil of Ji'nan city were suffered from strong pyrogenic influence, especially in industrial areas. However about 52.9% soil samples were mainly originated from both pyrogenic and petrogenic mixed sources based on Flu/Pyr ratios and Phe/Ant ratios. Furthermore, It was found that all individual PAHs except Fle were significantly correlated (P < 0.01) with LMW, HMW, total PAHs and SOM, and individual PAHs except Fle in soils were significantly correlated (P < 0.01) with each other. The nemerow composite index to assess the environmental quality showed that the soil sample of steel and iron plant in industrial areas and one main roadside were heavy pollution of PAHs, and about 47% soil sampling sites were safety, about 53% soil sampling sites were got different grades of PAHs pollution.     

Presence, distribution, and origins of polycyclic aromatic hydrocarbons (PAHs) in sediments from Bahía Blanca estuary, Argentina

This paper is the first comprehensive survey of polycyclic aromatic hydrocarbons (PAHs) in coastal sediments in Bahia Blanca, Argentina, and provides useful information on their levels of concentration, composition, and sources of these pollutants. The total concentrations of PAHs ranged from 15 to 10,260 ng g^???1. The highest contents (mean 3,315 ng g^???1) of total PAHs in marine sediments were found in the inner channels of the estuary, while the lower ones (204 ng g^???1) belong to samples collected far away from contamination sources. The global average recorded in this study (1,500 ng g^???1) indicates that the studied area lies within the referenced category of industrialized coastal zones under chronic pollution. The diagenetic PAH contribution was found to be negligible at all sampled locations; however, the calculation of molecular ratios determined an overimposition of pyrolitic PAHs over the petrogenic input. Further, the use of principal components analysis (PCA) clearly separated ring group compounds and enabled the determination of pyrolitic/combustion PAHs dominancy.     

Heavy metal and polycyclic aromatic hydrocarbons in Ebrié lagoon sediments, Côte d’Ivoire

Surface sediments throughout Ebrié lagoon, Côte d’Ivoire were collected in 2001 and analyzed for their heavy metal and polycyclic aromatic hydrocarbons (PAH) contaminant content. Geochemical maps of heavy metals (Cd, Cu, Zn, Fe, and Mn) in the surface sediment were produced based on geographical information system (GIS) technology. Heavy metals and PAH were detected at high concentration and provide evidence for several anthropogenic inputs to the lagoon. A significant spatial relationship was found for Fe, Zn, and Cu in the sediment using a GIS-based analysis, suggesting that these metal contaminants in the sediments of the Biétri bay had common sources.     

Remediation of hydrocarbons in crude oil-contaminated soils using Fenton’s reagent

Sandy soil samples spiked with Bonny light crude oil were subsequently treated with Fenton's reagent at acidic, neutral, and basic pH ranges. Oil extracts from these samples including an untreated one were analyzed 1?week later with a gas chromatograph to provide evidence of hydrocarbon depletion by the oxidant. The reduction of three broad hydrocarbon groups-total petroleum hydrocarbon (TPH); benzene, toluene, ethylbenzene, and xylene (BTEX); and polycyclic aromatic hydrocarbon (PAH) were investigated at various pHs. Hydrocarbon removal was efficient, with treatment at the acidic pH giving the highest removal of about 96% for PAH, 99% for BTEX, and some TPH components experiencing complete disappearance. The four-ringed PAHs were depleted more than their three-ringed counterparts at the studied pH ranges.     

Gas–particle concentration,distribution, and health risk assessment of polycyclic aromatic hydrocarbons at a traffic area of Giza,Egypt

Atmospheric particulate and gaseous polycyclic aromatic hydrocarbons (PAHs) samples were collected from an urban area in Dokki (Giza) during the summer of 2007 and the winter of 2007–2008. The average concentrations of PAHs were 1,429.74 ng/m³ in the particulate phase, 2,912.56 ng/m³ in the gaseous phase, and 4,342.30 ng/m³ in the particulate + gaseous phases during the period of study. Dokki has high level concentrations of PAH compounds compared with many polluted cities in the world. The concentrations of PAH compounds in the particulate and gaseous phases were higher in the winter and lower in the summer. Total concentrations of PAHs in the particulate phase and gaseous phase were 22.58% and 77.42% in summer and 36.97% and 63.03% in winter of the total (particulate + gaseous) concentrations of PAHs, respectively. The gaseous/particulate ratios of PAHs concentration were 3.43 in summer and 1.71 in winter. Significant negative correlation coefficients were found between the ambient temperature and concentrations of the total PAHs in the particulate and gaseous phases. The distribution of individual PAHs and different categories of PAHs based on aromatic ring number in the particulate and gaseous phases during the summer and winter were nearly similar, indicating similar emission sources of PAHs in both two seasons. Benzo(b)fluoranthene in the particulate phase and naphthalene in the gaseous phase were the most abundant compounds. Diagnostic concentration ratios of PAH compounds indicate that these compounds are emitted mainly from pyrogenic sources, mainly local vehicular exhaust emissions. Health risks associated with the inhalation of individual PAHs in particulate and gaseous phases were assessed on the basis of its benzo(a)pyrene equivalent concentration. Dibenzo(a,h)anthracene and benzo(a)pyrene in the particulate phase and benzo(a)pyrene and benzo(a)anthracene in the gaseous phase were the greatest contributors to the total health risks. The relative mean contributions of the total carcinogenic activity (concentrations) of all PAHs to the total concentrations of PAHs were 29.37% and 25.15% in the particulate phase and 0.76% and 0.92% in the gaseous phase during the summer and winter, respectively. These results suggest that PAHs in the particulate phase in the ambient air of Dokki may pose a potential health risk.     

PAHs in soils and estimated air�Csoil exchange in the Pearl River Delta, South China

In this study, 74 soil samples collected from the Pearl River Delta were analyzed for polycyclic aromatic hydrocarbons (PAHs). The PAH mixture in the soils is mainly of low molecular weight compounds, with naphthalene (21.4%) and phenanthrene (21.8%) being dominant. Soil PAH levels from the Pearl River Delta are relatively low (28?C711 ng/g, averaged 192 ng/g) compared to those from urban soils in temperate regions. The mean concentration of ??PAHs generally decrease with increasing distance from the city center, with ??PAHs of paddy soils > crop soil > natural soil. PAHs in the air were measured during a year-round sampling campaign using semipermeable membrane devices, and the transfer of chemicals between the soil and air compartments were estimated. Soil?Cair fugacity quotient calculations showed a highly uncertain equilibrium position of PAHs, with net volatilization of naphthalene and fluorene, whereas net deposition of phenanthrene, fluoranthene, and pyrene, indicating a capacity for the air to supply the soil with more substances.     

Elemental analysis of aerosols in Tehran’s atmosphere using PIXE and identification of pollution sources

In this study, the proton-induced X-ray emission (PIXE) technique has been applied to measure the elemental composition and concentrations of particulate matter of 220 samples of aerosols in Tehran’s atmosphere within a 450-day time interval starting from March 2009 and ending in June 2010, covering all four seasons. PIXE analysis shows the samples are comprised of various elements including Al, Si, S, Cl, K, Ca, Ti, V, Cr, Mn, Fe, Ni, Cu, Zn, Br, Rb, Sr, and Pb. Also, to obtain more information about the sources of pollution and to identify the major sources of urban particulate matter, principal component analysis (PCA) was used. Furthermore, micro-PIXE was performed to study individual aerosols in some samples. Results revealed that the concentration of elements originating from vehicle emissions increases three times in winter; whereas the concentration of elements with soil origin remains constant. Based on wind rose maps, it is inferred that the high concentrations of the elements Al, Si, K, Ca, Ti, Mn, and Fe are associated with natural dust brought by winds into Tehran from the west.     

Identification and analysis of polyaromatic hydrocarbons (PAHs)—biodegrading bacterial strains from refinery soil of India

Polyaromatic hydrocarbons (PAHs) utilizing bacteria were isolated from soils of seven sites of Mathura refinery, India. Twenty-six bacterial strains with different morphotypes were isolated. These strains were acclimatized to utilize a mixture of four polycyclic aromatic hydrocarbons, i.e., anthracene, fluorene, phenanthrene, and pyrene, each at 50 mg/L concentration as sole carbon source. Out of total isolates, 15 potent isolates were subjected to 16S rDNA sequencing and identified as a member of diverse genera, i.e., Bacillus, Acinetobacter, Stenotrophomonas, Alcaligenes, Lysinibacillus, Brevibacterium, Serratia, and Streptomyces. Consortium of four promising isolates (Acinetobacter, Brevibacterium, Serratia, and Streptomyces) were also investigated for bioremediation of PAH mixture. This consortium was proved to be efficient PAH degrader resulting in 40–70 % degradation of PAH within 7 days. Results of this study indicated that these genera may play an active role in bioremediation of PAHs.     

Seasonal variations of monocarbonyl and dicarbonyl in urban and sub-urban sites of Xi’an,China

Seventeen airborne carbonyls including monocarbonyls and dicarbonyls were determined in urban and sub-urban sites of Xi’an, China in three seasons in 2010. In winter, acetone was the most abundant carbonyl in the urban site due to usage of organic solvents in constructions and laboratories and its slower atmospheric removal mechanisms by photolysis and reaction with hydroxyl radical than those of formaldehyde and acetaldehyde. In the sub-urban site, acetaldehyde was the most abundant carbonyl, followed by formaldehyde and acetone. During summer, however, formaldehyde was the most dominant carbonyl in both sites. The photooxidations of a wide range of volatile organic compounds (VOCs) yielded much more formaldehyde than other carbonyls under high solar radiation and temperature. In the urban site, the average concentrations of dicarbonyls (i.e., glyoxal and methyglyoxal) in spring and summer were higher than that in winter. Transformation of aromatic VOCs emitted from fuel evaporation leads to the formation of 1,2-dicarbonyls. A reverse trend was observed in sub-urban sites, as explained by the relatively low abundances and accumulations of VOC precursors in the rural atmosphere during warm seasons. Moreover, cumulative cancer risk based on measured outdoor carbonyls (formaldehyde and acetaldehyde) in Xi’an Jiaotong University and Heihe was estimated (8.82?×?10^?5 and 4.96?×?10^?5, respectively). This study provides a clear map on the abundances of carbonyls and their source interpretation in the largest and the most economic city in Northwestern China.     

The pollution and ecological risk of endosulfan in soil of Huai’an city, China

Endosulfan, a persistent organic pollutant newly listed under the Stockholm Convention, is currently widely produced and used as a pesticide in China. Concentrations of endosulfans (including α-, β-isomers, and their metabolite endosulfan sulfate) were determined in surface soil collected from Huai’an city, where the largest endosulfan producer is located. The concentrations of Σendosulfan (sum of α-endosulfan, β-endosulfan, and endosulfan sulfate) at all sites ranged from 0.28 to 44.81?ng/g dry weight (dw), following a lognormal distribution. The geometric mean was 1.09?ng/g dw, and the geometric standard deviation was 3.02. The β-endosulfan levels were consistently greater than those of α-isomer. The concentration ratios of α-endosulfan to β-endosulfan ranged from 0.03 to 0.70, which were much lower than the commercial endosulfan mixture. This is because that α-endosulfan is more volatile and degrades faster than β-endosulfan in soil. The contour map of Σendosulfan levels in soil indicates that the factory was the point pollution source with the highest endosulfan level in its surrounding area, especially the southern area. However, the non-point agricultural sources are more important. Based on Monte Carlo simulation, the Σendosulfan inventory in soil in Huai’an is estimated to be 0.8–3.0 tons. In order to understand the potential ecological risk of endosulfan, the Monte Carlo-based hazard quotient distribution was estimated and showed that Σendosulfan posed a potentially high risk to soil organisms. To our knowledge, this study is the first that reports soil pollution and risk of endosulfan around the manufacturer in China. This study will help China’s implementation of Stockholm Convention for the reduction and elimination of endosulfan in future.     

Distribution and source analysis of aluminum in rivers near Xi’an City, China

To study the status and source of aluminum (Al) contamination, a total of 21 sampling sites along six rivers near Xi’an City (Shaanxi province, China) were investigated during 2008–2010. The results indicated that the average concentration of total Al (Al_t) in the six rivers increased by 1.6 times from 2008 to 2010. The spatial distribution of Al_t concentrations in the rivers near Xi’an City was significantly different, ranged from 367 μg/L (Bahe River) to 1,978 μg/L (Taiping River). The Al_t concentration was highest near an industrial area for pulp and paper-making (2,773 μg/L), where the Al level greatly exceeded the water quality criteria of both the USA (Criterion Continuous Concentration, 87 μg/L) and Canada (100 μg/L). The average concentration of inorganic monometric aluminum (Al_im) was 72 μg/L which would pose threats to fishes and other aquatic lives in the rivers. The concentrations of exchangeable Al (Al_ex) in the sediment of the Taiping River sampled were relatively high, making it to be an alternative explanation of increasing Al concentrations in the rivers near Xi’an City. Furthermore, an increasing Al level has been detected in the upstream watershed near Xi’an City in recent years, which might indicate another notable pollution source of Al.     

Natural attenuation of petroleum hydrocarbons—a study of biodegradation effects in groundwater (Vitanovac,Serbia)

The role of natural attenuation processes in groundwater contamination by petroleum hydrocarbons is of intense scientific and practical interest. This study provides insight into the biodegradation effects in groundwater at a site contaminated by kerosene (jet fuel) in 1993 (Vitanovac, Serbia). Total petroleum hydrocarbons (TPH), hydrochemical indicators (O₂, NO₃^?, Mn, Fe, SO₄^2?, HCO₃^?), δ¹³C of dissolved inorganic carbon (DIC), and other parameters were measured to demonstrate biodegradation effects in groundwater at the contaminated site. Due to different biodegradation mechanisms, the zone of the lowest concentrations of electron acceptors and the zone of the highest concentrations of metabolic products of biodegradation overlap. Based on the analysis of redox-sensitive compounds in groundwater samples, redox processes ranged from strictly anoxic (methanogenesis) to oxic (oxygen reduction) within a short distance. The dependence of groundwater redox conditions on the distance from the source of contamination was observed. δ¹³C values of DIC ranged from ??15.83 to ??2.75‰, and the most positive values correspond to the zone under anaerobic and methanogenic conditions. Overall, results obtained provide clear evidence on the effects of natural attenuation processes—the activity of biodegradation mechanisms in field conditions.     

Concentrations of sulphur and heavy metals in needles and rooting soils of Masson pine (Pinus massoniana L.) trees growing along an urban–rural gradient in Guangzhou, China

Current (C) and previous year (C + 1) needles and soils (organic horizon, 0-10 cm and 10-20 cm mineral depth) of Masson pine (Pinus massoniana L.) trees were sampled at four forested sites (Huang Pu industrial district, HP; South China Botanical Garden, BG; Mao Feng Mt., MF; and Nan Kun Mt., NK) in Guangzhou along a urban-rural gradient and analyzed for sulfur (S) and heavy metals (Cu, Zn, Ni, Cd, Cr and Pb) concentrations. Needle concentrations of all the elements were significantly higher at industrial HP than at other three sites, except for Cu and Pb which were highest at the traffic site (BG). The C + 1 needles generally had higher Cu, Cd, Pb, Zn, Cr than the C needles while the opposite was for Ni and S. Total and available Cd, Pb, Zn in soils peaked at the urban sites (HP and BG) and decreased at suburban MF and rural NK. Heavy metals were generally higher in the organic soils than in the mineral soils at all sites. Zinc and Pb at all sites, and Cd, S and Cu at the urban sites (HP and BG) in soils or pine needles were above or near their respective natural background levels, implying that threats resulted from these toxic elements occurred on local particularly urban forests, but did not for Cr and Ni due to their presence below their background values. Our results demonstrated that elements concentrations in needles and soils had reflected the variability of pollutants and the environmental quality change along the urban-rural transect, and were efficient as biomonitors to assess the influence of anthropogenic activities along the urbanization course on forest health.     

Trophic dynamics of U, Ni, Hg and other contaminants of potential concern on the Department of Energy’s Savannah River Site

The Department of Energy’s Savannah River Site is a former nuclear weapon material production and current research facility located in South Carolina, USA. Wastewater discharges from a fuel and nuclear reactor target manufacturing facility released depleted and natural U, as well as other metals into the Tims Branch-Steed Pond water system. We investigated the current dynamics of this system for the purposes of environmental monitoring and assessment by examining metal concentrations, bioavailability, and trophic transfer of contaminants in seven ponds. Biofilm, detritus, and Anuran and Anisopteran larvae were collected and analyzed for stable isotopes (δ ¹⁵N, δ ¹³C) and contaminants of potential concern (COPC) with a focus on Ni, U, and Hg, to examine metal mobility. Highest levels of Ni and U were found in biofilms U (147 and 332 mg kg^?1 DW, respectively), while highest Hg levels were found in tadpoles (1.1 mg kg^?1 DW). We found intraspecific biomagnification of COPCs as expressed through stable isotope analysis. Biofilms were the best indicators for contamination and Anuran larvae with the digestive tract removed were the best indicators of the specific bioavailability of the focal metals. Monitoring data showed that baseline δ ¹⁵N values differed between ponds, but within a pond, values were stable throughout tadpole Gosner stage, strengthening the case to use this species for monitoring purposes. It is likely that there still is risk to ecosystem integrity as COPC metals are being assimilated into lower trophic organisms and even low levels of this mixture has shown to produce deleterious effects to some wildlife species.     

Determining the ‘optimal’ level of pollution (PM2.5) generated by industrial and residential sources

This study provides an optimization model that explicitly determines the ‘optimal’ level of pollution of fine particulate matter (PM_2.5) by analyzing various options for reducing emissions from industrial and residential sources in the second largest urban area in Chile. Several conclusions that had not been previously addressed or sufficiently highlighted in the literature were discerned. The most notable conclusions included the importance of regulating all emission sources and not just industrial sources (which are typically fewer in number and easier to monitor), the homogeneity in ‘optimal’ levels of pollution from urban districts when considering the long-term effects on human health (which would support the adoption of uniform regulations), and the asymmetry in confidence intervals associated to the ‘optimal’ level of pollution.     

Comparison of China’s Environmental Impact Assessment (EIA) Law with the European Union (EU) EIA Directive

In this paper, we first review the development of China’s Environmental Impact Assessment (EIA) system in the past 30 years. Then we compare the framework and operational procedures of China’s new EIA law with those of the EU EIA Directive. We also compare public participation, as well as sanctions and control in the two EIA systems. In addition, we identify where the processes in both EIA systems are similar or different from one another. By comparison, we noted that there are at least three obvious weaknesses in China’s EIA system: (1) the application of new models for EIA legislation; (2) the improvement of EIA guidance and education; and (3) the enhancement of public participation in EIA process. Our study indicates that these three major shortcomings should be overcome and improved in China’s EIA system, when compared with the EU EIA system.     

Distribution of heavy metals in the dissolved and suspended phase of the sea-surface microlayer, seawater column and in sediments of Singapore’s coastal environment

Concentrations of heavy metals were determined in the water column (including the sea-surface microlayer, subsurface, mid-depth and bottom water) and sediments from Singapore’s coastal environment. The concentration ranges for As, Cd, Cr, Cu, Ni, Pb and Zn in the seawater dissolved phase (DP) were 0.34–2.04, 0.013–0.109, 0.07–0.35, 0.23–1.16, 0.28–0.78, 0.009–0.062 and 0.97–3.66 μg L⁻¹ respectively. The ranges for Cd, Cr, Cu, Ni, Pb and Zn in the suspended particulate matter (SPM) were 0.16–0.73, 6.72–53.93, 12.87–118.29, 4.34–60.71, 1.10–6.08 and 43.09–370.49 μg g⁻¹, respectively. Heavy metal concentrations in sediments ranged between 0.054–0.217, 37.48–50.52, 6.30–21.01, 13.27–26.59, 24.14–37.28 and 48.20–62.36 μg g⁻¹ for Cd, Cr, Cu, Ni, Pb and Zn, respectively. The lowest concentrations of metals in the DP and SPM were most frequently found in the subsurface water while the highest concentrations were mostly observed in the SML and bottom water. Overall, heavy metals in both the dissolved and particulate fractions have depth profiles that show a decreasing trend of concentrations from the subsurface to the bottom water, indicating that the prevalence of metals is linked to the marine biological cycle. In comparison to data from Greece, Malaysia and USA, the levels of metals in the DP are considered to be low in Singapore. Higher concentrations of particulate metals were reported for the Northern Adriatic Sea and the Rhine/Meuse estuary in the Netherlands compared to values reported in this study. The marine sediments in Singapore are not heavily contaminated when compared to metal levels in marine sediments from other countries such as Thailand, Japan, Korea, Spain and China.     

Iron and sulfur geochemistry in semi-arid mangrove soils (Ceará, Brazil) in relation to seasonal changes and shrimp farming effluents

Iron and sulfur are key elements in the biogeochemistry of estuarine soils, in which Fe and sulfate reduction (SR) pathways are important for organic matter decomposition. In the semi-arid coast of NE Brazil, mangroves are characterized by large seasonal variations in weather and the presence of numerous shrimp farms. The objective was to determine the impacts of shrimp farm effluents on iron and sulfur geochemistry in mangrove soils under the semi-arid climate of NE Brazil. A seasonal study was made of two mangrove forest soils (SF, a mangrove forest that directly receives wastewater from shrimp ponds and CS, a control site). Pyrite Fe, oxyhydroxides Fe, acid volatile sulfide, degree of pyritization (DOP), pH, Eh, total organic carbon (TOC) and total S were determined. There was a clear decrease in pyritic Fe and DOP in the SF soils, which may be related to the anaerobic oxidation of pyrite coupled with nitrate reduction, or to the dominance of denitrification over SR. Lower TOC contents in the SF site suggest that below ground decomposition increased in response to eutrophication. The seasonal variations led to important changes in the semi-arid mangrove soils. During the dry period, both soils experienced oxidizing conditions with remarkable loss of reduced and oxidized forms of Fe, which may have important environmental implications as Fe is biolimiting for marine primary production. The data show that both factors (seasonal weather variations and shrimp effluents) play important roles in the geochemical processes that occur in these soils and, thus, may affect their functioning and maintenance.     

Organochlorine pesticide (OCP) residues in cow??s, buffalo??s, and sheep??s milk from Afyonkarahisar region, Turkey

In this study, it was aimed to determine organochlorine pesticides (OCPs) in three types of milk (cow's, buffalo's, and sheep's milk) produced in Afyonkarahisar province of Turkey. The results indicated that these milk specimens were found to be contaminated by 21 different pesticides. Sixteen OCP residues were detected in sheep's milk and it was followed with 14 pesticides in buffalo's milk and 11 pesticides in cow's milk. Dominant pesticides in all samples examined were beta-HCH in buffalo's, cow's, and sheep's milk in the concentrations of 63.36, 91.32, and 122.98 ng/ml, respectively. Total OCP levels were found to be 243.81 ng/ml in sheep's milk, 151.02 ng/ml in cow's milk, and 133.38 ng/ml in buffalo's milk. Some of the pesticides detected were found to be in the excess amount of the acceptable level regarding the EU regulations.