Application of ANP and DEMATEL to evaluate the decision-making of municipal solid waste management in Metro Manila

A municipal solid waste management (MSW) expert group was consulted in order to mirror how government officials might reach an effective solution regarding municipal solid waste management in Metro Manila. A critical issue regarding this is how the expert group can better evaluate and select a favorable MSW management solution using a series of criteria. MSW management solution selection is a multiple criteria decision-making (MCDM) problem, which requires the consideration of a large number of complex criteria. A robust MCDM method should consider the interactions among these criteria. The analytic network process (ANP) is a relatively new MCDM method which can deal with all kinds of interactions systematically. The Decision Making Trial and Evaluation Laboratory (DEMATEL) not only can convert the relations between cause and effect of criteria into a structural model, but also can be used as a way to handle the inner dependences within a set of criteria. Hence, this paper applies an effective solution based on a combined ANP and DEMATEL method to assist the expert group evaluating different MSW management solutions. According to the results, the best solution is for each city to have its own type of thermal process technology and resource recovery facility before landfill rather than entering a joint venture with enterprises or going into build-operate-transfer projects in order to be able to construct thermal process technologies and resource recovery facilities.     

Application of processed organic municipal solid waste on agricultural land – a scenario analysis

Source separation, composting and anaerobic digestion, with associated land application, are increasingly being considered as alternative waste management strategies to landfilling and incineration of municipal solid waste (MSW). Environmental life cycle assessments are a useful tool in political decision-making about waste management strategies. However, due to the diversity of processed organic MSW and the situations in which it can be applied, the environmental impacts of land application are very hard to determine by experimental means. In the current study, we used the agroecosystem model Daisy to simulate a range of different scenarios representing different geographical areas, farm and soil types under Danish conditions and legislation. Generally, the application of processed organic MSW resulted in increased emissions compared with the corresponding standard scenarios, but with large differences between scenarios. Emission coefficients for nitrogen leaching to the groundwater ranged from 0.03 to 0.87, while those for nitrogen lost to surface waters through tile drains ranged from 0 to 0.30. Emission coefficients for N₂O formation ranged from 0.013 to 0.022 and for ammonia volatilization from 0.016 to 0.11. These estimates are within reasonable range of observed values under similar conditions. Furthermore, a sensitivity analysis showed that the estimates were not very sensitive to the mineralization dynamics of the processed organic MSW. The results show that agroecosystem models can be powerful tools to estimate the environmental impacts of land application of processed MSW under different conditions. Despite this, agroecosystem models have only been used to a very limited degree for this purpose.     

Geospatial strategy for sustainable management of municipal solid waste for growing urban environment

This paper presents the implementation of a Geospatial approach for improving the Municipal Solid Waste (MSW) disposal suitability site assessment in growing urban environment. The increasing trend of population growth and the absolute amounts of waste disposed of worldwide have increased substantially reflecting changes in consumption patterns, consequently worldwide. MSW is now a bigger problem than ever. Despite an increase in alternative techniques for disposing of waste, land-filling remains the primary means. In this context, the pressures and requirements placed on decision makers dealing with land-filling by government and society have increased, as they now have to make decisions taking into considerations environmental safety and economic practicality. The waste disposed by the municipal corporation in the Bhagalpur City (India) is thought to be different from the landfill waste where clearly scientific criterion for locating suitable disposal sites does not seem to exist. The location of disposal sites of Bhagalpur City represents the unconsciousness about the environmental and public health hazards arising from disposing of waste in improper location. Concerning about urban environment and health aspects of people, a good method of waste management and appropriate technologies needed for urban area of Bhagalpur city to improve this trend using Multi Criteria Geographical Information System and Remote Sensing for selection of suitable disposal sites. The purpose of GIS was to perform process to part restricted to highly suitable land followed by using chosen criteria. GIS modeling with overlay operation has been used to find the suitability site for MSW.     

Contribution of a municipal solid waste incinerator to the trace metals in the surrounding soil

This study analyses the pedological environment of the area near a municipal waste incinerator that has been operating in the south-east district of Pisa for approximately 20?years. There are many other industrial activities in the area besides the incinerator, which represent possible sources of pollution, as well as heavy road traffic. The study area was defined by a 0-4-km zone around the site with a population of approximately 12,000 residents. The study included the physical and chemical characterisation of 100 samples of soil and an analysis of trace metals such as Cr, Ni, Pb, Zn, Hg, As and Cd. The samples were grouped into soil use categories. The results showed Zn, Pb and Hg correlated with their potentially mobile fractions, and suggested an anthropic contribution to their presence in the soil. Ni, Cr and As showed values attributable to a lithological origin. This was consistent with the PCA results. The aim was to define the environmental state of the soil of the area in order to create a reference for future research and to verify the possible presence of pollution from other sources (local industrial activities and traffic).     

Monitoring quantity and characteristics of municipal solid waste in Dhaka City

A reliable estimate of the quantity of solid waste generation in the city is very important for proper solid waste planning and management. However, reported estimates of solid waste generation vary widely and lead to questionability. The reported values have been derived on the assumption of demography, standard rate of waste generation by households, density values, number of trucks engaged for waste transportation and monitoring of truck movement at dump sites, etc. This diverse nature of the available data and the question of accuracy necessitate a rigorous study that has tried to document the waste quantity in the recently formulated master plan of Dhaka City. The socio-economic parameters, behavioral characteristics, generation sources, seasonality, and per capita growth rate are considered in estimating the waste quantity along with its future projections. The findings from the estimation of waste quantities state that seasonal differences in the municipal solid waste stream are not substantial. The most seasonably variable material in the municipal solid waste stream is food waste. Residential waste is relatively homogeneous. Although there are some differences in waste generation depending on demographic and other local factors, most households dispose of essentially similar types of wastes. Variation occurs in waste composition dependent upon income levels and category of sources. Variation also occurs based upon the extent of source reduction and recycling opportunities. As opportunities exist to recycle wastes, the recycling facilities might have to grow at a similar pace to the generation of waste. Physical and chemical characteristics of solid waste are important to implement the waste disposal and management plan for the selection of resource and energy recovery potentials. A number of studies have been conducted to determine the composition of wastes including moisture content and calorific value. The data show that the moisture content in city waste is significantly higher and the calorific value is much lower, which determines the viability of composting or anaerobic digestions rather than waste combustion.     

Distribution and availability of trace elements in municipal solid waste composts

Trace element contamination is one of the main problems linked to the quality of compost, especially when it is produced from urban wastes, which can lead to high levels of some potentially toxic elements such as Cu, Pb or Zn. In this work, the distribution and bioavailability of five elements (Cu, Zn, Pb, Cr and Ni) were studied in five Spanish composts obtained from different feedstocks (municipal solid waste, garden trimmings, sewage sludge and mixed manure). The five composts showed high total concentrations of these elements, which in some cases limited their commercialization due to legal imperatives. First, a physical fractionation of the composts was performed, and the five elements were determined in each size fraction. Their availability was assessed by several methods of extraction (water, CaCl(2)-DTPA, the PBET extract, the TCLP extract, and sodium pyrophosphate), and their chemical distribution was assessed using the BCR sequential extraction procedure. The results showed that the finer fractions were enriched with the elements studied, and that Cu, Pb and Zn were the most potentially problematic ones, due to both their high total concentrations and availability. The partition into the BCR fractions was different for each element, but the differences between composts were scarce. Pb was evenly distributed among the four fractions defined in the BCR (soluble, oxidizable, reducible and residual); Cu was mainly found in the oxidizable fraction, linked to organic matter, and Zn was mainly associated to the reducible fraction (iron oxides), while Ni and Cr were mainly present almost exclusively in the residual fraction. It was not possible to establish a univocal relation between trace elements availability and their BCR fractionation. Given the differences existing for the availability and distribution of these elements, which not always were related to their total concentrations, we think that legal limits should consider availability, in order to achieve a more realistic assessment of the risks linked to compost use.     

The potential of biogas production from municipal solid waste in a tropical climate

The objective of this study was to estimate the potential of organic municipal solid waste generated in an urban setting in a tropical climate to produce biogas. Five different categories of wastes were considered: fruit waste, food waste, yard waste, paper waste, and mixed waste. These fractions were assessed for their efficiency for biogas production in a laboratory-scale batch digester for a total period of 8 weeks at a temperature of 15–30 °C. During this period, fruit waste, food waste, yard waste, paper waste, and mixed waste were observed to produce 0.15, 0.17, 0.10, 0.08, and 0.15 m³ of biogas per kilogram of volatile solids, respectively. The biogas produced and caloric value of each feedstock was in the range of 1.25?×?10^?3 m³ (17 kWh)/cap/day (paper waste) to 15?×?10^?3 m³ (170 kWh)/cap/day (mixed waste). Paper waste produced the least (<1×10^?3(<17.8 kWh)/cap/day), and mixed waste produced the highest methane yield (10?×?10^?3 m³ (178 kWh)/cap/day). Thus, mixed waste was found to be more efficient than other feedstocks for biogas and methane production; this was mainly related to the better C/N ratio in mixed waste. Taking the total waste production in Jimma into account, the total mixed organic solid waste could produce 865?×?10³ m³ (5.4 m³/capita) of biogas or 537?×?10³ m³ (3.4 m³/capita) of methane per year. The total caloric value of methane production potential from mixed organic municipal solid waste was many times higher than the total energy requirement of the area.     

炉排型城市生活垃圾焚烧炉排气中二(口恶)(口英)污染状况及存在问题

选择四种规模不同的炉排型生活垃圾焚烧炉,分别对其排放烟气中的二(口恶)(口英)进行测定,从不同炉排型垃圾焚烧炉二(口恶)(口英)的排放现状并结合实际调查结果表明,不同炉型的生活垃圾焚烧炉存在一些共性问题,尚需加强垃圾焚烧的炉前、炉中及烟气处理各个环节的运行管理.     

炉排型城市生活垃圾焚烧炉排气中二

选择四种规模不同的炉排型生活垃圾焚烧炉,分别对其排放烟气中的二     

北京市生活垃圾中重金属元素污染特性调查

采用现场调研取样和理化分析检测的方法对北京市城区垃圾中重金属含量水平、主要污染元素和主要污染物进行测定,并在调查基础上提出北京市城区垃圾重金属污染的防治对策,为废弃物减量化、无害化与资源化提供依据。     

Study on the law of heavy metal leaching in municipal solid waste landfill

Comparative leaching experiments were carried out using leaching medium with different pH to municipal solid waste in the landfill columns in order to investigate the mobility of heavy metals. The leachate pH and oxidation–reduction potential were measured by oxidation–reduction potential analyzer; the contents of heavy metals were measured by inductively coupled plasma mass spectrometry. It is very different in leaching concentrations of heavy metals; the dynamic leaching of heavy metals decreased with the rise of the leaching amount on the whole. Acid leaching medium had definite influence on the leaching of heavy metals in the early landfill, but it had the obvious inhibition effect on the leaching in the middle and late period of landfill; the neutral and alkaline leaching medium are more beneficial to the leaching of heavy metals. Due to the influence of the environment of landfill, the differences of the results in cumulative leaching amount, leaching rate, and leaching intensity of heavy metals are very big. The calculation results of the release rates of heavy metals prove that the orders of the release rates are not identical under different leaching conditions. Acid rain made heavy metals migrate from municipal solid waste to soil and detain in soil more easily; approached neutral and alkaline leaching mediums are more beneficial to leaching of heavy metals in the municipal solid waste and soil with leachate. The field verification of experimental data showed that the law of heavy metal leaching in municipal solid waste revealed by the experiment has a good consistency with the data obtained by municipal solid waste landfill.     

城市垃圾焚烧残渣中阴离子的溶解性研究

通过笔者在日本研修期间所作的城市垃圾焚烧残渣中阴离子的溶解性实验,研究其在城市垃圾填埋场堆存期间无机盐类对自然环境可能产生的影响。指出要重视固体废物污染的研究和控制。     

Municipal solid waste management in Thailand and disposal emission inventory

The increasing municipal solid waste (MSW) generation along with the high fraction of organic waste and a common disposal of open dumping is the current scenario in many areas in Thailand. As a response to this problem, the country’s Pollution Control Department (PCD) aims to reduce the MSW generation rate to less than 1 kg/capita/day, increase the collection efficiency, and improve the recovery of recyclables. For many years, more than 60% of the solid waste disposal system in Thailand has been carried out by open dumping. According to the survey conducted by this study, in 2004 there were 425 disposal sites (95 landfills; 330 open dumps) in Thailand and an estimated methane emission of 115.4 Gg/year was generated based on this practice. It has been estimated that the anticipated methane emission in Thailand will rise from 115.4 Gg/year to 118.5 Gg/year if the largest open dumpsites in provinces with no existing landfill are upgraded to sanitary landfill; and it will increase to 193.5 Gg/year if the existing sanitary landfill is upgraded to integrated waste management facilities. Moreover, Bangkok metropolitan have the highest methane emission (54.83 Gg/year) among all the regions in Thailand. The methane emission forecast of 339 Gg/year by 2020 (based on LandGEM methodology) provides a stimulus to create a comprehensive plan to capture and utilize methane as an energy source.     

Application of FT-IR for assessment of the biological stability of landfilled municipal solid waste (MSW) during in situ aeration

Disposal of untreated municipal solid waste leads to gaseous emissions as well as liquid degradation products. In situ aeration is an emerging means for remediation of abandoned landfills. It aims at an accelerated mineralization and stabilization of waste organic matter and thus reduces significantly the emission potential of the site. In order to prove the success of the technique, evaluation of the biological stability of the aerated material has been suggested. Fourier Transform Infrared Spectroscopy (FT-IR) provides comprehensive information on the chemical composition of solid waste samples. Different stages of organic matter degradation are reflected by changes in the infrared spectral pattern. In the present study the feasibility of applying FT-IR for assessment of the stability of waste material derived from abandoned landfills and for in situ aeration process control was investigated. Waste samples derived in the course of pilot-scale and lab-scale aeration experiments were characterized by FT-IR (4000-400 cm(-1), KBr-technique, transmission mode) and a set of conventional parameters describing biological stability. The occurrence of distinct indicator bands was correlated with chemical and biological waste properties using 206 solid waste samples. Visual spectra interpretation was found to be appropriate in proving a reduced emission potential of initially rather reactive waste (respiration activity over 4 days (RA(4)) > 7 mg O(2) g(-1) DM) during aeration. Furthermore, cluster analysis was applied successfully to differentiate between original and aerated waste samples, even for rather stable material (RA(4) < 7 mg O(2) g(-1) DM), when visual spectra interpretation was limited.     

Characterization and pollution potential assessment of Tunceli, Turkey municipal solid waste open dumping site leachates

Environmental monitoring of leachate quality from an open municipal solid waste dumping site in Tunceli, Turkey was studied in this research. The most commonly examined pollution parameters were determined on a seasonal basis. The annual average 5-day biological oxygen demand (BOD₅) and chemical oxygen demand (COD) values of station points were measured as 70 and 425 mg/L, respectively, and also the average BOD₅/COD ratio (a measure of biodegradability) was calculated as 0.20. The low ratio of biodegradability and slightly alkaline pH values in the leachate samples indicated that the site was characterized by methanogenic conditions. The mean ammonium-nitrogen (NH₄ ⁺-N) and corresponding phosphate (orthophosphate) values were assayed as 70 and 11 mg/L, respectively. The average solids content in the leachates was measured as 4,681 mg/L (total solids) and 144 mg/L (suspended solids). Very low concentrations of iron, manganese, copper, and zinc in the leachate samples were found and the concentration of cadmium was measured below detection limits. Excessive amount of nutrients and high organic and inorganic pollutant content in the leachates pose serious pollution potential to the environment. Since no drainage system or bio treatment exists in this open dumping site, high permeability of natural soil at the site and in the surrounding area and very fractured and crackled rocks under natural soil are indicators of high groundwater pollution potential in this site.     

An assessment of cause and effect decision-making model for firm environmental knowledge management capacities in uncertainty

Environmental practices in knowledge management capability (EKMC) is a complex and uncertainty concept that is difficult to determine based on a firm’s real situation because measuring EKMC requires a set of qualitative and quantitative measurement. The objective of this study is to develop a cause and effect model in uncertainty using the fuzzy set theory and Decision Making Trial and Evaluation Laboratory (DEMATEL) method. A framework for evaluating EKMC is proposed. An approach of fuzzy linguistic is proposed to evaluate the firm EKMC. The evaluation results of EKMC obtained through the proposed approach are objective and unbiased due to two reasons. Firstly, the results are generated by a group of experts in the presence of motile attributes. Secondly, the fuzzy linguistic approach has more advantage to reduce distortion and losing of information. Through evaluating the result of EKMC, managers could judge the necessity to improve the EKMC and determine which criteria are the needed directions to improve. The managerial implication and conclusions are discussed.     

Enhanced uptake of heavy metals in municipal solid waste compost by turfgrass following the application of EDTA

Enhancement of multiple heavy metal uptake from municipal solid waste (MSW) compost by Lolium perenne L. in a field experiment was investigated with application of EDTA. EDTA was added in solution at six rates (0–30 mmol kg^???1) after 50 days of plant growth. Two weeks later, plants were harvested for the first crop and then all the turfgrasses were mowed. After another 30 days of growth, EDTA was added again at above six rates to the corresponding sites and the second crop was harvested 2 weeks later. The results showed that EDTA significantly increased heavy metal accumulation in both crops of L. perenne. For the first crop, the concentrations of Mn, Ni, Cd, and Pb in the shoots increased remarkably with increasing EDTA supply, peaked at 25 mmol kg^???1 EDTA, and shoots of 0–5 cm height (shoots from medium surface to 5 cm height) had higher metal concentrations than 5–10 cm and >10 cm shoots. The highest concentration of Mn, Ni, Cd, and Pb was 2.3-, 2.3-, 2.6-, and 3.2-fold, respectively, in 0–5 cm shoots higher than control. For the second crop, the concentrations of Mn, Cu, and Pb in shoots were, in general, less than those in the first crop. However, the second crop was significantly higher (P?< 0.05) than the first crop in dry biomass, so the total amount of metals removed by the second crop was more than the first crop. In addition, EDTA significantly increased the translocation ratios of most heavy metals from roots to shoots. For the first crop, 38% of the total Zn, 51% of Cd, 49% of Pb, 60% Mn, 55% Ni, and 45% Cu taken up by the plant was translocated in the shoots of 0–5 cm height. Turfgrass would have potential for use in remediation of heavy metals in MSW compost or contaminated soils.     

Investigation of 15-year-old municipal solid waste deposit profiles by means of FTIR spectroscopy and thermal analysis

Five profiles of a 15-year-old bank containing over three weeks composted municipal solid waste were characterized by means of different parameters habitually applied in waste management (loss on ignition, total organic carbon, total nitrogen, NH(4)-N, pH), and in addition by humic acid determination, FTIR spectroscopy and thermal analysis. Stabilization processes are revealed by humic acid contents. Over the 15 year period organic matter had developed in various ways. Highest humic acid contents were found at 0.5 m below the surface. Below 1.0-1.5 m anaerobic conditions dominated causing a strong decline of humic acid concentrations. Despite similar contents of organic matter at 0.5 m and at 3.0 m organic matter quality differed. These differences were verified by infrared spectroscopic investigations and thermal analyses (differential scanning calorimetry DSC). The spectral pattern of 15-year-old profile samples (municipal solid waste including the biogenic fraction) was compared to current municipal solid waste and abandoned landfill materials. Current municipal solid waste samples comprised different degradation stages from fresh materials to stabilized waste, suitable for landfilling according to Austrian standards. Municipal solid waste originating from abandoned landfills closed in the seventies represented stable material. Principal component analysis was performed to detect similarities and differences. It is evident that the profile samples constitute a particular group in between municipal solid waste and abandoned landfill material. Some differences can be attributed to the divergent composition of municipal solid waste in the eighties when the organic fraction was not separated. Otherwise, landfill materials from the seventies with the same composition regarding the organic fraction were deposited together with construction waste. Heat flow curves (DSC profiles) of municipal solid waste, representing different decomposition stages, illustrate the development of enthalpies and reveal the status of the profile samples. It is evident that mechanical-biological pretreatment leads to a faster stabilization of waste organic matter.     

Distribution and fractionation of cadmium, copper, lead, nickel, and zinc in a calcareous sandy soil receiving municipal solid waste

This study was conducted to evaluate the degree of mobility and fractionation of cadmium (Cd), copper (Cu), lead (Pb), nickel (Ni), and zinc (Zn) after the addition of municipal solid sewage sludge (MSS) in a sandy calcareous soil. Treatments were (1) soil application of MSS, (2) soil application of enriched municipal solid waste compost (EMSS), and (3) control soil. The MSS application represented a dose of 200 Mg dry weight per hectare. Soil columns were incubated at room temperature for 15 days and irrigated daily with deionized water to make a total of 505 mm. At the end of leaching experiments, soil samples from each column were divided into 14 layers, each being 1 cm down to 10 and 2.5 cm below that and analyzed for diethylenetriaminepentaacetic acid (DTPA)-extractable Cd, Cu, Pb, Ni, and Zn. The fractionation of the heavy metals in the top five layers of the surface soil samples was investigated by the sequential extraction method. All soil layers of the columns receiving MSS and EMSS had significantly higher concentrations of DTPA-extractable heavy metals than control soil. The maximum concentration of heavy metals in treated soil was in the surface layer and declined significantly with depth. Sequential extraction results showed that in the treated soil, a major proportion of Cd, Pb, and Ni was associated with organic matter (OM) and exchangeable (EXCH) fractions, and a major proportion of Cu and Zn was associated with residual (RES) and OM fractions. Based on relative percent, Pb, Cd, and Ni in the EXCH fraction was higher than Cu and Zn in soil leached with MSS and EMSS, suggesting that application of this MSS to a sandy calcareous soil, at the loading rate used here, may pose a risk in terms of groundwater contamination with Pb, Cd, and Ni.