Characterization of syngas produced from MSW gasification at commercial-scale ENERGOS Plants

Characterization of the syngas produced in the gasification process has been performed at commercial-scale Energy-from-Waste plants under various conditions of lambda value and syngas temperature. The lambda value from the gasification process is here defined as the ratio of the gasification air to the total stoichiometric air for complete combustion of the fuel input. Evaluation of the syngas calorific value has been performed by three different methods, i.e., estimation of the syngas calorific value from continuous in-line process measurements by mass and energy conservation equations, measurement of the syngas composition based on gas chromatography and calculation of the Gross Calorific Value from the measured composition, and direct continuous measurement of the calorific value using based on gas calorimeter.     

A multi-objective programming model for assessment the GHG emissions in MSW management

In this study a multi-objective mathematical programming model is developed for taking into account GHG emissions for Municipal Solid Waste (MSW) management. Mathematical programming models are often used for structure, design and operational optimization of various systems (energy, supply chain, processes, etc.). The last twenty years they are used all the more often in Municipal Solid Waste (MSW) management in order to provide optimal solutions with the cost objective being the usual driver of the optimization. In our work we consider the GHG emissions as an additional criterion, aiming at a multi-objective approach. The Pareto front (Cost vs. GHG emissions) of the system is generated using an appropriate multi-objective method. This information is essential to the decision maker because he can explore the trade-offs in the Pareto curve and select his most preferred among the Pareto optimal solutions. In the present work a detailed multi-objective, multi-period mathematical programming model is developed in order to describe the waste management problem. Apart from the bi-objective approach, the major innovations of the model are (1) the detailed modeling considering 34 materials and 42 technologies, (2) the detailed calculation of the energy content of the various streams based on the detailed material balances, and (3) the incorporation of the IPCC guidelines for the CH₄ generated in the landfills (first order decay model). The equations of the model are described in full detail. Finally, the whole approach is illustrated with a case study referring to the application of the model in a Greek region.     

100-year simulation of mercury emissions from landfilled stabilized mercury waste

Journal of Material Cycles and Waste Management - Owing to Minamata Convention on mercury, the final disposal of mercury in environmentally safe manners will be required. Mercury disposal in...     

Health risk assessment of air emissions from a municipal solid waste incineration plant--a case study

A health risk assessment of long-term emissions of carcinogenic and non-carcinogenic air pollutants has been carried out for the municipal solid waste incinerator (MSWI) of the city of Taranto, Italy. Ground level air concentrations and soil deposition of carcinogenic (Polychlorinated Dibenzo-p-Dioxins/Furans and Cd) and non-carcinogenic (Pb and Hg) pollutants have been estimated using a well documented atmospheric dispersion model. Health risk values for air inhalation, dermal contact, soil and food ingestion have been calculated based on a combination of these concentrations and a matrix of environmental exposure factors. Exposure of the surrounding population has been addressed for different release scenarios based on four pollutants, four exposure pathways and two receptor groups (children and adults). Spatial risk distribution and cancer excess cases projected from plant emissions have been compared with background mortality records. Estimated results based on the MSWI emissions show: (1) individual risks well below maximum acceptable levels, (2) very small incremental cancer risk compared with background level.     

The environmental fate of heavy metals arising from a MSW incineration plant

Pollutant fluxes from municipal solid waste (MSW) incinerators are of a certain concern, especially gaseous emissions from the stack, which constitute the major effluent from the plant. In this work, heavy metals in soil and vegetation sampled in different sites around the plant are compared with those found in the gaseous emissions from an incinerator: the suspected source and environmental matrices are observed together, in order to detect a possible relationship of cause and effect, using statistical methods. The incinerator examined, regarding dimension and technology, can be considered a typical Italian one. Heavy metal concentrations in soil and vegetation show a clear dependence on sampling year; similar behaviour can be found in emission fluxes referring to the same years. A dependence on the distance from the incinerator is also apparent. This study supplies a methodological approach that can be easily extended and applied to other suspected contamination sources.     

Uncontrolled methane emissions from a MSW landfill surface: Influence of landfill features and side slopes

Sanitary landfills for Municipal Solid Waste (MSW) disposal have been identified as one of the most important anthropogenic sources of methane (CH₄) emissions; in order to minimize its negative effects on the environment, landfill gas (LFG) recovery is a suitable tool to control CH₄ emissions from a landfill site; further, the measurement of CH₄ emissions can represent a good way to evaluate the effectiveness of LFG recovering systems. In general, LFG will escape through any faults in the landfill capping or in the LFG collection system. Indeed, some areas of the capping can be more permeable than others (e.g. portions of a side slope), especially when considering a temporarily capped zone (covered area that is not expected to receive any further waste for a period of at least 3 months, but for engineering reasons does not have a permanent cap yet). These areas, which are characterized by abnormal emissions, are usually defined as “features”: in particular, a feature is a small, discrete area or an installation where CH₄ emissions significantly differ from the surrounding zones. In the present study, the influence that specific features have on CH₄ emissions has been investigated, based on direct measurements carried out in different seasons by means of a flux chamber to the case study of Palermo (IT) landfill (Bellolampo). The results showed that the flux chamber method is reliable and easy to perform, and the contoured flux maps, obtained by processing the measured data were found to be a suitable tool for identifying areas with abnormal (high) emissions. Further, it was found that a relationship between methane emission rates and landfill side slope can be established. Concerning the influence of the temporary HDPE cover system on CH₄ recovery efficiency, it contributed to a significant decrease of the free surface area available for uncontrolled emissions; this aspect, coupled to the increase of the CH₄ volumes collected by the LFG recovery system, led to a significant increase of the recovery efficiency.     

Chemical characterization of emissions from a municipal solid waste treatment plant

Gaseous emissions are an important problem in municipal solid waste (MSW) treatment plants. The sources points of emissions considered in the present work are: fresh compost, mature compost, landfill leaks and leachate ponds. Hydrogen sulphide, ammonia and volatile organic compounds (VOCs) were analysed in the emissions from these sources. Hydrogen sulphide and ammonia were important contributors to the total emission volume. Landfill leaks are significant source points of emissions of H₂S; the average concentration of H₂S in biogas from the landfill leaks is around 1700 ppmv. The fresh composting site was also an important contributor of H₂S to the total emission volume; its concentration varied between 3.2 and 1.7 ppmv and a decrease with time was observed. The mature composting site showed a reduction of H₂S concentration (<0.1 ppmv). Leachate pond showed a low concentration of H₂S (in order of ppbv). Regarding NH₃, composting sites and landfill leaks are notable source points of emissions (composting sites varied around 30–600 ppmv; biogas from landfill leaks varied from 160 to 640 ppmv).Regarding VOCs, the main compounds were: limonene, p-cymene, pinene, cyclohexane, reaching concentrations around 0.2–4.3 ppmv.H₂S/NH₃, limonene/p-cymene, limonene/cyclohexane ratios can be useful for analysing and identifying the emission sources.     

Life cycle assessment of solid refuse fuel production from MSW in Korea

Solid refuse fuel (SRF) produced from waste materials is a promising fuel that can be utilized for energy recovery in industries. This study considered both characterization and weighting modeling as life cycle assessment (LCA) results. This study aimed to analyze the flows of materials and energy and to evaluate the environmental impact of SRF plants using LCA and compared them with an incineration plant. Based on the results of material and energy flow analysis, SRF products had various energy potentials depending on the treatment method of municipal solid waste (MSW) and replaced the current fossil fuels by SRF combustion. Global impacts were mainly influenced by energy consumption, especially drying methods in the production of SRF, and affected the results of the weighting analysis. The SRF plant with a bio-drying option was evaluated as the best effective practice in the weighting analysis. The LCA results in this study indicated 0.021–9.88 points according to drying methods for SRF production and 1.38 points for incineration. In the sensitivity analysis, the environmental impact of SRF production was found to be significantly affected by the drying methods for MSW and the utilization of fossil energy. Thus, improvement of the drying options could significantly reduce the environmental impact.     

Greenhouse gas emissions from MSW incineration in China: Impacts of waste characteristics and energy recovery

Determination of the amount of greenhouse gas (GHG) emitted during municipal solid waste incineration (MSWI) is complex because both contributions and savings of GHGs exist in the process. To identify the critical factors influencing GHG emissions from MSWI in China, a GHG accounting model was established and applied to six Chinese cities located in different regions. The results showed that MSWI in most of the cities was the source of GHGs, with emissions of 25–207 kg CO₂-eq t^?1 rw. Within all process stages, the emission of fossil CO₂ from the combustion of MSW was the main contributor (111–254 kg CO₂-eq t^?1 rw), while the substitution of electricity reduced the GHG emissions by 150–247 kg CO₂-eq t^?1 rw. By affecting the fossil carbon content and the lower heating value of the waste, the contents of plastic and food waste in the MSW were the critical factors influencing GHG emissions of MSWI. Decreasing food waste content in MSW by half will significantly reduce the GHG emissions from MSWI, and such a reduction will convert MSWI in Urumqi and Tianjin from GHG sources to GHG sinks. Comparison of the GHG emissions in the six Chinese cities with those in European countries revealed that higher energy recovery efficiency in Europe induced much greater reductions in GHG emissions. Recovering the excess heat after generation of electricity would be a good measure to convert MSWI in all the six cities evaluated herein into sinks of GHGs.     

Evaluation of landfill gas production and emissions in a MSW large-scale Experimental Cell in Brazil

Landfill gas (LFG) emissions from municipal solid waste (MSW) landfills are an important environmental concern in Brazil due to the existence of several uncontrolled disposal sites. A program of laboratory and field tests was conducted to investigate gas generation in and emission from an Experimental Cell with a 36,659-ton capacity in Recife/PE - Brazil. This investigation involved waste characterisation, gas production and emission monitoring, and geotechnical and biological evaluations and was performed using three types of final cover layers. The results obtained in this study showed that waste decomposes 4-5 times faster in a tropical wet climate than predicted by traditional first-order models using default parameters. This fact must be included when considering the techniques and economics of projects developed in tropical climate countries. The design of the final cover layer and its geotechnical and biological behaviour proved to have an important role in minimising gas emissions to the atmosphere. Capillary and methanotrophic final cover layers presented lower CH₄ flux rates than the conventional layer.     

生活垃圾焚烧发电厂二恶英对人体健康的风险评价

介绍了生活垃圾焚烧过程中二恶英的产生机理、对人体的危害及控制措施,以某生活垃圾焚烧发电厂环境影响评价为例,提出了二恶英对人体健康风险评价方法,同类项目环境影响评价提供借鉴。     

Characterization of PCDD/Fs and heavy metals from MSW incineration plant in Harbin

The characterization of PCDD/Fs and heavy metals in the flue gas and fly ash of Harbin municipal solid waste (MSW) incineration plant, located in the northeast of China, was investigated in this study. The MSW was treated in a twin internal fluidized (TIF) bed incinerator. The results indicate that the emission of PCDD/Fs into the environment is 0.02 ng I-TEQ/m3 and the level of PCDD/Fs in the fabric filter fly ash is 0.7982 ng I-TEQ/g. The leachability levels of Pb, Cd and Hg in the fly ash are below the limits of environmental protection standard in China. However, the contents of Cu, Zn, and Hg are high in the fly ash. This suggests that the fly ash is a hazardous waste that requires special treatment and disposal. The practice of more than four years of operation shows that the TIF bed incinerator is very suitable and practical for China.     

Fiberboard plant emissions control using a silent discharge plasma

A silent discharge plasma reactor was constructed to test a potential industrial application for controlling volatile organic carbon emission from fiberboard manufacturing plants. The reactor consisted of a cylindrical single barrier dielectric barrier discharge cell connected to a high‐voltage ac power supply. Various concentrations of turpene in air were introduced into the reactor under dry and wet conditions. The destruction removal efficiencies (DRE) were monitored using a gas chromatograph mass spectrometer (GCMS) and the concentrations of carbon dioxide generated from the oxidation ofturpene were monitored using a Fourier Transform Infrared Spectrometer (FTIR). It was found that 90 percent of the turpenes could be removed at modest energy densities and that adding water to the gas mix greatly enhanced the destruction of the turpenes. However, even at high energy densities, the oxidation of turpenes did not completely form carbon dioxide. The results suggest that the Silent Discharge Plasma (SDP) system can be used to control the emission of volatile organic compounds (VOCs) from fiberboard plants, but that further testing is needed to limit the emission of carbon monoxide.     

Development of waste gasification and gas reforming system for municipal solid waste (MSW)

To achieve both high-efficiency power generation and high detoxification performance, advanced-type waste power generation plants such as pyrolysis and gas reforming plants are suggested. Further surveys on actual operational data of these plants are required in terms of reliability of the system when it is introduced to waste disposal sites. To verify the technical effectiveness of advanced-type waste power generation using the pyrolysis and gas reforming method, we evaluated 10?tons/day of municipal solid wastes (MSW) treated in a demonstration plant. A demonstration test was conducted over 100?days including 35?consecutive days of operation treating MSWs. The test results show high recycling performance and harmless nature of the plant which proves it to be an excellent waste recycling system. Major test results are as follows: (1) stabilization of waste treatment is possible with the wastes of various qualities, (2) clean gas is produced from the waste whose energy recovery ratio is approximately 40?%. (3) 99.3?% weight % of dried waste are recovered as valuable materials such as clean gas, char and metal, (4) total amount of dioxin emission to the outside of the plant is very small, down to 0.0051–0.018?μg?TEQ per ton waste.     

Environmental policy and legal framework for controlling mercury emissions from stationary sources: a case study in Taiwan

Journal of Material Cycles and Waste Management - In recent years, the Taiwan government partnered with the U.S. Environmental Protection Agency (USEPA) Global Mercury Partnership program to follow...     

Catalytic gasification of tars from a dumping site

The work deals with catalytic gasification, pyrolysis and non-catalytic gasification of tar from an industrial dumping site. All experiments were carried out in a vertical stainless steel gasification reactor at 800 °C. Crushed calcined dolomite was used as the gasification catalyst. Parameters such as addition of water and air, and the influence of the catalyst in regard to the composition of the process gas were investigated. The catalytic gasification experiment in the steady state produced process gas with the composition: 56 % of H₂, 9 % of CO, 11 % of CH₄ and 12 % of CO₂ (mol.%). Concentration of the C₂ fraction was lower than 1 mol.%. Volume flow of air was later changed from 120 to 230 ml min^?1 reducing the amount of hydrogen to 51 mol.% and that of methane to 10 mol.%. Process gas created in a non-catalytic gasification process contained 26–30 mol.% of methane, 13–15 mol.% of carbon monoxide and 15–17 mol.% of the C₂ fraction and lower amounts of hydrogen (20 mol.%) and carbon dioxide (2–3 mol.%). The highest apparent conversion of tar was reached in the catalytic gasification processes. A higher rate of catalyst deactivation can be observed when water or air is not added.     

A methodology to determine gaseous emissions in a composting plant

Environmental impacts associated to different waste treatments are of interest in the decision-making process at local, regional and international level. However, all the environmental burdens of an organic waste biological treatment are not always considered. Real data on gaseous emissions released from full-scale composting plants are difficult to obtain. These emissions are related to the composting technology and waste characteristics and therefore, an exhaustive sampling campaign is necessary to obtain representative and reliable data of a single plant. This work proposes a methodology to systematically determine gaseous emissions of a composting plant and presents the results obtained in the application of this methodology to a plant treating source-separated organic fraction of municipal solid waste (OFMSW) for the determination of ammonia and total volatile organic compounds (VOC). Emission factors from the biological treatment process obtained for ammonia and VOC were 3.9 kg Mg OFMSW⁻¹ and 0.206 kg Mg OFMSW⁻¹ respectively. Emissions associated to energy use and production were also quantified (60.5 kg CO₂ Mg OFMSW⁻¹ and 0.66 kg VOC Mg OFMSW⁻¹). Other relevant parameters such as energy and water consumption and amount of rejected waste were also determined. A new functional unit is presented to relate emission factors to the biodegradation efficiency of the composting process and consists in the reduction of the Respiration Index of the treated material. Using this new functional unit, the atmospheric emissions released from a composting plant are directly related to the plant specific efficiency.     

燃煤电厂汞排放分析及控制技术研究

新的《火电厂大气排放标准》的颁布实施,燃煤电厂汞的排放正式纳入控制标准。针对目前我国燃煤电厂汞排放化学形态转换、排放特征,分析和总结现有污染控制设施对汞协同控制效果,提出适合我国国情的燃煤电厂汞控制技术措施的建议及发展趋势,可有效控制燃煤电厂汞的排放量。     

燃煤电厂汞排放及其控制技术研究

燃煤电厂汞排放是最大的人为汞污染源,《火电厂大气污染物排放标准》(GB 13223-2011)首次提出了我国燃煤发电锅炉汞及其化合物的控制指标,规定汞及其化合物排放限值为0.03 mg/m3.介绍了国内外汞污染发展情况,汞的形态以及汞污染控制技术.汞控制技术主要分为三种:燃烧前脱汞、燃烧中脱汞和燃烧后脱汞,其中燃烧后脱汞的研究最广泛.