Assessment of microbiological and parasitological quality of composted wastes: health implications and hygienic measures.

Feedstock and compost samples were collected from twenty composting plants and analysed from the microbiological point of view. Faecal indicator organisms were determined in order to evaluate the efficacy of processes for the removal of pathogenic micro-organisms with similar survival characteristics and to verify their suitability as appropriate markers of microbial quality of composted products. In addition to the classical bacterial indicators, selected organisms, such as Salmonella, Giardia, Cryptosporidium, Clostridium spores and helminth ova, were investigated. Statistically significant differences in the removal of the different micro-organisms were observed with regard to both the different composting plants (P < 0.05) and feedstock composition (P < 0.05). In fact, compost obtained by feedstock containing sewage sludge was shown to have a better hygienic quality in comparison with compost containing green discards and municipal solid waste as raw matter. Giardia cysts, Cryptosporidium oocysts and helminth ova were not effective indicators of hygienic quality of compost, whereas Clostridium perfringens spores, because of their high resistance to treatments, could be considered as an additional model for assessing the composting process, especially with regard to more resistant pathogen reduction.     

Solidification and stabilization of hazardous wastes using geopolymers as sustainable binders

Journal of Material Cycles and Waste Management - Solidification/stabilization (S/S) of hazardous waste using cement for immobilization of contaminants has been recognized as Best Demonstrated...     

Evaluation of buckwheat and barley tea wastes as ethanol fermentation substrates

Buckwheat tea waste (BWTW) and barley tea waste (BTW), by-products of the beverage industry, are alternative carbohydrate sources for ethanol production. In this study, optimal enzyme loading for enzymatic saccharification of BWTW and BTW was determined, and simultaneous saccharification and fermentation (SSF) was performed by Saccharomyces cerevisiae and Mucor indicus to produce ethanol. Optimal enzyme loading for enzymatic saccharification of 2?% w/v BWTW and BTW was 0.5?% (weight of enzyme/weight of tea wastes) for BWTW and 0.1?% for BTW. Ethanol production from BWTW by S. cerevisiae and M. indicus after 48?h of SSF was 49.9/100?g of BWTW and 47.9/100?g of BWTW, respectively, with 0.5?% enzyme loading. Ethanol production from BTW by S. cerevisiae and M. indicus after 48?h of SSF was 20.5/100?g of BTW and 21.6/100?g of BTW, corresponding to 62 and 66?% of the theoretical yield based on starch content, respectively, with 0.1?% of enzyme loading. Furthermore, S. cerevisiae produced 76?% of the theoretical yield based on the total glucose from starch in BWTW and BTW when a mixture of BWTW and BTW was used as a substrate, with 0.2?% enzyme loading and no additional nitrogen or mineral sources.     

Evaluation of fruit-vegetable and fish wastes as alternative feedstuffs in pig diets

Fruit-vegetable and fish wastes were evaluated as potential feedstuffs for growing-finishing pigs. Wastes were collected from shops in the city of Salamanca (Spain) and their nutritional composition, mineral content and digestibility were determined. The dry matter of the wastes under study was relatively low (12% for fruit-vegetable waste and 26% for fish waste), but they presented all of the nutrient requirements for swine diets. The fish waste contained 58% crude protein, 22% ash, 19% ether extract and 1% crude fibre, whereas the fruit-vegetable waste contained 65% nitrogen free extract, 13% crude fibre, 12% crude protein, 8% ash and 2% ether extract. Waste digestibility decreased with temperature, and hence temperatures over 65 degrees C for fruit-vegetable waste and 105 degrees C for fish waste should not be used in the treatment to reduce the moisture and to ensure the microbiology quality. Therefore, two diets were formulated using linear programming. The analysed waste was included in approximately 20% of one of the diets, while another diet was formulated without any type of waste. These data showed that this part of biodegradable municipal waste could be managed as alternative feedstuffs in swine diets, reducing the amount of biodegradable municipal waste going to landfills.     

Land disposal of mixed human and animal wastes: A review

Combining septic tank effluent and animal wastes (mixed wastes) for eventual application to land is being proposed as an alternative wastewater disposal system. Both types of waste are spread on land separately, and private practice may be to mix and spread them together, but in most of the United States mixing of these wastes for land disposal is illegal. No research has been done to assess the hazards associated with spreading mixed wastes on land. The concern is with the impact on public health of adding septic tank effluent to animal wastes for disposal as animal wastes. The effects of pathogens already present in animal waste are presumably allowed for in current U.S. regulations.Pathogens in mixed wastes include viruses, bacteria and parasites. Viruses are not always present in on-site waste disposal systems, but when present are in high numbers. Most viral particles will pass through the septic tank and will remain viable. Transmission will be prevented if these particles are retained in soil or other solids until any of several factors deprive them of infectivity. As animals are the chief reservoir of most enteric bacteria that are pathogenic to man, no additional hazards from bacteria are expected in a mixed waste system. Some parasite eggs and cysts will settle into the bottom of the septic tank, but significant numbers will pass through and will remain viable. Retention with solids will minimize transmission through food and water. In all instances it is important to match land use and waste disposal carefully.     

Co-disposal of hazardous and municipal wastes in landfills: Experimental work

During the past 15 years considerable research has taken place in the U.K. to investigate the decomposition processes occurring within municipal waste landfills. This, in turn, has led to a better understanding of the environmental fate of many industrial wastes currently, or formerly, co-disposed with municipal refuse. Codisposal is defined in this paper as the disposal of chemical wastes in an admixture with domestic waste so that full advantage is taken of the attenuation and biochemical processes operating within a landfill to reduce the environmental impact to an insignificant level. Central to this philosophy is the maintenance of a balanced input of different wastes to ensure that attenuation and degradation processes are not overwhelmed. It is contended that co-disposal is an effective disposal option for a wide range of industrial wastes at correctly sited and well managed landfills.Co-disposal research findings for three selected industrial waste types are presented and related to the scientific basis for the prohibition, or continuation of their disposal to landfills.     

Assessing generated quantities of infectious medical wastes: A case study for a health region administration in Central Macedonia,Greece

In the present study, the quantities of infectious medical wastes, generated from 12 public hospitals supervised by the 2nd Health Region Administration of Central Macedonia, Northern Greece, were calculated at a very disaggregated level for the first time and were compared to other reported characterization studies. Data was recorded by using an appropriately designed questionnaire, which was completed for each day of one week, in every department, clinic, unit or laboratory of each one of the 12 aforementioned hospitals. Afterwards, average generation indexes were determined in relation to certain important organizational and functional factors, such as the number of beds, bed coverage, the different hospital sections and wards, and the type of hospital. The way that sources of infectious wastes, generated from hospitals, vary by ward and department, was also illustrated and the most important sources were identified. Generated infectious hospital wastes vary from 0.26 to 0.89 kg/bed/day or 0.51 to 1.22 kg/patient/day, excluding the three specialised hospitals of the Health Region. The total amount of medical waste generated from the 2nd Health Region (only public hospitals) was estimated to be 691 tonnes/yr or 0.73 kg/cap/yr.     

Construction demolition wastes, Waelz slag and MSWI bottom ash: a comparative technical analysis as material for road construction

The objective of the study is to analyze the technical suitability of using secondary materials from three waste flows (construction and demolition waste (CDW), Waelz slag and municipal solid waste incineration (MSWI) bottom ash), under the regulations and standards governing the use of materials for road construction. A detailed technical characterization of the materials was carried out according to Spanish General Technical Specifications for Road Construction (PG3). The results show that Waelz slag can be adequate for using in granular structural layers, while CDW fits better as granular material in roadbeds. Likewise, fresh MSWI bottom ash can be used as roadbed material as long as it does not contain a high concentration of soluble salts. This paper also discusses the adequacy of using certain traditional test methods for natural soils when characterizing secondary materials for use as aggregates in road construction.     

Thermal decomposition of electronic wastes: mobile phone case and other parts

Pyrolysis and combustion runs at 850°C in a horizontal laboratory furnace were carried out on different parts of a mobile phone (printed circuit board, mobile case and a mixture of both materials). The analyses of the carbon oxides, light hydrocarbons, polycyclic aromatic hydrocarbons (PAHs), polychlorodibenzo-p-dioxin, polychlorodibenzofurans (PCDD/Fs), and dioxin-like PCBs are shown. Regarding semivolatile compounds, phenol, styrene, and its derivatives had the highest yields. In nearly all the runs the same PAHs were identified, naphthalene being the most common component obtained. Combustion of the printed circuit board produced the highest emission factor of PCDD/Fs, possibly due to the high copper content.     

Extraction of keratin from keratinous wastes: current status and future directions

Journal of Material Cycles and Waste Management - This review aims to trace the developments of keratin extraction techniques over the last 70&nbsp;years and possibilities for future research....     

Molecular composition of recycled organic wastes,as determined by solid-state 13C NMR and elemental analyses

Using solid state ¹³C NMR data and elemental composition in a molecular mixing model, we estimated the molecular components of the organic matter in 16 recycled organic (RO) wastes representative of the major materials generated in the Sydney basin area. Close correspondence was found between the measured NMR signal intensities and those predicted by the model for all RO wastes except for poultry manure char. Molecular nature of the organic matter differed widely between the RO wastes. As a proportion of organic C, carbohydrate C ranged from 0.07 to 0.63, protein C from <0.01 to 0.66, lignin C from <0.01 to 0.31, aliphatic C from 0.09 to 0.73, carbonyl C from 0.02 to 0.23, and char C from 0 to 0.45. This method is considered preferable to techniques involving imprecise extraction methods for RO wastes. Molecular composition data has great potential as a predictor of RO waste soil carbon and nutrient outcomes.     

Correction to: Advanced fabrication and multi-properties of aluminium hydroxide aerogels from aluminium wastes

Journal of Material Cycles and Waste Management - A correction to this paper has been published: https://doi.org/10.1007/s10163-021-01211-w     

Classification of in-flight catering wastes in Egypt air flights and its potential as energy source (chemical approach)

Waste to energy conversion is based on the classification of waste. In-flight catering wastes resulting from Egypt Airlines economy class passengers were classified. The solid waste stream generated contains plastic, paper, left-over waste food and aluminum. The type of meal served varies according to the period of flight and so the quantity and content of the waste stream. It was found that the waste generation rate varied from 61.3 to 265 g according to the meal type. Breakfast snack meal generates the highest weight of waste which recorded an average of 265 g. Plastic waste generated varied from 39.6% to 64.6% by weight for the various types of meals served. A total amount of 725 tons were generated annually from organic waste (paper, plastic and food waste) among which a non combustible 39.4 tons of aluminum. The calorific value for each generated item is calculated and the total energy potential reached up to 14.3 TJ annually.     

Household disposal of pharmaceuticals: attitudes and risk perception in a UK sample

Pharmaceuticals can enter the environment through disposal in toilets, sinks and general waste. In the UK, household medicines are correctly disposed of by returning them to a pharmacy. This study examined household patterns of medicine waste, storage and disposal practices via a cross-sectional survey with 663 UK adults. Multiple regression was used to explore the contribution of key variables on self-reported medicines disposal behaviour. Analysis demonstrated that age, information, awareness, probability, attitude and intention all predicted correct disposal behaviour. Results indicate that multiple factors influence different disposal destinations uniquely. Affect and age increase disposal in sink/toilet but reduce disposal in bin. Presence of children increase bin and sink/toilet disposal but decrease pharmacy returns. Awareness and received information on correct disposal reduce bin disposal and increase pharmacy returns. The results suggest people use different mental models for each destination with disposal in sink/toilets and bins considered quicker and safer in the presence of children or for those feeling anxious. It is important to understand the capability, opportunity and motivation people have to return medicines to the pharmacy in addition to raising awareness of correct medicine disposal.

     

Solid-state bioconversion of organic wastes into compost as bio-organic fertilizer by screened fungal isolates and its performance in agronomic usage

Journal of Material Cycles and Waste Management - Rejuvenation of composting of organic wastes (OW) by application of useful potential microbes is an emerging science of solid waste management....     

Recycling of organic wastes in burnt soils: combined application of poultry manure and plant cultivation

A pot experiment was conducted to investigate the efficacy of a post-fire land management practice, including plant cultivation (Lolium perenne) combined with poultry manure addition, for restoring the protective vegetation cover in soils degraded by high intensity wildfires. The greenhouse experiment was performed with three burnt pine forest soils with added poultry manure at two doses of application and comparing the data with those obtained using NPK fertilizer. A significant effect of the amendment, soil properties and the interaction between amendment and soil properties on vegetation cover (phytomass production, nutrient content) was detected, but often the amendment treatment explained most of the variance. Changes induced by the organic amendment were more marked than those induced by inorganic fertilization. The increase of phytomass and nutrient uptake with poultry manure addition indicated the beneficial effects of this soil management practice. These findings can serve to develop field experiments and burnt soils reclamation technology.     

Management of agricultural biomass wastes: Preliminary study on characterization and valorisation in clay matrix bricks

In this work the feasibility of using woody agricultural biomass wastes as grapes and cherries seeds, sawdust, as pore forming agent, and sugar cane ash, as silica precursor, in bricks, were reported.Sawdust and grapes and cherries seeds, thanks to their organic substances content, during their combustion, bring an energetic support in the bricks firing phase and act as pore forming agent. Usually the addition of this kind of waste is limited to 10 wt.% in order to reach an equilibrium between positive (weight and shrinkage decrease and porosity increase) and negative (increase of water absorption and mechanical resistance decrease) effects. The results show that grapes and cherries seeds, added in a percentage of 5 wt.% to a brick formulation, have better influence with respect to the sawdust, maintaining the mechanical properties of the fired brick (950 °C), showing modulus of rupture around 21–23 MPa with a weight reduction of 3–10% (respect to the standard one). Regarding the sugar cane ash, the addition of 5 wt.% improves the mechanical properties (modulus of rupture around 27 MPa) and no weight decrease is observed. These results confirmed the role played by this kind of agricultural waste, which thanks to its high silica content (61 wt.%) is capable to demonstrate a filler and plasticity reducing effect on the brick bodies. Tests carried out highlighted that the addition of these by-products (5 wt.%) do not change negatively the main technological properties measured (water absorption, linear shrinkage, flexural resistance, etc.) and permit to hypothesize their use to obtain bricks with both insulating and higher mechanical properties using a pore agent forming or silica carrier alternative raw materials, respectively.