Impact of cadmium and nickel on ion homeostasis in the yeast Schizosaccharomyces pombe

Abstract

Toxicity of heavy metals to living organisms is a worldwide research topic. Although, much has been discovered about cadmium and nickel impact on biological systems, a lot still remains unclear. We used inductively coupled plasma – optical emission spectroscopy to address the question of the effect of two different heavy metals nickel, and cadmium on intracellular ion balance. Increase or decrease of the content of several essential cations including Ca²⁺, Na⁺, K⁺, Mg²⁺, Cu²⁺, Fe³⁺ in the yeast Schizosaccharomyces pombe was determined. Our results revealed that the cell exposure to high nickel and cadmium concentrations led to significant elevation of Ca²⁺, Na⁺, Mg²⁺, Cu²⁺, Fe³⁺ levels in the yeast cell, while the content of K⁺ decreased. Correlation analyses showing in the presence of nickel and cadmium strong positive correlation among each tested element (Ca²⁺, Na⁺, Cu²⁺, Mg²⁺ and Fe³⁺) except for K⁺, demonstrate the significant impact of heavy metal treatment to ion homeostasis of the cell. Our data indicate that acute nickel and cadmium contamination leads to substantial ionome misbalance in yeast.     

Sampling and chemical analysis of ice crystals as a function of size

Size-classified ice crystal samples were collected during the Spring of 1998, at the Jungfraujoch High-Alpine Research Station (3454 m), located in Switzerland. A procedure modified from the Guttalgor method, originally developed for size-selective sampling of raindrops by Bächmann et al. (Atmos. Environ. 26A (1992) 1795) was used to sample ice crystals during precipitation events. The size-classified ice crystal samples were analyzed using ion chromatography to determine the concentrations of Na⁺, NH₄⁺, K⁺, Ca²⁺, Mg²⁺, Cl⁻, NO₃⁻, and SO₄²⁻ in each size class. For ions associated with coarse mode aerosol, Na⁺, K⁺, Ca²⁺, Mg²⁺, and Cl⁻, concentration increased with decreasing ice crystal size, suggesting scavenging by nucleation. For the remaining ions, mixed behavior was observed suggesting a combination of gas phase scavenging and scavenging via riming.     

Cadmium (Cd2+) removal by nano zerovalent iron: surface analysis, effects of solution chemistry and surface complexation modeling

Nano zerovalent iron (nZVI) is an effective remediant for removing various organic and inorganic pollutants from contaminated water sources. Batch experiments were conducted to characterize the nZVI surface and to investigate the effects of various solution properties such as pH, initial cadmium concentration, sorbent dosage, ionic strength, and competitive ions on cadmium removal by nZVI. Energy-dispersive X-ray and X-ray photoelectron spectroscopy results confirmed removal of Cd²⁺ ions by nZVI through adsorption. Cd²⁺ adsorption decreased in the presence of competitive cations in the order: Zn²⁺?>?Co²⁺?>?Mg²⁺?>?Mn²⁺?=?Cu²⁺?>?Ca²⁺?>?Na²⁺?=?K⁺. Higher concentrations of Cl^? significantly decreased the adsorption. Cadmium removal increased with solution pH and reached a maximum at pH 8.0. The effects of various solution properties indicated Cd²⁺ adsorption on nZVI to be a chemisorption (inner-sphere complexation) process. The three surface complexation models (diffuse layer model, constant capacitance model, and triple layer model) fitted well to the adsorption edge experimental data indicating the formation of nZVI–Cd bidentate inner-sphere surface complexes. Our results suggest that nZVI can be effectively used for the removal of cadmium from contaminated water sources with varying chemical conditions.     

Water soluble ions of atmospheric aerosols in three New Zealand cities: seasonal changes and sources

The results of one year's measurements (typically a two week sampling campaign in each season) of the concentrations of eight major water soluble ions, namely Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, Cl⁻, NO₃⁻ and SO₄²⁻, in atmospheric aerosols collected in three New Zealand cities (Auckland, Christchurch and Hamilton) are presented. The data has provided important information on particulate soluble ion profiles in New Zealand urban areas and revealed some useful trends.A significant correlation has been found between the average meteorological conditions in a sampling campaign and the average particulate concentrations of some of these soluble ions in the campaign. For example, average particulate NO₃⁻ concentration in a campaign was found to correlate well with the average calm or weak wind duration percentage in the campaign, and the average concentrations of Na⁺, Mg²⁺ and Cl⁻ related closely to the average wind pattern and rainfall in the campaign.Significant site and seasonal variations have been observed with Hamilton having the lowest overall concentrations of all the soluble ions in the particles sampled. On average all sites had the highest particulate concentrations of Na⁺, Mg²⁺ and Cl⁻ in the summer but the highest particulate concentrations of NH₄⁺ and non-sea-salt Ca²⁺ (nss-Ca²⁺) in the winter. The possible sources of PM₁₀ mass have been deduced and in particular the relative contribution of sea salts to PM₁₀ mass in the cities are reported.     

Dry deposition and internal circulation of nitrogen,sulphur and base cations to a coniferous forest

The dry deposition of sulphur, nitrogen and base cations to a spruce stand was estimated during a five year period using a surrogate surface resembling needles, throughfall and bulk deposition measurements. The deposition was calculated from the ratio between the deposition of an ion and sodium on the surrogate surface and the net throughfall of sodium to the forest. The dry deposition represented a large fraction of the total atmospheric input of base cations. For Na⁺, Mg²⁺, Ca²⁺, and K⁺ they were 66, 67, 53 and 42%, respectively. The internal circulation was 95% of non-marine net throughfall fro K⁺ and 76% for Ca²⁺. The dry deposition of SO₂ to the canopies regulates the internal circulation of Ca²⁺. The dry deposition of SO₂ to the canopies regulates the internal circulation of Ca²⁺. The dry depositions of ammonium and nitrate are close to the net throughfall of Kjeldahl-N and nitrate, respectively. The obtained deposition velocities are comparable to other studies. The calculated dry deposition of ammonium was compared to the net throughfall of ammonium at three nearby forest stands receiving different ammonium amounts on the soils. No correlation to nitrogen level was found, but most ammonium was lost and converted to organic nitrogen in the canopies of the wettest forest stand.     

Characterization of carbonic anhydrase II from Chlorella vulgaris in bio-CO2 capture

Carbonic anhydrase II (CA II) can catalyze the reversible hydration reaction of CO₂ at a maximum of 1.4?×?10⁶ molecules of CO₂ per second. The crude intracellular enzyme extract containing CA II was derived from Chlorella vulgaris. A successful CO₂ capture experiment with the presence of calcium had been conducted on the premise that the temperature was conditioned at a scope of 30?C40?°C, that the biocatalyst-nurtured algal growth period lasted 3?days, and that pH ranged from7.5 to 8.5. Ions of K⁺, Na⁺, Ca²⁺, Co²⁺, Cu²⁺, Fe³⁺, Mg²⁺, Mn²⁺, and Zn²⁺ at 0.01, 0.1, and 0.5?M were found to exhibit no more than 30?% inhibition on the residual activity of the biocatalyst. It is reasonable to expect that calcification catalyzed by microalgae presents an alternative to geological carbon capture and sequestration through a chain of fundamental researches carried on under the guidance of sequestration technology.     

Solubilization properties of polycyclic aromatic hydrocarbons by saponin, a plant-derived biosurfactant

The enhanced solubilization of polycyclic aromatic hydrocarbons (PAHs) by saponin, a plant-derived non-ionic biosurfactant, was investigated. The results indicated that the solubilization capabilities of saponin for PAHs were greater than some representative synthetic non-ionic surfactants and showed strong dependence on solution pH and ionic strength. The molar solubilization ratio (MSR) of saponin for phenanthrene was about 3-6 times of those of the synthetic non-ionic surfactants, and decreased by about 70% with the increase of solution pH from 4.0 to 8.0, but increased by approximately 1 times with NaCl concentration increased from 0.01 to 1.0 M. Heavy metal ions can enhance saponin solubilization for phenanthrene and the corresponding MSR values increased by about 25% with the presence of 0.01 M of Cd²⁺ or Zn²⁺. Saponin is more effective in enhancing PAHs solubilization than synthetic non-ionic surfactants and has potential application in removing organic pollutants from contaminated soils.     

Influence of meteorological factors and polluting environment on rain chemistry and wet deposition in a rural area near Chimay,Belgium

This paper focuses on a detailed analysis of the effects of meteorological factors explaining the variability of rain composition.Inorganic composition of 113 individual rain events was measured from May 2002 to October 2005 at a rural site near Chimay, in the western part of the Belgian Ardennes. Original models were fitted for each studied ion (H⁺, Mg²⁺, Ca²⁺, K⁺, NH₄⁺, Na⁺, Cl⁻, NO₃⁻ and SO₄²⁻) to relate rain event concentration or wet deposition to the rainfall volume (R), the length of the antecedent dry period (ADP), the volume of the previous event (R_prev) as well as to the mean wind speed and the prevailing wind direction during both the dry and the rainy periods. These variables explained from 32% (H⁺) to 69% (NO₃⁻) of rain concentration variability. Concentrations decreased logarithmically with increasing R values except in case of H⁺ for which a positive effect of rain volume on rain concentration was observed. ADP affected positively rain concentrations of all ions excluding K⁺ and H⁺ for which, respectively, a nonsignificant and a negative effect of this variable was observed. Increasing R_prev strengthened the effect of the variable R on H⁺, Mg²⁺, Ca²⁺, Na⁺, NH₄⁺ and SO₄²⁻ concentrations while it softened the effect of ADP on NO₃⁻ concentrations. Wind speed and direction during dry and rainy periods explained together from 8% (K⁺) to 38% (Na⁺) of rain concentration total variability. R² coefficients of the wet deposition models ranged from 0.51 (K⁺) to 0.79 (SO₄²⁻). For all ions, wet deposition increased significantly with increasing R values while the effects of the other variables were similar to those on concentrations. Wind conditions during dry and rainy periods explained from 4% (H⁺) to 24% (Na⁺) of wet deposition total variability. On an annual scale, the total dry period duration, the total rainfall volume as well as the shape of the distributions of the length of the antecedent dry periods and of the rain event volume are important parameters that influence annual wet deposition.     

Separate chemical characterizations of fog water,aerosol, and gas before,during, and after fog events near an industrialized area in Japan

Fog water, aerosol, and gas were separately collected at Mt. Rokko (altitude 931 m) in Kobe, Japan, using a new sampling method at a mountainous site near a highly industrialized area. The fog water was collected by an active string-fog collector and the aerosol and gas by using the filter pack method. Using plural filter packs and controlling or switching the airflow before, during, and after a fog event made it possible to collect the fog water, aerosol, and gas separately. Nitrate species such as NO₃⁻(p) and HNO₃(g) were effectively scavenged by fog water, while sulfur species such as SO₄²⁻(p) and SO₂(g) could not be easily and effectively scavenged because of the poor solubility of SO₂(g). This difficulty was experimentally examined through an in situ investigation. Ion species (especially Na⁺(p) and Ca²⁺(p)) which form coarse particles were easily and effectively scavenged by fog water. On the other hand, the difficulty of scavenging Mg²⁺(p) could not be explained by particle size.     

Base cation deposition in europe-part I. Model description, results and uncertainties

Deposition of base cations (Na⁺, Mg²⁺, Ca²⁺, K⁺) in Europe was mapped for 1989 with a spatial resolution of 10 x 20 km using the so-called inferential modeling technique. Deposition fields resembled the geographic variability of sources, land-use and climate. Dry deposition constituted on average 45% of the total base cation deposition in Europe. Modeled deposition estimates compared reasonably well with deposition estimates derived from throughfall and bulk-precipitation measurements made at 174 sites scattered over Europe. Using error propagation, the random and systematic error in total deposition for an average grid cell of 10 x 20 km was estimated to equal 35–50% and 25–40%, respectively. Within individual grids a relatively large variability in deposition is expected.     

Two-stage chemical fractionation method for the analysis of elements and non-volatile inorganic ions in PM10 samples: Application to ambient samples collected in Rome (Italy)

A two-stage micro-analytical scheme for the determination of metals and ions in atmospheric particulate matter collected on only one Teflon filter was developed. In the first stage the collected particles are chemically fractionated for their solubility in a pH-buffered extracting solution; in the second stage the residue is mineralised. The major non-volatile inorganic ions (Cl⁻, NO₃⁻, SO₄²⁻, Na⁺, NH₄⁺, Ca²⁺, Mg²⁺) are determined in the first fraction by ion-chromatography (IC), while metals and metalloids (Al, As, Cd, Cr, Cu, Fe, Mg, Mn, Ni, Pb, S, Sb, Se, Si, Ti, V, Zn) are determined in both the acetate extractable and the mineralised residual fractions by inductively coupled plasma optical emission spectroscopy (ICP-OES).The procedure was applied to ambient 24-h PM₁₀ samples collected on Teflon filters during two field campaigns carried out at two sites in the area of Rome (Italy). The variations in the chemical composition of the collected particles during the two periods were interpreted in the light of the dilution properties of the lower atmosphere and of the back-trajectories of the air masses. The difference in the results between the two locations was interpreted in the light of their proximity to the emission sources. It was found that the acetate extractable and the mineralised residual fraction of some metals exhibit a different temporal pattern, suggesting the existence of different emission sources of the two fractions.     

Association between ionic composition of fine and coarse aerosol soluble fraction and peak expiratory flow of asthmatic patients in São Paulo city (Brazil)

Air pollutants are associated with adverse respiratory effects mainly in susceptible groups. This study was designed to assess the impact of the ionic composition of particulate matter on asthmatic respiratory functions in São Paulo city. From May to July 2002, fine and coarse particulate matter fractions were collected and their respective chemical composition with respect to major ions (Na⁺, Mg²⁺, K⁺, Ca²⁺, NH₄⁺, Cl⁻, NO₃⁻ and SO₄²⁻) were determined in each aqueous-extract fraction. The results showed predominant concentrations of SO₄²⁻ (48.4%), NO₃⁻ (19.6%) and NH₄⁺ (12.5%) in the fine fraction, whereas NO₃⁻ (35.3%), SO₄²⁻ (29.1%), Ca²⁺ (13.1%) and Cl⁻ (12.5%) were the predominant species in the coarse fraction. The association between the chemical components of both fractions and the daily peak expiratory flow (PEF) measurements (morning and evening) of the 33 asthmatic individuals were assessed through a linear mixed-effects model. The results showed a significant negative correlation (decrease of PEF) between morning PEF and coarse chloride (3-day moving average) and between evening PEF and coarse Na⁺ (3-day moving average), coarse Mg²⁺ (3-day moving average) and coarse NH₄⁺ (2- and 3-day moving average). A significant negative correlation has also been observed between morning and evening PEF and Mg²⁺ in the fine fraction. These results suggest that some particle chemical constituents may increase the responsiveness of airways and that coarse particles that deposit in the upper airways may be more relevant for asthmatic response and irritation. However, the results do not prove a clear causal relationship.     

Rapid dye degradation with reactive oxidants generated by chloride-induced peroxymonosulfate activation

Transition-metal is known to catalyze peroxymonosulfate (PMS) decomposition to produce sulfate radicals. Here we report reactions between PMS and chloride, without a need of transition metals, also can be used to degrade organic dye pollutant (Rhodamine B, (RhB)). Some important operating parameters, such as dosages of PMS and Cl^?, pH of solution, temperature, ionic strength, and several common cations, were systematically investigated. Almost complete decoloration of RhB was achieved within 5 min ([PMS]?=?0.5 mM, [Cl^?]?=?120 mM, and pH 3.0), and RhB bleaching rate increased with the increased dosages of both PMS and chloride ion, following the pseudo-first-order kinetic model. However, the total organic carbon (TOC) removal results demonstrated that the decoloration of RhB was due to the destruction of chromophore rather than complete degradation. RhB decoloration could be significantly accelerated due to the high ionic strength. Increasing of the reaction temperature from 273 K to 333 K was beneficial to the RhB degradation, and the activation energy was determined to be 32.996 kJ/mol. Bleaching rate of RhB with the examined cations increased with the order of NH₄ ⁺?<?Na⁺?<?K⁺?<?Al³⁺?<?Ca²⁺?<?Mg²⁺. Some major degradation products of RhB were identified by GC-MS. The present study may have active technical implications for the treatment of dyestuff wastewater in practice.     

Removal of Cr(VI) onto Ficus carica biosorbent from water

The utilization of sustainable and biodegradable lignocellulosic fiber to detoxify the noxious Cr(VI) from wastewater is considered a versatile approach to clean up a contaminated aquatic environment. The aim of the present research is to assess the proficiency and mechanism of biosorption on Ficus carica bast fiber via isotherm models (Langmuir, Freundlich, Temkin, Harkin’s–Jura, and Dubinin–Radushkevich), kinetic models, and thermodynamic parameters. The biomass extracted from fig plant was characterized by scanning electron microscopy and Fourier-transform infrared spectroscopy. To optimize the maximum removal efficiency, different parameters like effect of initial concentration, effect of temperature, pH, and contact time were studied by batch method. The equilibrium data were best represented by the Langmuir isotherm model, and the maximum adsorption capacity of Cr(VI) onto biosorbent was found to be 19.68 mg/g. The pseudo-second-order kinetic model adequately described the kinetic data. The calculated values of thermodynamic parameters such as enthalpy change (?H ⁰), entropy change (?S ⁰), and free energy change (?G ⁰) were 21.55 kJ/mol, 76.24 J/mol?K, and ?1.55 kJ/mol, respectively, at 30 °C which accounted for spontaneous and endothermic processes. The study of adsorbent capacity for Cr(VI) removal in the presence of Na⁺, Mg²⁺, Ca²⁺, SO ₄ ^2? , HCO ₃ ^? and Cl^? illustrated that the removal of Cr(VI) increased in the presence of HCO^3? ions; the presence of Na⁺, SO ₄ ^2? or Cl^? showed no significant influence on Cr(VI) adsorption, while Ca²⁺ and Mg²⁺ ions led to an insignificant decrease in Cr(VI) adsorption. Further, the desorption studies illustrated that 31.10 % of metal ions can be removed from an aqueous system, out of which 26.63 % of metal ions can be recovered by desorption in first cycle and the adsorbent can be reused. The results of the scale-up study show that the ecofriendly detoxification of Cr(VI) from aqueous systems was technologically feasible.     

Impacts of simulated acid rain on recalcitrance of two different soils

Laboratory experiments were conducted to estimate the impacts of simulated acid rain (SAR) on recalcitrance in a Plinthudult and a Paleudalfs soil in south China, which were a variable and a permanent charge soil, respectively. Simulated acid rains were prepared at pH 2.0, 3.5, 5.0, and 6.0, by additions of different volumes of H₂SO₄ plus HNO₃ at a ratio of 6 to 1. The leaching period was designed to represent 5 years of local annual rainfall (1,200 mm) with a 33 % surface runoff loss. Both soils underwent both acidification stages of (1) cation exchange and (2) mineral weathering at SAR pH?2.0, whereas only cation exchange occurred above SAR pH?3.5, i.e., weathering did not commence. The cation exchange stage was more easily changed into that of mineral weathering in the Plinthudult than in the Paleudalfs soil, and there were some K⁺ and Mg²⁺ ions released on the stages of mineral weathering in the Paleudalfs soil. During the leaching, the release of exchangeable base cations followed the order Ca²⁺?>?K⁺?>?Mg²⁺?>?Na⁺ for the Plinthudult and Ca²⁺?>?Mg²⁺?>?Na⁺?>?K⁺ for the Paleudalfs soil. The SARs above pH?3.5 did not decrease soil pH or pH buffering capacity, while the SAR at pH?2.0 decreased soil pH and the buffering capacity significantly. We conclude that acid rain, which always has a pH from 3.5 to 5.6, only makes a small contribution to the acidification of agricultural soils of south China in the short term of 5 years. Also, Paleudalfs soils are more resistant to acid rain than Plinthudult soils. The different abilities to prevent leaching by acid rain depend upon the parent materials, types of clay minerals, and soil development degrees.     

Ionic composition of TSP and PM2.5 during dust storms and air pollution episodes at Xi'an,China

TSP and PM_2.5 samples were collected at Xi'an, China during dust storms (DSs) and several types of pollution events, including haze, biomass burning, and firework displays. Aerosol mass concentrations were up to 2 times higher during the particulate matter (PM) events than on normal days (NDs), and all types of PM led to decreased visibility. Water-soluble ions (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, F^?, Cl^?, NO₃^?, and SO₄^2?). were major aerosol components during the pollution episodes, but their concentrations were lower during DSs. NH₄⁺, K⁺, F^?, Cl^?, NO₃^?, and SO₄^2? were more abundant in PM_2.5 than TSP but the opposite was true for Mg²⁺ and Ca²⁺. PM collected on hazy days was enriched with secondary species (NH₄⁺, NO₃^?, and SO₄²) while PM from straw combustion showed high K⁺ and Cl^?. Firework displays caused increases in K⁺ and also enrichments of NO₃^? relative to SO₄^2?. During DSs, the concentrations of secondary aerosol components were low, but Ca²⁺ was abundant. Ion balance calculations indicate that PM from haze and straw combustion was acidic while the DSs samples were alkaline and the fireworks' PM was close to neutral. Ion ratios (SO₄^2?/K⁺, NO₃^?/SO₄^2?, and Cl^?/K⁺) proved effective as indicators for different pollution episodes.     

Water-soluble main ions in precipitation over the southeastern Adriatic region: chemical composition and long-range transport

Background, aim and scope  

Precipitation samples collected from 1995 to 2000 at meteorological station in the eastern outskirts of Herceg Novi (Montenegro) were analysed on Na⁺, K⁺, Mg²⁺, Ca²⁺, Cl^–, SO₄ ^2–, NO₃ ^– and NH₄ ⁺. Four-day backward trajectory simulations were conducted during the precipitation period to investigate the regional transport of main ions and their deposition in the region of the southeastern Adriatic Sea. The air mass trajectories were classified into six trajectory categories by the origin and direction of their approach to Herceg Novi.     

Monsoon rain chemistry and source apportionment using receptor modeling in and around National Capital Region (NCR) of Delhi,India

Studies on monsoon precipitation chemistry were carried out to understand the nature of rainwater and sources of pollution at eight different locations in and around the National Capital Region (NCR) of Delhi during southwest monsoon in the years 2003–2005. These sites were Bulandshahr (BUL), Garhmuktesar (GAR), Muradnagar (MUR), Sardhana (SAR), Panipat (PAN), Charkhi Dadri (CHA), Hodal (HOD) and Bahror (BAH). The rainwater samples, collected at these locations, were analyzed for major anions, cations and pH. The data were assessed for its quality. In general, the order of concentrations of major ions was observed to be: Ca²⁺>SO₄²⁻>HCO₃⁻>NH₄⁺>Cl⁻>NO₃⁻>Na⁺>Mg²⁺>K⁺>F⁻. The average pH of rainwater at these stations was observed to be 6.39, ranging from 5.77 to 6.62, indicating alkaline nature. However, a few rain events, 31% at Panipat, 12% at Muradnagar and 29% at Sardhana, were observed to be acidic (pH<5.6). Acidity observed at Panipat and Muradnagar is attributed to industrial influence but at Sardhana to weak organic acids contributed by surrounding vegetation. No definite trends are found for most of the components at all the sites. However, concentrations of Cl⁻ at Bulandshahr; NO₃⁻ at Muradnagar and Hodal; F⁻ at Panipat and Bahror; Na⁺ at Bulandshahr; K⁺ at Bahror and Bulandshahr; Ca²⁺ at Bulandshahr, Muradnagar, Charkhi Dadri and Sardhana; Mg²⁺ at Panipat, Bahror, Bulandshahr, Hodal and Sardhana have increased from 2003 to 2005. For source identification, principal component analysis (PCA) was made, which showed that in general, at all the sites; suspended soil–dust and sea salts which are natural sources, were identified as the most dominating. Sources like agriculture including cattle, brick kilns and industries were reflected in third or fourth PC indicating moderate influence of anthropogenic activities in this region.     

Effect of nonionic surfactant partitioning on the dissolution kinetics of residual perchloroethylene in a model porous medium

At concentrations above the critical micelle concentration, surfactants can significantly enhance the solubilization of residual nonaqueous phase liquids (NAPL) and, for this reason, are the focus of research on surfactant-enhanced aquifer remediation (SEAR). As a consequence of their amphiphilic nature, surfactants may also partition to various extents between the organic and aqueous phases, thereby affecting SEAR performance. We report here on the observation and analysis of the effect of surfactant partitioning on the dissolution kinetics of residual perchloroethylene (PCE) by aqueous solutions (1000 mg/L) of the non-ionic surfactant Triton X-100 in a model porous medium. For this fluid system, batch equilibration experiments showed that the surfactant partitions strongly into the NAPL (NAPL-water partition coefficient equal to 12.5). Dynamic interfacial tension (IFT) measurements were employed to study surfactant diffusion and interfacial adsorption. The dynamic IFT measurements were consistent with partitioning of the surfactant between the two liquid phases. PCE dissolution experiments, conducted in a transparent glass micromodel using an aqueous surfactant solution, were contrasted to experiments using clean water. Surfactant partitioning was observed to delay significantly the onset of micellar solubilization of PCE, an observation reproduced by a numerical model. This effect is attributed to the reduction of surfactant concentration in the immediate vicinity of the NAPL-water interface, which accompanies transport of the surfactant into the NAPL. Accordingly, it is suggested that both the rate and the extent of diffusion of the surfactant into the NAPL affect the onset of and the driving force for micellar solubilization. While many surfactants do not readily partition in NAPL, this possibility must be considered when selecting non-ionic surfactants for the enhanced solubilization of residual chlorinated solvents in porous media.     

Some results of snow chemical surveys in the Kunnes River valley,East Tienshan mountains,China

Chemical surveys of snow were carried out in the upper reaches of the Kunnes River, a tributary of the Yili River in East Tienshan Mountains, China. Some surprisingly high values of sodium and potassium (K⁺+Na⁺) ranging from 4.44 to 8.99 mg/l compared with other data from neighboring areas are detected. Moreover, some relative high values of SO₄²⁻ with mean concentration 15.8 mg/l for new snow and 14.40 mg/l for deposited snow, ranging from 10.43 to 23.71 mg/l are also found. Therefore, it is inferred that the sodium and potassium (K⁺+Na⁺) are in the forms of sulfate and that the sources of the sulfate are deserts and some dried lakes in Central Asia. It is also found that there is obviously spatial variation of ions such as K⁺+Na⁺, Ca²⁺, SO₄²⁻ and HCO₃⁻. The concentrations of K⁺+Na⁺ and SO₄²⁻, and that of Ca²⁺ and HCO₃⁻ have similar spatial pattern. The temporal pattern of ion concentration of new snow is considered to be mainly controlled by the depth and area of snow cover in the study area and in the areas to the west.