Online First publication of <Emphasis Type="Italic">Journal of Material Cycles and Waste Management</Emphasis> now available

ANNOUNCEMENT

Online First publication of Journal of Material Cycles and Waste Management now available     

Air Pollution Zones and Harmful Pollution Levels of Alkaline Dust for Plants

For characterisation of landscapes in north-eastern Estoniaaffected by alkaline oil shale fly ash and cement dust the zonation-method based on average annual (C _y) and short-termconcentrations of pollutants in the air was used, as well as on deposition loads of dust and Ca²⁺. In the overground layer of atmosphere the zones with different air pollution loads were distinguished. A comparative analysis of pollution zones characteristics and biomonitoring data revealed that for sensitive lichen the dangerous level of alkaline dust in the air, introducingthe degradation of Sphagnum sp. at the level of C _y of dust 10–20 g m^-3 and at 0.5–1 hr maximums 100–150 g m^-3. For Scots pine (Pinus sylvestris L.) and Norway spruce (Picea abies (L.) Karst.) this limited concentration (decline of growth parameters) of cement dust is correspondingly following: 30–50 g m^-3 and 150–500 g m^-3, in case of fly ash the limit level of C _y amounting 100 g m^-3. Daily deposition load of Ca²⁺ should not exceed approximately 4.5–15 mg m^-2 for lichen; for conifers the harmful pollution load is higher – >22 mg m^-2.     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Investigation of Biosurfactant Activity and Asphaltene Biodegradation by <Emphasis Type="Italic">Bacillus cereus</Emphasis>

In this research, a biosurfactant-producing bacterium with capability of asphaltene degradation was isolated from oil-contaminated soil samples, and identified as Bacillus cereus. This strain produced an effective biosurfactant in the presence of molasses and the surface tension was reduced to the level of 36.4 mN/m after 48 h under optimum conditions. The optimum values of carbon-to-nitrogen ratio (C:N), pH, and temperature for biosurfactant production were determined as 30:1, 7.3 and 29 °C, respectively, using response surface methodology. The maximum emulsification activity in the culture broth was 53 % after 48 h using kerosene at 25 °C. The goodness of fit of four growth kinetic models including Tessier, Contois, Logistic and Westerhoff was compared for the bacterial growth and molasses utilization of B. cereus in 5-L batch bioreactor during 120 h. Conducted kinetic study showed that biosurfactant production had a good fit with the Contois growth kinetic model (R² = 0.962) and the maximum specific growth rate (µ _max ), saturation constant (K _s ) and the yield of biomass per substrate (Y _x/s ) were determined to be 0.145 h^?1, 1.83 g/L and 0.428 g/g, respectively. The asphaltene biodegradation in flask was evaluated by FTIR analysis and quantified by a spectrophotometer. This bacterium was able to degrade up to 40 % of asphaltene as a sole carbon and energy source after 60 days at 28 °C. The resulting surface tension of 30.2 mN/m with the critical micelle concentration of 23.4 mg/L indicated good efficiency of the biosurfactant.     

Hydrolysis of <Emphasis Type="Italic">Sasa senanensis</Emphasis> culm with dilute sulfuric acid for production of a fermentable substrate

To prepare a substrate for microbial conversion of xylose into xylitol, the culm of Sasa senanensis was hydrolyzed with dilute sulfuric acid. When the reaction temperature was fixed at 121°C, an optimum yield of xylose was obtained by treatment with 2% sulfuric acid for 1 h. An increase in the sulfuric acid concentration or a prolonged reaction time resulted in a decrease in the xylose yield. A fermentable substrate with a relatively high xylose concentration (36.7 g l⁻¹) was obtained by hydrolysis with 2% sulfuric acid with a liquid-to-solid ratio of 5 g g⁻¹. During hydrolysis at elevated temperatures, certain undesired byproducts were also generated, such as degradation products of solubilized sugars and lignin, which are potential inhibitors of microbial metabolism. These compounds were, however, successfully removed from the hydrolysate by treatment with activated char.     

Enhanced bioleaching efficiency of copper from waste printed circuit boards (PCBs) by dissolved oxygen-shifted strategy in <Emphasis Type="Italic">Acidithiobacillus ferrooxidans</Emphasis>

Acidithiobacillus ferrooxidans, as chemolithotrophic aerobic bacterium, can obtain energy by oxidation of ferrous ions (Fe²⁺) to ferric ions (Fe³⁺) and use molecular oxygen (O₂) as terminal electron acceptor. In this study, the effects of dissolved oxygen (DO) levels in culture medium on cell growth and copper extraction from waste printed circuit boards (PCBs) were investigated in A. ferrooxidans. The whole culture period was divided into two stages of cell growth and copper extraction. At the former stage, relatively lower DO level was adopted to satisfy bacterial growth while avoiding excessive Fe²⁺ oxidation. At the later stage, higher DO was used to promote copper extraction. Moreover, shift time of DO from lower to higher level was determined via simulating Gauss function. By controlling DO at 10 % for initial 64 h and switching to 20 % afterwards and with 18 g/l PCBs addition at 64 h, final copper recovery reached 94.1 %, increased by 37.6 and 48.3 % compared to constant DO of 10 and 20 % operations. More importantly, copper leaching periods were shortened from 108 to 60 h. It was suggested that application of DO-shifted strategy to enhancing copper extraction from PCBs with reduced leaching periods is being feasible.     

Chelating Ability and Microbial Stability of an <Emphasis Type="SmallCaps">l</Emphasis>-Arginine-Modified Chitosan-Based Environmental Remediation Material

To improve the heavy metal ion chelating ability and the microbiological stability of chitosan (CS), l-arginine (l-Arg) was grafted on CS polymer in the presence of the condensing agent 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide (EDC) and the coupling reagent N-hydroxysuccinimide (NHS) to prepare a natural polymer-based environmental rehabilitation material: l-arginine-grafted chitosan (CA). The graft mechanism is discussed, and the reaction conditions were optimized. The product was characterized using elemental analysis, infrared spectroscopy (FT-IR) and ¹³C-NMR spectroscopy (¹³C-NMR). The optimal reaction conditions were a reactant molar ratio nCS:nArg:nEDC:nNHS of 3:3:3:1, a reaction time of 12 h, and a reaction system pH?=?5. Under these conditions, the grafting ratio (GR) was 16.85%, while the product yield (PY) was 90.48%. The results of the adsorption experiments showed that the CA (GR?=?16.85%) had a better removal capacity for highly concentrated Cu²⁺ and Ni²⁺ ions than CS. The antibacterial activity of the CA was also enhanced. When the GR reached 16.85%, the CA almost completely inhibited the growth of colibacillus and Staphylococcus aureus. Due to its high chelating ability and microbiological stability, this novel metal-ion adsorption material, CA, can be considered to have broad application potential in heavy metal ion-polluted water and soil remediation.     

Enzymatic degradation of poly([R,S] β-hydroxybutyrate)

The synthetic analogue of a bacterially produced polyester, poly(-hydroxybutyrate) (PHB) was synthesized from racemic -butyrolactone using anin situ trimethyl aluminum-water catalyst. The polymer was fractionated into samples differing in molecular weight and isotactic diad content. The latter was closely related to degree of crystallinity. The biodegradation of these fractions were examined by monitoring mass loss over time in the presence of anAlcaligenes faecalis T1 extracellular bacterial poly(-hydroxybutyrate) depolymerase. The fraction with high isotactic diad tacticity content showed little or no degradation over a 50 hour incubation period, whereas the fraction of intermediate isotactic diad content degraded in a continuous steady fashion at a rate that was less than that for bacterial PHB. The low isotactic diad fraction underwent a rapid initial degradation, followed by no further mass loss. The presence of stereoblocks in the polymer structure of the various fractions was an influence on the degree of susceptibility towards degradation and is related to sample crystallinity.     

Purification and Properties of Extracellular Poly(3-hydroxybutyrate) Depolymerase Produced by <Emphasis Type="Italic">Aspergillus fumigatus</Emphasis> 202

An extracellular poly(3-hydroxybutyrate) (PHB) depolymerase produced by a thermotolerant fungal soil isolate, Aspergillus fumigatus 202, was purified and characterized. Maximum PHB depolymerase production was obtained at the end of 48 h with initial medium pH 7.0 and 45 °C in Bushnell Haas Minerals medium containing PHB as sole source of carbon. The PHB depolymerase was purified using size exclusion chromatography to a fold purification of 20.62 and 61.62% yield. SDS-PAGE and isoelectric focusing revealed the molecular weight and pI of the purified enzyme as 63,744 Da and 4.2, respectively. N-terminal amino acid sequence of purified enzyme was HAXDAYLVK. This non-glycosylated enzyme was most active at pH 9.0 and 45 °C. Purified enzyme was inactivated by N-bromosuccinimide and dithiothreitol suggesting the involvement of tryptophan residues and disulfide bonds at its active site. Nonionic detergents like Tween 20, Tween 80 and Triton X-100 inhibited the enzyme activity. Ions like Ca⁺² and Mg⁺² (5 mM) increased the enzyme activity 1.5 times. Fe⁺² effectively inhibited the enzyme activity to 88% whereas Hg⁺² completely inhibited the enzyme.     

Preface

Preface

Preface     

Enzyme-Assisted Extraction and Pb<Superscript>2+</Superscript> Biosorption of Polysaccharide from <Emphasis Type="Italic">Cordyceps militaris</Emphasis>

The enzyme assisted extraction conditions of polysaccharide from Cordyceps militaris mycelia were firstly investigated by kinetics analysis and the optimal operating was found to be: extraction temperature 40 °C; solid-solvent ratio 1:20; extraction pH 4.0; cellulase concentration 2.0%. The polysaccharide extraction yield was 5.99% under these optimized conditions. Furthermore, a fundamental investigation of the biosorption of Pb²⁺ from aqueous solution by the C. militaris polysaccharide was performed under batch conditions. The suitable pH (5.0), polysaccharide concentration (0.20 g L^?1), initial Pb²⁺ concentration (300 mg L^?1) and contact time (40 min) were outlined to enhance Pb²⁺ biosorption from aqueous medium. The Langmuir isotherm model and pseudo first order kinetic model fitted well to the data of Pb²⁺ biosorption, suggesting the biosorption of Pb²⁺ onto C. militaris polysaccharide was monolayer biosorption and physical adsorption might be the rate-limiting step that controlled the adsorption process. FTIR analysis showed that the main functional groups of C. militaris polysaccharide involved in adsorption process were carbonyl, carboxyl, and hydroxyl groups.     

Gene Cloning and Characterization of a Poly(<Emphasis Type="SmallCaps">l</Emphasis>-Lactic Acid) Depolymerase from <Emphasis Type="Italic">Pseudomonas</Emphasis> sp. Strain DS04-T

A gene encoding a poly(l-lactic acid) (PLA) depolymerase from Pseudomonas sp. strain DS04-T was cloned and overexpressed in Escherichia coli. The recombinant PLA depolymerase with a molecular weight of 19.2 kDa was purified to homogeneity. The optimum pH and temperature of the PLA depolymerase are 8.5 and 60 °C, respectively. K⁺, Ca²⁺ and Ni²⁺ enhance the enzyme activity, while Na⁺, Zn²⁺, Mg²⁺, Cu²⁺, Fe²⁺, Mn²⁺ and Co²⁺ inhibit it. The inhibition of different chemicals on the PLA depolymerase activity were examined, in which EDTA was found to have a significantly inhibitory effect. The main degradation product of the depolymerase is identified as lactic acid monomer by mass spectrometric analysis. Physicochemical properties, substrate specificity and sequence analysis indicated that PME is a new type of PLA depolymerase.     

Correction Factors for Covariance between Concentration and Deposition Velocity on CASTNes HNO3 Deposition Estimates

The covariance between hourly concentration (C) and depositionvelocity (V) for various atmospheric species may act to bias the dry deposition (D) computed from the product of the weeklyaverage C and V. This is a potential problem for the CASTNet filter pack (FP) species, nitric acid (HNO₃). Using ozone (O₃) behavior as a surrogate for HNO₃, correctionfactors (CF) are developed to estimate this bias. Weekly CF for O₃ depend on both site and season, and seasonal average weekly CF for O₃ at a given site may be as high as 1.25.The seasonal magnitude of this CF is generally largest in summerand is ordered: summer fall spring > winter. The CF is drivento a large extent by the diurnal correlation between C andV (i.e., both are generally higher during the day and lower at night). However, since the diurnal C profile at elevated sites is relatively constant, the resulting correlation between C and V is small, and the CF at montane sites is generally negligiblysmall. The sampling protocol using daytime integrated sampling for a week and nighttime integrated sampling for a week capturesthe diurnal correlation between C and V adequately and may be used to aggregate relatively unbiased weekly D estimates. Day-night CF for O₃ are close to unity, and limited results suggest similar behavior for HNO₃. Using these limited FP results, the site- and seasonally-specific weekly CF forO₃are refined to estimate the corresponding CF for HNO₃. Worst-case adjustments for HNO₃ as high as 30% are indicated for summer periods at a given site.     

Preparation of Water-Insoluble Antibacterial Materials with Surface-Grafted Material PSt/SiO<Subscript>2</Subscript> and Their Antibacterial Activity

Styrene (St) was graft-polymerized onto the surfaces of micro-sized silica gel particles, and the surface-grafted composite particles PSt/SiO₂ were obtained. With the surface-grafted composite particles PSt/SiO₂ as a starting material, water-insoluble antibacterial materials with quaternary ‘onium’ salt-type were synthesized via two polymer reaction steps. The grafted polystyrene was first chloromethylated, resulting in grafted particles CMPS/SiO₂, and then quaterisation (QN) and quaternary phosphonium reaction (QP) were conducted with triethylamine, tri-n-butylamine and triphenyl phosphine as reagents, respectively. Two kinds of water-insoluble antibacterial materials, QN-PSt/SiO₂ and QP-PSt/SiO₂ were prepared. Their antibacterial property was mainly investigated by using Escherichia coli (E. coli) as a model bacterium and by adopting colony count method. The relationship between the chemical structure of the antibacterial group and antimicrobial activity for the water-insoluble antibacterial materials was studied in detail, and their antibacterial mechanism was investigated by TTC-dehydrogenase activity determination and extracellular DNA and RNA measurement methods. The experimental results show that QN-PSt/SiO₂ and QP-PSt/SiO₂ possess strong antibacterial activity. The main factors affecting the antibacterial ability of the water-insoluble materials are the chemical structure of the antibacterial groups, the bound density of the antibacterial groups on the surface of the water-insoluble antibacterial materials as well as the pH value of the medium. QP-PSt/SiO₂ has stronger antibacterial activity than QN-PSt/SiO₂; the QN-PSt/SiO₂ prepared with tri-n-butylamine has stronger antibacterial activity than that prepared with triethylamine; the water-insoluble material with higher bound density of the antibacterial groups has stronger antibacterial ability; as the pH value of the medium is over the isoelectric point of E. coli, the antibacterial ability is strengthened with the increase of pH value.     

Selective catalytic reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> using RDF char and municipal solid waste char based catalyst

Experiments were performed in order to investigate the possibility for the development of catalysts for low-temperature selective catalytic reduction (SCR) using municipal waste char and RDF byproduct. Physical and chemical activations, using water, and HCl and KOH, were employed to increase the catalytic activities. The characteristics of the activated catalysts were investigated using N₂ adsorption–desorption and FT-IR. The catalysts activated chemically using basic treatment showed higher NO _x removal efficiencies than those activated physically or chemically using acidic treatment. The de-NO _x performance of the activated catalysts was dependent on the chemical properties, such as oxygen functional groups as well as physical properties, such as specific surface area and pore volume. In order to investigate the effect of MnO _x , which has been reported to be efficient for the removal of NO _x in low-temperature SCR processes, the chemically activated catalyst was impregnated with manganese. The Mn-impregnated catalyst had the highest NO _x conversion at all of the temperatures tested in this study.     

Kinetic Study of Biopolymer (PHB) Synthesis in <Emphasis Type="Italic">Alcaligenes</Emphasis> sp. in Submerged Fermentation Process Using TEM

Poly-β-hydroxybuyrate (PHB) is a carbon—energy storage material which is accumulated as intracellular granule in variety of microorganism under nutrient starved conditions. Solid PHB is a biodegradable thermoplastic polymer and is utilizable in various ways similar to many conventional plastics. Ralstonia eutropha (Alcaligenes sp.), a gram negative bacteria accumulates PHB as insoluble granules inside the cells when nutrients other than carbon are limited. In this report effort has been made to analyze PHB granule synthesis inside Alcaligenes sp. NCIM 5085 by transmission electron microscopy and qualitative estimation of PHB was carried out by fourier transform infrared spectroscopy which provide better precision compared to other conventional techniques previously applied for PHB determination. Maximum PHB concentration of 2.20 ± 0.40 g/L and cell biomass of 3.42 ± 0.20 g/L was obtained after 48.0 h of fermentation. Leudking-Piret equation deduced mixed growth associated product formation which varies from earlier reports.     

The release of nitrous oxide from the intertidal zones of two European estuaries in response to increased ammonium and nitrate loading

Nitrous oxide (N₂O) release and denitrification rates were investigated from the intertidal saltmarsh and mudflats of two European river estuaries, the Couesnon in Normandy, France and the Torridge in Devon, UK. Sediment cores and water were collected from each study site and incubated for 72 h in tidal simulation chambers. Gas samples were collected at 6 and 12 h intervals from the chambers during incubation. From these N₂O emission rates were calculated. The greatest rates for both N₂O production and denitrification were measured from saltmarsh cores. These were 1032 mol N₂O m^–2 day^–1 and 2518 mol N₂ m^–2 day^–1, respectively, from the Couesnon and 109 mol N₂O m^–2 day^–1 and 303 mol N₂ m^–2 day^–1 from the Torridge. A strong positive correlation was apparent with N₂O emission rates and ammonium concentration in the sediment, nitrate concentration in floodwater and sediment aerobicity.     

The Control of SO2 Dry Deposition on to Natural Surfaces by NH3 and its Effects on Regional Deposition

Two years of continuous measurements of SO₂deposition fluxes to moorland vegetation are reported. The mean flux of 2.8 ng SO₂ m^-2 s^-1 is regulated predominantly by surface resistance (r _c) which, even for wet surfaces, was seldom smaller than 100 s m^-1. The control of surface resistance is shown to be regulated by the ratio of NH₃SO₂ concentrations with an excess of NH₃ generating the small surface resistances for SO₂. A dynamic surface chemistry model is used to simulate the effects of NH₃ on SO₂ deposition flux and is able to capture responses to short-term changes in ambient concentrations of SO₂, NH₃ and meteorological conditions. The coupling between surface resistance and NH₃/SO₂ concentration ratios shows that the deposition velocity for SO₂ is regulated by the regional pollution climate. Recent long-term SO₂ flux measurements in a transect over Europe demonstrate the close link between NH₃/SO₂ concentrations and rc (SO₂). The deposition velocity for SO₂ is predicted to have increased with time since the 1970s and imply a 40% increase in v _d at a site at which the annual mean ambient SO₂ concentrations declined from 47 to 3 g m^-3 between 1973 and 1998.     

A new joint publication

Special FeatureWaste Management Research in Korea

A new joint publication     

Enhancement of biogas production potential from <Emphasis Type="Italic">Acacia</Emphasis> leaf waste using alkaline pre-treatment and co-digestion

The objective of this research was to evaluate possibility of utilizing Acacia leaves (A. mangium and A. auriculiformis), which is an agro-industrial waste from the pulp and paper industry. The effects of alkaline pre-treatment and co-digestion with Napier grass for the enhancement of biogas production from Acacia leaf waste (ALW) were investigated. Six continuous stirred tank reactors with a working volume of 5 L were carried out at the laboratory scale. The results showed that pre-treatment of Acacia leaf waste (pretreated ALW) by soaking in 3 % NaOH for 48 h increased the biogas and methane productivity to 0.200 and 0.117 m³/kgVS_added compared to 0.098 and 0.048 m³/kgVS_added of raw ALW digestion, respectively. Meanwhile, the co-digestion of Acacia leaves with different proportions of Napier grass at ratios of 1:1–1:3 in volatile solid basis also increased the production of biogas and its productivity. The maximum gas production yields of 0.424 and 0.268 m³/kgVS_added for biogas and methane were obtained at 1:3 ratio. This finding affirms the potential of ALW and its possibility to use as biogas feedstock in both single and co-substrate with Napier grass.