Report on hazardous household waste generation in Japan.

Surveys of over 2000 households in Japan were conducted to investigate the characteristics of hazardous household waste (HHW) generation. In Japan, about 2.5 to 4.3 kg of HHW are produced per tonne of the residential waste stream. The percentage of used batteries in HHW was over 50%. Every household using spray (aerosol) cans had more than seven cans on average. The generation of HHW, in terms of both quantities and type of waste produced, appeared to vary with dwelling type. Detached dwelling residents tended to store HHW such as used batteries, whereas apartment residents tended not to store waste. The amounts of discarded HHW were larger at the end of the year in comparison with other months. The data accumulated were used to estimate the quantities of HHW disposed off annually, and the quantities and type of waste that might be received by a typical depot collection programme in Japan.     

Consumption patterns and household hazardous solid waste generation in an urban settlement in México

Mexico is currently facing a crisis in the waste management field. Some efforts have just commenced in urban and in rural settlements, e.g., conversion of open dumps into landfills, a relatively small composting culture, and implementation of source separation and plastic recycling strategies. Nonetheless, the high heterogeneity of components in the waste, many of these with hazardous properties, present the municipal collection services with serious problems, due to the risks to the health of the workers and to the impacts to the environment as a result of the inadequate disposition of these wastes. A generation study in the domestic sector was undertaken with the aim of finding out the composition and the generation rate of household hazardous waste (HHW) produced at residences. Simultaneously to the generation study, a socioeconomic survey was applied to determine the influence of income level on the production of HHW. Results from the solid waste generation analysis indicated that approximately 1.6% of the waste stream consists of HHW. Correspondingly, it was estimated that in Morelia, a total amount of 442ton/day of domestic waste are produced, including 7.1ton of HHW per day. Furthermore, the overall amount of HHW is not directly related to income level, although particular byproducts do correlate. However, an important difference was observed, as the brands and the presentation sizes of goods and products used in each socioeconomic stratum varied.     

Setting priorities for waste management strategies in developing countries.

This study aimed to determine whether the waste management systems, that are presently applied in affluent countries are appropriate solutions for waste management in less developed regions. For this purpose, three cities (Vienna, Damascus and Dhaka) which differ greatly in their gross domestic product and waste management were compared. The criteria for evaluation were economic parameters, and indicators as to whether the goals of waste management (protection of human health and the environment, the conservation of resources) were reached. Based on case studies, it was found that for regions spending 1-10 Euro capita(-1) year(-1) for waste management, the 'waste hierarchy' of prevention, recycling and disposal is not an appropriate strategy. In such regions, the improvement of disposal systems (complete collection, upgrading to sanitary landfilling) is the most cost-effective method to reach the objectives of solid waste management. Concepts that are widely applied in developed countries such as incineration and mechanical waste treatment are not suitable methods to reach waste management goals in countries where people cannot spend more than 10 Euro per person for the collection, treatment and disposal of their waste. It is recommended that each region first determines its economic capacity for waste management and then designs its waste management system according to this capacity and the goals of waste management.     

Collection and recycling of electronic scrap: a worldwide overview and comparison with the Brazilian situation

Recycling and the related issue of sustainable development are increasing in importance around the world. In Brazil, the new National Policy on Solid Wastes has prompted discussion on the future of electronic waste (e-waste). Over the last 10 years, different e-waste collection systems and recycling processes have been applied globally. This paper presents the systems used in different countries and compares the world situation to the current Brazilian reality. To establish a recycling process, it is necessary to organize efficient collection management. The main difficulty associated with the implementation of e-waste recycling processes in Brazil is the collection system, as its efficiency depends not only on the education and cooperation of the people but also on cooperation among industrial waste generators, distributors and the government. Over half a million waste pickers have been reported in Brazil and they are responsible for the success of metal scrap collection in the country. The country also has close to 2400 companies and cooperatives involved in recycling and scrap trading. On the other hand, the collection and recycling of e-waste is still incipient because e-wastes are not seen as valuable in the informal sector. The Brazilian challenge is therefore to organize a system of e-waste management including the informal sector without neglecting environmentally sound management principles.     

Current situation of used household batteries in Iran and appropriate management policies

Used household batteries are considered as hazardous wastes in many countries due to the potential environmental and human health risks associated with the heavy metals present in batteries. This article presents the current situation of waste household batteries and policies in Iran. Iran with more than 70 million people is a developing country where latest technologies like cell phones and laptops are in widespread use and battery consumption increases accordingly. The household battery demand in Iran has rapidly grown since 2001 and it is expected to increase more quickly in next years, due to increasing technological development. Based on the available data, more than 9800 metric tons of household batteries were imported into Iran in recent decade, with the market value of about US$ 42.6 million. At present, there is no program available in Iran regarding to collection, separation, recycling or safe disposal of used batteries. Therefore, almost all of the spent household are discarded into municipal solid waste (MSW) and sent to sanitary landfills. Appropriate policies to meet safe disposal of household batteries in Iran is also discussed in this investigation.     

Determining heavy metals in spent compact fluorescent lamps (CFLs) and their waste management challenges: Some strategies for improving current conditions

From environmental viewpoint, the most important advantage of compact fluorescent lamps (CFLs) is reduction of green house gas emissions. But their significant disadvantage is disposal of spent lamps because of containing a few milligrams of toxic metals, especially mercury and lead. For a successful implementation of any waste management plan, availability of sufficient and accurate information on quantities and compositions of the generated waste and current management conditions is a fundamental prerequisite. In this study, CFLs were selected among 20 different brands in Iran. Content of heavy metals including mercury, lead, nickel, arsenic and chromium was determined by inductive coupled plasma (ICP). Two cities, Tehran and Tabriz, were selected for assessing the current waste management condition of CFLs. The study found that waste generation amount of CFLs in the country was about 159.80, 183.82 and 153.75 million per year in 2010, 2011 and 2012, respectively. Waste generation rate of CFLs in Iran was determined to be 2.05 per person in 2012. The average amount of mercury, lead, nickel, arsenic and chromium was 0.417, 2.33, 0.064, 0.056 and 0.012 mg per lamp, respectively. Currently, waste of CFLs is disposed by municipal waste stream in waste landfills. For improving the current conditions, we propose by considering the successful experience of extended producer responsibility (EPR) in other electronic waste management. The EPR program with advanced recycling fee (ARF) is implemented for collecting and then recycling CFLs. For encouraging consumers to take the spent CFLs back at the end of the products’ useful life, a proportion of ARF (for example, 50%) can be refunded. On the other hand, the government and Environmental Protection Agency should support and encourage recycling companies of CFLs both technically and financially in the first place.     

Management of hazardous waste in Thailand: present situation and future prospects

 This paper deals with the present scenario of hazardous waste management practices in Thailand, and gives some insights into future prospects. Industrialization in Thailand has systematically increased the generation of hazardous waste. The total hazardous waste generated in 2001 was 1.65 million tons. It is estimated that over 300 million kg/year of hazardous waste is generated from nonindustrial, community sources (e.g., batteries, fluorescent lamps, cleansing chemicals, pesticides). No special facilities are available for handling these wastes. There are neither well-established systems for separation, storage, collection, and transportation, nor the effective enforcement of regulations related to hazardous wastes management generated from industrial or nonindustrial sectors. Therefore, because of a lack of treatment and disposal facilities, these wastes find their way into municipal wastewaters, public landfills, nearby dump sites, or waterways, raising serious environmental concern. Furthermore, Thailand does not have an integrated regulatory framework regarding the monitoring and management of hazardous materials and wastes. In addition to the absence of a national definition of hazardous wastes, limited funding has caused significant impediments to the effective management of hazardous waste. Thus, current waste management practices in Thailand present significant potential hazards to humans and the environment. The challenging issues of hazardous waste management in Thailand are not only related to a scarcity of financial resources (required for treatment and disposal facilities), but also to the fact that there has been no development of appropriate technology following the principles of waste minimization and sustainable development. A holistic approach to achieving effective hazardous waste management that integrates the efforts of all sectors, government, private, and community, is needed for the betterment of human health and the environment. Received: February 26, 2001 / Accepted: October 11, 2002     

Comparative analysis of hazardous household waste in two Mexican regions

Household hazardous waste (HHW) generation in two Mexican regions was examined, a northern region (bordering with the USA) and a central region. The aim of this work was to determine the dynamics of solid waste generation and to be able to compare the results of both regions, regarding consumption patterns and solid waste generation rates. In the northern region, household solid waste was analysed quantitatively. In order to perform this analysis, the population was categorized into three socioeconomic strata (lower, middle, upper). Waste characterization revealed the presence of products that give origin to household hazardous waste. In the northern region (Mexicali city), household hazardous waste comprised 3.7% of municipal solid waste, the largest categories in this fraction were home care products (29.2%), cleaning products (19.5%) and batteries and electronic equipment (15.7%). In the central region, HHW comprised 1.03% of municipal solid waste; the main categories in this fraction were represented by cleaning products (39%), self care products (27.3%), and insecticides (14.4%). In Mexicali, the socioeconomic study demonstrated that the production of HHW is independent of the income level. Furthermore, the composition of the solid waste stream in both regions suggested the influence of another set of variables such as local climate, migration patterns and marketing coverage. Further research is needed in order to establish the effect of low quantities of HHW upon the environment and public health.     

SOLID WASTE MANAGEMENT IN TEHRAN

The main objective of this paper is to analyse the present status of solid waste management in Tehran, and subsequently, to draw up a policy regarding their generation, collection, on-site handling, storage, processing, recycling, transportation and safe disposal. Through a detailed survey, all functional elements of the present solid waste management system in Tehran were studied. Factors affecting the important management issues in the operation of Tehran's solid waste management system are discussed. Key design data and other useful information selected from a variety of reliable sources are presented. The practical aspects associated with solid waste management systems, such as organizational structure, financing, operations, equipment management, personnel, reporting, cost accounting and budgeting, ordinances and guidelines, and public communications are described.     

Using a contingent valuation approach for improved solid waste management facility: evidence from Kuala Lumpur, Malaysia

This study employed contingent valuation method to estimate the willingness to pay (WTP) of the households to improve the waste collection system in Kuala Lumpur, Malaysia. The objective of this study is to evaluate how household WTP changes when recycling and waste separation at source is made mandatory. The methodology consisted of asking people directly about their WTP for an additional waste collection service charge to cover the costs of a new waste management project. The new waste management project consisted of two versions: version A (recycling and waste separation is mandatory) and version B (recycling and waste separation is not mandatory). The households declined their WTP for version A when they were asked to separate the waste at source although all the facilities would be given to them for waste separation. The result of this study indicates that the households were not conscious about the benefits of recycling and waste separation. Concerted efforts should be taken to raise environmental consciousness of the households through education and more publicity regarding waste separation, reducing and recycling.     

Integrated solid waste management based on the 3R approach

Integrated solid waste management (ISWM) based on the 3R approach (reduce, reuse, and recycle) is aimed at optimizing the management of solid waste from all the waste-generating sectors (municipal, construction and demolition, industrial, urban agriculture, and healthcare facilities) and involving all the stakeholders (waste generators, service providers, regulators, government, and community/neighborhoods). This article discusses the concept of solid waste management (SWM). Initially, SWM was aimed at reducing the risks to public health, and later the environmental aspect also became an important focus of SWM. Recently, another dimension is becoming a critical factor for SWM, i.e., resource conservation and resource recovery. Hence, the 3R approach is becoming a guiding factor for SWM. On the one hand, 3R helps to minimize the amount of waste from generation to disposal, thus managing the waste more effectively and minimizing the public health and environmental risks associated with it. On the other hand, resource recovery is maximized at all stages of SWM. Lately, the new concept of ISWM has been introduced to streamline all the stages of waste management, i.e., source separation, collection and transportation, transfer stations and material recovery, treatment and resource recovery, and final disposal. It was originally targeted at municipal solid waste management (MSWM), but now the United Nations Environment Programme (UNEP) is promoting this concept to cover all waste generating sectors to optimize the level of material and resource recovery for recycling as well as to improve the efficiency of waste management services. The ISWM concept is being transformed into ISWM systems to replace conventional SWM systems. This article further discusses the implementation process for ISWM. The process includes a baseline study on the characterization and quantification of waste for all waste generating sectors within a city, assessment of current waste management systems and practices, target setting for ISWM, identification of issues of concern and suggestions from stakeholders, development of a draft ISWM plan, preparation of an implementation strategy, and establishment of a monitoring and feedback system. UNEP is assisting member countries and their cities to develop an ISWM plan covering all the waste generating sectors within a specific geographical or administrative area such as a city or municipality. This umbrella approach is useful to generate sufficient volumes of recycling materials required to make recycling industries feasible. This is also helpful for efficient reallocation of resources for SWM such as collection vehicles, transfer stations, treatment plants, and disposal sites. UNEP is assisting cities to develop and implement ISWM based on the 3R approach. These experiences could be useful for other countries to develop and implement ISWM to achieve improved public health, better environmental protection, and resource conservation and resource recovery.     

Use of recycling stations in Borlänge, Sweden--volume weights and attitudes

This paper presents a study of recycling stations in the municipality of Borl?nge, Sweden. The main objectives were to measure volume weights of recyclables, to facilitate future planning of collection intervals and bin/container volume, and to investigate the general attitudes among the public towards waste management in general and recycling stations in particular. Volume weights measured in bins/containers were: paper/newsprint: 297 kg/m3, glass packaging: 297 kg/m3, metal packaging: 81.7 kg/m3, paper packaging: 27.8 kg/m3, plastic packaging: 28.1 kg/m3. The recycling stations have been in use since 1994. Most visitors (90%) arrived by car but said the visit to the recycling station was not the main purpose of the trip. The results from the interviews indicated that the people who use the recycling stations have found ways to incorporate waste sorting into their everyday lives, with the help of information, design of the collection system and environmental concerns.     

The effect of dynamic scheduling and routing in a solid waste management system

Solid waste collection and hauling account for the greater part of the total cost in modern solid waste management systems. In a recent initiative, 3300 Swedish recycling containers have been fitted with level sensors and wireless communication equipment, thereby giving waste collection operators access to real-time information on the status of each container. In this study, analytical modeling and discrete-event simulation have been used to evaluate different scheduling and routing policies utilizing the real-time data. In addition to the general models developed, an empirical simulation study has been performed on the downtown recycling station system in Malmoe, Sweden. From the study, it can be concluded that dynamic scheduling and routing policies exist that have lower operating costs, shorter collection and hauling distances, and reduced labor hours compared to the static policy with fixed routes and pre-determined pick-up frequencies employed by many waste collection operators today. The results of the analytical model and the simulation models are coherent, and consistent with experiences of the waste collection operators.     

Waste collection systems for recyclables: An environmental and economic assessment for the municipality of Aarhus (Denmark)

Recycling of paper and glass from household waste is an integrated part of waste management in Denmark, however, increased recycling is a legislative target. The questions are: how much more can the recycling rate be increased through improvements of collection schemes when organisational and technical limitations are respected, and what will the environmental and economic consequences be? This was investigated in a case study of a municipal waste management system. Five scenarios with alternative collection systems for recyclables (paper, glass, metal and plastic packaging) were assessed by means of a life cycle assessment and an assessment of the municipality’s costs. Kerbside collection would provide the highest recycling rate, 31% compared to 25% in the baseline scenario, but bring schemes with drop-off containers would also be a reasonable solution. Collection of recyclables at recycling centres was not recommendable because the recycling rate would decrease to 20%. In general, the results showed that enhancing recycling and avoiding incineration was recommendable because the environmental performance was improved in several impact categories. The municipal costs for collection and treatment of waste were reduced with increasing recycling, mainly because the high cost for incineration was avoided. However, solutions for mitigation of air pollution caused by increased collection and transport should be sought.     

The ecological relevance of transport in waste disposal systems in Western Europe

With the development of modern waste management systems in Western Europe, a remarkable increase in the distances for waste transportation has been observed. The question thus arises whether recycling with longer transport distances is ecologically advantageous or whether disposal without recycling is to be preferred. This situation was analysed using selected product and waste streams. This included refrigerators, paper, polyethylene films and expanded polystyrene. For each of these streams, a life cycle analysis was conducted with an emphasis on waste transport. The system boundaries were set in terms of the generation of waste to recycling or landfilling. The comparison included several scenarios with recycling and different transport distances. Landfilling was used as the reference scenario. The results obtained demonstrated how transport distances influence the ecological benefit of recycling. In the case of expanded polystyrene, the ecological boundaries are reached in practical situations, while with other materials these boundaries are far from being attained. In these cases, more complex and elaborate collection schemes, such as kerbside collection, which is economically convenient and shows the highest collection rates, can also be recommended.     

Solid waste collection and recycling in Nibong Tebal, Penang, Malaysia: a case study.

The implementation of a suitable solid waste management programme with appropriate methods of recycling as an inherent element is vital to the alleviation of the problems associated with solid waste generation, handling and disposal, environmental conservation, public hygiene, etc. The present work is a case study on solid waste collection and recycling practices in Nibong Tebal town, Penang, Malaysia. The amount and types of domestic waste generated, household participation in recycling, identification of existing problems related to the implementation of the recycling programme, etc. formed the basis of this study. Surveys (interviews/questionnaires) and on-site observations were conducted to gather information on the solid waste collection and recycling practice of the residents. A focus group of 60 individuals was selected and their response to a questionnaire, prepared according to a Likert scale, was obtained and analysed. The majority of the respondents expressed concerns about recycling and wanted more to be done in this regard. Illegal collection, aesthetically displeasing sites and a lack of public awareness were problems of major concern. Issues related to inadequate funding and manpower as well as end market are also addressed and suggestions made.     

Life cycle inventory analyses for five waste management options for discarded newspaper.

This paper presents the results of life cycle inventory (LCI) analyses that were carried out to determine the environmental impacts (emissions, resource extractions and land use) of different newspaper waste management options for the Helsinki Metropolitan Area (HMA). LCI analyses were performed for five product systems, in which discarded newspapers were divided into two streams: separately collected newspapers and newspapers in mixed waste. In all the options, the manufacturing and printing processes of newspaper were kept unchanged. The waste management alternatives included combinations of material recycling, energy recovery and landfilling. These product systems were modelled using the current collection rate of newspaper and four additional collection rates. The LCIs of the product systems showed that the life cycle phase causing the most environmental impacts was the paper mill. When comparing the different waste management systems, the energy recovery options were in general superior to landfilling. The ecological implications of the increased energy recovery and decreased material recycling of newspaper were, however, not yet considered in the study. These aspects were assessed in the life cycle impact assessment (LCIA), which was performed after the LCI phase.     

Management of recycling in the Gulf Co-operation Council states

Although some of the Gulf Co-operation Council (GCC) member states have placed recycling at the top of their waste management priorities, the low cost of landfill and the availability of land, usually old sand or gravel quarries, make recycling programs infeasible, uneconomical and unachievable. The only comprehensive form of recycling available within the GCC states is recycling of paper and cartons. The majority of the GCC states never set national or regional recycling targets. The cost of recycling in the GCC states region could be moderate to high depending on the collection system selected for the recycling program. Almost all of the cities within the GCC states use mechanised systems for daily collection of municipal solid waste (MSW). Therefore, the same daily collection system used for MSW might well be used for collection of recyclable materials, both on the same day and at the same time, or according to a different timetable. This paper provides strategies for developing an effective recycling marketing program and discusses regional co-ordination options.     

Pay as you throw: Strengths and weaknesses of weight-based billing in household waste collection systems in Sweden

Householders’ response to weight-based billing for the collection of household waste was investigated with the aim of providing decision support for waste management policies. Three questions were addressed: How much and what kind of information on weight-based billing is discernible in generic Swedish waste collection statistics? Why do local authorities implement weight-based billing, and how do they perceive the results? and, Which strengths and weaknesses of weight-based billing have been observed on the local level? The study showed that municipalities with pay-by-weight schemes collected 20% less household waste per capita than other municipalities. Surprisingly, no part of this difference could be explained by higher recycling rates. Nevertheless, the majority of waste management professionals were convinced that recycling had increased as a result of the billing system. A number of contradicting strengths and weaknesses of weight-based billing were revealed.     

Cost effectiveness of recycling: A systems model

Financial analytical models of waste management systems have often found that recycling costs exceed direct benefits, and in order to economically justify recycling activities, externalities such as household expenses or environmental impacts must be invoked. Certain more empirically based studies have also found that recycling is more expensive than disposal. Other work, both through models and surveys, have found differently. Here we present an empirical systems model, largely drawn from a suburban Long Island municipality. The model accounts for changes in distribution of effort as recycling tonnages displace disposal tonnages, and the seven different cases examined all show that curbside collection programs that manage up to between 31% and 37% of the waste stream should result in overall system savings. These savings accrue partially because of assumed cost differences in tip fees for recyclables and disposed wastes, and also because recycling can result in a more efficient, cost-effective collection program. These results imply that increases in recycling are justifiable due to cost-savings alone, not on more difficult to measure factors that may not impact program budgets.