Research progress on distribution,sources, identification,toxicity, and biodegradation of microplastics in the ocean,freshwater, and soil environment

• Microplastics are widely found in both aquatic and terrestrial environments. • Cleaning products and discarded plastic waste are primary sources of microplastics. • Microplastics have apparent toxic effects on the growth of fish and soil plants. • Multiple strains of biodegradable microplastics have been isolated. Microplastics (MPs) are distributed in the oceans, freshwater, and soil environment and have become major pollutants. MPs are generally referred to as plastic particles less than 5 mm in diameter. They consist of primary microplastics synthesized in microscopic size manufactured production and secondary microplastics generated by physical and environmental degradation. Plastic particles are long-lived pollutants that are highly resistant to environmental degradation. In this review, the distribution and possible sources of MPs in aquatic and terrestrial environments are described. Moreover, the adverse effects of MPs on natural creatures due to ingestion have been discussed. We also have summarized identification methods based on MPs particle size and chemical bond. To control the pollution of MPs, the biodegradation of MPs under the action of different microbes has also been reviewed in this work. This review will contribute to a better understanding of MPs pollution in the environment, as well as their identification, toxicity, and biodegradation in the ocean, freshwater, and soil, and the assessment and control of microplastics exposure.     

Hormesis-like growth and photosynthetic physiology of marine diatom Phaeodactylum tricornutum Bohlin exposed to polystyrene microplastics

• Polystyrene microplastic caused hormesis-like effects in Phaeodactylum tricornutum. • Low concentration of microplastic promoted growth, otherwise the opposite was true. • The change trends of pigment contents were opposite at two initial algae densities. • The chlorophyll fluorescence parameters were more sensitive at low algae density. The effects of pristine polystyrene microplastics (pMPs) without any pretreatment at different concentrations (0, 10, 20, 50, and 100 mg/L) on Phaeodactylum tricornutum Bohlin at two initial algae densities (10⁵ and 10⁶ cells/mL) were assessed in this study. Hormesis-like effects were found when microalgae grew with pMPs. The results showed that pMPs inhibited microalgae growth under a high concentration of microplastics tolerated by individual algal cell (low initial algae density) (up to −80.18±9.71%) but promoted growth when the situation was opposite (up to 15.27±3.66%). The contents of photosynthetic pigments including chlorophyll a, chlorophyll c and carotenoids showed resistance to pMPs stress under a low initial algae density and increased with time, but the opposite was true under a high initial algae density. Compared with the low initial algae density group, Qp received less inhibition, and NPQ (heat dissipation) also decreased under the high initial algae density. Under the low initial algae density, OJIP parameters such as S_m, N, Area, Pi Abs, ѱ_o, φ_Eo, TRo/RC and ETo/RC were more perturbed initially and returned to the levels of the control group (without pMPs) over time, but they remained stable throughout the experiment at high initial algae density. These results show that microplastics in the marine environment may have different toxic effects on P. tricornutum at different growth stages, which is of great significance for understanding the impact of microplastics on marine microalgae and aquatic ecosystems.     

Fate of microplastics in a coastal wastewater treatment plant: Microfibers could partially break through the integrated membrane system

• Fate of microplastics in integrated membrane system for water reuse was investigated. • Integrated membrane system has high removal efficiency (>98%) for microplastics. • Microplastics (>93%) were mainly removed through membrane bioreactor treatment. • Small scale fiber plastics (<200 μm) could break through reverse osmosis (RO) system. • The flux of microplastics maintained at 2.7 × 10¹¹ MPs/d after the RO treatment. Rare information on the fate of microplastics in the integrated membrane system (IMS) system in full-scale wastewater treatment plant was available. The fate of microplastics in IMS in a coastal reclaimed water plant was investigated. The removal rate of microplastics in the IMS system reached 93.2% after membrane bioreactor (MBR) treatment while that further increased to 98.0% after the reverse osmosis (RO) membrane process. The flux of microplastics in MBR effluent was reduced from 1.5 × 10¹³ MPs/d to 10.2 × 10¹¹ MPs/d while that of the RO treatment decreased to 2.7 × 10¹¹ MPs/d. Small scale fiber plastics (<200 μm) could break through RO system according to the size distribution analysis. The application of the IMS system in the reclaimed water plant could prevent most of the microplastics from being discharged in the coastal water. These findings suggested that the IMS system was more efficient than conventional activated sludge system (CAS) for the removal of microplastics, while the discharge of small scale fiber plastics through the IMS system should also not be neglected because small scale fiber plastics (<200 μm) could break through IMS system equipped with the RO system.     

The abundance,characteristics and diversity of microplastics in the South China Sea: Observation around three remote islands

• A high abundance of floating MPs was found in the southern South China Sea. • Transparent film and fiber were predominant in water and organisms, respectively. • 84.7% of floating MPs and 54.5% of MPs in vivo belonged to PP and PE. • Characteristics of MP in organisms were different from those of inshore ones. Surrounded by emerging markets with considerable plastic consumption, the South China Sea has been a focus area of microplastic research. A survey on the floating microplastics (>0.3 mm) and microplastics ingested by fish and mollusks was conducted around three remote islands here. Compared with the results from several previous studies, a high abundance of floating microplastics (with a median of 1.9 × 10⁵ items/km² or 0.7 items/m³) was observed, revealing another “hot spot” for microplastics. Polyolefin, especially polypropylene, was the main component. The diversity index and evenness index were calculated and evaluated based on the composition of microplastics. The characteristic peaks of Raman spectra concerning pigmented microplastics were provided. Transparent sheets/films were predominant in the water sample, which was quite different from a similar study in this sea area (8.9% for film), and only 16.4% of floating microplastics (>0.3 mm) were fibers/lines, implying that the main sources of floating microplastics (>0.3 mm) might be household/agricultural consumption activities. The transparent fiber/line was also dominant in organisms. It is suggested that the main sources of microplastics ingested by organisms might be both fabric fibers and fishing/aquaculture.     

Occurrence and distribution of micro- and mesoplastics in the high-latitude nature reserve,northern China

• The first study on micro(meso)plastics (MMPs) in the Liaohe River Reserve is reported. • Diverse MMP were detected in surface water and sediment at all 32 sites. • The abundance of MMPs decreased in the course of the river. • The MMPs abundance in water is significant association with the county population. Microplastics pollution has received growing attention worldwide in recent years. However, data on microplastics in the freshwater environment are still limited, especially in high-latitude nature reserves in Northern China. The first study on microplastic pollution in the Liaohe River Reserve in Northern China is reported here, and mesoplastics were also incorporated. Surface water and sediment samples were collected from 32 sites along the nature reserve. The abundance, type, shape, color, and size of micro- and mesoplastics were measured using density extraction, optical microscopy, and FTIR spectroscopy. The data showed that diverse micro- and mesoplastics were found widespread in the 32 sites, and the average abundance of these plastics was 0.11±0.04 10⁻² items/L in surface water and 62.29±54.30 items/kg in sediment. Moreover, 70% and 66% were smaller than 2000 μm in surface water and sediment, respectively. Fiber accounted for 91.86% in surface water and 43.48% in sediment, indicating that the major source of micro- and mesoplastics in the Liaohe River Reserve may be domestic sewage and aquaculture. A total of 16 and 27 polymers were identified in surface water and sediment, respectively, and mostly consisted of rayon, polyester, polystyrene, and poly(ethylene terephthalate). Moreover, both the risk index and the pollution load index demonstrated a low risk of micro- and mesoplastics in surface water and sediment in the Liaohe River Reserve.     

A critical review of the emerging research on the detection and assessment of microplastics pollution in the coastal,marine, and urban Bangladesh

● Coastal and marine regions are the most studied for microplastic pollution. ● Tourism is a major cause of microplastic pollution in coastal regions. ● Sediments contain larger microplastics while fish ingest smaller microplastics. ● Inland lakes, rivers, and freshwater fish are impacted by microplastic pollution. ● Microplastics are found in edible salts, however, presence is less in refined salt. The research on the extent and effects of microplastics pollution in the Global South is only getting started. Bangladesh is a South Asian country with one of the fastest growing economies in the world, however, such exponential economic growth has also increased the pollution threats to its natural and urban environment. In this paper, we reviewed the recent primary research on the assessment of the extent of microplastics pollution in Bangladesh. From the online databases, we developed a compilation of emerging research articles that detected and quantified microplastics in different coastal, marine, and urban environments in Bangladesh. Most of the studies focused on the coastal environment (e.g., beach sediment) and marine fish, while limited data were available for the urban environment. We also discussed the relationship of the type of anthropogenic activities with the observed microplastic pollution. The Cox’s Bazar sea beach in south-east Bangladesh experienced microplastics pollution due to tourism activities, while fishing and other anthropogenic activities led to microplastics pollution in the Bay of Bengal. While microplastics larger than 1 mm were prevalent in the beach sediments, smaller microplastics with size below 0.5 mm were prevalent in marine fish samples. Moreover, the differences in microplastic abundance, size, shape, color, and polymer type found were depended on the sampling sites and relevant anthropogenic activities. It is imperative to identify major sources of microplastics pollution in both natural and urban environment, determine potential environmental and human health effects, and develop mitigating and prevention strategies for reducing microplastics pollution.     

Metagenomic analysis on resistance genes in water and microplastics from a mariculture system

• Total 174 subtypes of ARGs were detected by metagenomic analysis. • Chloramphenicol resistance genes were the dominant ARGs in water and microplastics. • The abundances of MRGs were much higher than those of ARGs. • Proteobacteria, Bacteroidetes, and Actinobacteria were the dominant phylum. • Microplastics in mariculture system could enrich most of MRGs and some ARGs. Microplastics existing widely in different matrices have been regarded as a reservoir for emerging contaminants. Mariculture systems have been observed to host microplastics and antibiotic resistance genes (ARGs). However, more information on proliferation of ARGs and metal resistance genes (MRGs) in mariculture system at the presence of microplastics is needed. This study used metagenomic analysis to investigate the distribution of ARGs and MRGs in water and microplastics of a typical mariculture pond. Total 18 types including 174 subtypes of ARGs were detected with the total relative abundances of 1.22/1.25 copies per 16S rRNA copy for microplastics/water. Chloramphenicol resistance genes were the dominant ARGs with the abundance of 0.35/0.42 copies per 16S rRNA copy for microplastics/water. Intergron intI1 was dominant gene among 6 detected mobile genetic elements (MGEs) with the abundance of 75.46/68.70 copies per 16S rRNA copy for water/microplastics. Total 9 types including 46 subtypes of MRGs were detected with total abundance of 5.02 × 10²/6.39 × 10² copies per 16S rRNA copy for water/ microplastics while genes resistant to copper and iron served as the dominant MRGs. Proteobacteria, Bacteroidetes, and Actinobacteria accounted for 84.2%/89.5% of total microbial community. ARGs with relatively high abundance were significantly positively related to major genera, MGEs, and MRGs. Microplastics in mariculture system could enrich most of MRGs and some ARGs to serve as potential reservoir for these pollutants. The findings of this study will provide important information on resistance gene pollution at presence of microplastics in the mariculture system for further proposing suitable strategy of environmental management.     

Characterization and seasonal distribution of microplastics in the nearshore sediments of the south-east coast of India,Bay of Bengal

• MPs in the coastal sediment of south-east coast of India are quantified. • High MPs are recorded near river mouths and nearshore regions. • Polyethylene and polypropylene are the major polymers observed. • MPs contamination is higher than the values reported elsewhere. In view of increasing Microplastics (MPs) contamination in the marine environment and dearth of baseline data, a study was conducted on the abundance, characterization, and seasonal distribution of MPs in the nearshore sediments of the south-east coast of India. Sediment samples (n = 130) were collected at a distance of 1 km and 10 km from the shore region at varying depths (8–45 m) along the Chennai to Puducherry coast (165 km stretch), representing two seasons, i.e., south-west (July 2019 and July 2020) and north-east (January 2020) monsoons. The average abundance of MPs at the 22 offshore sites along the Chennai to Puducherry coast varied from 9±4.3 to 19±12.9 particles/50 g dry weight, in July 2019 and January 2020, respectively. July 2020 had an average abundance of 10±4.5 particles/50 g dry weight. Spatially, high levels of MPs were found at 1km stations and transects in proximity to the river inlets, and temporally, the north-east month recorded the maximum concentration. The dominant morphotype was the filament, and the major polymers were polyethylene and polypropylene. Scanning Electron Microscope (SEM) images revealed the surface irregularity and degradation of MPs due to weathering. The study highlights that high sediment contamination by MPs occurs during heavy rainfall and accumulates closer to river inlets. Eventually, this study suggests that appropriate management of plastic wastes on the landside will reduce MP contamination in the marine environment.     

Microplastics removal strategies: A step toward finding the solution

• Physical, chemical and biological methods are explored for MPs removal. • Physical methods based on adsorption/filtration are mostly used for MPs removal. • Chemical methods of MPs removal work on coagulation and flocculation mechanism. • MBR technology has also shown the removal of MPs from water. • Global policy on plastic control is lacking. Microplastics are an emerging threat and a big challenge for the environment. The presence of microplastics (MPs) in water is life-threatening to diverse organisms of aquatic ecosystems. Hence, the scientific community is exploring deeper to find treatment and removal options of MPs. Various physical, chemical and biological methods are researched for MPs removal, among which few have shown good efficiency in the laboratory. These methods also have a few limitations in environmental conditions. Other than finding a suitable method, the creation of legal restrictions at a governmental level by imposing policies against MPs is still a daunting task in many countries. This review is an effort to place all effectual MP removal methods in one document to compare the mechanisms, efficiency, advantages, and disadvantages and find the best solution. Further, it also discusses the policies and regulations available in different countries to design an effective global policy. Efforts are also made to discuss the research gaps, recent advancements, and insights in the field.     

Effect of gastric fluid on adsorption and desorption of endocrine disrupting chemicals on microplastics

• Effect of gastric fluid on EDCs adsorption-desorption to microplastics was evaluated. • The gastric fluid enhanced desorption of EDCs on the surface of microplastics. • Adsorption and desorption isotherms fitted the Freundlich model well. • Desorption ratios of EE2 (55%–59%) on PVC were larger than that of E2 (49%–55%). • Decrease in pH and increase in ionic strength in gastric fluid strengthen desorption. Microplastics and endocrine disrupting chemicals are emerging pollutants in the marine environment because of their potential hazards. The effect of gastric fluid on the adsorption and desorption of 17β-estradiol (E2) and 17α-ethynylestradiol (EE2) to microplastics was investigated. The adsorption and desorption isotherms of E2/EE2 on microplastics could be well fitted by the Freundlich model while the Gibbs free energy of these processes were negative, proving that the reaction occurred spontaneously on the heterogeneous surface of the microplastics. Desorption ratios of EE2 (55%–59%) on PVC were larger than that of E2 (49%–55%) to indicate that EE2 was less stable in gastric fluid, which could be explained by the fact that the hydrophobicity of EE2 was greater than E2. E2/EE2 were more easily desorbed from PVC in the gastric fluid and the desorption amount (5.25–12.91/7.19–17.86 μg/g) increased by 2.51 times in comparison with that in saline solution (2.22–7.81/2.87–10.80 μg/g). The decrease of pH and the increase of ionic strength in gastric fluid could further strengthen desorption of E2/EE2 from PVC. The promotion of gastric juice on desorption of PVC was achieved by reducing the hydrophobicity of the PVC surface. The desorption rate of E2/EE2 at 18°C and 38°C was respectively 44%–47%/46%–50% and 49%–55%/56%–59%, indicating that PVC loaded with E2/EE2 had a relatively greater risk of releasing pollutants in the gastric fluid of constant temperature marine organisms while higher temperatures exposed higher hazards for variable temperature animals. The interaction between microplastics and pollutants might be mainly hydrophobic interaction.     

Nutrient status and pollution levels in five areas around a manganese mine in southern China

• The soil TP level was high or extremely high in all areas. • TN, OM and available Cu were insufficient in EA, TA and RA. • All areas reached the heavily polluted level and had high ecological risk levels. • Mn and Cd were the dominant pollutants. Nutrient status and pollution levels are the main factors affecting soil restoration. The nutrient status and pollution levels in five areas, an unexplored mine area (UA), an explored mine area (EA), a tailings area (TA), a reclamation area (RA) and an agricultural area (AA), around the Pingle manganese mine in Guangxi, China, were assessed in this study. The results showed that the average total phosphorus in these five areas ranged from 1.05 to 1.57 mg/kg, corresponding to grades of extremely high and high. The average total nitrogen values were 0.19, 0.69, 0.93, 1.24 and 1.67 mg/kg in EA, TA, RA, UA and AA, corresponding to grades of very low, low, medium-low, medium-high and medium-high, respectively. The average organic matter values were 12.78, 8.92, 22.77, 21.29 and 29.11 mg/kg in EA, TA, RA, UA and AA, which corresponded to grades of medium-low, low, medium-high, medium-high and medium-high, respectively. All these results indicated that the total phosphorus was sufficient in these areas, while the total nitrogen and organic matter were insufficient in EA, TA and RA. The available concentrations of Mn and Zn corresponded to the intermediate grade, while the values for Cu corresponded to the very low grade; these might be another factor restricting ecological reclamation. Contamination and ecological risk assessments based on the single contamination index, Nemerow multi-factor index and potential ecological risk index showed that the five tested areas around the Mn mine were considered heavily polluted and presented high ecological risk. Mn and Cd were the dominant pollutants.     

Electricity-driven ammonia oxidation and acetate production in microbial electrosynthesis systems

• MES was constructed for simultaneous ammonia removal and acetate production. • Energy consumption was different for total nitrogen and ammonia nitrogen removal. • Energy consumption for acetate production was about 0.04 kWh/g. • Nitrate accumulation explained the difference of energy consumption. • Transport of ammonia and acetate across the membrane deteriorated the performance. Microbial electrosynthesis (MES) is an emerging technology for producing chemicals, and coupling MES to anodic waste oxidation can simultaneously increase the competitiveness and allow additional functions to be explored. In this study, MES was used for the simultaneous removal of ammonia from synthetic urine and production of acetate from CO₂. Using graphite anode, 83.2%±5.3% ammonia removal and 28.4%±9.9% total nitrogen removal was achieved, with an energy consumption of 1.32 kWh/g N for total nitrogen removal, 0.45 kWh/g N for ammonia nitrogen removal, and 0.044 kWh/g for acetate production. Using boron-doped diamond (BDD) anode, 70.9%±12.1% ammonia removal and 51.5%±11.8% total nitrogen removal was obtained, with an energy consumption of 0.84 kWh/g N for total nitrogen removal, 0.61 kWh/g N for ammonia nitrogen removal, and 0.043 kWh/g for acetate production. A difference in nitrate accumulation explained the difference of total nitrogen removal efficiencies. Transport of ammonia and acetate across the membrane deteriorated the performance of MES. These results are important for the development of novel electricity-driven technologies for chemical production and pollution removal.     

What have we known so far for fluorescence staining and quantification of microplastics: A tutorial review

• Fluorescence staining provides a fast and easy method to quantify microplastics. • Factors that influence staining are summarized to obtain an optimum staining effect. • Natural organic matter can be stained by dye and interfere with quantification. • Fluorescence staining is applied in both field and laboratory studies. • Future work involves developing new dyes and automated image-analysis methods. Understanding the fate and toxicity of microplastics (MPs,<5 mm plastic particles) is limited by quantification methods. This paper summarizes the methods in use and presents new ones. First, sampling and pretreatment processes of MPs, including sample collection, digestion, density separation, and quality control are reviewed. Then the promising and convenient staining procedures and quantification methods for MPs using fluorescence dyes are reviewed. The factors that influence the staining of MPs, including their physicochemical properties, are summarized to provide an optimal operation procedure. In general, the digestion step is crucial to eliminate natural organic matter (NOM) to avoid interference in quantification. Chloroform was reported to be the most appropriate solvent, and 10–20 μg/mL are recommended as optimal dye concentrations. In addition, a heating and cooling procedure is recommended to maintain the fluorescence intensity of MPs for two months. After staining, a fluorescence microscope is usually used to characterize the morphology, mass, or number of MPs, but compositional analysis cannot be determined with it. These fluorescence staining methods have been implemented to study MP abundance, transport, and toxicity and have been combined with other chemical characterization techniques, such as Fourier transform infrared spectroscopy and Raman spectroscopy. More studies are needed to focus on the synthesis of novel dyes to avoid NOM’s interference. They need to be combined with other spectroscopic techniques to characterize plastic composition and to develop image-analysis methods. The stability of stained MPs needs to be improved.     

Review on remediation technologies for arsenic-contaminated soil

• Recent progress of As-contaminated soil remediation technologies is presented. • Phytoextraction and chemical immobilization are the most widely used methods. • Novel remediation technologies for As-contaminated soil are still urgently needed. • Methods for evaluating soil remediation efficiency are lacking. • Future research directions for As-contaminated soil remediation are proposed. Arsenic (As) is a top human carcinogen widely distributed in the environment. As-contaminated soil exists worldwide and poses a threat on human health through water/food consumption, inhalation, or skin contact. More than 200 million people are exposed to excessive As concentration through direct or indirect exposure to contaminated soil. Therefore, affordable and efficient technologies that control risks caused by excess As in soil must be developed. The presently available methods can be classified as chemical, physical, and biological. Combined utilization of multiple technologies is also common to improve remediation efficiency. This review presents the research progress on different remediation technologies for As-contaminated soil. For chemical methods, common soil washing or immobilization agents were summarized. Physical technologies were mainly discussed from the field scale. Phytoextraction, the most widely used technology for As-contaminated soil in China, was the main focus for bioremediation. Method development for evaluating soil remediation efficiency was also summarized. Further research directions were proposed based on literature analysis.     

A “Seawater-in-Sludge” approach for capacitive biochar production via the alkaline and alkaline earth metals activation

• Capacitive biochar was produced from sewage sludge. • Seawater was proved to be an alternative activation agent. • Minerals vaporization increased the surface area of biochar. • Molten salts acted as natural templates for the development of porous structure. Sewage sludge is a potential precursor for biochar production, but its effective utilization involves costly activation steps. To modify biochar properties while ensuring cost-effectiveness, we examined the feasibility of using seawater as an agent to activate biochar produced from sewage sludge. In our proof-of-concept study, seawater was proven to be an effective activation agent for biochar production, achieving a surface area of 480.3 m²/g with hierarchical porosity distribution. Benefited from our design, the catalytic effect of seawater increased not only the surface area but also the graphitization degree of biochar when comparing the pyrolysis of sewage sludge without seawater. This leads to seawater activated biochar electrodes with lower resistance, higher capacitance of 113.9 F/g comparing with control groups without seawater. Leveraging the global increase in the salinity of groundwater, especially in coastal areas, these findings provide an opportunity for recovering a valuable carbon resource from sludge.     

Using hydrochemical signatures to characterize the long-period evolution of groundwater information in the Dagu River Basin,China

• The long-period groundwater evolution was identified by hydrochemical signatures. • The dominant processes in the groundwater evolution were verified. • Groundwater quality in the coastal areas was susceptible to deterioration due to SI. • Groundwater contamination arose from fertilizer, livestock manure & domestic sewage. The evolution of hydrochemical compositions influenced by long-period interactions between groundwater and the geo-environment is a fundamental issue for exploring groundwater quality and vulnerability. This study systematically investigated the hydrochemical processes and anthropogenic interference occurring in the river basin by bivariate plots, Gibbs diagrams, saturation index, and the major ions ratios. Apparent changes in groundwater hydrochemistry have been observed in the study area, illustrating the origins of major ions are affected by various internal and external factors. Results highlighted that TDS varied from freshwater to brackish water, ranging between 187.90 and 2294.81 mg/L. Ca²⁺ and HCO₃⁻ are the dominant ions in the studied samples. The results gained by Gibbs diagrams, bivariate plots, saturation index, and the major ions ratios demonstrated that minerals dissolution/precipitation, cation exchange, and human inputs play crucial roles in the unconfined aquifers. Moreover, the overuse of nitrogen fertilizer, livestock manure, and industrial/domestic sewage led to nitrate and nitrite contamination and brought significant challenges to the surrounding hydrogeo-environment. The present study could make an unambiguous identification of natural processes and anthropogenic interventions influencing groundwater hydrochemistry’s long-period evolution and create a preliminary strategy for groundwater resources management.     

Sulfur mediated heavy metal biogeochemical cycles in coastal wetlands: From sediments,rhizosphere to vegetation

• In sediments, the transformation of sulfides may lead to the release of heavy metals. • In the rhizosphere, sulfur regulates the uptake of heavy metals by plants. • In plants, sulfur mediates a series of heavy metal tolerance mechanisms. • Explore interactions between sulfur and heavy metals on different scales is needed. The interactions and mechanisms between sulfur and heavy metals are a growing focus of biogeochemical studies in coastal wetlands. These issues underline the fate of heavy metals bound in sediments or released into the system through sediments. Despite the fact that numerous published studies have suggested sulfur has a significant impact on the bioavailability of heavy metals accumulated in coastal wetlands, to date, no review article has systematically summarized those studies, particularly from the perspective of the three major components of wetland ecosystems (sediments, rhizosphere, and vegetation). The present review summarizes the studies published in the past four decades and highlights the major achievements in this field. Research and studies available thus far indicate that under anaerobic conditions, most of the potentially bioavailable heavy metals in coastal wetland sediments are fixed as precipitates, such as metal sulfides. However, fluctuations in physicochemical conditions may affect sulfur cycling, and hence, directly or indirectly lead to the conversion and migration of heavy metals. In the rhizosphere, root activities and microbes together affect the speciation and transformation of sulfur which in turn mediate the migration of heavy metals. As for plant tissues, tolerance to heavy metals is enhanced by sulfur-containing compounds via promoting a series of chelation and detoxification processes. Finally, to further understand the interactions between sulfur and heavy metals in coastal wetlands, some major future research directions are proposed.     

Evaluating heavy metal contamination of riverine sediment cores in different land-use areas

• Metal pollution was studied in riverine sediments from different land-use areas. • Cd was the most serious heavy metal contaminant in riverine sediment cores. • Riverine sediment cores from industrial area were most polluted by heavy metals. • B1 fraction determined metal pollution, risk and toxicity in riverine sediments. Anthropogenic activities are regarded as the main sources of heavy metal pollution, yet few studies have investigated the effects of land-use setting on heavy metal accumulation in riverine sediments. Based on both total contents and geochemical fractions, heavy metal pollution, risk and toxicity were determined in riverine sediment cores from different land-use areas (mountain area- MA, farm area- FA, city area- CA, and industrial area- IA) of the Yang River Basin in North China. The results showed that FA had higher contents of riverine sedimentary Cu; CA had higher contents of Cd; IA had higher contents of both Cd and Zn. Most riverine sediments from FA and IA were contaminated with the investigated metals, although these concentrations were evaluated to have low potential ecological risk and no toxicity to benthic organisms. However, a high proportion of Cd in the B1 fraction of riverine sediments in IA indicating high risk should receive more attention. The B1 fraction largely determined the contamination, risk and toxicity levels associated with heavy metals in the riverine sediments of the Yang River Basin.     

Distribution of antibiotic resistance genes and their association with bacteria and viruses in decentralized sewage treatment facilities

• Distribution of ARGs in decentralized sewage facilities were investigated. • Bacitracin-ARGs were most predominant ARGs in rural wastewater. • ARGs were identified in bacterial and viral community. • ARGs of rpoB, drfE, gyrA and parC were both correlated with bacteria and phages. • More attention should be paid to the risk of spreading ARG by phages. The distribution of antibiotic resistance genes (ARGs) has been intensively studied in large-scale wastewater treatment plants and livestock sources. However, small-scale decentralized sewage treatment facilities must also be explored due to their possible direct exposure to residents. In this study, six wastewater treatment facilities in developed rural areas in eastern China were investigated to understand their risks of spreading ARGs. Using metagenomics and network analysis tools, ARGs and bacterial and viral communities were identified in the influent (INF) and effluent (EFF) samples. The dominant ARGs belonged to the bacitracin class, which are different from most of municipal wastewater treatment plants (WWTPs). The dominant hosts of ARGs are Acidovorax in bacterial communities and Prymnesiovirus in viral communities. Furthermore, a positive relationship was found between ARGs and phages. The ARGs significantly correlated with phages were all hosted by specific genera of bacteria, indicating that phages had contributed to the ARG’s proliferation in sewage treatment facilities. Paying significant concern on the possible enhanced risks caused by bacteria, viruses and their related ARGs in decentralized sewage treatment facilities is necessary.     

Effects of hydraulic retention time on net present value and performance in a membrane bioreactor treating antibiotic production wastewater

• The membrane bioreactor cost decreased by 38.2% by decreasing HRT from 72 h to 36 h. • Capital and operation costs contributed 62.1% and 37.9% to decreased costs. • The membrane bioreactor is 32.6% cheaper than the oxidation ditch for treatment. • The effluent COD also improved from 709.93±62.75 mg/L to 280±17.32 mg/L. • Further treatment also benefited from lower pretreatment investment. A cost sensitivity analysis was performed for an industrial membrane bioreactor to quantify the effects of hydraulic retention times and related operational parameters on cost. Different hydraulic retention times (72–24 h) were subjected to a flat-sheet membrane bioreactor updated from an existing 72 h oxidation ditch treating antibiotic production wastewater. Field experimental data from the membrane bioreactor, both full-scale (500 m³/d) and pilot (1.0 m³/d), were used to calculate the net present value (NPV), incorporating both capital expenditure (CAPEX) and operating expenditure. The results showed that the tank cost was estimated above membrane cost in the membrane bioreactor. The decreased hydraulic retention time from 72 to 36 h reduced the NPV by 38.2%, where capital expenditure contributed 24.2% more than operational expenditure. Tank construction cost was decisive in determining the net present value contributed 62.1% to the capital expenditure. The membrane bioreactor has the advantage of a longer lifespan flat-sheet membrane, while flux decline was tolerable. The antibiotics decreased to 1.87±0.33 mg/L in the MBR effluent. The upgrade to the membrane bioreactor also benefited further treatments by 10.1%–44.7% lower direct investment.