Recent advances in electrochemical decontamination of perfluorinated compounds from water: a review

● Recent advances in the electrochemical decontamination of PFAS are reviewed. ● Underlying mechanisms and impacting factors of these processes are discussed. ● Several novel couped systems and electrode materials are emphasized. ● Major knowledge gaps and research prospects on PFAS removal are identified. Per- and polyfluoroalkyl substances (PFAS) pose serious human health and environmental risks due to their persistence and toxicity. Among the available PFAS remediation options, the electrochemical approach is promising with better control. In this review, recent advances in the decontamination of PFAS from water using several state-of-the-art electrochemical strategies, including electro-oxidation, electro-adsorption, and electro-coagulation, were systematically reviewed. We aimed to elucidate their design principles, underlying working mechanisms, and the effects of operation factors (e.g., solution pH, applied voltage, and reactor configuration). The recent developments of innovative electrochemical systems and novel electrode materials were highlighted. In addition, the development of coupled processes that could overcome the shortcomings of low efficiency and high energy consumption of conventional electrochemical systems was also emphasized. This review identified several major knowledge gaps and challenges in the scalability and adaptability of efficient electrochemical systems for PFAS remediation. Materials science and system design developments are forging a path toward sustainable treatment of PFAS-contaminated water through electrochemical technologies.     

Photo-induced surface frustrated Lewis pairs for promoted photocatalytic decomposition of perfluorooctanoic acid

● Terminal carboxylate group activation is PFOA degradation’s rate-limiting step. ● Bi₃O(OH)(PO₄)₂ with surface frustrated Lewis pairs (SFLPs) efficiently degrade PFOA. ● Photo-induced Lewis acidic sites and proximal surface hydroxyls constitute SFLPs. ● SFLPs act as collection centers to effectively adsorb PFOA. ● SFLPs endow accessible pathways for photogenerated holes rapid transfer to PFOA. Heterogeneous photocatalysis has gained substantial research interest in treating per- and polyfluoroalkyl substances (PFAS)-contaminated water. However, sluggish degradation kinetics and low defluorination efficiency compromise their practical applications. Here, we report a superior photocatalyst, defected Bi₃O(OH)(PO₄)₂, which could effectively degrade typical PFAS, perfluorooctanoic acid (PFOA), with high defluorination efficiency. The UV light irradiation could in situ generate oxygen vacancies on Bi₃O(OH)(PO₄)₂ through oxidation of the lattice hydroxyls, which further promotes the formation of Lewis acidic coordinately unsaturated bismuth sites. Then, the Lewis acidic sites couple with the proximal surface hydroxyls to constitute the surface frustrated Lewis pairs (SFLPs). With the in-depth spectroscopic analysis, we revealed that the photo-induced SFLPs act as collection centers to effectively adsorb PFOA and endow accessible pathways to transfer photogenerated holes to PFOA rapidly. Consequently, activation of the terminal carboxyl, a rate-limiting step for PFOA decomposition, could be easily achieved over the defected Bi₃O(OH)(PO₄)₂ photocatalyst. These results suggest that SFLPs exhibit great potential in developing highly efficient photocatalysts to degrade persistent organic pollutants.     

Data quality assessment for studies investigating microplastics and nanoplastics in food products: Are current data reliable?

● Data quality assessment criteria for MP/NPs in food products were developed. ● Data quality of 71 data records (69 of them only focused on MPs) was assessed. ● About 96% of the data records were considered unreliable in at least one criterion. ● Improvements need to be made regarding positive controls and polymer identification. ● A mismatch between MP/NPs used in toxicity studies and those in foods was recorded. Data on the occurrence of microplastics and nanoplastics (MP/NPs) in foods have been used to assess the human health risk caused by the consumption of MP/NPs. The reliability of the data, however, remains unclear because of the lack of international standards for the analysis of MP/NPs in foods. Therefore, the data quality needs to be assessed for accurate health risk assessment. This study developed 10 criteria applicable to the quality assessment of data on MP/NPs in foods. Accordingly, the reliability of 71 data records (69 of them only focused on MPs) was assessed by assigning a score of 2 (reliable without restrictions), 1 (reliable but with restrictions), or 0 (unreliable) on each criterion. The results showed that only three data records scored 2 or 1 on all criteria, and six data records scored 0 on as many as six criteria. A total of 58 data records did not include information on positive controls, and 12 data records did not conduct the polymer identification, which could result in the overestimation or underestimation of MP/NPs. Our results also indicated that the data quality of unprocessed foods was more reliable than that of processed foods. Furthermore, we proposed a quality assurance and quality control protocol to investigate MP/NPs in foods. Notably, the characteristics of MP/NPs used in toxicological studies and those existing in foods showed a remarkable discrepancy, causing the uncertainty of health risk assessment. Therefore, both the estimated exposure of MP/NPs and the claimed potential health risks should be treated with caution.     

Effects of manufactured nanomaterials on algae: Implications and applications

● Summary of positive and negative effects of MNMs on algae. ● MNMs adversely affect algal gene expression, metabolite, and growth. ● MNMs induce oxidative stress, mechanical damage and light-shielding effects on algae. ● MNMs can promote production of bioactive substances and environmental remediation. The wide application of manufactured nanomaterials (MNMs) has resulted in the inevitable release of MNMs into the aquatic environment along their life cycle. As the primary producer in aquatic ecosystems, algae play a critical role in maintaining the balance of ecosystems’ energy flow, material circulation and information transmission. Thus, thoroughly understanding the biological effects of MNMs on algae as well as the underlying mechanisms is of vital importance. We conducted a comprehensive review on both positive and negative effects of MNMs on algae and thoroughly discussed the underlying mechanisms. In general, exposure to MNMs may adversely affect algae’s gene expression, metabolites, photosynthesis, nitrogen fixation and growth rate. The major mechanisms of MNMs-induced inhibition are attributed to oxidative stress, mechanical damages, released metal ions and light-shielding effects. Meanwhile, the rational application of MNMs-algae interactions would promote valuable bioactive substances production as well as control biological and chemical pollutants. Our review could provide a better understanding of the biological effects of MNMs on algae and narrow the knowledge gaps on the underlying mechanisms. It would shed light on the investigation of environmental implications and applications of MNMs-algae interactions and meet the increasing demand for sustainable nanotechnology development.     

Mechanism and characterization of microplastic aging process: A review

● Methods for estimating the aging of environmental micro-plastics were highlighted. ● Aging pathways & characterization methods of microplastics were related and reviewed. ● Possible approaches to reduce the contamination of microplastics were proposed. ● The prospect and deficiency of degradable plastics were analyzed. With the increasing production of petroleum-based plastics, the problem of environmental pollution caused by plastics has aroused widespread concern. Microplastics, which are formed by the fragmentation of macro plastics, are bio-accumulate easily due to their small size and slow degradation under natural conditions. The aging of plastics is an inevitable process for their degradation and enhancement of adsorption performance toward pollutants due to a series of changes in their physiochemical properties, which significantly increase the toxicity and harm of plastics. Therefore, studies should focus on the aging process of microplastics through reasonable characterization methods to promote the aging process and prevent white pollution. This review summarizes the latest progress in natural aging process and characterization methods to determine the natural aging mechanism of microplastics. In addition, recent advances in the artificial aging of microplastic pollutants are reviewed. The degradation status and by-products of biodegradable plastics in the natural environment and whether they can truly solve the plastic pollution problem have been discussed. Findings from the literature pointed out that the aging process of microplastics lacks professional and exclusive characterization methods, which include qualitative and quantitative analyses. To lessen the toxicity of microplastics in the environment, future research directions have been suggested based on existing problems in the current research. This review could provide a systematic reference for in-depth exploration of the aging mechanism and behavior of microplastics in natural and artificial systems.     

V-shaped substrate for surface and volume enhanced Raman spectroscopic analysis of microplastics

● V-shaped substrate was obtained for SERS analysis of microplastics (diameter ≈ 1 μm). ● Enhancement factor of V-shaped substrate can reach 20 in microplastics detection. ● V-shaped nanopore array can bring additional volume enhancement. ● V-shaped substrate was more economic in application compared to Klarite substrate. Research on the microplastics (MPs) is developing towards smaller size, but corresponding methods for the rapid and accurate detection of microplastics, especially nanoplastics still present challenge. In this work, a novel surface and volume enhanced Raman spectroscopy substrate was developed for the rapid detection of microplastic particles below 5 μm. The gold nanoparticles (NPs) were deposited onto the surface and into the V-shaped nanopores of anodized aluminum oxide (AAO) through magnetron sputtering or ion sputtering, and then AuNPs@V-shaped AAO SERS substrate was obtained and studied for microplastic detection. SERS performance of AuNPs@V-shaped AAO SERS substrate was evaluated through the detection of polystyrene and polymethyl methacrylate microspheres. Results indicated that individual polystyrene sphere with a diameter of 1 μm can be well detected on AuNPs@V-shaped AAO SERS substrate, and the maximum enhancement factor (EF) can reach 20. In addition, microplastics in ambient atmospheric samples were collected and tested to verify the effectiveness of the AuNPs@V-shaped AAO SERS substrate in the real environment. This study provides a rapid, economic and simple method for detecting and identifying microplastics with small size.     

Electroconductive RGO-MXene membranes with wettability-regulated channels: improved water permeability and electro-enhanced rejection performance

● Electroconductive RGO-MXene membranes were fabricated. ● Wettable membrane channels were established between RGO and MXene nanosheets. ● Hydrophilic MXene reduces the resistance of water entering the membrane channels. ● Water permeance of RGO-MXene membrane is 16.8 times higher than that of RGO membrane. ● Electro-assistance can enhance the dye rejection performance of RGO-MXene membrane. Reduced graphene oxide (RGO) membranes are theoretically more conducive to the rapid transport of water molecules in their channels compared with graphene oxide (GO) membranes, as they have fewer oxygen-containing functional groups and more non-oxidized regions. However, the weak hydrophilicity of RGO membranes inhibits water entry into their channels, resulting in their low water permeability. In this work, we constructed wettable RGO-MXene channels by intercalating hydrophilic MXene nanosheets into the RGO membrane for improving the water permeance. The RGO-MXene composite membrane exhibits high pure water permeance of 62.1 L/(m²·h·bar), approximately 16.8 times that of the RGO membrane (3.7 L/(m²·h·bar)). Wettability test results and molecular dynamics simulations suggest that the improved water permeance results from the enhanced wettability of RGO-MXene membrane and increased rate of water molecules entering the RGO-MXene channels. Benefiting from good conductivity, the RGO-MXene membrane with electro-assistance exhibits significantly increased rejection rates for negatively charged dyes (from 56.0% at 0 V to 91.4% at 2.0 V for Orange G) without decreasing the permeate flux, which could be attributed to enhanced electrostatic repulsion under electro-assistance.     

Microplastics in municipal wastewater treatment plants: a case study of Denizli/Turkey

● High amounts of microplastics are released to receiving media from WWTPs. ● The effect of classical treatment processes on MP removal is important. ● MP load in the effluent of WWTPs is important for developing treatment technology. ● Additional physical treatment could help further reduce MP discharge. Plastic particles smaller than 5 mm are microplastics. They are among the significant pollutants that recently attracted attention. Great quantities of microplastics enter the sewage system daily and reach wastewater treatment plants (WWTPs). As a result, WWTPs are potential microplastic sources. Hence, they create a pathway for microplastics to reach aquatic environments with treated wastewater discharge. Studies on microplastic characterization in WWTPs have gained momentum in academia. This study investigates the abundance, size, shape, color, polymer type, and removal efficiencies of microplastics in a municipal wastewater treatment plant (WWTP) in Denizli/Turkey. The results showed that the dominant microplastic shape in wastewater samples was fibers (41.78%–60.77%) in the 100–500 µm (58.57%–80.07%) size range. Most of the microplastics were transparent-white (32.86%–58.93%). The dominant polymer types were polyethylene (54.05%) and polyethylene vinyl acetate (37.84%) in raw wastewater. Furthermore, the microplastic removal efficiencies of the Denizli Central WWTP as a whole and for individual treatment units were evaluated. Although the microplastic pollution removal efficiency of the Denizli Central WWTP was over 95%, the microplastic concentration discharged daily into the receiving environment was considerably high (1.28 × 10¹⁰ MP/d). Thus, Denizli Central WWTP effluents result in a high volume of emissions in terms of microplastic pollution with a significant daily discharge to the Çürüksu Stream.     

Predicting the elemental compositions of solid waste using ATR-FTIR and machine learning

● A method based on ATR-FTIR and ML was developed to predict CHNS contents in waste. ● Feature selection methods were used to improve models’ prediction accuracy. ● The best model predicted C, H, and N contents with accuracy R ² ≥ 0.93, 0.87, 0.97. ● Some suitable models showed insensitivity to spectral noise. ● Under moisture interference, the models still had good prediction performance. Elemental composition is a key parameter in solid waste treatment and disposal. This study has proposed a method based on infrared spectroscopy and machine learning algorithms that can rapidly predict the elemental composition (C, H, N, S) of solid waste. Both noise and moisture spectral interference that may occur in practical application are investigated. By comparing two feature selection methods and five machine learning algorithms, the most suitable models are selected. Moreover, the impacts of noise and moisture on the models are discussed, with paper, plastic, textiles, wood, and leather as examples of recyclable waste components. The results show that the combination of the feature selection and K-nearest neighbor (KNN) approaches exhibits the best prediction performance and generalization ability. Particularly, the coefficient of determination (R²) of the validation set, cross validation and test set are higher than 0.93, 0.89, and 0.97 for predicting the C, H, and N contents, respectively. Further, KNN is less sensitive to noise. Under moisture interference, the combination of feature selection and support vector regression or partial least-squares regression shows satisfactory results. Therefore, the elemental compositions of solid waste are quickly and accurately predicted under noise and moisture disturbances using infrared spectroscopy and machine learning algorithms.     

Resource utilization of typical biomass wastes as biochars in removing plasticizer diethyl phthalate from water: characterization and adsorption mechanisms

● Six largely produced agricultural biomass wastes were pyrolyzed into biochars. ● Feedstock type significantly determined physiochemical properties of biochars. ● The biochars showed powerful adsorption capabilities to Plasticizer DEP. ● Giant reed biochar with higher DEP adsorption was a prominent sorbent. Plastic pollution as a global environmental issue has become a research hotspot, among which the removal of inherent plasticizer (e.g., phthalic acid esters, PAEs) received increasing attention. However, the effects of biochars derived from different feedstocks on the adsorption of PAEs are poorly understood. Thus, the characteristics of biochars derived from six largely produced biomass wastes in China at 400 °C, as well as their performance in adsorption of diethyl phthalate (DEP), one of frequently detected PAEs in aqueous environment, were investigated. The results indicated that the variation in feedstock type showed significant changes in the properties (e.g., porosity, specific surface area, surface functional groups) of biochars, which affected DEP adsorption and desorption. Pseudo-second order and Freundlich models fitted the adsorption data well, and adsorption mechanisms mainly included hydrophobic effect, followed by micropore filling, hydrogen bonding, and π-π EDA interactions. Adsorption thermodynamics revealed that the adsorption was a spontaneous and exothermic the adsorption capacities of DEP on these biochars slightly decreased with the increasing pH but increased with the increasing ionic strength. Among these biochars, the giant reed biochar with relatively higher DEP adsorption and low desorption exhibited the great efficiency for DEP removal as an environment-friendly sorbent. These results highlighted the significant roles of micropore filling and hydrogen bond in determining adsorption capacity of designed biochars prepared from selecting suitable agricultural straws and wetland plant waste to typical plasticizer. The findings are useful for producing designed biochars from different biomass wastes for plasticizer pollution control.     

Stress response to nanoplastics with different charges in Brassica napus L. during seed germination and seedling growth stages

● Higher concentrations of PS, PS-NH₂ and PS-SO₃H inhibited seed germination. ● PS, PS-NH₂ and PS-SO₃H influenced seedling growth in a dose-dependent manner. ● PS, PS-NH₂ and PS-SO₃H reduced essential nutrients uptake and plant quality. ● PS, PS-NH₂ and PS-SO₃H increased antioxidant enzyme activities and MDA content. ● Nanoplastic toxicity was related to surface charges. Nanoplastic pollution has become a significant problem in farmland systems worldwide. However, research on the effects of nanoplastics (NPs) with different charges on field crops is still limited. In our study, NPs with different charges, including unmodified polystyrene nanoplastics (PS), positively charged polystyrene nanoplastics (PS-NH₂), and negatively charged polystyrene nanoplastics (PS-SO₃H), were investigated for their impacts on seed germination and seedling growth of rape. The results showed that seed water uptake (after 12 h), seed germination, seed vigour, and relative root elongation were all significantly reduced under exposure to NPs (200 mg/L). Similarly, remarkable decreases in plant biomass (root weight, shoot weight), growth (root length, plant height), photosynthesis ability (chlorophyll a, chlorophyll b, carotenoids), essential nutrient uptake (Fe, Mn, Zn, Cu), and plant quality (soluble protein, soluble sugar, crude fibre content) of rape seedlings were also observed after exposure to NPs. Among the three kinds of NPs, PS-NH₂ showed stronger effects. Moreover, superoxide dismutase, peroxidase, and catalase activities of rape seedlings were changed, and the content of malondialdehyde was significantly increased under exposure to NPs. Furthermore, positively charged PS-NH₂ showed stronger effects on the phenotype, physiology, biochemistry, nutrient uptake, and plant quality of rape. Notably, a comprehensive toxicity evaluation revealed that PS-NH₂ had the strongest toxicity to rape. The present study provides important implications for the interaction and risk assessment of NPs and crops in soil-plant systems.     

Effectiveness of tertiary treatment processes in removing different classes of emerging contaminants from domestic wastewater

● Different advanced treatment processes were tested for ECs removal from wastewater. ● UV radiation showed low to moderate removal for 5 of the 38 micropollutants. ● Among tested membrane processes, nanofiltration showed the better performance. ● The use of PAC achieved high or partially removal for 31 out of the 38 compounds. ● The environmental and economical evaluation of a pilot-scale PAC unit is suggested. In this work, 38 different organic emerging contaminants (ECs), belonging to various chemical classes such as pharmaceuticals (PhCs), endocrine-disrupting chemicals (EDCs), benzotriazoles (BTRs), benzothiazoles (BTHs), and perfluorinated compounds (PFCs), were initially identified and quantified in the biologically treated wastewater collected from Athens’ (Greece) Sewage Treatment Plant (STP). Processes already used in existing STPs such as microfiltration (MF), nanofiltration (NF), ultrafiltration (UF), UV radiation, and powdered activated carbon (PAC) were assessed for ECs’ removal, under the conditions that represent their actual application for disinfection or advanced wastewater treatment. The results indicated that MF removed only one out of the 38 ECs and hence it was selected as pretreatment step for the other processes. UV radiation in the studied conditions showed low to moderate removal for 5 out of the 38 ECs. NF showed better results than UF due to the smaller pore sizes of the filtration system. However, this enhancement was observed mainly for 8 compounds originating from the classes of PhCs and PFCs, while the removal of EDCs was not statistically significant. Among the various studied technologies, PAC stands out due to its capability to sufficiently remove most ECs. In particular, removal rates higher than 70% were observed for 9 compounds, 22 were partially removed, while 7 demonstrated low removal rates. Based on our screening experiments, future research should focus on scaling-up PAC in actual conditions, combining PAC with other processes, and conduct a complete economic and environmental assessment of the treatment.     

Insights into the electron transfer mechanisms of permanganate activation by carbon nanotube membrane for enhanced micropollutants degradation

● A CNT filter enabled effective KMnO₄ activation via facilitated electron transfer. ● Ultra-fast degradation of micropollutants were achieved in KMnO₄/CNT system. ● CNT mediated electron transfer process from electron-rich molecules to KMnO₄. ● Electron transfer dominated organic degradation. Numerous reagents have been proposed as electron sacrificers to induce the decomposition of permanganate (KMnO₄) by producing highly reactive Mn species for micropollutants degradation. However, this strategy can lead to low KMnO₄ utilization efficiency due to limitations associated with poor mass transport and high energy consumption. In the present study, we rationally designed a catalytic carbon nanotube (CNT) membrane for KMnO₄ activation toward enhanced degradation of micropollutants. The proposed flow-through system outperformed conventional batch reactor owing to the improved mass transfer via convection. Under optimal conditionals, a > 70% removal (equivalent to an oxidation flux of 2.43 mmol/(h·m²)) of 80 μmol/L sulfamethoxazole (SMX) solution can be achieved at single-pass mode. The experimental analysis and DFT studies verified that CNT could mediate direct electron transfer from organic molecules to KMnO₄, resulting in a high utilization efficiency of KMnO₄. Furthermore, the KMnO₄/CNT system had outstanding reusability and CNT could maintain a long-lasting reactivity, which served as a green strategy for the remediation of micropollutants in a sustainable manner. This study provides new insights into the electron transfer mechanisms and unveils the advantages of effective KMnO₄ utilization in the KMnO₄/CNT system for environmental remediation.     

Identification of pollution sources in rivers using a hydrodynamic diffusion wave model and improved Bayesian-Markov chain Monte Carlo algorithm

● A hydrodynamic-Bayesian inference model was developed for water pollution tracking. ● Model is not stuck in local optimal solutions for high-dimensional problem. ● Model can estimate source parameters accurately with known river water levels. ● Both sudden spill incident and normal sewage inputs into the river can be tracked. ● Model is superior to the traditional approaches based on the test cases. Water quality restoration in rivers requires identification of the locations and discharges of pollution sources, and a reliable mathematical model to accomplish this identification is essential. In this paper, an innovative framework is presented to inversely estimate pollution sources for both accident preparedness and normal management of the allowable pollutant discharge. The proposed model integrates the concepts of the hydrodynamic diffusion wave equation and an improved Bayesian-Markov chain Monte Carlo method (MCMC). The methodological framework is tested using a designed case of a sudden wastewater spill incident (i.e., source location, flow rate, and starting and ending times of the discharge) and a real case of multiple sewage inputs into a river (i.e., locations and daily flows of sewage sources). The proposed modeling based on the improved Bayesian-MCMC method can effectively solve high-dimensional search and optimization problems according to known river water levels at pre-set monitoring sites. It can adequately provide accurate source estimation parameters using only one simulation through exploration of the full parameter space. In comparison, the inverse models based on the popular random walk Metropolis (RWM) algorithm and microbial genetic algorithm (MGA) do not produce reliable estimates for the two scenarios even after multiple simulation runs, and they fall into locally optimal solutions. Since much more water level data are available than water quality data, the proposed approach also provides a cost-effective solution for identifying pollution sources in rivers with the support of high-frequency water level data, especially for rivers receiving significant sewage discharges.     

Revealing the GHG reduction potential of emerging biomass-based CO2 utilization with an iron cycle system

● Greenhouse gas mitigation by biomass-based CO₂ utilization with a Fe cycle system. ● The system including hydrothermal CO₂ reduction with Fe and Fe recovery by biomass. ● The reduction potential quantified by experiments, simulations, and an ex-ante LCA. ● The greatest GHG reduction potential is −34.03 kg CO₂-eq/kg absorbed CO₂. ● Ex-ante LCA supports process optimization to maximize GHG reduction potential. CO₂ utilization becomes a promising solution for reducing anthropogenic greenhouse gas (GHG) emissions. Biomass-based CO₂ utilization (BCU) even has the potential to generate negative emissions, but the corresponding quantitative evaluation is limited. Herein, the biomass-based CO₂ utilization with an iron cycle (BCU-Fe) system, which converts CO₂ into formate by Fe under hydrothermal conditions and recovers Fe with biomass-derived glycerin, was investigated. The GHG reduction potential under various process designs was quantified by a multidisciplinary method, including experiments, simulations, and an ex-ante life-cycle assessment. The results reveal that the BCU-Fe system could bring considerable GHG emission reduction. Significantly, the lowest value is −34.03 kg CO₂-eq/kg absorbed CO₂ (−2.44 kg CO₂-eq/kg circulated Fe) with the optimal yield of formate (66%) and Fe (80%). The proposed ex-ante evaluation approach not only reveals the benefits of mitigating climate change by applying the BCU-Fe system, but also serves as a generic tool to guide the industrialization of emerging carbon-neutral technologies.     

Functional flax fiber with UV-induced switchable wettability for multipurpose oil-water separation

● A PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed. ● The property of flax fiber could be switched from hydrophobicity to hydrophilicity. ● The mechanism of the acquired UV-induced switchable wettability was discussed. ● The developed flax fiber was successfully used for multipurpose oil-water separation. The large number of oily wastewater discharges and oil spills are bringing about severe threats to environment and human health. Corresponding to this challenge, a functional PAA-ZnO-HDTMS flax fiber with UV-induced switchable wettability was developed for efficient oil-water separation in this study. The developed flax fiber was obtained through PAA grafted polymerization and then ZnO-HDTMS nanocomposite immobilization. The as-prepared PAA-ZnO-HDTMS flax fiber was hydrophobic initially and could be switched to hydrophilic through UV irradiation. Its hydrophobicity could be easily recovered through being stored in dark environment for several days. To optimize the performance of the PAA-ZnO-HDTMS flax fiber, the effects of ZnO and HDTMS concentrations on its switchable wettability were investigated. The optimized PAA-ZnO-HDTMS flax fiber had a large water contact angle (~130°) in air and an extremely small oil contact angle (~0°) underwater initially. After UV treatment, the water contact angle was decreased to 30°, while the underwater oil contact angle was increased to more than 150°. Based on this UV-induced switchable wettability, the developed PAA-ZnO-HDTMS flax fiber was applied to remove oil from immiscible oil-water mixtures and oil-in-water emulsion with great reusability for multiple cycles. Thus, the developed flax fiber could be further fabricated into oil barrier or oil sorbent for oil-water separation, which could be an environmentally-friendly alternative in oil spill response and oily wastewater treatment.     

Construction of MOFs-based nanocomposite membranes for emerging organic contaminants abatement in water

● Application of the MOF-composite membranes in adsorption was discussed. ● Recent application of MOFs-membranes for separation was summarized. ● Separation and degradation for emerging organic contaminants were described. Presence of emerging organic contaminants (EOCs) in water is one of the major threats to water safety. In recent decades, an increasing number of studies have investigated new approaches for their effective removal. Among them, metal-organic frameworks (MOFs) have attracted increasing attention since their first development thanks to their tunable metal nodes and versatile, functional linkers. However, whether or not MOFs have a promising future for practical application in emerging contaminants-containing wastewater is debatable. This review summarizes recent studies about the removal of EOCs using MOFs-related material. The synthesis strategies of both MOF particles and composites, including thin-film nanocomposite and mixed matrix membranes, are critically reviewed, as well as various characterization technologies. The application of the MOF-based composite membranes in adsorption, separation (nanofiltration and ultrafiltration), and catalytic degradation are discussed. Overall, literature survey shows that MOFs-based composite could play a crucial role in eliminating EOCs in the future. In particular, modified membranes that realize separation and degradation might be the most promising materials for such application.     

Evaluation of activated sludge properties’ changes in industrial-wastewater pre-treatment: role of residual aluminum hydrolyzed species with different polymerization degree

● Medium poly Al salts dominated the PAC residual salts with a rational dosage. ● Settlement flocculation effect under medium poly Al salts showed a better trend. ● Complex of medium poly Al salts and enzymes promoted cell activity. ● Medium poly Al salts were beneficial to the effluent indexes. With the widespread introduction of pre-coagulation prior to the biological unit in various industrial wastewater treatments, it is noteworthy that long-term accumulation of residual coagulants has certains effect on both micro and macro characteristics of activated sludge (AS). In this study, the morphology distributions of residual aluminum salts (RAS) and their effects on the removal efficiency of AS were investigated under different PAC concentrations. The results showed that the dominance of medium polymeric RAS, formed under an appropriate PAC dose of 20 mg/L enhanced the hydrophobicity, flocculation, and sedimentation performances of AS, as well as the enzymatic activity in cells in the sludge system, improving the main pollutants removal efficiency of the treatment system. Comparatively the species composition with monomer and dimer / high polymer RAS as the overwhelming parts under an over-dosed PAC concentration of 55 mg/L resulted in excessive secretion of EPS with loose flocs structure and conspicuous inhibition of cellular activity, leading to the deterioration of physico-chemical and biological properties of AS. Based on these findings, this study can shed light on the role of the RAS hydrolyzed species distributions, closely relevant to Al dosage, in affecting the comprehensive properties of AS and provide a theoretical reference for coagulants dosage precise control in the pretreatment of industrial wastewater.     

Modelling the thresholds of nitrogen/phosphorus concentration and hydraulic retention time for bloom control in reclaimed water landscape

● A new model for bloom control in open land scape water was constructed. ● It considers the effects of temperature and light on algae growth. ● It describes threshold curve of nitrogen, phosp horus and hydraulic retention time. ● Light and temperature dependent growth para meters of typical algae were obtained. The risks posed by algal blooms caused by nitrogen and phosphorus in reclaimed water used in urban water landscapes need to be carefully controlled. In this study, the combined effects of the nitrogen and phosphorus concentrations and the light intensity and temperature on the specific growth rates of algae were determined using Monod, Steele, and Arrhenius models, then an integrated algal growth model was developed. The algae biomass, nitrogen concentration, and phosphorus concentration mass balance equations were used to establish a new control model describing the nitrogen and phosphorus concentration and hydraulic retention time thresholds for algal blooms. The model parameters were determined by fitting the models to data acquired experimentally. Finally, the control model and numerical simulations for six typical algae and mixed algae under standard conditions were used to determine nitrogen/phosphorus concentration and hydraulic retention time thresholds for landscape water to which reclaimed water is supplied (i.e., for a reclaimed water landscape).     

Preliminary techno-economic analysis of three typical decentralized composting technologies treating rural kitchen waste: a case study in China

● Decentralized composting (DC) is a profitable KW treating technology. ● SAC and BEC were economically attractive in rural area, while HDC was unprofitable. ● KW handling subsidy plays a vital role in making DC profitable. ● SAC and BEC have great potential in promoting rural KW treatment. This study was designed to evaluate whether the decentralized rural kitchen waste (KW) composting technologies used in China can be widely applied. To this end, we completed a techno-economic analysis of three typical types of KW compositing, namely solar-assisted (SAC), bio-enhanced (BEC), and heat-dewatering composting (HDC). These evaluations revealed that all three technologies produce composting products that meet China’s organic fertilizer standard and that both SAC and BEC are economically self-sustaining and generate net profits (18824.94 and 17791.52 US$/a) and positive net present values (32133.11 and 25035.93 US$). Subsequent sensitivity analysis demonstrated that the KW-handling subsidy plays a critical role in making decentralized composting economically attractive. Based on these analyses, we believe that reducing the coverage area of SAC, reducing the operating cost of BEC and HDC, upgrading composting products, and strengthening secondary pollution control would aid in supporting the technological improvement of these processes. Moreover, providing appropriate subsidies and promulgating specific standards and policies for KW fertilizer are key strategies for decentralized rural KW composting management.