The Relationship between Judged Visibility and Judged Air Quality: Results of a Survey

ABSTRACT

Based on a study of the composition of urban solid waste (USW) and of socioeconomic variables in Morelia, Mexico, generation rates were estimated. In addition, the generation of residential solid waste (RSW) and nonresidential solid waste (NRSW) was forecasted by means of a multiple linear regression (MLR) analysis. For residential sources, the independent variables analyzed were monthly wages, persons per dwelling, age, and educational level of the heads of the household. For nonresidential sources, variables analyzed were number of employees, area of facilities, number of working days, and working hours per day. The forecasted values for residential waste were similar to those observed. This approach may be applied to areas in which available data are scarce, and in which there is an urgent need for the planning of adequate management of USW.     

Dioxin mass balance in a municipal waste incinerator

A dioxin mass balance in an Spanish municipal waste incinerator (MWI) is presented. Input and output inventories from two sampling collection episodes including the analysis of PCDD/PCDF in urban solid waste (USW), stack gas emissions, fly ash and slag are reported. In one collection the levels of USW were around 8 pg I-TEQ/g and non-thermal destruction was observed overall. In the other collection the levels of USW were higher (around 64 pg I-TEQ/g) and the dioxin balance revealed a thermal destruction. Analysis of the different waste materials (textile, organic, plastic, wood and paper) was performed separately and the textile samples presented the highest levels.     

Economic evaluation of a landfill system with gas recovery for municipal solid waste management: a case study

Economic activity uses resources, which leads to waste generation. With rapid industrialisation and urbanisation, per capita solid waste generation has increased considerably. Solid waste generation data for last two decades shows an alarming increase. Owing to its improper and untimely collection, the transport and disposal of municipal solid waste poses a severe threat to various components of the environment and also to public health. This paper describes the merits and demerits of various technological aspects of solid waste management. Landfill technology, as it is the most widely employed and is regarded as the most suitable and simple mechanism, especially for tropical countries such as India, is emphasised. All possible costs and benefits and externalities are examined. A cost-benefit analysis of a landfill system with gas recovery (LFSGR) has been carried out for Mumbai city's solid waste, accounting for certain external costs and benefits, and found that it could make a huge difference of savings of about Rs. 6.366 billion (approx. $0.l40 billion) per annum with reference to the existing system of waste disposal.     

Welcome

Abstract

An indicator of solid waste generation potential (SWGP) is proposed as a versatile means to assist the development of integrated solid waste (SW) management plans. The proposed indicator is based on key sodoeconomic variables for the State of Illinois which were found to be highly correlated with variables describing the SW stream of the State. The proposed indicator was derived by applying the principal components analysis (PCA) technique. The technique is used to merge the rank transformed socioeconomic variables into a single variable, the SWGP indicator, while maintaining the regional information of the original variables. An innovative aspect of this indicator approach is the use of the ordinal scale for all these diverse variables. The validity of this approach was assessed and the proposed indicator was found to be directly proportional to a composite variable describing the SW stream for the State of Illinois. The use of Geographic Information Systems (GIS) to depict the spatial distribution of the SWGP will help planners visualize the expected overall refuse generation pattern and to identify critical regions. In addition, the proposed indicator could be used as an instrument to validate the solid waste generation (SWG) quantities reported by counties to state agencies.     

Solid waste forecasting using modified ANFIS modeling

Solid waste prediction is crucial for sustainable solid waste management. Usually, accurate waste generation record is challenge in developing countries which complicates the modelling process. Solid waste generation is related to demographic, economic, and social factors. However, these factors are highly varied due to population and economy growths. The objective of this research is to determine the most influencing demographic and economic factors that affect solid waste generation using systematic approach, and then develop a model to forecast solid waste generation using a modified Adaptive Neural Inference System (MANFIS). The model evaluation was performed using Root Mean Square Error (RMSE), Mean Absolute Error (MAE) and the coefficient of determination (R2). The results show that the best input variables are people age groups 0-14, 15-64, and people above 65 years, and the best model structure is 3 triangular fuzzy membership functions and 27 fuzzy rules. The model has been validated using testing data and the resulted training RMSE, MAE and R2 were 0.2678, 0.045 and 0.99, respectively, while for testing phase RMSE =3.986, MAE = 0.673 and R2 = 0.98.

Implications: To date, a few attempts have been made to predict the annual solid waste generation in developing countries. This paper presents modeling of annual solid waste generation using Modified ANFIS, it is a systematic approach to search for the most influencing factors and then modify the ANFIS structure to simplify the model. The proposed method can be used to forecast the waste generation in such developing countries where accurate reliable data is not always available. Moreover, annual solid waste prediction is essential for sustainable planning.     

The Spanish dioxin inventory part I: Incineration as municipal waste management system

The main objectives of the Spanish dioxin inventory and the incidence of municipal waste incinerators in the PCDD/Fs releases in the period from January 1997-November 1999 are presented. Preliminary data about the stack emission levels, fly ashes and slags as solid residues and the PCDD/Fs input in the USW are also presented to elaborate an initial balance for the incineration sector. A great decrease, from 20 to 1.2 g I-TEQ/y, from incineration gas emissions has been observed since 1996. The preliminary balance in the MWI sector suggests an overall PCDD/Fs destruction. The calculated emission factor, 1.06 microg I-TEQ/Mg, indicates a high quality of the air pollution control systems. The assumption of PCDD/Fs in the USW permits an initial evaluation of other waste management systems.     

Emission inventory for greenhouse gases in the City of Barcelona, 1987–1996

Emissions of greenhouse gases for the City of Barcelona are estimated for the period 1987–1994. The sources considered are: public and private transportation; industrial, commercial and domestic activities; and municipal solid waste disposal. The results show that the main source of CO₂ emissions in Barcelona is private vehicle transportation, which accounts, as an average for the period studied, for 35% of total emissions. The second most important source is the municipal solid waste landfill facility of the city (24% of total emissions). The percentages for the remaining sources under consideration were: 14% electricity, 12% natural gas, 5% incineration, and 3% liquefied petroleum gases. However, the values for CO₂ emissions per inhabitant over the period studied are lower than those for any other industrialized city available for comparison. This is closely related to the high percentage of electricity generation from nuclear power stations and hydro power facilities, and also to the extensive use of natural gas for domestic uses.     

Characteristics and management of domestic waste in a rural area of the Tibetan Plateau

In the rural area of the Tibetan Plateau (RATP), the characteristics of domestic waste, people’s environmental awareness, people’s willingness to pay and their influence factors were firstly studied by questionnaires, field samplings and laboratory tests. The results showed that, in the RATP, the generation of domestic waste was 85 g?d-1 per capita and it was mainly composed of plastics, inert waste, kitchen waste, glass and paper. The waste bulk density, moisture content, ash, combustible and low calorific value were 65 kg?m-3, 19.25%, 44.90%, 35.85% and 10,520 kJ?kg-1 respectively. These characteristics are influenced by income sources and geographical position to some extent. Classified collection should be promoted widely on the household and the village basis. Compost, fermentation, landfill, bioreactor landfill and semi-aerobic landfill have been approved as effective techniques to treat domestic waste, except incineration. The distance of 50–800 m between each collection facility and the disposal fee of around $0.8 per month per household are suggested. For suburbs or large population villages, it’s better to treat domestic waste by the centralized way. But for the remote rural areas, a decentralized way is proposed. Significantly, the educational and economic influence should be considered into an effective domestic waste management program.

Implications:?The current situatio n of the environment in the rural areas of the Tibetan Plateau (RATP) was surveyed. There, the generation of organics and moisture of domestic waste were low but ash, recyclables, and combustibles were high. People’s knowledge of domestic waste was absent but their participation in management was strong. Based on the current situation, compost, fermentation, and landfill were effective but incineration was inappropriate. Also, a localized mini landfill for a cluster of villages and or settlements was the best method there.     

A copula-based chance-constrained waste management planning method: An application to the city of Regina,Saskatchewan, Canada

This study proposes a copula-based chance-constrained waste management planning (CCWMP) method. The method can effectively reflect the interactions between random parameters of the waste management planning systems, and thus can help analyze the influences of their interactions on the entire systems. In particular, a joint distribution function is established using preestimated marginal distributions of random variables and an optimal copula selected from widely used Gaussian, Student’s t, Clayton, Frank, Gumbel, and Ali-Mikhail-Haq copulas. Then a set of joint probabilistic constraints in the chance-constrained programming problems is converted into individual probabilistic constraints using the joint distribution function. Further, this method is applied to residential solid waste management in the city of Regina in Canada for demonstrating its applicability. Nine scenarios based on different joint and marginal probability levels are considered within a multiperiod and multizone context to effectively reflect dynamic, uncertain, and interactive characteristics of the solid waste management systems in the city. The results provide many decision alternatives under these scenarios, including cost-effective and environmentally friendly decision schemes. Moreover, the results indicate that even though the effect of the joint probability levels on the system costs is more significant than that of the marginal probability levels, the effect of marginal probability levels is notable, and there exists a trade-off between the total system cost and the constraint-violation risk. Therefore, the results obtained from the present study would be useful to support the city’s long-term solid waste management planning and formulate local policies and regulation concerning the city’s waste generation and management.Implications: The CCWMP method not only can solve chance-constrained problems with unknown probability distributions of random variables in the right-hand sides of constraints, but also can effectively reflect the interactions between the random parameters and thus help analyze the influences of their interactions on the entire systems. The results obtained through applying this method to the city of Regina in Canada can provide many decision alternatives under different joint probability levels and marginal probability levels, and would be useful to support the city’s long-term solid waste management planning.     

Electricity generation from landfill gas in Turkey

Landfill gas (LFG)-to-energy plants in Turkey were investigated, and the LFG-to-energy plant of a metropolitan municipal landfill was monitored for 3 years. Installed capacities and actual gas engine working hours were determined. An equation was developed to estimate the power capacity for LFG-to-energy plants for a given amount of landfilled waste. Monitoring the actual gas generation rates enabled determination of LFG generation factors for Turkish municipal waste. A significant relationship (R = 0.524, p < 0.01, two-tailed) was found between the amounts of landfilled waste and the ambient temperature, which can be attributed to food consumption and kitchen waste generation behaviors influenced by the ambient temperature. However, no significant correlation was found between the ambient temperature and the generated LFG. A temperature buffering capacity was inferred to exist within the landfill, which enables the anaerobic reactions to continue functioning even during cold seasons. The average LFG and energy generation rates were 45 m³ LFG/ton waste landfilled and 0.08 MWhr/ton waste landfilled, respectively. The mean specific LFG consumption for electricity generation was 529 ± 28 m³/MWhr.

Implications: The paper will be useful for local authorities who need to manage municipal waste by using landfills. The paper will also be useful for investors who want to evaluate the energy production potential of municipal wastes and the factors affecting the energy generation process mostly for economical purposes. Landfills can be regarded as energy sources and their potentials need to be investigated. The paper will also be useful for policymakers dealing with energy issues. The paper contains information on real practical data such as engine working hours, equation to estimate the necessary power for a given amount of landfilled waste, and son on.     

Model of municipal solid waste source separation activity: a case study of Beijing

One major challenge faced by Beijing is dealing with the enormous amount of municipal solid waste (MSW) generated, which contains a high percentage of food waste. Source separation is considered an effective means of reducing waste and enhancing recycling. However, few studies have focused on quantification of the mechanism of source separation activity. Therefore, this study was conducted to establish a mathematical model of source separation activity (MSSA) that correlates the source separation ratio with the following parameters: separation facilities, awareness, separation transportation, participation atmosphere, environmental profit, sense of honor, and economic profit. The MSSA consisted of two equations, one related to the behavior generation stage and one related to the behavior stability stage. The source separation ratios of the residential community, office building, and primary and middle school were calculated using the MSSA. Data for analysis were obtained from a 1-yr investigation and a questionnaire conducted at 128 MSW clusters around Beijing. The results revealed that office buildings had an initial separation ratio of 80% and a stable separation ratio of 65.86%, whereas residential communities and primary and middle schools did not have a stable separation ratio. The MSSA curve took on two shapes. In addition, internal motivations and the separation transportation ratio were found to be key parameters of the MSSA. This model can be utilized for other cities and countries.     

Air pollution from a large steel factory: polycyclic aromatic hydrocarbon emissions from coke-oven batteries

A systematic investigation of solid and gaseous atmospheric emissions from some coke-oven batteries of one of Europe's largest integrated steel factory (Taranto, Italy) has been carried out. In air monitoring samples, polycyclic aromatic hydrocarbons (PAHs) were consistently detected at concentrations largely exceeding threshold limit values. By means of PAHs speciation profile and benzo(a)pyrene (BaP) equivalent dispersion modeling from diffuse sources, the study indicated that serious health risks exist not only in working areas, but also in a densely populated residential district near the factory.     

香港城市固体废物系统管理

本文以大量翔实的数据介绍了香港对城市固体废物的系统管理,即分类、收集、监测分析、处理和预测评价。香港环保署自８０ 年代开始对城市固体废物进行监测并系统管理。在全港设置了３ 个大型策略性填埋场、５ 个垃圾转运站、１ 个垃圾焚烧厂（１９９７ 年５ 月关闭） 和１个化学废物处理中心。目前,香港政府正筹建一个新的、技术先进的焚烧厂。从１９８６ ～１９９７年,这些废物处理设施处理全港废物量为８９６０ ～２４３００ｔ／ｄ,其中城市固体废物比例每年不等,最低为３０ ．７ ％ ,最高为６５ ．５ ％ 。１９９７ 年,这些废物中可循环再利用物接近５０ ％ ,出口部分达１２０ 多万吨,回收资金２０ 多亿港元。根据历年来城市固体废物量与本地生产总值（ＧＤＰ）和人口数量的密切相关性,预测出２０１１ 年城市固体废物人均产率为２ ．５６ｋｇ／ 人·ｄ, 城市固体废物量为１２８１０ ｔ／ｄ。城市固体废物系统管理紧迫而重要,香港的经验是值得我们借鉴的。     

Emission inventory and sources of polycyclic aromatic hydrocarbons in the atmosphere at a suburban area in Taiwan

The application of a chemical mass balance air pollution model to ambient measurements of polycyclic aromatic hydrocarbons (PAHs) is presented. Sixteen air samples were collected at seven sites in a suburban area in Taiwan and analyzed for the concentration of 21 compounds between July 2001 and September 2001. Each ambient sample was evaluated for the PAH contribution from six sources (heavy oil combustion, natural gas combustion, coal combustion, diesel combustion, vehicles and municipal solid waste incinerator). Average predictions agree well with the emission inventory. By this method, the average contributions are 49%, 14%, 22%, 12%, and 2% from vehicles, heavy oil combustion, natural gas combustion, coal combustion and diesel combustion at these seven receptors. By far, vehicles are the major PAH emission sources and municipal solid waste incinerator is a minor contributor. The calculated result of particulate PAHs is compared with that of total (gaseous and particulate) PAHs. The estimate based on total PAHs is better than the estimate based on particulate PAHs only. Contributions of eight low reactive PAHs for the same emission sources and receptors were calculated. Atmospheric reactivity seems not a problem for source apportionment in this study.     

Municipal solid waste characteristics and management in China

The purpose of this investigation is to evaluate the current status and identify the problems of municipal solid waste (MSW) management in China in order to determine appropriate remedial strategies. This is the first of two papers, discussing primarily the general characteristics of MSW and its management in China. The second paper focuses on specific remedial strategies. MSW generation in China has increased rapidly in the past 20 years from 31.3 million tons in 1980 to 113.0 million tons in 1998. The annual rate of increase is 3-10%. The average generation per capita is 1.0 kg/day (0.38 t/year). Nearly one-half of the waste generated is dumped in the suburbs, where the accumulated quantity has reached 6 billion tons, which has caused heavy environmental pollution. This paper provides information on MSW management in China, such as MSW generation and its physical, chemical, and biological properties. Low calorific value and high moisture content characterize China's municipal waste. Other issues related to MSW management in China are also discussed, including the factors that influence MSW generation quantity and     

A comparative study on per capita waste generation according to a waste collecting system in Korea

As cities are becoming increasingly aware of problems related to conventional mobile collection systems, automated pipeline-based vacuum collection (AVAC) systems have been introduced in some densely populated urban areas. The reasons are that in addition to cost savings, AVAC systems can be efficient, hygienic, and environmentally friendly. Despite difficulties in making direct comparisons of municipal waste between a conventional mobile collection system and an AVAC system, it is meaningful to measure the quantities in each of these collection methods either in total or on a per capita generation of waste (PCGW, g/(day*capita)) basis. Thus, the aim of this study was to assess the difference in per capita generation of household waste according to the different waste collection methods in Korea. Observations on household waste show that there were considerable differences according to waste collection methods. The value of per capita generation of food waste (PCGF) indicates that a person in a city using AVAC produces 60 % of PCGF (109.58 g/(day*capita)), on average, compared with that of a truck system (173.10 g/(day*capita)) as well as 23 %p less moisture component than that with trucks. The value of per capita generation of general waste (PCGG) in a city with an AVAC system showed 147.73 g/(day*capita), which is 20 % less than that with trucks delivered (185 g/(day*capita)). However, general waste sampled from AVAC showed a 35 %p increased moisture content versus truck delivery.     

Levels of dioxins and furans in urban surface soil in Trondheim, Norway

A study was conducted on polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) in surface soil in order to determine the concentration levels and possibly distinguishing between known and potential sources. The concentration levels are low (0.16-14 ng I-TEQ kg(-1)). The results show a clear pattern where the highest concentration levels were found in the oldest parts of the city. A number of sources were recognised in the soil samples through congener profiles, not all of them active, although similar congener profiles make it extremely difficult to distinguish between different sources. Estimations show that the municipal solid waste incinerator (MSWI) and domestic wood burning are the largest PCDD/F pollution sources within the area.     

Generation and management of waste electric vehicle batteries in China

With the increasing adoption of EVs (electric vehicles), a large number of waste EV LIBs (electric vehicle lithium-ion batteries) were generated in China. Statistics showed generation of waste EV LIBs in 2016 reached approximately 10,000 tons, and the amount of them would be growing rapidly in the future. In view of the deleterious effects of waste EV LIBs on the environment and the valuable energy storage capacity or materials that can be reused in them, China has started emphasizing the management, reuse, and recycling of them. This paper presented the generation trend of waste EV LIBs and focused on interrelated management development and experience in China. Based on the situation of waste EV LIBs management in China, existing problems were analyzed and summarized. Some recommendations were made for decision-making organs to use as valuable references to improve the management of waste EV LIBs and promote the sustainable development of EVs.     

Sulfate Emissions from Catalyst-Equipped Automobiles on the Highway

Abstract

A systematic investigation of solid and gaseous atmospheric emissions from some coke-oven batteries of one of Europe’s largest integrated steel factory (Taranto, Italy) has been carried out. In air monitoring samples, polycyclic aromatic hydrocarbons (PAHs) were consistently detected at concentrations largely exceeding threshold limit values. By means of PAHs speciation profile and benzo (a)pyrene (BaP) equivalent dispersion modeling from diffuse sources, the study indicated that serious health risks exist not only in working areas, but also in a densely populated residential district near the factory.     

1988 APCA Government Agencies Directory

The biowaste fractions in municipal solid waste (MSW) are the main odor sources in landfill and cause widespread complaints from residents. The ammonia (NH₃) and hydrogen sulfide (H₂S) generation processes were simulated and compared between four typical biowaste fractions individually and combined in the mixed MSW. Food waste was found to be the main contributor to odor emission in mixed MSW, with H₂S generation potential of 48.4 μg kg^?1 and NH₃ generation potential of 4742 μg kg^?1. Fruit waste was another source for NH₃ generation, with 3933 μg kg^?1 NH₃ generation potential. Meanwhile, nitrogen (N) was released in a faster way than sulfur (S) in waste, since 31% and 46% of total NH₃ and H₂S were generated in the first 90 days after disposal, with 1811 and 72 μg kg^?1, and more emphasis should be placed in this initial period.

Implications:?Monitoring of odor generation from biowastes in MSW on a laboratory scale showed that food waste is the main source for NH₃ and H₂S generation, whereas waste fruit is another main contributor for NH₃ released. Generally, N was released in a faster way than S from mixed-waste landfilling.