Assessment of factors affecting household solid waste generation and its composition in Gulberg Town,Lahore, Pakistan

This paper analyzes and compares the findings of the characterization study of collected solid waste from households of three different socioeconomic groups in Lahore, Pakistan, over the four seasons, i.e. Spring (March–April, 2008), Summer (May–June, 2008), Monsoon (August–September, 2008) and Winter (December 2008 and January 2009). The generation rate of waste was 0.96 kg/cap/day for high-income, 0.73 kg/cap/day for middle and 0.67 kg/cap/day for low-income group. The average of total household solid waste (HSW) generation is 0.79 kg/cap/day (including 0.75 kg/cap/day for spring, 0.77 kg/cap/day for summer, 0.86 kg/cap/day for monsoon and 0.76 kg/cap/day. The breakdown for the major physical components of the waste shows that organic waste accounts for the largest proportion (67.46 %). The relations between waste generation rates by physical category and subcategory, in addition to factors such as socioeconomic groups (population density levels, household income and household size), seasonal variation, and daily variation (difference of HSW generation among days of a week) were also analyzed. Statistical analysis shows that there was no significant difference in overall waste generation among days of a week. A significant difference between the seasons for food waste, cardboard, PET, HDPE, other hazardous waste, battery cells, and dust and stone (p < 0.001) was found. The generation rates were found to be higher when compared to other developing countries.     

Residential solid waste generation and recycling in the U.S.A. and Japan

The generation rates of each residential solid waste component was determined for test areas in the U.S.A. and Japan. To keep the results consistent; single family dwelling areas in Madison (U.S.A.) and Sapporo (Japan), which have similar characteristics, were selected as test areas; the same survey methods were employed in both cities; all waste material from households, including recycled material, was estimated. The average person in Madison was found to produce twice the amount of paper waste, half the amount of food waste but approximately the same quantity of total residential waste (other than yard waste) as in Sapporo.     

资源枯竭型城市工业固体废弃物回收利用体系建设——以白银市为例

通过对资源枯竭型城市白银市在工业固体废弃物回收利用方面的现状分析发现存在诸多问题,如对固体废弃物回收利用工作重视不够、激励和引导固体废弃物回收利用产业发展的政策不健全、技术体系不完备等。基于循环经济"减量化、再利用、再循环"三原则理念,提出建设资源枯竭型城市工业固体废弃物回收利用体系的一系列措施:提高工业固体废弃物的循环利用效率;完善固体废弃物分类回收系统;开发引进固体废弃物回收利用的高新技术;完善垃圾处理收费及管理制度等。     

Status and challenges of hospital solid waste management: case studies from Thailand, Pakistan, and Mongolia

Healthcare waste management is a serious public health concern. In developing countries, compared to developed nations, the management of infectious wastes has not received sufficient attention. Recently, worldwide awareness has grown of the need to impose stricter controls on the handling and disposal of wastes generated by healthcare facilities. This exploratory study attempted in seven selected hospitals to explain the situation of healthcare waste management, with a focus on handling practices, occupational safety, and the implementation status of waste management policy, together with other pertinent policy issues. It was noted that the current system of healthcare waste management was underdeveloped and was in dire need of immediate attention and improvement, especially in Mongolia and Pakistan; the medical waste management practices were better in the hospitals studied in Thailand. This study underscores the importance for improvement of medical waste management of a national regulatory framework, a sound internal management system, and programs to train and ensure the safety of related personnel, as well as programs to estimate quantities of waste generated and to evaluate appropriate techniques of disposal. Once a healthcare waste management plan has been prepared, a regular program of inspection and review can be undertaken within the healthcare institution. A good inspection program can also expose problems and new issues in managing healthcare wastes.     

Economical and environmental implications of solid waste compost applications to agricultural fields in Punjab,Pakistan

Application of municipal solid waste compost (MSWC) to agricultural soils is becoming an increasingly important global practice to enhance and sustain soil organic matter (SOM) and fertility levels. Potential risks associated with heavy metals and phosphorus accumulations in surface soils may be minimized with integrated nutrient management strategies that utilize MSWC together with mineral fertilizers. To explore the economic feasibility of MSWC applications, nutrient management plans were developed for rice–wheat and cotton–wheat cropping systems within the Punjab region of Pakistan. Three-year field trials were conducted to measure yields and to determine the economic benefits using three management strategies and two nutrient doses. Management strategies included the application of mineral fertilizers as the sole nutrient source and application of mineral fertilizers in combination with MSWC with and without pesticide/herbicide treatments. Fertilizer doses were either based on standard N, P and K recommendations or on measured site-specific soil plant available phosphorus (PAP) levels. It was found that combining MSWC and mineral fertilizer applications based on site-specific PAP levels with the use of pesticides and herbicides is an economically and environmentally viable management strategy. Results show that incorporation of MSWC improved soil physical properties such as bulk density and penetration resistance. The PAP levels in the surface layer increased by the end of the trials relative to the initial status. No potential risks of heavy metal (Zn, Cd, Cr, Pb and Ni) accumulation were observed. Treatments comprised of MSWC and mineral fertilizer adjusted to site-specific PAP levels and with common pest management showed highest cumulative yields. A basic economic analysis revealed a significantly higher cumulative net profit and value-to-cost ratio (VCR) for all site-specific doses.     

Estimating the quantity of solid waste generation in Oyo, Nigeria.

The study established waste multipliers that could be used in conjunction with the population figure of a city to estimate the quantity of solid waste generation in the developing world. Oyo, a traditional city in Nigeria was the focus of the study. Two sets of data were collected. The first was the information on the socio-economic attributes of residents obtained from 648 households through questionnaires administered using a systematic random sampling technique. The second was the measurement of waste generated in 25% of the households for a week in each of the 12 months of the year. The study established that 23.3% of the residents surveyed have educational qualifications beyond secondary school, with 51.2% engaged in occupations requiring very little or no formal education and 50.9% were in the low-income group. The daily per capita solid waste generation was 0.129 kg. The highest (9.8%) and lowest (6.5%) of the annual quantities of waste were produced in October and February, respectively. Similarly, 20.2% of the weekly generation was produced on Saturday and the 10.2% produced on Thursday was the lowest. Animal dung, which accounted for 18.0%, constituted the highest component of the total solid waste generated. The study further established that the organic component of the waste generation was 75.4%. The results of the regression analysis R2 significant at 0.001 showed that income, household size, social status, occupation, education and season of the year explained 88.8% of waste generation in Oyo. It was established that 50.90 tonnes of solid waste was generated per day in the city in 2005, and the daily generation in the year 2008 is estimated to be 55.20 tonnes. The study concluded that with an average annual population growth of 13 000 people for the town, an additional 1.3 acres of land will need to be legally acquired annually, implying that 10.92-19.68 hectares ill be required as dump site(s) over the next 20-30 years.     

Seasonal quantification and characterization of solid waste generation in tertiary institution: a case study

Journal of Material Cycles and Waste Management - This research investigates the types and quantity of different components of solid waste produced at Obafemi Awolowo University, Ile-Ife (OAU)...     

Municipal solid waste generation in municipalities: quantifying impacts of household structure, commercial waste and domestic fuel

Waste management planning requires reliable data concerning waste generation, influencing factors on waste generation and forecasts of waste quantities based on facts. This paper aims at identifying and quantifying differences between different municipalities' municipal solid waste (MSW) collection quantities based on data from waste management and on socio-economic indicators. A large set of 116 indicators from 542 municipalities in the Province of Styria was investigated. The resulting regression model included municipal tax revenue per capita, household size and the percentage of buildings with solid fuel heating systems. The model explains 74.3% of the MSW variation and the model assumptions are met. Other factors such as tourism, home composting or age distribution of the population did not significantly improve the model. According to the model, 21% of MSW collected in Styria was commercial waste and 18% of the generated MSW was burned in domestic heating systems. While the percentage of commercial waste is consistent with literature data, practically no literature data are available for the quantity of MSW burned, which seems to be overestimated by the model. The resulting regression model was used as basis for a waste prognosis model (Beigl and Lebersorger, in preparation).     

Methodology to design a municipal solid waste generation and composition map: A case study

The municipal solid waste (MSW) management is an important task that local governments as well as private companies must take into account to protect human health, the environment and to preserve natural resources. To design an adequate MSW management plan the first step consist in defining the waste generation and composition patterns of the town. As these patterns depend on several socio-economic factors it is advisable to organize them previously. Moreover, the waste generation and composition patterns may vary around the town and over the time. Generally, the data are not homogeneous around the city as the number of inhabitants is not constant nor it is the economic activity. Therefore, if all the information is showed in thematic maps, the final waste management decisions can be made more efficiently. The main aim of this paper is to present a structured methodology that allows local authorities or private companies who deal with MSW to design its own MSW management plan depending on the available data. According to these data, this paper proposes two ways of action: a direct way when detailed data are available and an indirect way when there is a lack of data and it is necessary to take into account bibliographic data. In any case, the amount of information needed is considerable. This paper combines the planning methodology with the Geographic Information Systems to present the final results in thematic maps that make easier to interpret them. The proposed methodology is a previous useful tool to organize the MSW collection routes including the selective collection. To verify the methodology it has been successfully applied to a Spanish town.     

Path analysis of factors influencing household solid waste generation: a case study of Xiamen Island,China

Comprehensive study of the factors influencing household solid waste (HSW) generation is crucial and fundamental for exploring the generation mechanism and forecasting future dynamics of HSW. A case study of Xiamen Island, China was employed to reveal the direct and indirect effects of demographic/socioeconomic factors on solid waste generation at the urban household scale. Based on a face-to-face questionnaire and two-stage survey of solid waste generation, a path analysis model was built. Results showed that the proposed path model exhibited good fit indices. Family size and dinning-at-home rate (DR), whose coefficients were ?0.40 and 0.43, respectively, were the two major factors influencing HSW directly. Moreover, family size, education level, employment rate and age structure played different degrees of indirect effects on HSW generation through respective paths, which should not be ignored. In terms of total effects, coefficients of family size, DR and employment rate were ?0.46, 0.43 and ?0.37, respectively, which were three most dominant factors influencing HSW generation. As for waste composition, organic waste was the most representative of HSW dynamics, and was the most sensitive to impact by the factors studied. Quantitative results of this study have important policy implications for sustainable municipal solid waste management.     

Impact of food waste disposers on the generation rate and characteristics of municipal solid waste

Field surveys were carried out to ascertain the reduction in the generation rate of municipal solid waste as a result of the use of food waste disposers (FWDs). The generation rate and characteristics of garbage and of the food waste ground by FWDs in households were investigated, and the effect of FWDs was discussed. In a medium-sized village, the amount of garbage collected per collection decreased from 251.2 kg to 114.7 kg as a result of FWD use. The unit loading of ground food waste was estimated to be 111 g/cap·day. In a small village, the amount of garbage collected weekly decreased from 175 kg to 112 kg. The average unit loading of ground food waste was measured and found to be 126 g/cap·day. The reduction rate of garbage varied from 25% to 39% monthly and the average reduction rate was 31% throughout the surveying period. Dramatic variations in the characteristics of the collected garbage were recognized: the ratio of food waste on a dry basis declined by more than half, the moisture content decreased to half or less, the combustible matter content increased approximately 1.7 times or more, and the lower heating value increased approximately 2.0 times or more compared to the case without FWD use.     

The impact of municipal solid waste treatment methods on greenhouse gas emissions in Lahore, Pakistan

The contribution of existing municipal solid waste management to emission of greenhouse gases and the alternative scenarios to reduce emissions were analyzed for Data Ganj Bukhsh Town (DGBT) in Lahore, Pakistan using the life cycle assessment methodology. DGBT has a population of 1,624,169 people living in 232,024 dwellings. Total waste generated is 500,000 tons per year with an average per capita rate of 0.84kg per day. Alternative scenarios were developed and evaluated according to the environmental, economic, and social atmosphere of the study area. Solid waste management options considered include the collection and transportation of waste, collection of recyclables with single and mixed material bank container systems (SMBCS, MMBCS), material recovery facilities (MRF), composting, biogasification and landfilling. A life cycle inventory (LCI) of the six scenarios along with the baseline scenario was completed; this helped to quantify the CO2 equivalents, emitted and avoided, for energy consumption, production, fuel consumption, and methane (CH4) emissions. LCI results showed that the contribution of the baseline scenario to the global warming potential as CO2 equivalents was a maximum of 838,116 tons. The sixth scenario had a maximum reduction of GHG emissions in terms of CO2 equivalents of -33,773 tons, but the most workable scenario for the current situation in the study area is scenario 5. It saves 25% in CO2 equivalents compared to the baseline scenario.     

Household waste generation,composition and determining factors in rapidly urbanizing developing cities: case study of Santa Cruz de la Sierra,Bolivia

Journal of Material Cycles and Waste Management - Detailed information about waste generation rates, composition, and their influencing factors, is essential for sustainable municipal solid waste...     

Assessment of solid waste generation and greenhouse gas emission potential in Yangon city,Myanmar

Due to booming economy, growing population and rapid urbanization, solid waste generation in the cities of developing countries has significantly increased. Yangon is the largest and most densely populated city, with over five million residents in Myanmar. Open dumping is the major waste disposal method and recycling sector remains at an early development stage. With increasing waste generation, current waste management activities in Yangon have significant environmental impacts. Therefore, the study developed two linear models to predict annual solid waste generation, regarding per capita waste generation, population growth scenarios, literacy rates and gross domestic products. The Intergovernmental Panel on Climate Change and Institute for Global Environmental Strategies calculation methods were used for greenhouse gas (GHG) emission prediction from recycling, waste transportation and final disposal sites (FDSs). As a result, the total annual waste generation and GHG emission in 2015 may double over the next decade. Two major FDSs, Htawe Chaung and Hteinpin, may contribute waste disposal of 272–797 kilotons per year and emit 177–518 Gg of CO₂-eq per year by 2025. The assessment of annual solid waste generation and GHG emission potential may offer advantages in assisting development of waste management plans in Yangon.     

Assessment of municipal solid waste generation and recyclable materials potential in Kuala Lumpur,Malaysia

This paper presents a forecasting study of municipal solid waste generation (MSWG) rate and potential of its recyclable components in Kuala Lumpur (KL), the capital city of Malaysia. The generation rates and composition of solid wastes of various classes such as street cleansing, landscape and garden, industrial and constructional, institutional, residential and commercial are analyzed. The past and present trends are studied and extrapolated for the coming years using Microsoft office 2003 Excel spreadsheet assuming a linear behavior. The study shows that increased solid waste generation of KL is alarming. For instance, the amount of daily residential SWG is found to be about 1.62 kg/capita; with the national average at 0.8–0.9 kg/capita and is expected to be increasing linearly, reaching to 2.23 kg/capita by 2024. This figure seems reasonable for an urban developing area like KL city. It is also found that, food (organic) waste is the major recyclable component followed by mix paper and mix plastics. Along with estimated population growth and their business activities, it has been observed that the city is still lacking in terms of efficient waste treatment technology, sufficient fund, public awareness, maintaining the established norms of industrial waste treatment etc. Hence it is recommended that the concerned authority (DBKL) shall view this issue seriously.     

Comparison of municipal solid waste management systems in Canada and Ghana: A case study of the cities of London, Ontario, and Kumasi, Ghana

Integrated waste management has been accepted as a sustainable approach to solid waste management in any region. It can be applied in both developed and developing countries. The difference is the approach taken to develop the integrated waste management system. This review looks at the integrated waste management system operating in the city of London, Ontario-Canada and how lessons can be drawn from the system’s development and operation that will help implement a sustainable waste management system in the city of Kumasi, Ghana. The waste management system in London is designed such that all waste generated in the city is handled and disposed of appropriately. The responsibility of each sector handling waste is clearly defined and monitored. All major services are provided and delivered by a combination of public and private sector forces.The sustainability of the waste management in the city of London is attributed to the continuous improvement strategy framework adopted by the city based on the principles of integrated waste management. It is perceived that adopting a strategic framework based on the principles of integrated waste management with a strong political and social will, can transform the current waste management in Kumasi and other cities in developing countries in the bid for finding lasting solutions to the problems that have plagued the waste management system in these cities.     

GIS-based modelling for the estimation of municipal solid waste generation and collection

In the present paper, an innovative model for the estimation of municipal solid waste generation and collection is proposed. This model is part of an extended solid waste management system and uses a spatial Geodatabase, integrated in a GIS environment. It takes into consideration several parameters of waste generation, such as population density, commercial activities, road characteristics and their influence on the location and allocation of waste bins. Ground-based analysis was applied for the estimation of the inter-relations between the aforementioned factors and the variations in waste generation between residential and commercial areas. Therefore, the proposed model follows a unified categorization approach for residential and commercial activities and focuses on the dominant factors that determine waste generation in the area under study. The most important result of the research work presented in the current paper is an accurate estimation of the optimal number of waste bins and their allocation. A new methodology and an appropriate algorithm have been developed for this purpose in order to facilitate routing and waste collection. By using these results, municipalities aware of social, economical and environmental factors, related to waste management, can achieve optimal usage of their resources and offer the best possible services to their citizens.     

Leachate generation and biogas energy recovery in the Jebel Chakir municipal solid waste landfill,Tunisia

A survey was conducted between 2006 and 2008 in order to identify municipal solid waste (MSW) composition and its influence on leachate generation and to assess the amount of biogas yield from the Jebel Chakir landfill in Tunis City. The organic fraction was the predominant compound in the MSW, followed by paper, fine, plastic, leather, rubber, metal, textile, glass and ceramic. The average MSW moisture content varies from 60 % in the wet season to 80 % in the dry one. The recognised MSW composition is well representative if compared to that of cities in developing countries. A large leachate quantity is produced in the landfill of Jebel Chakir, despite the negative water balance of the site. Based on the annual MSW landfilled quantities and using the LandGEM model, the expected peak landfill gas (LFG) production is estimated to occur 1 year after the landfill closure with a rate of 3.53 × 10⁷ m³/year. The analysis of the potential conversion of LFG to electric energy shows it at a total LFG-to-electricity energy of around 257 GWh with a heating value of 4,475 kcal/m³ based on an LFG collection efficiency of 33 % and energy efficiency of 33 % giving an economic feasibility for a 10 MW power plant.