Biodegradation in laboratory activated sludge plants and aquatic toxicity of herbicides

The biodegradation and the aquatic toxicity of four herbicides (isoproturon, terbuthylazine, mecoprop, metamitron) were investigated. Laboratory activated sludge plants were used for biodegradation experiments. The biodegradation of mecoprop reached nearly 100%, the other herbicides were not eliminated by biodegradation. The acute Daphnia magna 24-h assay, the algal 72-h inhibition test, and the recently developed lemna growth inhibition 7-d test were applied to evaluate the biological effects of herbicides as original substances. EC 50 and EC 10 values were determined. Algal and lemna test show that isoproturon and terbuthylazine are both much more toxic than mecoprop and metamitron. Daphnids are generally less sensitive against herbicides than plants. Biodegradation and toxicity test were coupled for mecoprop to assess biological long-term effects of possible biodegradation products of this herbicide. The effluents of the laboratory activated sludge units were used in toxicity tests (Daphnia magna 21-d reproduction test, lemna growth inhibition 7-d test). No inhibiting effect on the tested organisms was observed.     

Aerobic biodegradation of organotin compounds in activated sludge batch reactors

The biodegradation behavior of four organotin (OT) compounds, namely tributyltin (TBT), dibutyltin (DBT), monobutyltin (MBT) and triphenyltin (TPhT), was studied in lab-scale activated sludge batch reactors. The activated sludge was spiked with the OT compounds at a level of 100 microg l(-1) as Sn. Determination of the OT compounds by GC-FPD after ethylation in the dissolved and particulate phase revealed that 24 h after the start of the experiments, almost the total of OT compounds has been removed from the dissolved phase and is associated with the suspended solids. Calculation of mass balance in batch reactors showed that OT compounds biodegradation was performed via a sequential dealkylation process. Removals due to biodegradation were differentiated according to the parent compound. In experiments with non-acclimatized biomass, a percentage of 27.1, 8.3, 73.8 and 51.3 was still present as TBT, DBT, MBT and TPhT, respectively, at the end of the experiment (18th day). Half-lives (t1/2) of 10.2 and 5.1 days were calculated for TBT and DBT, respectively, whereas apparent t1/2 values could not be determined for MBT and TPhT (t1/2>18 days). The capacity of activated sludge to biodegrade OT compounds in the absence of supplemental substrate indicated that these compounds can be metabolized as single sources of carbon and energy in activated sludge systems. Excluding TBT, the presence of low concentrations of supplemental substrate did not affect the biodegradation potential of activated sludge. The acclimatization of biomass on OT compounds enhanced significantly biodegradation, resulting in significant decreases of half-lives of OT compounds. As a result in the presence of acclimatized biomass, half-lives of 1.4, 3.6, 9.8 and 5.0 days were calculated for TBT, DBT, MBT and TPhT, respectively.     

Inocula from activated sludge for ready biodegradability testing: homogenization by preconditioning

The use of activated sludge as inoculum source in ready biodegradability tests (RBT) suffers from several drawbacks related to the heterogeneity of these communities. In this work, the ability of a 7-day aeration period in a mineral medium to homogenize the characteristics of various activated sludges, as suggested by some RBT, was studied. The biodegradation potential of three activated sludge supernatants obtained from different wastewater treatment plants was assessed in terms of cultivable cell density, dehydrogenasic activity and a profile of hydrolytic enzymes. After the preconditioning, the homogenization of these characteristics in the supernatants was observed, as well as a decrease. When preconditioned inocula were used in acetate RBT, the biodegradation kinetics were homogenized. However, some preconditioned supernatants lost their ability to degrade an easily-assimilable xenobiotic compound (aniline) during the observation period, showing the effect of inoculum preconditioning on the behavior of complex bacterial communities, specialist populations (e.g. aniline degraders) being more sensitive than generalist populations (e.g. acetate degraders). These results show that preconditioning cannot be an optional inoculum pretreatment in RBT, and emphasize the importance of further studies focusing on inoculum homogenization.     

Aerobic inhibition assessment for anaerobic treatment effluent of antibiotic production wastewater

Biological treatment of antibiotic production effluents is an economical approach; however, there are still difficulties to overcome because of the recalcitrant characteristics of these compounds to biodegradation. This study aims to reveal that anaerobic treatment technology can be an option as pretreatment before the activated sludge system treatment to treat antibiotic production effluents. The ISO 8192 method was chosen to test the inhibitory effect of raw and treated antibiotic production effluents in this work. Inhibition tests, which were applied according to ISO 8192, highlighted that the anaerobic treatment effluent is less inhibitory than antibiotic production effluent for activated sludge system. Early EC₅₀ concentrations (30-min values) of raw and treated wastewaters were lower than 180-min values. Also, triple effects (sulfamethoxazole–erythromycin–tetracycline) of antibiotics are more toxic than dual effects (sulfamethoxazole–tetracycline). In light of the experimental results obtained and their evaluation, it can be concluded that anaerobic digestion can be applied as a biological pretreatment method for pharmaceutical industry wastewater including antibiotic mixtures prior to aerobic treatment.     

Anaerobic inhibition and biodegradation of antibiotics in ISO test schemes

Municipal sewage is the main exposure route for antibiotics that are used in human medical care. Antibiotics that adsorb to the primary sludge and/or sur-plus activated sludge will enter the anaerobic digesters of municipal sewage treatment plants. Here anaerobic biodegradation or inhibition of anaerobic bacteria resulting in a disturbance of the process might occur. ISO standards 13641 (2003) and 11734 (1999) were used for assessing the anaerobic inhibition of 16 and the anaerobic biodegradability of 9 antibiotics respectively. Digestion sludge from a municipal sewage treatment plant (1g/l d.s.) was used as inoculum in both tests. In ISO 13641 (2003) most antibiotics showed only moderate inhibition effects after a 7 day incubation period, with EC50 values between 24 mg/l and more than 1000 mg/l (equal to mg/g d.s.). In contrast, metronidazol was decisively toxic to anaerobic bacteria with an EC50 of 0.7 mg/l. In the anaerobic degradation tests according to ISO standard 11734 (1995), only benzylpenicillin showed certain ultimate biodegradation after 60 days and most antibiotics inhibited the digesting sludge in the respective parallel tested inhibition controls. Thus the inhibition of anaerobic bacteria by antibiotics observed in the degradation tests was higher than expected from the results of the inhibition tests. The possible explanations are that distinct substrates are used (yeast extract versus sodium benzoate), that the digestion sludge loses activity during the washing steps performed for the degradation tests and that the exposure time in the degradation tests was 8 times longer than in the inhibition test.     

Biodegradability assessment of several priority hazardous substances: choice, application and relevance regarding toxicity and bacterial activity

Nineteen compounds listed in the category of priority substances (PS) were selected for a biodegradation study using standardized tests. The compounds consist of pesticides, chlorinated solvents and volatile organic compounds (VOCs). In this paper, the choice of the most suitable method is discussed in relation to the physico-chemical properties of each substance. Zahn-Wellens, manometric respirometry and closed-bottle tests are alternatively used. Experimental results are presented and interpreted. Toxicity (Microtox) and bacterial viability (Bac-light) are also used as tools to investigate the influence of each substance on the microbial population (activated sludge). In addition, experimental values are compared with predictive data calculated according to quantitative structure activity relationships (QSARs) models. Biodeg Models were permitted to correctly estimate 17 substances; Survey Models and screening tests also revealed the same behavior for 16 target compounds.     

Determination of detoxification to Daphnia magna of four pharmaceuticals and seven surfactants by activated sludge

Pharmaceuticals are bioactive compounds generally resistant to biodegradation, which can make them problematic when they are released into nature. The use pattern for pharmaceuticals means that they are discharged into water via sewage treatment plants. Also surfactants are discharged through sewage treatment plants, primarily due to their use in detergents and shampoos and other cleaners. In this study the acute toxicity to Daphnia magna of four pharmaceuticals (ciprofloxacin, ibuprofen, paracetamol and zinc pyrithione) and seven surfactants (C8 alkyl glucoside, C6 alkyl glucoside, sodium caprylimidiopropionate, tallow-trimethyl-ammonium chloride, potassium decylphosphate, propylheptanol ethoxylate and alkylmonoethanolamide ethoxylate) was determined. Abiotic (without activated sludge bacteria) and biotic (with activated sludge bacteria) detoxification was also determined. The 24-h EC50s ranged from 2 μg L(-1) for the most toxic substance (zinc pyrithione) to 2 g L(-1) for the least toxic compound (C6 alkyl glucoside). Detoxification rates determined as the ratio between initial EC50 and EC50 after 1 week in water with activated sludge bacteria ranged from 0.4 (paracetamol) to 13 (zinc pyrithione). For most of these chemicals detoxification rate decreased after 1 week, but for one (alkylmonoethanolamide ethoxylate) it increased from about 2 to 30 times after 2 weeks. Many of these chemicals were "detoxified" also abiotically at about the same rate as biotically. Further studies are needed to determine the degradation products that were precipitated (aggregated) for some of the tested chemicals. Altogether, this study has shown that there are large differences in toxicity among chemicals entering sewage treatment plants, but also that the detoxification of them can differ. Therefore, the detoxification should receive more attention in the hazard and risk assessment of chemicals entering sewage treatment plants.     

Xenobiotic benzotriazoles—biodegradation under meso- and oligotrophic conditions as well as denitrifying,sulfate-reducing,and anaerobic conditions

The intensive use of benzotriazoles as corrosion inhibitors for various applications and their application in dishwasher detergents result in an almost omnipresence of benzotriazole (BTri), 4-methyl- and 5-methyl-benzotriazole (4-TTri and 5-TTri, respectively) in aquatic systems. This study aims on the evaluation of the biodegradation potential of activated sludge communities (ASCs) toward the three benzotriazoles regarding aerobic, anoxic, and anaerobic conditions and different nutrients. ASCs were taken from three wastewater treatment plants with different technologies, namely, a membrane bioreactor (MBR-MH), a conventional activated sludge plant CAS-E (intermittent nitrification/denitrification), and CAS-M (two-stage activated sludge treatment) and used for inoculation of biodegradation setups. All ASCs eliminated up to 30 mg L^?1 5-TTri and BTri under aerobic conditions within 2–7 and 21–49 days, respectively, but not under anoxic or anaerobic conditions. 4-TTri was refractory at all conditions tested. Significant differences were observed for BTri biodegradation with non-acclimated ASCs from MBR-MH with 21 days, CAS-E with 41 days, and CAS-M with 49 days. Acclimated ASCs removed BTri within 7 days. Furthermore, different carbon and nitrogen concentrations revealed that nitrogen was implicitly required for biodegradation while carbon showed no such effect. The fastest biodegradation occurred for 5-TTri with no need for acclimatization, followed by BTri. BTri showed sludge-specific biodegradation patterns, but, after sludge acclimation, was removed with the same pattern, regardless of the sludge used. Under anaerobic conditions in the presence of different electron acceptors, none of the three compounds showed biological removal. Thus, presumably, aerobic biodegradation is the major removal mechanism in aquatic systems.     

Evaluation of manometric respiration tests to assess the effects of veterinary antibiotics in soil

Extensive use of antimicrobials in veterinary medicine results in environmental exposure. Of major concern are microbial effects; including effects on nutrient soil cycles and antibiotic resistance. There is a need to assess the effects of these compounds in the environment. The application of standardized guidelines is relevant in studying many compounds. However there is a lack of special test methods designed for antibiotics. We validate manometric test flasks using glucose and a recalcitrant herbicide. The suitability of these tests for studying antibacterial agents is then investigated using two target functions (aerobic biodegradation and carbon transformation). Compound stability is quantified using HPLC techniques. Effects on total soil respiration in the biodegradation test are immediate and differ significantly from background. We show that compounds do not function as substrates, so effects are due to other soil processes, correlate well to sorption characteristics and are not dose dependent. This test provides details of relative antimicrobial potency towards soil microorganisms and can be used to rank compounds. However the test does not provide details on the nature or extent of specific microbial effects. In contrast, the carbon transformation test is more specific and provides a reproducible indication of dose effect relationships, which is more suitable in assessing the effects of these compounds in the environment. Presently, standard guidelines do not take into account the normal input of antibiotics into soils via contaminated sludge or manure. This should be corrected in future guidelines as these inputs alter microbial composition, organic matter, ionic strength and pH affect sorption and overall impact the test results.     

Anaerobic digestion of linear alkyl benzene sulfonates: biodegradation kinetics and metabolite analysis

In the present work the effect of the alkyl chain length and the position of the sulfophenyl substituent of the linear alkylbenzene sulfonates (LAS) on their anaerobic biodegradability have been investigated. Degradation kinetics of the linear alkyl benzene sulfonates homologues, 2C₁₀LAS, 2C₁₂LAS and 2C₁₄LAS, have been studied. It has been also investigated the effect of the isomer type on the degradation rate of the LAS molecule through the comparative study of the 2C₁₀LAS and 5C₁₀LAS isomers. Batch anaerobic biodegradation tests were performed using sludge from the anaerobic digester of a wastewater treatment plant as microorganisms source. Ultimate biodegradation was evaluated from the biogas production whereas primary biodegradation was determined by specific analysis of the surfactant. LAS homologues and isomers showed a negligible primary biodegradation under anaerobic conditions. Furthermore, analysis of sulfophenyl carboxilates (SPC) by LC–MS indicated a low and constant level of these LAS degradation metabolites over the test period. These data are consistent with a minimal transformation of the LAS parent molecule in the anaerobic digesters. On the other hand, the addition of the shortest alkyl chain length homologues, decyl and dodecylbenzene sulfonates, reduces the biogas production whereas the most hydrophobic homologue, the tetradecylbenzene sulfonate, enhances the biogas production. This LAS homologue seems to increase the availability of organic compounds sorbed on the anaerobic sludge promoting their biodegradation.     

Fate of Terpene Compounds in Activated Sludge Wastewater Treatment Systems

ABSTRACT

Terpene-based cleaners are being widely used in industrial cleaning formulations because of their ability to replace suspected ozone-depleting chemicals such as 1,1,1-trichloroethane and 1,1,2-trichloro-1,2,2-trifluoroethane (CFC-113). Substitution of chlorinated solvents with ter-pene-based cleaners, however, is expected to result in increased discharges to wastewater from industrial operations. A pilot-scale study was conducted at the U.S. Environmental Protection Agency's (EPA) Test & Evaluation Facility in Cincinnati, OH, to quantify the fate of specific terpene compounds in the activated sludge wastewater treatment process. Biodegradation rates of terpenes were estimated from the difference between the influent terpene mass flow rates and the amounts volatilized to air, partitioned to waste sludge, and passed through the treatment process unchanged. Any chemical transformation of the terpene compounds studied was attributed to biodegradation.

Analytical methods were developed to determine ter-pene concentrations in aqueous and gaseous media. The fate of two common terpene compounds (d-limonene and terpinolene) were evaluated in three identical pilot-scale systems: (1) a system with a high target spike range (2–10 mg/L), (2) a system with a low target spike range (0.5–2 mg/L), and (3) a control system (no spike).

The study showed that the primary removal mechanism for the terpene compounds in the activated sludge process is biodegradation. Typically, greater than 90% of the mass of terpenes entering the aeration basin of the activated sludge process biodegrades to other compounds; volatilization from the reaction basin accounts for less than 10%, while loss to waste activated sludge and the secondary clarifier effluent accounts for less than 1%.     

Primary biodegradation of veterinary antibiotics in aerobic and anaerobic surface water simulation systems

The primary aerobic and anaerobic biodegradability at intermediate concentrations (50-5000 microg/l) of the antibiotics olaquindox (OLA), metronidazole (MET), tylosin (TYL) and oxytetracycline (OTC) was studied in a simple shake flask system simulating the conditions in surface waters. The purpose of the study was to provide rate data for primary biodegradation in the scenario where antibiotics pollute surface waters as a result of run-off from arable land. The source of antibiotics may be application of manure as fertilizer or excreta of grazing animals. Assuming first-order degradation kinetics, ranges of half-lives for aerobic degradation of the four antibiotics studied were 4-8 days (OLA), 9.5-40 days (TYL), 14-104 days (MET) and 42-46 days (OTC). OLA and OTC were degraded with no initial lag phase whereas lag phases from 2 to 34 days (MET) and 31 to 40 days (TYL) were observed for other substances. The biodegradation behaviour was influenced by neither the concentrations of antibiotics nor the time of the year and location for sampling of surface water. Addition of 1 g/l of sediment or 3 mg/l of activated sludge from wastewater treatment increased the biodegradation potential which is believed to be the result of increased bacterial concentration in the test solution. Biodegradation was significantly slower in tests conducted in absence of oxygen. Assessments of the toxic properties of antibiotics by studying the influence on the biodegradation rates of 14C-aniline at different concentrations of antibiotics showed that no tests were conducted at toxic concentrations.     

Acclimation of anaerobic sludge degrading chlorophenols and the biodegradation kinetics during acclimation period

The acclimation of sludge from Hangzhou citrate factory and Hangzhou municipal wastewater treatment plant for degradation dechlorination of chlorophenols (CPs) compounds, and its biodegradation kinetics were studied in batch process with or without addition of sucrose. Three monochlorophenols (2-CP; 3-CP; 4-CP) and pentachlorophenol (PCP) were concurrently fed to different bioreactors. The parameters that were monitored included biogas production, biogas composition and chemical oxygen demand (COD). The results showed that acclimation with chlorophenol can increase the degradation activity of anaerobic sludge and degradation rate of chlorophenolic compounds, and reduce the lag time. Degradation dechlorination activity of the acclimated sludge strongly depended on sludge source, microorganism population and chlorophenol congener. 2-CP was more easily acclimated than 3-CP and 4-CP. Among the four tested compounds, 4-CP was the most difficult to be acclimated. The observed degradation rate with presence of sucrose was higher than that with absence of sucrose, suggesting that addition of the external carbon source can stimulate the formation of acclimated sludge which could effectively degrade chlorophenols. Kinetic equations of biodegradation of chlorophenols were also presented in this paper.     

Sorption and biodegradation of vapor-phase organic compounds with wastewater sludge and food waste compost

To test the possible use of composted food waste and wastewater sludge as biofilters to treat gas-phase volatile organic compounds (VOCs), batch experiments were conducted with an isolated strain that could degrade aromatic compounds under aerobic conditions. A benzene and trichloroethylene (TCE) mixture was used as the gas-phase pollutant in experiments with composted food waste, sludge, and soil. Under aerobic conditions, benzene was degraded as a primary substrate and TCE was degraded cometabolically, with water contents varying from 6 to 60% (volume of water added/volume of solid). Optimal water content for VOC removal was 12% for the soil, 36% for the composted food waste, and 48% for the sludge. The extent of VOC sorption and biodegradation at the optimal water content was different for each material. With the same initial VOC concentration, more VOCs were removed by sorption onto the composted food waste and the sludge, while less VOCs were biodegraded in comparison with the results using soil. The reason the biodegradation in the soil was greater may be partly attributed to the fact that, due to less sorption, the aqueous-phase concentration of VOCs, which microorganisms could utilize as a carbon source or cometabolize, was higher. We also speculate that the distribution of microorganisms in each medium affects the rate of biodegradation. A large number of microorganisms were attached to the composted food waste and sludge. Mass transfer of VOCs and oxygen to these microorganisms, which appear to have been heterogeneously distributed in clusters, may have been limited, resulting in hindered biodegradation.     

Sorption and Biodegradation of Vapor-Phase Organic Compounds with Wastewater Sludge and Food Waste Compost

ABSTRACT

To test the possible use of composted food waste and wastewater sludge as biofilters to treat gas-phase volatile organic compounds (VOCs), batch experiments were conducted with an isolated strain that could degrade aromatic compounds under aerobic conditions. A benzene and trichloroethylene (TCE) mixture was used as the gas-phase pollutant in experiments with composted food waste, sludge, and soil. Under aerobic conditions, benzene was degraded as a primary substrate and TCE was degraded cometabolically, with water contents varying from 6 to 60% (volume of water added/volume of solid). Optimal water content for VOC removal was 12% for the soil, 36% for the composted food waste, and 48% for the sludge.

The extent of VOC sorption and biodegradation at the optimal water content was different for each material. With the same initial VOC concentration, more VOCs were removed by sorption onto the composted food waste and the sludge, while less VOCs were biodegraded in comparison with the results using soil. The reason the biodegradation in the soil was greater may be partly attributed to the fact that, due to less sorption, the aqueous-phase concentration of VOCs, which microorganisms could utilize as a carbon source or cometabolize, was higher. We also speculate that the distribution of microorganisms in each medium affects the rate of biodegradation. A large number of microorganisms were attached to the composted food waste and sludge. Mass transfer of VOCs and oxygen to these microorganisms, which appear to have been heterogeneously distributed in clusters, may have been limited, resulting in hindered biodegradation.     

Leachates from solid wastes: chemical and eco(geno)toxicological differences between leachates obtained from fresh and stabilized industrial organic sludge

The chemical and ecotoxicological characteristics of fresh and stabilized industrial organic sludge leachates were compared to obtain information regarding how the stabilization process can influence the ecotoxic potential of this industrial waste, which could be used for the amendment of degraded soil. Physicochemical analysis of the sludge leachates, as well as a battery of eco(geno)toxicity tests on bacteria, algae, daphnids, and higher plants (including Vicia faba genotoxicity test) and the determination of hydrolytic enzyme activity, was performed according to standard methods. The chemical comparison of the two types of leachate showed that the samples obtained from stabilized sludge had a lower organic content and higher metal content than leachates of the fresh sludge. The eco(geno)toxicological results obtained with aquatic organisms showed that the stabilized sludge leachate was more toxic than the fresh sludge leachate, both originating from the same industrial organic sludge sample. Nevertheless, phytotoxicity tests carried out with a reference peat soil irrigated with stabilized sludge leachate showed the same toxicity as the fresh sludge leachate. In the case of the industrial solid organic sludge studied, stabilization through a biodegradation process promoted a higher metal mobility/bioavailability/eco(geno)toxicity in the stabilized sludge leachate compared to the fresh sludge leachate.     

A method for measuring the anoxic biodegradability under denitrifying conditions

A test for assessing the anoxic biodegradability of organic compounds under denitrifying conditions is proposed. The method is based on the recovery and quantification of the CO2 produced, which is evidence of complete biodegradation of the test compound (added as the sole carbon source). The tests were carried out in a mineral medium, with nitrate as electron acceptor. Whole lake sediments, sediment extracts and a commercial inoculum were assayed as a possible inoculum source by means of glucose biodegradability tests. It was found that the sediment extracts constitute a suitable and environmentally-relevant inoculum source, since they add non-significant amounts of carbon to the tests. Two xenobiotic compounds, namely, aniline and phenol, were tested in the aforementioned conditions as well as in a standard aerobic biodegradability test. Both aniline and phenol attained a biodegradation level higher than 60% in a short time period (<28 days) and thus can be considered as readily biodegradable in denitrifying environments. Nevertheless, the kinetics obtained in the anoxic test were slower than in aerobic conditions, and even suggested the accumulation of intermediate metabolites in the case of phenol. The results of this study indicate that the fate of xenobiotic compounds under anoxic conditions differs from that observed in an oxic environment, and therefore it should be considered by standard biodegradability testing procedures.     

Evaluation of the toxicity of substances to be assessed for biodegradability

The ability to distinguish between true non-biodegradability, and inhibition of biodegradability due to the toxic effects of the compound tested present problems. It results in possible false identification of substances as non-biodegradable.Six chemicals were evaluated in a variety of tests to assess their toxicity to aerobic sludge organisms. The tests employed were: BOD₅ and Closed Bottle inhibition tests, inhibition of respiration of activated sludge, growth inhibition of activated sludge, light emission from (MICROTOX test) and the repetitive die-away test (RDA). Results from these tests were compared with results obtained from a number of ready biodegradability tests using the compounds listed above at anticipated non-toxic and toxic concentrations.No test method evaluated consistently forecast toxicity due to the chemicals tested. The MICROTOX and nitrification inhibition tests were too sensitive. A combination of sludge respiration rate and/or growth tests seem most appropriate. To avoid toxicity to the sludge, biodegradability testing should be made at 10% of the EC₅₀ value. Compounds with an EC₅₀ value greater than 300 mg/l are unlikely to be toxic in ready biodegradability tests. Compounds with an EC₅₀ value of less than 20 mg/l may pose problems necessitating the use of the stringent closed bottle test, or the use of C¹⁴ labelled test materials. Compounds with an intermediate EC₅₀ that is between 20–300 mg/l, need to be evaluated at a range of concentrations in biodegradability tests, or may need to be evaluated carefully to define the precise no-effect level. Procedure recommendations to distinguish between the inhibition of biodegradability and inertness of the test substance are made.     

Evaluation of a respirometric test method to determine the heterotrophic yield coefficient of activated sludge bacteria

The heterotrophic yield coefficient of activated sludge bacteria is an important parameter in the field of wastewater degradation kinetics and the determination of degradation kinetics of defined chemicals. With the help of easily biodegradable organic compounds like glucose and acetate the respiration kinetics of degrading activated sludge bacteria was studied. The results of the respiration analysis were transformed to examine the degradation and respiration kinetics of municipal wastewaters at different food to microorganism ratios (F/M ratios). It was proved that the heterotrophic yield coefficient of aerobically degrading activated sludge bacteria could reliably be determined and that the heterotrophic yield coefficient was independent of the F/M ratio over a wide range.     

Investigation of triclosan fate and toxicity in continuous-flow activated sludge systems

The purpose of this research was to study the fate and toxicity of triclosan (TCS) in activated sludge systems and to investigate the role of biodegradation and sorption on its removal. Two continuous-flow activated sludge systems were used; one system was used as a control, while the other received TCS concentrations equal to 0.5 and 2mgl(-1). At the end of the experiment, 1mgl(-1) TCS was added in the control system to investigate TCS behaviour and effects on non-acclimatized biomass. For all concentrations tested, more than 90% of the added TCS was removed during the activated sludge process. Determination of TCS in the dissolved and particulate phase and calculation of its mass flux revealed that TCS was mainly biodegraded. Activated sludge ability to biodegrade TCS depended on biomass acclimatization and resulted in a mean biodegradation of 97%. Experiments with batch and continuous-flow systems revealed that TCS is rapidly sorbed on the suspended solids and afterwards, direct biodegradation of sorbed TCS is performed. Regarding TCS effects on activated sludge process, addition of 0.5mgl(-1) TCS on non-acclimatized biomass initially deteriorated ammonia removal and nitrification capacity. After acclimatization of biomass, nitrification was fully recovered and further increase of TCS to 2mgl(-1) did not affect the performance of activated sludge system. The effect of TCS on organic substrate removal was minor for concentrations up to 2mgl(-1), indicating that heterotrophic microorganisms are less sensitive to TCS than nitrifiers.