Greenhouse gas emissions during cattle feedlot manure composting

The emission of greenhouse gases (GHG) during feedlot manure composting reduces the agronomic value of the final compost and increases the greenhouse effect. A study was conducted to determine whether GHG emissions are affected by composting method. Feedlot cattle manure was composted with two aeration methods--passive (no turning) and active (turned six times). Carbon lost in the forms of CO2 and CH4 was 73.8 and 6.3 kg C Mg-1 manure for the passive aeration treatment and 168.0 and 8.1 kg C Mg-1 manure for the active treatment. The N loss in the form of N2O was 0.11 and 0.19 kg N Mg-1 manure for the passive and active treatments. Fuel consumption to turn and maintain the windrow added a further 4.4 kg C Mg-1 manure for the active aeration treatment. Since CH4 and N2O are 21 and 310 times more harmful than CO2 in their global warming effect, the total GHG emission expressed as CO2-C equivalent was 240.2 and 401.4 kg C Mg-1 manure for passive and active aeration. The lower emission associated with the passive treatment was mainly due to the incomplete decomposition of manure and a lower gas diffusion rate. In addition, turning affected N transformation and transport in the window profile, which contributed to higher N2O emissions for the active aeration treatment. Gas diffusion is an important factor controlling GHG emissions. Higher GHG concentrations in compost windrows do not necessarily mean higher production or emission rates.     

Greenhouse gas emissions from forestry operations: a life cycle assessment

Most forest carbon assessments focus only on biomass carbon and assume that greenhouse gas (GHG) emissions from forestry activities are minimal. This study took an in-depth look at the direct and indirect emissions from Pacific Northwest (PNW) Douglas-fir [Pseudotsuga menziesii (Mirbel) Franco] forestry activities to support or deny this claim. Greenhouse gas budgets for 408 "management regimes" were calculated using Life Cycle Assessment (LCA) methodology. These management regimes were comprised of different combinations of three types of seedlings (P + 1, 1 + 1, and large plug), two types of site preparation (pile and burn, and chemical), 17 combinations of management intensity including fertilization, herbicide treatment, pre-commercial thinning (PCT), commercial thinning (CT), and nothing, and four different rotation ages (30, 40, 50, and 60 yr). Normalized to 50 yr, average direct GHG emissions were 8.6 megagrams (Mg) carbon dioxide equivalents (CO2e) ha(-1), which accounted for 84% of total GHG emissions from the average of 408 management regimes. Harvesting (PCT, CT, and clear cutting) contributed the most to total GHG emissions (5.9 Mg CO2e per 700 m3 harvested timber), followed by pile and burn site preparation (4.0 Mg CO2e ha(-1) or 32% of total GHG emissions) and then fertilization (1.9 Mg CO2e ha(-1) or 15% of total GHG emissions). Seedling production, seedling transportation, chemical site preparation, and herbicide treatment each contributed less than 1% of total GHG emissions when assessed per hectare of planted timberland. Total emissions per 100 m3 averaged 1.6 Mg CO2e ha(-1) over all 408 management regimes. An uncertainty analysis using Monte Carlo simulations revealed that there are significant differences between most alternative management regimes.     

Greenhouse gas emissions and energy balance of sunflower biodiesel: Identification of its key factors in the supply chain

The production of first generation biofuels, such as sunflower-based biodiesel, is potentially an option for diversifying the energy matrix in several South American countries. However, biofuels present environmental challenges, especially concerning the reduction of greenhouse gas (GHG) emissions. This study, using a life-cycle approach, evaluates the GHG emissions and energy balance of the future nationwide production of sunflower-based biodiesel in Chile. Direct land use change is included in the analysis. The overall findings indicate that sunflower biodiesel, under the most likely production conditions, will have better environmental performance than fossil diesel in terms of both indicators. The agricultural stage is associated to key factors such as land use change, and nitrogen fertilizers. These factors contribute significantly to GHG emissions or energy demand in the biodiesel life cycle. The sensitivity analysis shows that no GHG emission saving could occur if nitrogen fertilizers rate exceeds 330 kg N/ha. In order to reduce the environmental impacts of this biofuel, improvement measures are suggested.     

Greenhouse gas emissions along the rural-urban gradient

This paper investigates how land use relates to greenhouse gas emissions, using data sources that are readily available to municipal planners. It presents a causal framework linking settlement patterns to greenhouse gas emissions via landscape impacts (deforestation, carbon sequestration by soils and plants, urban heat island), infrastructure impacts (transportation-related emissions, waste management-related emissions, electric transmission and distribution losses) and buildings (residential, commercial). This is not a full accounting because it does not include impacts from industrial activities, agriculture and consumer behavior not related to land use, such as food consumption and air travel. Exploratory case studies of municipalities lying along a gradient of increasing population density suggest that per-capita carbon dioxide emissions vary widely, following an inverted ‘U’ shape, with post-war suburbs riding the pinnacle. Reflecting their central regional roles, municipalities with good jobs-to-housing ratios have higher per-capita emissions because they host both residential and commercial buildings. Buildings typically contribute more emissions than personal transportation. Vehicle-miles traveled per capita shrink most dramatically at very high population densities and where transit options exist. Changing land-use patterns is a political challenge because localism and outdated zoning ordinances subvert regional solutions. Technical fixes, especially green buildings, must be part of the solution.     

The effect of phosphogypsum on greenhouse gas emissions during cattle manure composting

Phosphogypsum (PG), a by-product of the phosphate fertilizer industry, reduces N losses when added to composting livestock manure, but its impact on greenhouse gas emissions is unclear. The objective of this research was to assess the effects of PG addition on greenhouse gas emissions during cattle feedlot manure composting. Sand was used as a filler material for comparison. The seven treatments were PG10, PG20, PG30, S10, S20, and S30, representing the rate of PG or sand addition at 10, 20, or 30% of manure dry weight and a check treatment (no PG or sand) with three replications. The manure treatments were composted in open windrows and turned five times during a 134-d period. Addition of PG significantly increased electrical conductivity (EC) and decreased pH in the final compost. Total carbon (TC), total nitrogen (TN), and mineral nitrogen contents in the final composted product were not affected by the addition of PG or sand. From 40 to 54% of initial TC was lost during composting, mostly as CO(2), with CH(4) accounting for <14%. The addition of PG significantly reduced CH(4) emissions, which decreased exponentially with the compost total sulfur (TS) content. The emission of N(2)O accounted for <0.2% of initial TN in the manure, increasing as compost pH decreased from alkaline to near neutral. Based on the total greenhouse gas budget, PG addition reduced greenhouse gas emissions (CO(2)-C equivalent) during composting of livestock manure by at least 58%, primarily due to reduced CH(4) emission.     

Carbon, nitrogen balances and greenhouse gas emission during cattle feedlot manure composting

Carbon and N losses reduce the agronomic value of compost and contribute to greenhouse gas (GHG) emissions. This study investigated GHG emissions during composting of straw-bedded manure (SBM) and wood chip-bedded manure (WBM). For SBM, dry matter (DM) loss was 301 kg Mg(-1), total carbon (TC) loss was 174 kg Mg(-1), and total nitrogen (TN) loss was 8.3 kg Mg(-1). These correspond to 30.1% of initial DM, 52.8% of initial TC, and 41.6% of initial TN. For WBM, DM loss was 268 kg Mg(-1), TC loss was 154 kg Mg(-1), and TN loss was 1.40 kg Mg(-1), corresponding to 26.5, 34.5, and 11.8% of initial amounts. Most C was lost as CO2 with CH4 accounting for <6%. However, the net contribution to greenhouse gas emissions was greater for CH4 since it is 21 times more effective at trapping heat than CO2. Nitrous oxide (N2O) emissions were 0.077 kg N Mg(-1) for SBM and 0.084 kg N Mg(-1) for WBM, accounting for 1 to 6% of total N loss. Total GHG emissions as CO2-C equivalent were not significantly different between SBM (368.4 +/- 18.5 kg Mg(-1)) and WBM (349.2 +/- 24.3 kg Mg(-1)). However, emission of 368.4 kg C Mg(-1) (CO2-C equivalent) was greater than the initial TC content (330.5 kg Mg(-1)) of SBM, raising the question of the net benefits of composting on C sequestration. Further study is needed to evaluate the impact of composting on overall GHG emissions and C sequestration and to fully investigate livestock manure management options.     

Greenhouse gas and alcohol emissions from feedlot steers and calves

Livestock's contributions to climate change and smog-forming emissions are a growing public policy concern. This study quantifies greenhouse gas (GHG) and alcohol emissions from calves and feedlot steers. Carbon dioxide (CO) methane (CH), nitrous oxide (NO), ethanol (EtOH), and methanol (MeOH) were measured from a total of 45 Holstein and Angus steers and 9 Holstein calves representative of four different growth stages commonly present on calf ranches and commercial feedlots. Individuals from each animal type were randomly assigned to three equal replicate groups of nine animals per group. Steers were fed a high concentrate diet and calves a milk replacer and grain supplement. Cattle and calves were housed in groups of three animals in an environmental chamber for 24 h. The CO, NO, EtOH, and MeOH concentrations from the air inlet and outlet of the chamber were measured using an INNOVA 1412 monitor and CH using a TEI 55C methane analyzer. Emission rates (g head h) were calculated. The GHGs were mainly produced by enteric fermentation and respiration and differed across life stages of cattle. Compared with dairy cows, feedlot steers produce relatively less GHG. In general, ethanol and methanol, the most important volatile organic compound (VOC) group in the dairy sector, were below the lower limit of detection of the gas analyzer. The present data will be useful to verify models and to enhance GHG emission inventories for enteric fermentation, respiration, and fresh excreta for numerous cattle life stages across the beef industry.     

Greenhouse gas emissions during co-composting of calf mortalities with manure

Composting may be a viable on-farm option for disposal of cattle carcasses. This study investigated greenhouse gas emissions during co-composting of calf mortalities with manure. Windrows were constructed that contained manure + straw (control compost [CK]) or manure + straw + calf mortalities (CM) using two technologies: a tractor-mounted front-end loader or a shredder bucket. Composting lasted 289 d. The windrows were turned twice (on Days 72 and 190), using the same technology used in their creation. Turning technology had no effect on greenhouse gas emissions or the properties of the final compost. The CO2 (75.2 g d(-1) m(-2)), CH4 (2.503 g d(-1) m(-2)), and N2O (0.370 g d(-1) m(-2)) emissions were higher (p < 0.05) in CM than in CK (25.7, 0.094, and 0.076 g d(-1) m(-2) for CO2, CH4, and N2O, respectively), which reflected differences in materials used to construct the compost windrows and therefore their total C and total N contents. The final CM compost had higher (p < 0.05) total N, total C, and mineral N content (NO3*+ NO2* + NH4+) than did CK compost and therefore has greater agronomic value as a fertilizer.     

The greenhouse gas balance of the Province of Siena

There is a profound debate over how to assign greenhouse gas (GHG) responsibilities; therefore, we have decided to follow IPCC guidelines, as they offer the only standardized method. We have identified each type of greenhouse emission and its level of absorption. We have studied the province and its districts and municipalities. We have determined that the energy sector is that with the highest level of emissions, even if the per capita emissions of the Province of Siena are very low. This is caused by a very low level of industrialization and the presence of a local geothermal production of energy. In order to highlight this aspect, we have considered scenarios both with and without geothermal production. Our research was then focused on single districts (groups of homogenous municipalities) and municipalities, where we found great differences among the greenhouse emissions of the areas. We have constructed a map of the greenhouse emissions of the whole province. It has been interesting to note that there are 14 municipalities with net negative emissions, seven with low positive emissions, 12 with medium positive emissions and three with elevated positive emissions. These latter correspond to the main city and to two of the most industrialized municipalities.     

Greenhouse gas Emissions projections and mitigation options for the Czech Republic, 1990–2010

The models used to assess greenhouse gas mitigation options for the Czech Republic are discussed and compared with respect to their capabilities and ease of use. The input data and preliminary results are described. According to the projections, Czech CO₂ emissions will not exceed their 1990 level until 2010. Assessment of several mitigation options shows that a 6% reduction in CO₂ emissions can be achieved using cost-effective technologies. Key areas for mitigation measures are fuel switching from brown coal to natural gas through replacement of boilers, efficiency improvements in household heating, and use of compact fluorescent lamps.     

Greenhouse gas Emissions projections and mitigation options for the Czech Republic, 1990–2010

The models used to assess greenhouse gas mitigation options for the Czech Republic are discussed and compared with respect to their capabilities and ease of use. The input data and preliminary results are described. According to the projections, Czech CO₂ emissions will not exceed their 1990 level until 2010. Assessment of several mitigation options shows that a 6% reduction in CO₂ emissions can be achieved using cost-effective technologies. Key areas for mitigation measures are fuel switching from brown coal to natural gas through replacement of boilers, efficiency improvements in household heating, and use of compact fluorescent lamps.

     

Greenhouse gas emissions from two soils receiving nitrogen fertilizer and swine manure slurry

The interactive effects of soil texture and type of N fertility (i.e., manure vs. commercial N fertilizer) on N(2)O and CH(4) emissions have not been well established. This study was conducted to assess the impact of soil type and N fertility on greenhouse gas fluxes (N(2)O, CH(4), and CO(2)) from the soil surface. The soils used were a sandy loam (789 g kg(-1) sand and 138 g kg(-1) clay) and a clay soil (216 g kg(-1) sand, and 415 g kg(-1) clay). Chamber experiments were conducted using plastic buckets as the experimental units. The treatments applied to each soil type were: (i) control (no added N), (ii) urea-ammonium nitrate (UAN), and (iii) liquid swine manure slurry. Greenhouse gas fluxes were measured over 8 weeks. Within the UAN and swine manure treatments both N(2)O and CH(4) emissions were greater in the sandy loam than in the clay soil. In the sandy loam soil N(2)O emissions were significantly different among all N treatments, but in the clay soil only the manure treatment had significantly higher N(2)O emissions. It is thought that the major differences between the two soils controlling both N(2)O and CH(4) emissions were cation exchange capacity (CEC) and percent water-filled pore space (%WFPS). We speculate that the higher CEC in the clay soil reduced N availability through increased adsorption of NH(4)(+) compared to the sandy loam soil. In addition the higher average %WFPS in the sandy loam may have favored higher denitrification and CH(4) production than in the clay soil.     

Greenhouse gas emissions and soil indicators four years after manure and compost applications

Understanding how carbon, nitrogen, and key soil attributes affect gas emissions from soil is crucial for alleviating their undesirable residual effects that can linger for years after termination of manure and compost applications. This study was conducted to evaluate the emission of soil CO2, N2O, and CH4 and soil C and N indicators four years after manure and compost application had stopped. Experimental plots were treated with annual synthetic N fertilizer (FRT), annual and biennial manure (MN1 and MN2, respectively), and compost (CP1 and CP2, respectively) from 1992 to 1995 based on removal of 151 kg N ha(-1) yr(-1) by continuous corn (Zea mays L.). The control (CTL) plots received no input. After 1995, only the FRT plots received N fertilizer in the spring of 1999. In 1999, the emissions of CO2 were similar between control and other treatments. The average annual carbon input in the CTL and FRT plots were similar to soil CO2-C emission (4.4 and 5.1 Mg C ha(-1) yr(-1), respectively). Manure and compost resulted in positive C and N balances in the soil four years after application. Fluxes of CH4-C and N2O-N were nearly zero, which indicated that the residual effects of manure and compost four years after application had no negative influence on soil C and N storage and global warming. Residual effects of compost and manure resulted in 20 to 40% higher soil microbial biomass C, 42 to 74% higher potentially mineralizable N, and 0.5 unit higher pH compared with the FRT treatment. Residual effects of manure and compost on CO2, N20, and CH4 emissions were minimal and their benefits on soil C and N indicators were more favorable than that of N fertilizer.     

Greenhouse gas emissions from conventional, agri-environmental scheme, and organic Irish suckler-beef units

The problems of overproduction within the European Union countries and the environmental impact of agriculture have lead to the introduction of schemes that aim to reduce both. Beef (Bos taurus) production forms a large component of the Irish agricultural industry and accounts for more than one quarter of agricultural economic output. Recently, the European CAP (Common Agricultural Policy) has been re-evaluated to include supplementary measures that encompass the environmental role of agriculture rather than just the production role. A life cycle assessment (LCA) method was adopted to estimate emissions per kilogram of CO2 equivalent per kilogram of live weight (LW) leaving the farm gate per annum (kg CO2 kg(-1) LW yr(-1)) and per hectare (kg CO2 ha(-1) yr(-1)). Fifteen units engaged in suckler-beef production (five conventional, five in an Irish agri-environmental scheme, and five organic units) were evaluated for emissions per unit product and area. The average emissions from the conventional units were 13.0 kg CO2 kg(-1) LW yr(-1), from the agri-environmental scheme units 12.2 kg CO2 kg(-1) LW yr(-1), and from the organic units 11.1 kg CO2 kg LW yr(-1). The average emissions per unit area from the conventional units was 5346 kg CO2 ha(-1) yr(-1), from the agri-environmental scheme units 4372 kg CO2 ha(-1) yr(-1), and from the organic units 2302 kg CO2 ha(-1) yr(-1). Results indicated that moving toward extensive production could reduce emissions per unit product and area but live weight production per hectare would be reduced.     

Greenhouse gas emissions and poverty alleviation nexus in the Economic Commission of West African States

This paper investigates the nexus between greenhouse gas emissions and poverty alleviation in the Economic Commission of West African States between 1985 and 2020 applying autoregressive distributed lag and Granger causality techniques. The results reveal that carbon dioxide non-significantly relates to gross domestic product per capita positively while nitrous oxide and foreign direct investment impacts gross domestic product per capita positively. Methane negatively impacts gross domestic product per capita. The governments should use conventions to regulate greenhouse gas emissions’ effects on environmental degradation regionally and globally. The study underscores that countries should diversify to cleaner energy sources. This would reduce greenhouse gas emissions in the atmosphere. Massive technological investment is required to mitigate the greenhouse gas emissions’ negative impacts on the environment which create poverty. This policy implication ensures environmental sustainability and reverses the ugly trend of greenhouse gas emissions on poverty.     

Greenhouse gas emissions in Canada and Japan: sector-specific estimates and managerial and economic implications

Many firms generate large amounts of carbon dioxide and other greenhouse gases when they burn fossil fuels in their production processes. In addition, production of raw materials and other inputs the firms procure for their operations also generates greenhouse gases indirectly. These direct and indirect greenhouse gas emissions occur in many sectors of our economies. In this paper, we first present sector-specific estimates for such greenhouse gas emissions. We then show that estimates for such sector-specific greenhouse gas emissions are often required for various types of corporate as well as public policy analyses in both domestic and international contexts. Measuring greenhouse gas emissions resulting from firms' multi-stage production processes in a multi-sector context is relevant for policies related to the Kyoto protocol, an international agreement to limit global greenhouse gas emissions. For example, since the protocol allows firms to engage in trading and offsetting of their greenhouse gas emissions across national borders, provided that emissions are correctly measured, the firms can take advantage of such trading schemes by placing their energy-intensive production facilities globally and strategically. We present several case studies which illustrate the importance of this and other aspects of greenhouse gas emissions in firms' environmental management. We also argue that our modeling and estimation methods based on input-output analyses are suitable for the types of research goals we have in this paper. Our methods are applied to data for Canada and Japan in a variety of environmental management circumstances.     

Antibiotic degradation during manure composting

On-farm manure management practices, such as composting, may provide a practical and economical option for reducing antibiotic concentrations in manure before land application, thereby minimizing the potential for environmental contamination. The objective of this study was to quantify degradation of chlortetracycline, monensin, sulfamethazine, and tylosin in spiked turkey (Meleagris gallopavo) litter during composting. Three manure composting treatments were evaluated: a control treatment (manure pile with no disturbance or adjustments after initial mixing), a managed compost pile (weekly mixing and moisture content adjustments), and vessel composting. Despite significant differences in temperature, mass, and nutrient losses between the composting treatments and the control, there was no difference in antibiotic degradation among the treatments. Chlortetracycline concentrations declined rapidly during composting, whereas monensin and tylosin concentrations declined gradually in all three treatments. There was no degradation of sulfamethazine in any of treatments. At the conclusion of the composting period (22-35 d), there was >99% reduction in chlortetracycline, whereas monensin and tylosin reduction ranged from 54 to 76% in all three treatments. Assuming first-order decay, the half-lives for chlortetracycline, monensin, and tylosin were 1, 17, and 19 d, respectively. These data suggest that managed compositing in a manure pile or in a vessel is not better than the control treatment in degrading certain antibiotics in manure. Therefore, low-level manure management, such as stockpiling, after an initial adjustment of water content may be a practical and economical option for livestock producers in reducing antibiotic levels in manure before land application.     

Veterinary antimicrobials in feedlot manure: dissipation during composting and effects on composting processes

Composting of manure may lead to the degradation of veterinary antimicrobials, but it is largely unknown if the presence of antimicrobials affects the composting process. Open-air windrow composting of manure from beef cattle (Bos taurus) administered chlortetracycline, sulfamethazine, and tylosin was investigated in a 2-yr study. At windrow construction, chlortetracycline had extensively isomerized to iso-chlortetracycline. Sulfamethazine, tylosin, and iso-chlortetracycline dissipated by first-order kinetics, whereas the dissipation of enol/keto-chlortetracycline was better described by exponential equations. At the end of the composting period, proportions of antimicrobials remaining were as follows: iso-chlortetracycline (< 1%), chlortetracycline (1 to 4.5%), tylosin (6.3%), and sulfamethazine (6.8% [2005], 41% [2006]). Times for 50% dissipation (DT50) decreased in the order: tylosin (20.3 to 43.5 d) > iso-chlortetracycline (13.5 to 26.5 d) > enol/keto-chlortetracycline (5.5 to 9.8 d). The DT50 values for sulfamethazine varied from 26.8 d in 2005 to 237 d in 2006. Treatments with chlortetracycline showed significantly reduced temperature rises (10.1 to 11.0 degrees C) between Days 21 to 28 in 2006 compared with rises of 26.6 to 31.0 degrees C for control and tylosin treatments, suggesting an inhibition of microbial activity. During composting in 2005, manure from cattle administered chlortetracycline at 44 mg kg(-1) of feed lost significantly less dry matter, carbon, and nitrogen than manure from cattle fed 11 mg chlortetracycline kg(-1) of feed, implying that the higher level of chlortetracycline inhibited microbial decomposition of organic matter. The study shows that while composting leads to dissipation of antimicrobials, the microbially driven composting process may be inhibited by their presence.     

Greenhouse gas mitigation options in the Forest sector of Russia: National and project level assessments

Greenhouse gas (GHG) mitigation options in the Russian forest sector include: afforestation and reforestation of unforested/degraded land area; enhanced forest productivity; incorporation of nondestructive methods of wood harvesting in the forest industry; establishment of land protective forest stands; increase in stand age of final harvest in the European part of Russia; increased fire control; increased disease and pest control; and preservation of old growth forests in the Russian Far-East, which are presently threatened. Considering the implementation of all of the options presented, the GHG mitigation potential within the forest and agroforestry sectors of Russia is approximately 0.6–0.7 Pg C/yr or one half of the industrial carbon emissions of the United States. The difference between the GHG mitigation potential and the actual level of GHGs mitigated in the Russian forest sector will depend to a great degree on external financing that may be available. One possibility for external financing is through joint implementation (JI). However, under the JI process, each project will be evaluated by considering a number of criteria including also the difference between the carbon emissions or sequestration for the baseline (or reference) and the project case, the permanence of the project, and leakage. Consequently, a project level assessment must appreciate the near-term constraints that will face practitioners who attempt to realize the GHG mitigation potential in the forest and agroforestry sectors of their countries.

     

Greenhouse gas mitigation options in the Forest sector of Russia: National and project level assessments

Greenhouse gas (GHG) mitigation options in the Russian forest sector include: afforestation and reforestation of unforested/degraded land area; enhanced forest productivity; incorporation of nondestructive methods of wood harvesting in the forest industry; establishment of land protective forest stands; increase in stand age of final harvest in the European part of Russia; increased fire control; increased disease and pest control; and preservation of old growth forests in the Russian Far-East, which are presently threatened. Considering the implementation of all of the options presented, the GHG mitigation potential within the forest and agroforestry sectors of Russia is approximately 0.6–0.7 Pg C/yr or one half of the industrial carbon emissions of the United States. The difference between the GHG mitigation potential and the actual level of GHGs mitigated in the Russian forest sector will depend to a great degree on external financing that may be available. One possibility for external financing is through joint implementation (JI). However, under the JI process, each project will be evaluated by considering a number of criteria including also the difference between the carbon emissions or sequestration for the baseline (or reference) and the project case, the permanence of the project, and leakage. Consequently, a project level assessment must appreciate the near-term constraints that will face practitioners who attempt to realize the GHG mitigation potential in the forest and agroforestry sectors of their countries.