湿法再生吸附剂制备及用于大气CO2的直接捕集

基于湿法再生吸附技术,利用强碱性季铵盐树脂材料制备了异相吸附剂薄膜,应用于大气中极低CO2的直接分离,以对抗全球变暖。通过滴定法分析吸附剂材料的电荷密度和吸附容量,利用SEM分析不同工况下制备出来的膜材料的表观结构,并对膜材料进行CO2吸附性能的测试。结果发现,热处理能够明显提高膜材料的吸附性能,还研究吸附剂制备对吸附速率,吸附量和机械强度等性能的影响,发现粒径小于43μm的树脂粉末,按60％质量分数制成的500μm厚膜材料具有较优的综合性能。     

Evaluation of Canisters for Measuring Emissions of Volatile Organic Air Pollutants from Hazardous Waste Incineration

Regulation to control air emissions of toxic organic compounds require the collection and analysis of effluent gas from low level sources such as hazardous waste incinerators. The standard SW- 846 Method specifies the use of Tenax and Tenax/charcoal adsorbent traps for collection of volatile organics from incinerators. This study evaluates passivated stainless steel canisters as an alternative to adsorbent traps to eliminate some of the problems associated with adsorbent sampling. Initially the stability of 18 nonpolar, volatile organic compounds was determined in Summa-treated stainless steel canisters with greater than 100 ppmv HCI and saturated with water vapor. All 18 components were stable for a twoweek period; however, an Interference caused a 10-fold increase In the FID response of trlchloroethylene, toluene, and chlorobenzene. No Interference of the ECD response was found for any of the 11 compounds detected with the ECD including trlchloroethylene. A pilot scale incinerator was sampled using canisters, and the destruction efficiency of 1,1,1-trichloroethane was determined at a concentration of less than 0.5 ppbv while determining 1,1-dichloroethylene, the major product of Incomplete combustion, at a concentration of 8000 ppbv from the same sample.     

Selective removal of organochlorine pesticides (OCPs) from aqueous solution by triolein-embedded composite adsorbent

A novel composite adsorbent (CA-T) was used for the selective removal of organochlorine pesticides (OCPs) from aqueous solution. The adsorbent was composed of the supporting activated carbon and the surrounding triolein-embedded cellulose acetate membrane. Scanning electron microscopy (SEM), N2 adsorption isotherms and fluorescence methods were used to characterize the physicochemical properties of CA-T. Triolein was perfectly embedded in the cellulose acetate membrane and deposited on the surface of activated carbon. The adsorbent was stable in water and no triolein leakage was detected during the test periods. Some organochlorine pesticides (OCPs), such as dieldrin, endrin, aldrin, and heptachlor epoxide, were used as model contaminants and removed by CA-T in laboratory batch experiments. The adsorption isotherm followed the Freundlich equation and the kinetic data fitted well to the pseudo-second-order reaction model. Results also indicated that CA-T appeared to be a promising adsorbent with good selectivity and satisfactory removal rate for lipophilic OCPs from aqueous solutions when present in trace amounts. The adsorption rate and removal efficiency for lipophilic OCPs were positively related to their octanol-water partition coefficients (log K(ow)). Lower residual concentrations of OCPs were achieved when compared to granular activated carbon (GAC).     

难降解氯代有机物污染环境的生物修复技术研究进展

氯代有机物是一类在生产和生活中广泛应用并被大量排放到环境中的难降解有机污染物质,一旦进入生态环境,就会在水体、土壤和底质中长期残留,并在食物链中不断积累、富集,从而对生物体产生危害。因此,对受这类难降解有机物污染的环境修复是目前所迫切需要解决的环境问题之一。基于物理和化学修复方法成本较高易造成二次污染,文中探讨了国内外生物修复技术的研究进展,并对难降解氯代有机物污染环境修复的研究方向进行了展望,由于环境中的污染物质复杂多变,联合生物修复技术将成为未来的研究热点。     

Selective removal of organochlorine pesticides (OCPs) from aqueous solution by triolein-embedded composite adsorbent

A novel composite adsorbent (CA-T) was used for the selective removal of organochlorine pesticides (OCPs) from aqueous solution. The adsorbent was composed of the supporting activated carbon and the surrounding triolein-embedded cellulose acetate membrane. Scanning electron microscopy (SEM), N₂ adsorption isotherms and fluorescence methods were used to characterize the physicochemical properties of CA-T. Triolein was perfectly embedded in the cellulose acetate membrane and deposited on the surface of activated carbon. The adsorbent was stable in water and no triolein leakage was detected during the test periods. Some organochlorine pesticides (OCPs), such as dieldrin, endrin, aldrin, and heptachlor epoxide, were used as model contaminants and removed by CA-T in laboratory batch experiments. The adsorption isotherm followed the Freundlich equation and the kinetic data fitted well to the pseudo-second-order reaction model. Results also indicated that CA-T appeared to be a promising adsorbent with good selectivity and satisfactory removal rate for lipophilic OCPs from aqueous solutions when present in trace amounts. The adsorption rate and removal efficiency for lipophilic OCPs were positively related to their octanol-water partition coefficients (log K _ow). Lower residual concentrations of OCPs were achieved when compared to granular activated carbon (GAC).     

Investigation on the adsorption capability of egg shell membrane towards model textile dyes

Adsorption isotherms of Direct Red 80 (DR80) and Acid Blue 25 (AB25) on the egg shell membrane (ESM) were performed at 20 ± 1 °C. Physical characteristics of ESM such as surface area and presence of functional groups were verified. The Fourier transform infra-red (FTIR) spectra proved the presence of fuctional groups such as hydroxyl, amine and carbonyl groups in ESM. The surface area of ESM was found to be 2.2098 m²/g. The effects of operational parameters such as initial dye concentration, pH₀, contact time, particle size and ESM doses were studied. The Langmuir, Freundlich, BET, Redlich-Peterson and Temkin adsorption models were applied to describe the equilibrium isotherms. The pseudo-first-order and pseudo-second-order kinetics models were examined to evaluate the kinetics data at different pH₀ values (2–12) and the rate constants were calculated. Maximum desorption of 81.8% was achieved for both dyes in aqueous solution at pH₀ 12. Also scanning electron micrographs (SEM) of the treated and untreated adsorbent were performed. Results indicate that ESM could be employed as a natural and Eco-Friendly adsorbent material for the removal of trace organics in solutions.     

Bioregeneration of powdered activated carbon in the treatment of alkyl-substituted phenolic compounds in simultaneous adsorption and biodegradation processes

The role of bioregeneration process in renewing the adsorbent surface for further adsorption of organics during simultaneous adsorption and biodegradation processes has been well recognized. The extent of bioregeneration of powdered activated carbon (PAC) as an adsorbent loaded with phenol, p-methylphenol, p-ethylphenol and p-isopropylphenol, respectively, in the simultaneous adsorption and biodegradation processes were quantitatively determined using oxygen uptake as a measure of substrate consumption. Bioregeneration phenomenon was also evaluated in the simultaneous adsorption and biodegradation processes under sequencing batch reactor (SBR) operation to treat synthetic wastewater containing 1200 mg l(-1) phenol and p-methylphenol, respectively. The SBR systems were operated with FILL, REACT, SETTLE, DRAW and IDLE periods in the ratio of 4:6:1:0.75:0.25 for a cycle time of 12 h. The results show that the percentage of desorption from loaded PAC decreased in the order phenol>p-methylphenol>p-ethylphenol>p-isopropylphenol. For the treatment of phenol and p-methylphenol in the SBR reactors, respectively, the simultaneous adsorption and biodegradation processes were able to produce a consistent effluent quality of COD < or = 100 mg l(-1) when the applied PAC dosage was 0.115 and 0.143 g PAC per cycle, respectively. When no further PAC was added, the treatment performance deteriorated to that of the case without PAC addition after 68 and 48 cycles of SBR operation, respectively, for phenol and p-methylphenol. This observation is consistent with the greater extent of bioregeneration for phenol-loaded PAC as compared to p-methylphenol-loaded PAC.     

Adsorption characteristics of benzene on biosolid adsorbent and commercial activated carbons

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl2) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl2-immersed biosolids pyrolyzed at 500 degrees C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

水枝锦活性炭对孔雀石绿的吸附性能研究

以水枝锦为原料,采用磷酸活化法制备成水枝锦活性炭,通过静态实验研究其对孔雀石绿的吸附性能.考察了水枝锦活性炭投加量、接触时间、pH和孔雀石绿初始浓度对孔雀石绿吸附效果的影响.结果表明,在温度为723 K、活化时间为1 h条件下,水枝锦活性炭得率为36.7%,比表面积为1 223m2/g;在298K、孔雀石绿初始质量浓度为250mg/L、接触270min条件下,水枝锦活性炭的最佳投加量为0.5 g/L,适宜pH为7～12;吸附量随温度的升高而增大,提高温度有利于吸附的进行;水枝锦活性炭静态吸附孔雀石绿的动力学行为符合伪二级动力学方程.静态吸附动力学研究为投加粉状活性炭的吸附池的设计和污水处理装置的运行提供基础信息,对于去除水中孔雀石绿技术的应用具有重要的实际意义.     

黑曲霉死菌与活性炭对直接耐晒翠蓝FBL的吸附性能

采用批式实验,系统考察了黑曲霉死菌和活性炭的粉剂投加量,染料初始浓度,pH和反应时间对酞菁染料FBL脱色效果的影响;并采用扫描电镜图像,分析吸附剂的结构变化。结果表明,对于FBL染料的吸附处理,黑曲霉死菌粉剂与活性炭粉剂适宜的吸附条件为:酸性至弱碱性pH下,投加量为8 g/L;黑曲霉死菌粉剂比活性炭粉剂的吸附速度快、脱色性能高、抗染料浓度负荷冲击能力强。扫描电镜图像分析显示,黑曲霉死菌粉剂所具有的多层纤维结构为吸附染料分子提供较大的比表面。     

Removal and Destruction of Organic Contaminants in Water Using Adsorption,Steam Regeneration,and Photocatalytic Oxidation: A Pilot-Scale Study

ABSTRACT

The overall objective of this pilot-scale study is to investigate the technical feasibility of the removal and destruction of organic contaminants in water using adsorption and photocatalytic oxidation. The process consists of two consecutive operational steps: (1) removal of organic contaminants using fixed-bed adsorption; and (2) regeneration of spent adsorbent using photocatalysis or steam, followed by decontamination of steam condensate using photocatalysis. The pilot-scale study was conducted to evaluate these options at a water treatment plant in Wausau (Wisconsin) for treatment of groundwater contaminated with tetrachloroethene (PCE), trichloroethene (TCE), cis-dichloroethene (cis-DCE), toluene, ethylbenzene (EB), and xylenes. The adsorbents used were F-400 GAC and Ambersorb 563.

In the first treatment strategy, the adsorbents were impregnated with photocatalyst and used for the removal of aqueous organics. The spent adsorbents were then exposed to ultraviolet light to achieve photocatalytic regeneration. Regeneration of adsorbents using photocatalysis was observed to be not effective, probably because the impregnated photocatalyst was fouled by background organic matter present in the groundwater matrix.

In the second treatment strategy, the spent adsorbents were regenerated using steam, followed by cleanup of steam condensate using photocatalysis. Four cycles of adsorption and three cycles of steam regeneration were performed. Ambersorb 563 adsorbent was successfully regenerated using saturated steam at 160 °C within 20 hours. The steam condensate was treated using fixed-bed photo-catalysis using 1% Pt-TiO₂ photocatalyst supported on silica gel. After 35 minutes of empty bed contact time, more than 95% removal of TCE, cis-DCE, toluene, EB, and xylenes was achieved, and more than 75% removal of PCE was observed.

In the case of activated carbon adsorbent, steam regeneration was not effective, and a significant loss in adsorbent capacity was observed.     

污泥含炭吸附剂对挥发性有机废气吸附实验研究

研究了污泥含炭吸附剂对挥发性有机污染物的吸附特性。结果表明,污泥含炭吸附剂对苯系物的吸附为典型的物理吸附,其吸附甲苯等温线的类型系优惠型吸附等温线,表明具有良好的吸附能力;在吸附反应温度为20℃,气体流量为500 mL/m in(停留时间为0.424 s),甲苯浓度为2 700 mg/m3时,甲苯的饱和吸附容量为150.0 mg/g;同时,研究表明污泥含炭吸附剂对苯系物的饱和吸附容量和吸附强弱次序为二甲苯甲苯苯。结果表明污泥含炭吸附剂适合对中低浓度有机废气的吸附净化。     

Effects of water washing on removing organic residues in bottom ashes of municipal solid waste incinerators

Due to their potential toxicity and odourous nature, the residual organics in municipal solid waste incinerators are recently gaining attention as an important issue of resources recovery apart from their complex mixture of organic counterpart. Studies of the organic fractions in municipal solid waste incinerator residues have been limited. In this study, extended solid-phase extraction of the water-washed bottom ash and liquid-phase extraction of the washing water were carried out with regard to bottom ash samples from three mass-burning incinerators in Taipei County (Taiwan) during four consecutive seasons of year 2008-2009. Supercritical fluid extraction and Soxtec extraction techniques along with GC-MS were successfully used to characterize the residual organics in weathered and washed bottom ashes. Supercritical fluid extraction provided the quantification of aliphatics and aromatic compounds such as hexanoic acid and benzaldehyde, respectively. Soxtec extraction was useful for qualitative analysis of aromatic and aliphatic groups in the ashes and many of which were odourous and toxic compounds. By mixing one unit weight (g) bottom ash with two unit volume (mL) water for 15 min, total organic carbon in the bottom ash was greatly reduced (e.g., from 4.1 to 1.8 wt.%). Among the removed were foul odour-causing compounds such as pyridine and quinoline derivatives, while some aromatic compounds such as 4-hydroxybenzaldehyde and low-molecular-weight aliphatics such as hexanoic acid remained. The results here suggest that washing with water can be an effective pre-treatment step for removing odour-causing and environmental concerned organics.     

A high efficiency all glass sampling and concentration device for adsorptive semivolatile organics

A low-volume, inert sampling and enrichment device for semivolatile organic vapors is described. The device consists of two concentric fused silica capillaries. A small portion of the inter-capillary volume, cooled with a burst of compressed carbon dioxide, serves as a trap for the semivolatile organics. The low mass of the trap permits rapid sampling and desorption cycles suitable for applications requiring fast monitoring of semivolatile chemicals. The device is devoid of switching valves in the sampling train and consequently does not suffer from analyte loss due to irreversible adsorption or interference resulting from cross contamination. The device was successfully used for sampling low concentrations of highly adsorptive nitroaromatic compounds and is applicable for polychlorinated dibenzo-p-dioxins (PCDDs) and polyaromatic hydrocarbons (PAHs).     

An Evaluation of Emissions and Control Technologies for the Metal Decorating Process

A simple but effective sampling and analytical procedure is described for determining total organics, carbon dioxide, carbon monoxide, and methane emitted from web offset printing presses. Data are reported on a number of controlled and uncontrolled sources and emission levels are related to process variables such as press speed, ink coverage and dryer type. For controlled sources employing either catalytic or thermal incineration units, conversion efficiencies are reported as a function of temperature. Operational curves are presented for each control system studied indicating the dependency of carbon dioxide, NO_xt and organic output to incineration temperatures.     

失效锂离子电池材料真空热处理及氨性浸出

研究了失效锂离子电池中塑料、电极隔膜等有机物的真空脱除,并以电池级纯钴酸锂(LiCoO2)为原料,与活性炭粉混合,在真空中进行热还原,还原产物用含NH3和NH4HCO3的氨性水溶液浸出。实验结果表明,当加热温度大于450℃,真空压力<400 Pa时,失效锂离子电池中有机挥发物基本被脱除。在400℃真空温度下纯LiCoO2不被炭粉还原;当还原温度达到600℃,LiCoO2转变为CoO、Co和Li2CO3;在800℃时,还原产物主要为六方相、立方相金属钴及少量的CoO。还原产物中的钴易于被氨性水溶液浸出,浸出3 h后,钴基本进入溶液中,锂的浸出率也达到97%以上。     

Adsorption Characteristics of Benzene on Biosolid Adsorbent and Commercial Activated Carbons

Abstract

This study selected biosolids from a petrochemical waste-water treatment plant as the raw material. The sludge was immersed in 0.5-5 M of zinc chloride (ZnCl₂) solutions and pyrolyzed at different temperatures and times. Results indicated that the 1-M ZnCl₂-immersed biosolids pyrolyzed at 500 °C for 30 min could be reused and were optimal biosolid adsorbents for benzene adsorption. Pore volume distribution analysis indicated that the mesopore contributed more than the macropore and micropore in the biosolid adsorbent. The benzene adsorption capacity of the biosolid adsorbent was 65 and 55% of the G206 (granular-activated carbon) and BPL (coal-based activated carbon; Calgon, Carbon Corp.) activated carbons, respectively. Data from the adsorption and desorption cycles indicated that the benzene adsorption capacity of the biosolid adsorbent was insignificantly reduced compared with the first-run capacity of the adsorbent; therefore, the biosolid adsorbent could be reused as a commercial adsorbent, although its production cost is high.     

Chromium removal from water by activated carbon developed from waste rubber tires

Because of the continuous production of large amount of waste tires, the disposal of waste tires represents a major environmental issue throughout the world. This paper reports the utilization of waste tires (hard-to-dispose waste) as a precursor in the production of activated carbons (pollution-cleaning adsorbent). In the preparation of activated carbon (AC), waste rubber tire (WRT) was thermally treated and activated. The tire-derived activated carbon was characterized by means of scanning electron microscope, energy-dispersive X-ray spectroscopy, FTIR spectrophotometer, and X-ray diffraction. In the IR spectrum, a number of bands centred at about 3409, 2350, 1710, 1650, and 1300–1000 cm^?1 prove the present of hydroxyl and carboxyl groups on the surface of AC in addition to C═C double bonds. The developed AC was tested and evaluated as potential adsorbent removal of chromium (III). Experimental parameters, such as contact time, initial concentration, adsorbent dosage and pH were optimized. A rapid uptake of chromium ions was observed and the equilibrium is achieved in 1 h. It was also found that the adsorption process is pH dependent. This work adds to the global discussion of the cost-effective utilization of waste rubber tires for waste water treatment.     

空气中挥发性有机物监测技术的研究进展

讨论了空气中挥发性有机化合物（VOCs）的监测分析方法研究进展。重点介绍了空气中VOCs的采集、分析和测定；简要叙述了样品前处理的新方法--固相微萃取法（SPME）与其它前处理方法的研究概况。     

Xenobiotics removal by adsorption in the context of tertiary treatment: a mini review

Many xenobiotics, including several pharmaceuticals and pesticides, are poorly treated in domestic wastewater treatment plants. Adsorption processes, such as with activated carbons, could be a solution to curb their discharge into the aquatic environment. As adsorbent-like activated carbon is known to be expensive, identifying promising alternative adsorbent materials is a key challenge for efficient yet affordable xenobiotic removal from wastewaters. As part of the effort to address this challenge, we surveyed the literature on pharmaceutical and pesticide xenobiotics and built a database compiling data from 38 scientific publications covering 65 xenobiotics and 58 materials. Special focus was given to the relevance and comparability of the data to the characteristics of the adsorbent materials used and to the operating conditions of the batch tests inventoried. This paper gives an in-depth overview of the adsorption capacities of various adsorbents. The little data on alternative adsorbent materials, especially for the adsorption of pharmaceuticals, makes it difficult to single out any one activated carbon alternative capable of adsorbing pesticides and pharmaceuticals at the tertiary stage of treatment. There is a pressing need for further lab-scale experiments to investigate the tertiary treatment of discharged effluents. We conclude with recommendations on how future data should best be used and interpreted.