Ecological footprint analysis applied to a sub-national area: the case of the Province of Siena (Italy)

This work is part of a larger project, which aims at investigating the environmental sustainability of the Province of Siena and of its communes, by means of different indicators and methods of analysis. The research presented in this article uses ecological footprint and biocapacity as indicators to monitor the environmental conditions of the area of Siena, thus complementing previous studies carried out using Emergy, greenhouse gases balance and other methods. The calculations have been performed in such a way as to enable a disaggregation of the final results according to the classical categories of ecologically productive land and of consumption, but also according to citizen's and public administration's areas of influence. This information allows us to investigate in detail the socio-economic aspects of environmental resource use. Among the notable results, the Siena territory is characterized by a nearly breakeven total ecological balance, a result contrasting with the national average and most of the other Italian provinces. Furthermore, the analysis has been carried out at different spatial scales (province, districts and communes), highlighting an inhomogeneous territorial structure consisting of subareas in ecological deficit compensated by zones in ecological surplus.     

Integrating methods for the environmental sustainability: the SPIn-Eco Project in the Province of Siena (Italy)

This paper shows how different methods can be integrated in order to provide an organic evaluation of the environmental sustainability at the territorial level. A territory is a complex, dynamic and open system where a population develops, uses resources, produces goods and services, consumes, depletes and finally obtains economic results. All these elements characterise human behaviour, which can be monitored, measured and compared to the capacity of the environment to sustain it in the long run. The SPIn-Eco Project for the Province of Siena (Italy) is described as an example of an environmental sustainability assessment of an area, and its methods (Ecological Footprint, Greenhouse Gas Inventory, Extended Exergy Analysis, Emergy Evaluation, Life Cycle Assessment (LCA) and Remote Sensing) are briefly introduced. This Project has been proposed and funded by the most important provincial administrative and financial institutions in the territory (the Administration of the Province of Siena and the Monte dei Paschi Foundation, respectively), and was designed and realised in 4 years (2001-2004) by a research team coordinated by the University of Siena.     

Emergy accounting of the Province of Siena: towards a thermodynamic geography for regional studies

This research is part of the SPIn-Eco project for the Province of Siena, Italy, and applies an environmental accounting method to a region with reference to its population, human activities, natural cycles, infrastructures and other settings. This study asserts that the consumption of resources due to the human economy is a source of great concern because of the load it places on the biosphere. Environmental resources locally used, whether directly or indirectly, from both renewable energy fluxes and storage of materials and energies, are investigated. In this paper emergy analysis is presented and applied to the Province of Siena and to each of its municipalities, in order to evaluate the main flows of energy and materials that supply the territorial system, including human subsystems, with reference to their actual environmental cost. Therefore, the behaviour of the whole system and the interactions between natural and human agents were studied; in other words, the attitudes of the territorial systems toward resource use as revealed by their patterns of emergy consumption were observed. Once expressed in units of the same form of energy through the emergy evaluation, categories of resource consumption and systems of varying scales and organization are compared. Furthermore, indexes of environmental performance based on emergy are calculated. Flows of energy and materials are assessed, and their intensities, which vary throughout the area of the Province, are then visualized on maps.     

The ISO 14001 EMS Implementation Process and Its Implications: A Case Study of Central Japan

/ This study aims to investigate the ISO 14001 implementation process and its implications for regional environmental management. The region of Central Japan (known as Chubu in Japanese, which literally means center) was chosen for this case study. The study focuses on selected issues such as the: (1) trends and motives of private firms in the implementation of an ISO 14001-based environmental management system (EMS); (2) obstacles during system implementation; (3) role of the system in enhancing environmental performance within the certified organization; and (4) relation between the major stakeholders, local citizens, governments, and firms after adopting the system. To achieve these objectives, a questionnaire survey was mailed to all certified firms in the region. A 58% response was achieved overall. The results show that the main aims behind the adoption of ISO 14001 by firms in the Chubu region are to improve the environmental aspects within the enterprises and to enhance the employees' environmental awareness and capacity. The results have also shown that the ISO 14001-based EMS has had a great effect on a firm's environmental status as certified firms have claimed that natural resources such as fuel, water, and paper consumption have been more efficiently managed after adopting the system. Implementation of the system causes the firms to consider the role of the local people and the government in more effectively involving the local people in the firm's daily environmental activities. It also helps to enhance the environmental awareness among the local people. Adopting the system also promotes a better relation within the enterprises affiliated to the same group, such as more attention given by the parent firms (head offices) towards other firms working for the same group, or branches-mainly small and medium sized enterprises (SMEs)-in the field of EMS. Finally, the results show that firms give serious consideration to their final products' impacts on the environment. In other words, attention is given to life cycle analysis (LCA) among certified firms.     

The impact of ISO 14001 on corporate environmental performance: a study of Swedish manufacturing firms

The debate concerning the environmental effectiveness of environmental management systems (EMS) based on ISO 14001 is still open and scholars have called for further studies that can explain the contrasting evidence in previous research. As a response, this study aims to contribute knowledge about the effects of ISO 14001-based EMS by presenting fact-based environmental data. The study focuses on changes in performance over a period of 12 years and includes both firms with an EMS (66 firms) and firms without one (50 firms). Consideration is given to the improvement efforts in the firms before EMS adoption making it possible to neutralize any selection effects where better environmental performance precedes ISO 14001 adoption. Analysis has been carried out using statistical methods for six different environmental areas. No statistically significant differences between certified and non-certified firms concerning the change in the rate of improvement could be found in any of the six areas. However, it can be suspected that EMS adoption has positive effects on energy use and waste production whereas the non-adopting firms seem to perform better concerning air emissions. These mixed results mirrors previous research, which is rather worrying considering the worldwide popularity of EMS based on ISO 14001 in industry.     

Are EMS environmentally effective? The link between environmental management systems and environmental performance in European companies

Based on the analysis of a large dataset on the environmental performance of European companies in five industrial sectors, this paper examines the question of whether the presence of an environmental management system (EMS) has a positive impact on the eco-efficiency of companies. It begins with a review of evidence about the link between EMS and environmental performance in business organisations, finding that, despite much research, there is still little quantitative evidence. The second part of the paper uses three independent statistical methods (simple correlations, Jaggi-Freedman indices and a ‘trend differences’ approach) to assess whether companies and production sites with EMS perform better than those without and whether performance improves after an EMS has been introduced. The paper shows that there is currently no evidence that EMS have a consistent and significant positive impact on environmental performance. Policy action based on the simple assumption that companies with an EMS perform better than those without therefore seems inappropriate.     

A Case-study of ISO 14001-based Environmental Management System Implementation in the People's Republic of China

The ISO 14001 implementation process among certified firms in China was examined by conducting a questionnaire survey distributed to all certified firms as of December 1998. Results showed that the ISO 14001-based environmental management system (EMS) has a significant effect on firms' daily environmental activities and performance. Recycling, natural resource consumption and released pollutants have been managed in a better way and, in some cases, pollutants have been reduced. The study showed that firms' main targets for adopting the system were to: enhance the firm's public image; enhance employees' environmental awareness; improve the EMS inside the firm; improve the environmental aspects and performance inside the firm; and improve relations with government offices and local citizens. ISO 1400-based EMS implementation showed that it is a promising tool for helping build a better partnership between three main stakeholders, government, local citizens and enterprises. The system has enabled firms to consider the role of the local people in a more effective way. For example, special consideration is given to involving local citizens in health and emergency preparedness during firms' daily environmental activities. Moreover, enhancing environmental awareness among the local citizens and giving more consideration to co-operation with other firms from the same industrial groups are reported by certified firms. Finally, there are strong demands for government support to build more reliable information systems, ISO 14001-related research, more incentives for eco-labelling and tax exemptions.     

Adaptive environmental management of tourism in the Province of Siena, Italy using the ecological footprint

Adaptive management as applied to tourism policy treats management policies as experiments that probe the responses of the system as human behavior changes. We present a conceptual systems model that incorporates the gap between observed and desired levels of the ecological footprint with respect to biocapacity. Addressing this gap (or 'overshoot') can inform strategies to increase or decrease visitation or its associated consumption in the coming years. The feedback mechanism in this conceptual model incorporates a gap between observed and desired ecological footprint levels of tourists and residents. The work is based on longer-term and ongoing study of tourism impacts and ecological footprint assessments from the SPIN-Eco Project. We present historical tourism and environmental data from the province of Siena, Italy and discuss the use of discrete, static environmental indicators as part of an iterative feedback process to manage tourism within biophysical limits. We discuss a necessary shift of emphasis from certain and static numbers to a process-based management model that can reflect slow changes to biophysical resources. As underscored by ecological footprint analysis, the energy and material use associated with tourism and local activity can erode natural capital foundations if that use exceeds the area's biological capacity to support it. The dynamic, and iterative process of using such indicators as management feedback allows us to view sustainability more accurately as a transition and journey, rather than a static destination to which management must arrive.     

A Case-study of ISO 14001-based Environmental Management System Implementation in the People's Republic of China

The ISO 14001 implementation process among certified firms in China was examined by conducting a questionnaire survey distributed to all certified firms as of December 1998. Results showed that the ISO 14001-based environmental management system (EMS) has a significant effect on firms' daily environmental activities and performance. Recycling, natural resource consumption and released pollutants have been managed in a better way and, in some cases, pollutants have been reduced. The study showed that firms' main targets for adopting the system were to: enhance the firm's public image; enhance employees' environmental awareness; improve the EMS inside the firm; improve the environmental aspects and performance inside the firm; and improve relations with government offices and local citizens. ISO 1400-based EMS implementation showed that it is a promising tool for helping build a better partnership between three main stakeholders, government, local citizens and enterprises. The system has enabled firms to consider the role of the local people in a more effective way. For example, special consideration is given to involving local citizens in health and emergency preparedness during firms' daily environmental activities. Moreover, enhancing environmental awareness among the local citizens and giving more consideration to co-operation with other firms from the same industrial groups are reported by certified firms. Finally, there are strong demands for government support to build more reliable information systems, ISO 14001-related research, more incentives for eco-labelling and tax exemptions.     

Performance of newly implemented Environmental Management Systems in primary schools in South Africa

Quantitative results from Environmental Management Systems (EMS) at primary schools have rarely been examined in literature. This paper presents the monitoring results of environmental care in 39 primary schools in Northern South Africa. During 2 years, after the EMS was implemented in the curriculum and in the school's management, the progress of environmental performances of the participating schools has been measured, by means of detailed questionnaires, related to four environmental aspects: water, waste, energy and greening. At the beginning of the project, 50% of the schools performed well on water-related environmental actions. Two years later it was 76%. For waste-related activities the improvement was even stronger: from 50% to 100%. The environmental performances of the schools improved also for greening-related actions, from 50% at the start of the project to 64% two years later. Only energy-related activities did not improve significantly with only 24% of all schools performing well at the end of the survey period.In general, the introduction of an EMS succeeded in an improvement of the overall environmental performances of the schools, but cost-intensive activities were less successful than others.     

The influence of motivations for seeking ISO 14001 certification: an empirical study of ISO 14001 certified facilities in Hong Kong

This study proposes a model linking firm motivations for seeking ISO 14001 certification to the effectiveness of three major components of an environmental management system (EMS)--environmental policy, the assessment of environmental aspect and impacts, and management review. The relationship of these EMS components with a self-reported measure of environmental performance is also examined. From a sample of 29 ISO 14001 certified facilities in Hong Kong (of 71 total certifications at the time the data was collected), it was found that motivations to enhance firm reputation are positively related to perceptions of the effectiveness of the policy statement. Motivations for reputation enhancement and cost reduction were positively related to perceptions of EMS effectiveness in assessing environmental aspects and impacts. The effectiveness of the methodology for identifying environmental aspects and impacts was also found to be positively related to improved environmental performance.     

Evaluation of environmental management resources (ISO 14001) at civil engineering construction worksites: a case study of the community of Madrid

In recent years, significant advances have been made in business organization and management. The growing demands of clients as well as the globalization of world markets are among the many factors that have led to the establishment of systems of quality control and environmental management as a competitive strategy for businesses. When compared to other professional sectors, the construction sector has been slower to respond to environmental problems and to adopt Environmental Management Systems (EMS). In the world today the ISO 14001 standard is currently the main frame of reference used by construction companies to implement this type of management system. This article presents the results of a general study regarding the evaluation of the application of the ISO 14001 standard at civil engineering construction worksites in the Community of Madrid (Spain), specifically pertaining to requirement 4.4.1, Resources, roles, responsibilities, and authority. According to requirement 4.4.1, company executives should appoint people responsible for implementing the EMS and also specify their responsibilities and functions. The personnel designated for supervising environmental work should also have sufficient authority to establish and maintain the EMS. The results obtained were the following: - EMS supervisors did not generally possess adequate training and solid experience in construction work and in the environment. Furthermore, supervisors were usually forced to combine their environmental work with other tasks, which made their job even more difficult. - Generally speaking, supervisors were not given sufficient authority and autonomy because productivity at the construction site had priority over environmental management. This was due to the fact that the company management did not have a respectful attitude toward the environment, nor was the management actively involved in the establishment of the EMS. - Insufficient resources were allocated to the Environmental Management Unit. As a result, the application of EMSs in construction projects often appeared to be more of a formality, which was merely a way of maintaining the certification of the Environmental Management System. It was more a means of meeting the requirements for submitting a tender to contracting organisms rather than an indicator of any real commitment to improving the environmental performance of construction companies.     

Toward Environmental Management Systems in Australian Agriculture to Achieve Better Environmental Outcomes at the Catchment Scale

Environmental Management Systems (EMS) are being trialed for Australian agricultural industries as society becomes more concerned about agricultures environmental performance. EMS is a structured approach used by farm businesses to assess, monitor, and improve environmental performance. Use of EMS in conjunction with other policy tools (such as financial incentives and regulation) in agriculture could enhance management of both on-farm and off-farm environmental issues. Based on the international standard ISO14001, EMS was designed to be applied at the individual business level. However, governments in Australia are exploring its potential to be applied at a catchment scale, among other things, for the purpose of linking farm-level actions to catchment targets. In Australia, governments and catchment management bodies are using Integrated Catchment Management (ICM) as the framework to try to achieve environmental targets set out in catchment plans. In this article, we compare aspects of the EMS and ICM frameworks and comment on the potential of using EMS to achieve catchment-scale environmental outcomes. We conclude that EMS could be a useful policy tool to improve farm management and to contribute, in part, to better off-site outcomes at the catchment/landscape scale. Recommendations on the use of EMS at the catchment scale are discussed. These include using an educational approach for EMS delivery, linking the EMS process to catchment targets, and ensuring catchment targets are realistic and achievable.     

Satellite-based indices in the analysis of land cover for municipalities in the province of Siena, Italy

Territorial indicators based on the satellite measured reflected or emitted energy can provide valuable information on the spatial evolution of a territory. Information regarding land use, biomass coverage and radiant temperature were obtained from remotely obtained measurements for each municipality in the Province of Siena. Remotely sensed data were combined into different indices to compare characteristics of land cover between territories and create an information base for continued study. A classification was performed on a municipal level and land use classes were grouped together and a general index of use pressure was created. A vegetation index was used to compare biomass densities. A radiant temperature index was calculated using measure thermal infrared emissions. The results of these analyses allowed researchers to examine the intra and inter-municipal spatial heterogeneity within the Province. A comparison between the results of each index was made and the problems related to the use of such indices were examined.     

中国大型发电上市公司ESG评价体系开发与分值研究

如今,世界各地上市公司正将利润最大化这一短期目标转向环境、社会及管治(ESG)可持续发展这一长期目标,更加清楚地认识到ESG已经构成了企业风险的重要来源之一,并可能影响公司的财务绩效。本文基于状态、压力、响应与层次分析(PSR-AHP)指标分类与权重配比方法构建中国大型发电上市公司ESG评级体系,并应用该评价体系对中国大型发电上市公司ESG绩效进行研究。结果发现,其ESG综合得分波动性大,在研究期最后两年走势不甚理想,其中社会绩效得分及其趋势表现优于环境及管治绩效;在环境及社会绩效方面,响应性指标表现优于压力性指标,而状态性指标走势较为稳定。最后,本文从披露深度及质量、第三方介入、奖惩及强制性披露措施等方面给出政策建议。     

Importance of information on tillage practices in the modelling of environmental processes and in the use of environmental indicators

Tillage has been and will always be integral to crop production. Tillage can result in the degradation of soil, water, and air quality. Of all farm management practices, tillage may have the greatest impact on the environment. A wide variety of tillage equipment, practices and systems are available to farmers, providing opportunities to enhance environmental performance. These opportunities have made tillage a popular focus of environmental policies and programs such as environmental indicators for agriculture. This paper provides a very brief examination of the role of tillage in crop production, its effect on biophysical processes and, therefore, its impact on the environment. Models of biophysical processes are briefly examined to demonstrate the importance of tillage relative to other farm management practices and to demonstrate the detail of tillage data that these models can demand. The focus of this paper is an examination of the use of information on tillage in Canada's agri-environmental indicators initiative, National Agri-environmental Health Analysis and Reporting Program (NAHARP). Information on tillage is required for several of the indicators in NAHARP. The type of data used, its source, and its quality are discussed. Recommendations regarding the collection of tillage data and use of tillage information are presented.     

Towards a Sustainable Urban Environmental Management Approach (SUEMA): Incorporating environmental management with Strategic Environmental Assessment (SEA)

An Environmental Management System (EMS) has been widely in use by many companies to manage the environmental effects of their operations. The process has recently gained ground in being adopted at city and municipal levels as well as in institutions such as universities. However, an EMS that is conducted at corporate level has some deficiencies when it is applied at city level. These deficiencies are in evaluating environmental goals and policies carried out to mainly ensure that the policies meet ISO 14001 standard and corporate requirements and neglect of public participation. Urban areas differ from companies due to their size, complexity and environmental challenges, high rate of growth and the dynamic nature of urban systems. Therefore, they need an urban environmental management approach that will assess the formulated urban environment policies and goals in a strategic method before implementation, including social dimensions such as public participation. Therefore, this paper proposes a modified approach to incorporate an EMS, called the Sustainable Urban Environmental Management Approach (SUEMA). The approach recognizes the above-mentioned deficiencies and benefits from the advantages of sustainability and Strategic Environmental Assessment (SEA) in the formulation and evaluation of policies, plans and programs. SUEMA is developed to ensure more sustainable urban environmental planning and development.     

Factors Influencing ISO 14000 Implementation in Printed Circuit Board Manufacturing Industry in Hong Kong

The worldwide trend of environmentalconcern has been driving manufacturers to strive to implement competitive strategies in environmental management.A study has been carried out to evaluate the initiatives and benefits/costs of implementing ISO 14000 Environmental Management System (EMS) standard (1996) in the Hong Kong PCB (printed circuit board) industry. The study found that manufacturers intended to implement the ISO 14000 based EMS to improve their environmental performance, and sustain their competitive position in the global market place.     

Expanding the benefits of environmental management systems through DFE

Industry's role in environmental protection is changing and growing. Increasing evidence shows that a corporation's understanding and response to environmental issues and concerns can have strategically important consequences for some kinds of businesses.¹ Focusing on concepts of prevention, industry has developed and struggled with a number of environmental approaches, all of which attempt to link the environment with common business practice. Industry has followed and in some cases embraced concepts and approaches like sustainable development, eco-efficiency, green manufacturing, pollution prevention, and extended product responsibility. A particularly timely and promising strategy to reduce the environmental impact of both manufacturing and product use while enhancing business success is the integration of environmental management systems (EMS) with design for the environment (DFE) efforts. A desirable relationship can and should exist between DFE and EMS. This relationship has not been well understood, but is crucial to fulfill the promise of each. In application, the institutionalization of DFE in an organization is difficult and tenuous at best. Some authors suggest that management issues block the implementation of DFE.² Others say that DFE has not been institutionalized to the extent that pollution prevention has.³ This article suggests that through an explicit connection between an EMS and DFE, DFE can extend the promise of EMS to reduce industry's environmental impact and produce business success, and it can do so in an ongoing way. The authors will show the importance of an EMS/DFE linkage, suggest company types that might benefit from investigating these approaches, and then review a series of DFE tool types.