Properties and biodegradability of chain-extended copoly(succinic anhydride/ethylene oxide)

Chain-extension reactions were carried out using titanium-iso-propoxide (TIP) as a catalyst for a series of polyesters or copolyesterethers with low molecular weights (M _n =1500–10,000) synthesized by the ring-opening copolymerization of succinic anhydride (SA) with ethylene oxide (EO). The copolymers having aM _n from 25,000 to 50,000 of different properties were obtained. Both the melting point (T _m ) and the fusion heat (H), which indicate the crystallinity of the copolymers, rose with an increase in SA content in the copolymers. Semitransparent films were prepared by compression molding of the copolymers. The biodegradation of the copolymer films was evaluated by enzymatic hydrolysis by lipases and by an aerobic gas evolution test in standard activated sludge. The hydrolyzability of these copolymers by three kinds of lipases was affected by their copolymer composition SA/EO, form, andM _n . The copolyesterether (SA/EO=43/57,M _n =48,900) was more easily biodegraded by standard activated sludge compared to the polyester (SA/EO=47/53,M _n =36,300).Presented at the Pacifichem-95, December 17–22, 1995, Honolulu, Hawaii.     

Electrocoagulation of some reactive dyes: a statistical investigation of some electrochemical variables

In this study, the decolorization of strong colored solutions containing the reactive textile dyes by electrocoagulation was investigated. The experiments were statistically designed and carried out according to a 2(4) full factorial design with two replicate and four center points. This design was extended with eight additional axial points. Then, the non-linear regression was applied on the data by using MINITAB software. The variables chosen for this work are mixing rate, cell voltage, electrolysis time and current density. Results showed that the effective variables on decolorization process are cell voltage, electrolysis time and current density. In addition, to determine the effect of dye and electrode type on decolorization, the additional experiments were carried out. It was determined the dye and electrode type are important on the decolorization process.     

Synthesis of a block copolymer of poly(3-hydroxybutyrate) and poly(ethylene glycol) and its application to biodegradable polymer blends

A block copolymer {P[(R,S)-HB-b-EG]} of atactic poly[(R,S)-3-hydroxybutyrate] {P[(R,S)-HB]} and poly(ethylene glycol) (PEG) was prepared by the ring-opening polymerization of -butyrolactone in the presence of a macroinitiator (PEG/ZnEt₂/H₂O) which had been produced by the reaction of ,-dihydroxy PEG ( _n=3000) with ZnEt₂/H₂O (1/0.6) catalyst. The block copolymer ( _n=10,500, _w/ _n=1.2) was an A-B-A triblock copolymer comprising atactic P[(R,S)-HB] (A) and PEG (B) segments. The miscibility, physical properties, and biodegradability of binary blends of microbial poly[(R)-3-hydroxybutyrate] {P[(R)-HB]} with the block copolymer P[(R,S)-HB-b-EG] has been studied. The glass-transition temperature (T _g) data showed that the P[(R)-HB]/P[(R,S)-HB-b-EG] blend was miscible in the amorphous state. The P[(R)-HB] film became flexible and tough by means of blending with P[(R,S)-HB-b-EG] block copolymer. The enzymatic degradation of blend films was carried out at 37°C and pH 7.4 in a 0.1M phosphate solution of an extracellular PHB depolymerase fromAlcaligenes faecalis. The enzymatic degradation took place solely on the surface of the blend films.     

Infrared and nuclear magnetic resonance evidence of degradation in thermoplastics based on forest products

The degradation of lignin-(1-phenylethylene) graft copolymers (lignin-styrene graft copolymers) by white rot basidiomycete fungi was followed by monitoring aromatic absorption bands by Fourier transform infrared (FTIR) spectroscopy and nuclear magnetic resonance (NMR) spectroscopy. The FTIR of the graft copolymers shows a series of characteristic absorbance peaks from multi-substituted aromatic rings and a strong poly(1-phenylethylene) (polystyrene) absorbance peak from monosubstituted aromatic rings. Subtraction of copolymer spectra taken before incubation from spectra taken after 50 days of incubation with the four tested fungi shows the loss of functional groups from the copolymer. NMR spectra also show reduction of aromatic ring resonances from the copolymer and incorporation of peaks from fungi as a result of incubation with fungi. The biodegradation tests were run on lignin-(1-phenylethylene) graft copolymers which contained 10.3, 32.2, and 50.4% of lignin. The polymer samples were incubated with the white rot fungiPleurotus ostreatus, Phanerochaete chrysosporium, andTrametes versicolor, and the brown rot fungusGleophyllum trabeum. White rot fungi degraded the plastic samples at a rate that increased with increasing lignin content in the copolymer sample. Both poly(1-phenylethylene) and lignin components of the copolymer were readily degraded. Observation by scanning electron microscopy of incubated copolymers showed a deterioration of the plastic surface. The brown rot fungus did not affect any of these plastics, nor did any of the fungi degrade pure poly(1-phenylethylene).Paper presented at the Bio/Environmentally Degradable Polymer Society—Second National Meeting, August 19–21, 1993, Chicago, Illinois.     

稀土元素Pr辅助的类Fenton试剂氧化法处理染料废水

以靛蓝为目标污染物,采用稀土元素Pr辅助的类Fenton试剂氧化法处理模拟染料废水。制备了双金属氧化物催化剂Fe_2-xPr_xO₃,考察了催化剂中n（Pr）∶n（Fe）、催化剂加入量、初始靛蓝质量浓度、H₂O₂加入量、废水pH对废水脱色效果的影响。实验结果表明：Pr在很大程度上提高了类Fenton反应的效率,废水脱色率得到显著提高;在n（Pr）∶n（Fe）=1∶5、初始靛蓝质量浓度为30 mg/L、催化剂加入量为500 mg/L、H₂O₂加入量为40 mL/L、废水pH为3的最佳工艺条件下,反应50 min时废水脱色率达到92.78%。     

包覆型纳米零价铁的制备及其对染料溶液的脱色性能

采用一步法合成了SiO_2包覆型纳米零价铁(SiO_2-NZVI),并采用TEM,XRD,FTIR及EDS方法对其进行了表征,考察了SiO_2-NZVI对偶氮、蒽醌、三苯甲烷3种不同类型的染料溶液的脱色能力。表征结果表明:SiO_2-NZVI平均粒径为15~22 nm,SiO_2薄膜厚度均一,约为10 nm;SiO_2-NZVI中所含元素主要为Fe和Si,质量比为90.6∶9.4。实验结果表明:SiO_2-NZVI对3种染料溶液均具有脱色能力,在染料溶液质量浓度为100 mg/L、SiO_2-NZVI加入量为2 g/L、反应时间为35 min的条件下,对甲基橙、孔雀石绿、洋红溶液的脱色率分别为86.04%,97.50%,82.13%;SiO_2-NZVI相对于NZVI有更强的抗氧化能力,且酸性环境有利于SiO_2-NZVI对染料溶液的脱色。     

Synthesis and biodegradation of poly(γ-butyrolactone-co-l-lactide)

Biodegradable polyesters were synthesized by ring-opening copolymerization of -butyrolactone (BL) and its derivatives withl-lactide (LLA). Although tetraphenyl tin was the main catalyst used, other organometallic catalysts were used as well.¹H and¹³C NMR spectra showed that poly(BL-co-LLA)s were statistical and that their number-average molecular weights were as high as 7×10⁴. The maximum BL content obtained from copolymerization BL/LLA was around 17%. TheT _m andT _g values of the copolymers showed a gradual depression with an increase in BL content. NoT _m was obtained for the copolymers containing more than 13 mol% BL. The biodegradability of the copolyesters was evaluated by enzymatic hydrolysis and nonenzymatic hydrolysis tests. The enzymatic hydrolysis was carried out at 37°C for 24 h using lipases fromRhizopus arrhizus andR. delemar. Hydrolyses by both lipases showed that an increase in BL content of the copolymer resulted in enhanced biodegradability. Nonenzymatic accelerated hydrolysis of copolymers at 70°C was found to increase proportionally to their exposure time. The hydrolysis rate of these copolymers was considerably faster than that of PLLA. The higher hydrolyzability was recorded for the BL-rich copolymers. The copolymerization of -methyl--butyrolactone (MBL) or -ethyl--butyrolactone (EBL) with LLA resulted in relatively LA-rich copolymers.     

Poly(Lactic Acid)-co-Aspartic Acid Copolymers: Possible Utilization in Drug Delivery Systems

The synthesis and characterization of poly(lactic acid)-co-aspartic acid copolymers (PLA-co-Asp) were presented. Subsequently, the synthesized PLA-co-Asp copolymers were tested as biodegradable carriers in drug delivery systems. PLA-co-Asp copolymers were synthesized by solution polycondensation procedure, using different molar ratios PLA/l-aspartic acid (2.33/1, 1/1, 1/2.33), manganese acetate and phosphoric acid as catalysts and N,N′-dimethyl formamide (DMF)/toluene as solvent mixture. The copolymers were characterized by FT-IR and ¹H-NMR spectroscopy, gel permeation chromatography (GPC), DSC and TG-DTG analyses. Diclofenac sodium, a non steroidal anti-inflammatory drug was subsequently loaded into PLA-co-Asp copolymers. The in vitro drug release experiments were done by dialysis of the copolymer/drug systems, in phosphate buffer solution (pH = 7.4, at 37 °C) and monitored by UV spectroscopy.     

无机-有机复合絮凝剂PACSAM的制备及其脱色性能

以聚合氯化铝（PAC）和淀粉-丙烯酰胺接枝聚合物（ST-AM）为原料,合成了一种新型的无机-有机复合絮凝剂（PACSAM）。考察了PACSAM对活性染料、直接染料模拟印染废水及实际印染废水的脱色效果,并初步探讨了絮凝机理。实验结果表明：在很宽的pH范围内,PACSAM均表现出了良好的脱色性能;在PACSAM加入量为25m g/L时,PACSAM对实际印染废水的脱色率、COD去除率、浊度去除率分别为96.4%,92.1%,98.5%,废水处理效果明显好于壳聚糖和PAC。PACSAM的絮凝机理包括化学反应、分子间氢键、电中和及架桥作用等。     

Biocompatible Polyurethane Scaffolds Prepared from Glycerol Monostearate-Derived Polyester Polyol

Biodegradable polyester polyol was synthesized from oleochemical glycerol monostearate (GMS) and glutaric acid under a non-catalyzed and solvent-free polycondensation method. The chemical structure of GMS-derived polyester polyol (GPP) was elucidated by FTIR, ¹H and ¹³C NMR, and molecular weight of GPP was characterized by GPC. The synthesized GPP with acid value of 3.03 mg KOH/g sample, hydroxyl value of 115.72 mg KOH/g sample and M_n of 1345 g/mol was incorporated with polyethylene glycol (PEG) and polycaprolactone diol (PCL diol) to produce a water-blown porous polyurethane system via one-shot foaming method. The polyurethanes were optimized by evaluating glycerol as a crosslinker, silicone surfactant and water blowing agent on tensile properties of polyurethanes. All polyurethanes underwent structural change, and crystalline hard segments of polyurethanes were shifted to higher temperature suggested that hard segments undergone re-ordering process during enzymatic treatment. In terms of biocompatibility, polyurethane scaffold produced by reacting 100% w/w of GPP with isophorone diisocyanate and additives showed the highest cells viability of 3T3 mouse fibroblast (94%, day 1), and MG63 human osteosarcoma (107%, day 1) and better cell adhesion as compared to reference polyurethane produced by only PEG and PCL diol (3T3 cell viability: 8%; MG63 cell viability: 2%). The current work demonstrated GPP synthesized from renewable and environmental friendly resources produced polyurethanes that allows improvement in physico-chemical, mechanical and biocompatibility properties. By blending with increasing content of GPP, the water-blown porous polyurethane scaffold has shown great potential as biomaterial for soft and hard tissue engineering.     

Novel Environmentally Friendly Copolymers Carboxymethyl Starch Grafted Poly(Lactic Acid)

Modified natural polymers have been gaining increasing scientific interest for many years. In this study carboxymethyl starch (CMS) was grafted with L(+)-lactic acid (LA) in different molar ratios CMS/LA (1/36, 1/22 and 1/12), resulting carboxymethyl starch-g-poly(lactic acid) (CMS-g-PLA) copolymers. The grafting reaction was carried out by solution polycondensation procedure in toluene and stannous 2-ethyl hexanoate Sn(Oct)₂ as catalyst was utilized. Poly(lactic acid) (PLA) was synthesized in the same conditions with the copolymers for comparative analyses of the physico-chemical and thermal properties. The copolymers and PLA were structurally and morphologically characterized by FT-IR, ¹H-NMR spectroscopy, WAXD and SEM analyses, taking CMS as reference. The molecular weight of the copolymers, CMS and PLA were determined, using a dynamic light scattering technique. The thermal behavior of the products was studied by DSC and TG-DTG analyses. The CMS-g-PLA graft copolymers exhibited lower Tg and thermal stability than pure CMS.     

染料废水的脱色方法

综述了染料废水的污染特征和混凝,电解、氧化、吸附、生物降解等各种脱色方法,分析了相应的脱色机理,并介绍了染料废水的组合处理方法。     

Synthesis and Properties of Poly(d,l-lactide-co-p-dioxanone) Random and Segmented Copolymers

Two different polymerization routes, one-step and two-step bulk ring-opening polymerizations of d,l-lactide (LA) and p-dioxanone (PDO) monermers using stannous octoate [Sn(Oct)₂]/n-dodecanol as the initiating system, were employed to synthesize poly(d,l-lactide-co-p-dioxanone) P(LA-co-PDO) random and segmented copolymers with different compositions and chain microstructure. For the two-step copolymers, the average sequence lengths of the lactidyl (L_LA) and dioxanyl (L_PDO) units calculated from the ¹H-NMR spectra were much longer than those values for the one-step copolymers with the same LA/PDO feed ratio. Corresponding to this difference in microstructure, the two-step copolymers were semi-crystalline even when the PDO content was as low as 14.5 mol%, while the one-step copolymers were completely amorphous with PDO content below 60.6 mol%. However, irrespective of polymerization route, both types of copolymers displayed a single glass transition temperature that was in a linear relation with composition. The decrease of maximum decomposition temperature of the copolymers was in accordance with the decrease of L_PDO value. The mechanical and degradation properties of the copolymers were significantly affected by both the polymerization route and the chemical composition as well. In conclusion, the properties of P(LA-co-PDO) copolymers could be adjusted conveniently to meet specific applications by changing the composition and microstructure of the copolymers via different polymerization routes.     

Characterization of EVA/PLA Blends When Exposed to Different Environments

EVA/PLA blends compatibilized with EVA-g-PLA grafted copolymers synthesized by reactive extrusion, through transesterification reaction between ethylene-vinyl-acetate (EVA) and polylactide (PLA) using titanium propoxide (Ti(OPr)₄) as catalyst, were characterized when exposed to different environments. Stability to UV radiation was assessed exposing the samples to a Xenon lamp, which simulates the sun UV spectrum and the biodegradability was evaluated by biochemical oxygen demand (BOD) in a closed respirometer. Exposed samples were removed periodically and analyzed by several analytical techniques, such as, FTIR, DSC, rheology and tensile tests. The results obtained evidenced that UV radiation induces structural modifications, which affect substantially rheological and mechanical properties. Moreover, the blend with higher amount of copolymer exhibits lower photo durability and greater biodegradability. From the environmental point of view, these new materials are very promising for application with short lifetime, like packaging.     

新生二氧化锰吸附法去除水中直接大红染料

研究了影响新生MnO2对直接大红4B染料废水脱附脱色的有关因素，结果表明，pH是影响脱色效果的关键因素，吸附脱色存在佳化pH范围，其上限随染料浓度的提高和MnO2投加量的增加而增大。投加0．3g/L的MnO2可使染料废水的脱色率达到98．2％，升高温度可提高脱色率。     

Compatible Blends of Zein and Polyvinylpyrrolidone

Blends of zein and polyvinylpyrrolidone (PVP) were compared based on their tensile properties, thermal properties and morphology. Zein was blended with polyvinylpyrrolidone of varying molecular weights (10, 55, and 1,300 kDa) and films were cast from ethanol solutions. Films cast using the higher molecular weight polymers showed an improvement in tensile strength, up to a 24% increase, compared to control. Differential scanning calorimetry data for the blends showed single T_m and T_g values of an intermediate value between those of zein and PVP control samples. Field emission scanning electron microscopy images show no obvious inhomogeneities, and confocal fluorescence microscopy showed no decreased uniformity in the PVP/zein films compared to control. Electrospun fibers of the zein/PVP blends were also obtained. These findings suggest that zein and polyvinylpyrrolidone combine to form a compatible blend, the first such blend of zein with a synthetic polymer.     

Synthesis, Characterization, and Hydrolytic Degradation of Copolymers of 2-Methylene-1,3-dioxepane with Ethylene and with Styrene

2-Methylene-1,3-dioxepane (MDP) was copolymerized with ethylene (E) at a pressure of approximately 1000 psi and a temperature of approximately 70°C with AIBN as the free radical initiator. The copolymers obtained, poly(MDP-co-E), were characterized by elemental analysis, IR, ¹H-NMR and ¹³C-NMR spectroscopy, DSC, and GPC. The copolymers contained 2–15 mol% ester units. MDP was also copolymerized with styrene (S) at 120°C with di-t-butyl peroxide as the initiator to prepare the copolymer, poly(MDP-co-S). The number-average molecular weights of both types of copolymers were in the range of 6000 to 11,000, and the weight-average molecular weights were in the range of 9000 to 17,000. The melting temperatures of poly(MDP-co-E) decreased with increasing ester unit content in the copolymer. For the MDP-S copolymers, the glass transition temperatures decreased with increasing ester unit content. Both poly(MDP-co-E) and poly(MDP-co-S) were degraded by methanolysis, and their molecular weights decreased by the expected amounts based on the ester unit content.     

The Relationship Between the Chemical Structure of Poly(alkylene glycol)s and Their Aerobic Biodegradability in an Aqueous Environment

The relationship between the chemical structure of poly(alkylene glycol)s (PAGs) and their biodegradability was studied using a set of polymeric fluids that included poly(ethylene glycol), poly(propylene glycol) (PPG), random copolymers of ethylene oxide (EO) and propylene oxide (PO) differing in the EO/PO ratio as well as PAGs capped with ether or acyl moieties. The PAGs that were tested had an average molecular weight (MW) in the range of 350–3,600 Da and differed in their polymer backbones by either linear (diol type) or branched (triol type) molecules. The ultimate biodegradability of the PAGs was determined according to ISO 14593 (CO₂ headspace test) with a non-pre-exposed (as in OECD 310 test) and pre-exposed (adapted) inoculum. PAGs with the structure of PPG and copolymers of EO/PO of diol or triol structures with average molecular weights lower than 1,000 Da can be considered as readily biodegradable. Their ultimate biodegradation exceeds the limit of 60 % (according to the criteria of the OECD 310 test). PAGs with a copolymer structure and MW values ranging between 1,000 and 3,600 Da are not readily biodegradable, but they can be considered as those of inherent ultimate biodegradability. The increased EO content in PAG structures and the acylation of the terminal hydroxyl groups with carboxylic acids favourably influenced their biodegradability. Capped PAGs containing terminal ether groups appeared to be resistant to biodegradation.     

A Novel Biodegradable Green Poly(l-Aspartic Acid-Citric Acid) Copolymer for Antimicrobial Applications

Poly (l-aspartic acid-citric acid) green copolymers were developed using thermal polymerization of aspartic acid (ASP) and citric acid (CA) followed by direct bulk melt condensation technique. Antibacterial properties of copolymer of aspartic acid based were investigated as a function of citric acid content. This study is focused on the microorganism inhibition performance of aspartic acid based copolymers. Results showed that inhibition properties increase with increasing citric acid content. Characterization of obtained copolymers was carried out with the help of infrared absorption spectra (FTIR), x-ray diffraction (XRD), differential scanning calorimetry (DSC) and thermo gravimetric analysis (TGA). The antibacterial activity of copolymers against bacteria like E-coli, Bacillus and pseudomonas was investigated. The copolymers showed excellent antimicrobial activities against three types of microorganisms. Overall studies indicated that the above copolymers possess a broad wound dressing activity against above three types of bacteria and may be useful as antibacterial agents.     

Solvent-Free Polymerization of l-Aspartic Acid in the Presence of d-Sorbitol to Obtain Water Soluble or Network Copolymers

l-Aspartic acid was thermally polymerized in the presence of d-sorbitol with the goal of synthesizing new, higher molecular weight water soluble and absorbent copolymers. No reaction occurred when aspartic acid alone was heated at 170 or 200 °C. In contrast, heating sorbitol and aspartic acid neat or with ammonium hydroxide gave a mixture of water soluble and insoluble copolymers of polysuccinimide and sorbitol. In the presence of phosphoric acid, sorbitol aspartate ester copolymers having both water soluble and highly swollen gel components were formed. These results indicate that polysaccharides such as sorbitol can readily react to form copolymer ester/amides with aspartic acid and such copolymers may have utility as biodegradable water soluble and swellable polyampholytes.