Characterization and environmental implications of nano- and larger TiO(2) particles in sewage sludge, and soils amended with sewage sludge

Titanium dioxide (TiO(2)) is the most extensively used engineered nanoparticle to date, yet its fate in the soil environment has been investigated only rarely and is poorly understood. In the present study, we conducted two field-scale investigations to better describe TiO(2) nano- and larger particles in their most likely route of entry into the environment, i.e., the application of biosolids to soils. We particularly concentrated on the particles in the nano-size regime due to their novel and commercially useful properties. First, we analyzed three sewage sludge products from the US EPA TNSSS sampling inventory for the occurrence, qualitative abundance, and nature of TiO(2) nano- and larger particles by using analytical scanning electron microscopy and analytical (scanning) transmission electron microscopy. Nano- and larger particles of TiO(2) were repeatedly identified across the sewage sludge types tested, providing strong evidence of their likely concentration in sewage sludge products. The TiO(2) particles identified were as small as 40 nm, and as large as 300 nm, having faceted shapes with the rutile crystal structure, and they typically formed small, loosely packed aggregates. Second, we examined surface soils in mesocosms that had been amended with Ag nanoparticle-spiked biosolids for the occurrence of TiO(2) particles. An aggregate of TiO(2) nanoparticles with the rutile structure was again identified, but this time TiO(2) nanoparticles were found to contain Ag on their surfaces. This suggests that TiO(2) nanoparticles from biosolids can interact with toxic trace metals that would then enter the environment as a soil amendment. Therefore, the long-term behavior of TiO(2) nano- and larger particles in sewage sludge materials as well as their impacts in the soil environment need to be carefully considered.     

Impact of agglomeration and different dispersions of titanium dioxide nanoparticles on the human related in vitro cytotoxicity and genotoxicity

The published results on nanoparticles cytotoxicity and genotoxicity such as titanium dioxide nanoparticles (TiO(2) NPs) are inconsistent, and often conflicting and insufficient. Since different parameters may have impact on the toxicity results, there is need to lay stress on detailed characterization of NPs and the use of different testing conditions for assessment of NPs toxicity. In order to investigate whether dispersion procedures influence NP cytotoxicity and genotoxicity, we compared two protocols giving TiO(2) NP dispersions with different stability and agglomeration states. Detailed primary and secondary characteristics of both TiO(2) NP dispersions in culture media were carried out before toxicological testing; TK6 human lymphoblast cells, EUE human embryonic epithelial cells and Cos-1 monkey kidney fibroblasts were used to assess cytotoxicity (by trypan blue exclusion, proliferation activity and plating efficiency assays) and genotoxicity (by the comet assay). DNA strand breaks were detected by the alkaline comet assay. DNA oxidation lesions (especially 8-oxo-7,8-dihydroguanine, 8-oxoG) were measured with a modified comet assay including incubation with specific repair enzyme formamidopyrimidine DNA glycosylase (FPG). The TiO(2) NPs dispersion with large agglomerates (3 min sonication and no serum in stock solution) induced DNA damage in all three cell lines, while the TiO(2) NPs dispersed with agglomerates less than 200 nm (foetal serum in stock solution and sonication 15 min) had no effect on genotoxicity. An increased level of DNA oxidation lesions detected in Cos-1 and TK6 cells indicates that the leading mechanism by which TiO(2) NPs trigger genotoxicity is most likely oxidative stress. Our results show that the dispersion method used can influence the results of toxicity studies. Therefore at least two different dispersion procedures should be incorporated into assessment of cyto- and genotoxic effects of NPs. It is important, when assessing the hazard associated with NPs, to establish standard testing procedures and thorough strategies to consider the diverse conditions relevant to possible exposures.     

Translocation of Sb and Ti in an undisturbed floodplain soil after application of Sb2O3 and TiO2 nanoparticles to the surface

The pore water transport of antimony and titanium, applied as nanoparticles (NPs), was studied by spiking stable suspensions of two different nanomaterials on the surface of an undisturbed floodplain soil. For preparation of stable dispersions, two different strategies were followed. (i) Comparable to those used in industrial applications: titanium dioxide nanoparticles, with an average diameter of 99 nm, were prepared by high-energy ball milling in water, whereas for (ii) antimony trioxide (Sb(2)O(3); average diameter 121 nm) a dispersing agent (sodium salt of poly[(naphthaleneformaldehyde)sulfonate] (pNFS) in water) was used. The upper 17 cm of a floodplain soil (river Rhine, Germany) was sampled using the minimally invasive sediment or fauna incubation experiment (SOFIE? two compartment cell; 3 l volume each), which preserved the pore system of the soil. The cells were equipped with 450 and 100 nm filter probes at different depths providing a non-invasive sampling of the pore water. The pore water was sampled at different times (T = 0, 24, 48, 96 and 196 h) and analysed by inductively coupled plasma quadrupole mass spectrometry (ICP-QMS). Sb and Ti were transported via the pore water of the floodplain soil to a depth of 14 cm, corresponding to the maximum cell depth. The highest Sb concentration in the pore water was detected after 24 h at a depth of 5.5-8 cm. Although the spiked concentration was higher for Ti than for Sb, the total Ti concentration in the pore water of the spiked cell was lower. This indicates a stronger agglomeration of TiO(2) NPs or a more intensive interaction of Ti with the solid matrix and a faster transport of Sb towards deeper soil layers. The results show that metal(loid)s from metal oxide NPs are transported in the soil pore water and, hence, have the potential to act as the source of contamination of deeper soil layers after soil surface contamination.     

Toxicological assessment of TiO2 nanoparticles by recombinant Escherichia coli bacteria

Rapid and efficient methods to assess nanoparticle toxicity are desired in current research. Here we showed that Escherichia coli labeled by green fluorescent protein can be a good model bacterium for assessing acute toxicity of TiO(2) (about 50% inhibition ratios after 135 min exposure). Sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) revealed that TiO(2) nanoparticles (NPs) can influence certain protein expression in the recombinant bacterium, and the obvious effects in repressed expression and elevated expression were observed in 30/40, 10/20 μg mL(-1) treated cells, respectively. However, the GFP expression (27 kD) was not influenced by introduced TiO(2) NPs. The change of the fluorescence intensity may be caused by the damage in folding and chromophore formation of the GFP post-translational modification due to generated reactive oxygen species. Furthermore, TiO(2) NPs at higher concentrations decreased their toxicity because of aggregation. 20 μg mL(-1) humic acid (HA) introduced to the medium can decrease the fluorescent inhibition owing to the barrier of steric hindrance it provides between NPs and cells.     

Spatial distribution, electron microscopy analysis of titanium and its correlation to heavy metals: occurrence and sources of titanium nanomaterials in surface sediments from Xiamen Bay, China

Titanium nanomaterials are likely to sink into sediments in substantial quantities due to their wide use in a number of applications for decades. To assess the potential environmental consequences, a better understanding is required of the occurrence and sources of titanium (Ti) nanomaterials in sediments. In this research, we provide the first report of the Ti concentrations and the morphology and composition of Ti-based solids in surface sediments from Xiamen Bay, China. Results indicated that the anthropogenic Ti concentrations in the surface sediments from Xiamen Bay reached approximately 2.74 g kg(-1). Ti nanomaterials could be found in sediments with elevated Ti concentrations, which were often aggregated to a few hundred nanometers (<300 nm) and were composed of several spherical particles, less than 50 nm in size, that were made solely of TiO(x). However, Ti particles (approx. 300-700 nm) could be also found in sediments with lower Ti concentrations, which were presumably components of the natural clay mineral kaolinite. Ti nanomaterials could be easily distributed in sediments associated with elevated levels of organic matter and preferentially attach to those sediments with elevated fine fractions. As a sentinel, or tracer, for other nanomaterials, the field-scale investigation of Ti nanomaterials would contribute to increasing our knowledge on the behavior of engineered nanomaterials in an aquatic environment.     

Evaluation of the effects of acid precipitation in eastern Canada using the raison system

Evaluations have been made of the key chemical factors in the aquatic effects upon surface waters due to acidic precipitation in eastern Canada. The region of Canada east of the Manitoba/Ontario border was divided into 22 aggregates and assessments of inorganic and organic ion chemistry appraised relative to sulphate deposition rates and distributions. Aquatic sensitivity is largely dominated by the concentration, distribution and magnitude of SO _inf4 ^sup2- (sulphate) deposition and by the prevalent geology and derived soils found in each aggregate. The RAISON system provided an adaptable and highly flexible platform to evaluate interactively, multiple data sets of divergent characteristics. Attributes usually associated with geographical information systems are significantly augmented by quantitative numerical and stochastic capabilities that were used extensively in this study.     

Effects of aqueous suspensions of titanium dioxide nanoparticles on Artemia salina: assessment of nanoparticle aggregation, accumulation, and toxicity

Aquatic stability and impact of titanium dioxide nanoparticles (TiO₂ NPs, 10–30 nm) were investigated using Artemia salina. Acute exposure was conducted on nauplii (larvae) and adults in seawater in a concentration range from 10 to 100 mg/L TiO₂ NPs for 24 and 96 h. Rapid aggregation occurred in all suspensions of TiO₂ NPs to form micrometer size particles. Yet, both nauplii and adults accumulated the aggregates significantly. Average TiO₂ content in nauplii ranged from 0.47 to 3.19 and from 1.29 to 4.43 mg/g in 24 and 96 h, respectively. Accumulation in adults was higher ranging from 2.30 to 4.19 and from 4.38 to 6.20 mg/g in 24 and 96 h, respectively. Phase contrast microscopy images revealed that Artemia were unable to excrete the particles. Thus, the TiO₂ aggregates filled inside the guts. No significant mortality or toxicity occurred within 24 h at any dose. Lipid peroxidation levels characterized with malondialdehyde concentrations were not statistically different from those of the controls (p?>?0.05). These results suggested that suspensions of the TiO₂ NPs were nontoxic to Artemia, most likely due to the formation of benign TiO₂ aggregates in water. In contrast, both mortality and lipid peroxidation increased in extended exposure to 96 h. Highest mortality occurred in 100 mg/L TiO₂ NP suspensions; 18 % for nauplii and 14 % for adults (LC₅₀?>?100 mg/L). These effects were attributed to the particle loading inside the guts leading to oxidative stress as a result of impaired food uptake for a long period of time.     

Representativity of a Mid-lake Surface Water Chemistry Sample

A mid-lake sample is the conventional sampling strategy used in lake chemistry monitoring programs. Hence, addressing the question of how representative a mid-lake sample is of in-lake conditions is important for interpreting changes in long-term monitoring programs. Our hypotheses were that; (i) the location of a sampling site within a lake will affect its representativity and (ii) a mid-lake sample could be considered representative of average surface water physico-chemistry. We focused on the surface water chemistry in 34 Swedish lakes. To obtain a wide diversity of lake types, the lakes were classified according to mean depth, water residence time, and three main ecoregions. Two sampling seasons were selected, representative of high and low biological activity and stratified and non-stratified conditions, respectively. Ten samples were collected in each lake. The mid-lake samples differed significantly from the nine remaining samples in less than 4% of the total number of two-sample t-tests performed. Samples collected close to lake inlets differed from the other samples more often than samples collected in the central parts of the lakes. We concluded that the location of a sampling site within a lake may affect the sample's representativity of lake water chemistry, and that a mid-lake surface water sample could be considered representative of surface water chemistry.     

A novel high-frequency groundwater quality monitoring system

High-frequency, long-term monitoring of water quality has revolutionized the study of surface waters in recent years. However, application of these techniques to groundwater has been limited by the ability to remotely pump and analyze groundwater. This paper describes a novel autonomous groundwater quality monitoring system which samples multiple wells to evaluate temporal changes and identify trends in groundwater chemistry. The system, deployed near Fresno, California, USA, collects and transmits high-frequency data, including water temperature, specific conductance, pH, dissolved oxygen, and nitrate, from supply and monitoring wells, in real-time. The system consists of a water quality sonde and optical nitrate sensor, manifold, submersible three-phase pump, variable frequency drive, data collection platform, solar panels, and rechargeable battery bank. The manifold directs water from three wells to a single set of sensors, thereby reducing setup and operation costs associated with multi-sensor networks. Sampling multiple wells at high frequency for several years provided a means of monitoring the vertical distribution and transport of solutes in the aquifer. Initial results show short period variability of nitrate, specific conductivity, and dissolved oxygen in the shallow aquifer, while the deeper portion of the aquifer remains unchanged—observations that may be missed with traditional discrete sampling approaches. In this aquifer system, nitrate and specific conductance are increasing in the shallow aquifer, while invariant changes in deep groundwater chemistry likely reflect relatively slow groundwater flow. In contrast, systems with high groundwater velocity, such as karst aquifers, have been shown to exhibit higher-frequency groundwater chemistry changes. The stability of the deeper aquifer over the monitoring period was leveraged to develop estimates of measurement system uncertainty, which were typically lower than the manufacturer’s stated specifications, enabling the identification of subtle variability in water chemistry that may have otherwise been missed.     

Effects of selected metal oxide nanoparticles on Artemia salina larvae: evaluation of mortality and behavioural and biochemical responses

The aim was to investigate the toxicity of selected metal oxide nanoparticles (MO-NPs) on the brine shrimp Artemia salina, by evaluating mortality and behavioural and biochemical responses. Larvae were exposed to tin(IV) oxide (stannic oxide (SnO₂)), cerium(IV) oxide (CeO₂) and iron(II, III) oxide (Fe₃O₄) NPs for 48 h in seawater, with MO-NP suspensions from 0.01 to 1.0 mg/mL. Mortality and behavioural responses (swimming speed alteration) and enzymatic activities of cholinesterase, glutathione-S-transferase and catalase were evaluated. Although the MO-NPs did not induce any mortality of the larvae, they caused changes in behavioural and biochemical responses. Swimming speed significantly decreased in larvae exposed to CeO₂ NPs. Cholinesterase and glutathione-S-transferase activities were significantly inhibited in larvae exposed to SnO₂ NPs, whereas cholinesterase activity significantly increased after CeO₂ NP and Fe₃O₄ NP exposure. Catalase activity significantly increased in larvae exposed to Fe₃O₄ NPs. In conclusion, swimming alteration and cholinesterase activity represent valid endpoints for MO-NP exposure, while glutathione-S-transferase and catalase activities appear to be NP-specific.     

Watershed Nitrogen and Mercury Geochemical Fluxes Integrate Landscape Factors in Long-term Research Watersheds at Acadia National Park, Maine, USA

This paper is an overview of this special issue devoted to watershed research in Acadia National Park (Acadia NP). The papers address components of an integrated research program on two upland watersheds at Acadia NP, USA (44° 20′ N latitude; 68° 15′ E longitude). These watersheds were instrumented in 1998 to provide a long-term foundation for regional ecological and watershed research. The research was initiated as part of EPA/NPS PRIMENet (Park Research and Intensive Monitoring of Ecosystems Network), a system of UV-monitoring stations and long-term watershed research sites located in US national parks. The initial goals at Acadia NP were to address research questions about mercury, acid rain, and nitrogen saturation developed from prior research. The project design was based on natural differences in forests and soils induced by an intense wildfire in one watershed in 1947. There is no evidence of fire in the reference watershed for several hundred years. We are testing hypotheses about controls on surface water chemistry, and bioavailability of contaminants in the contrasting watersheds. The unburned 47-ha Hadlock Brook watershed is 70% spruce-fir mature conifer forest. In contrast, burned 32-ha Cadillac Brook watershed, 4 km northeast of the Hadlock watershed, is 20% regenerating mixed northern hardwoods and 60% shrub/rocky balds. Differences in atmospheric deposition are controlled primarily by forest stand composition and age. The watersheds are gauged and have water chemistry stations at 122 m (Cadillac) and 137 m (Hadlock); watershed maximum elevations are 468 and 380 m, respectively. The stream water chemistry patterns reflect, in part, the legacy of the intense fire, which, in turn, controls differences in forest vegetation and soil characteristics. These factors result in higher nitrogen and mercury flux from the unburned watershed, reflecting differences in atmospheric deposition, contrasting ecosystem pools of nitrogen and mercury, and inferred differences in internal cycling and bioavailabilty.     

Requirements for developing a regional monitoring capacity for aerosols in Europe within EMEP

The European Monitoring and Evaluation Programme (EMEP) has been established to provide information to Parties to the Convention on Long Range Transboundary Air Pollution on deposition and concentration of air pollutants, as well as on the quantity and significance of long-range transmission of pollutants and transboundary fluxes. To achieve its objectives with the required scientific credibility and technical underpinning, a close integration of the programme's main elements is performed. These elements are emission inventories, chemical transport modelling, and the monitoring of atmospheric chemistry and deposition fluxes, which further are integrated towards abatement policy development. A critical element is the air pollution monitoring that is performed across Europe with a focus not only on health effect aspects and compliance monitoring, but also on process studies and source receptor relationships. Without a strong observational basis a predictive modelling capacity cannot be developed and validated. Thus the modelling success strongly depends on the quality and quantity of available observations. Particulate matter (PM) is a relatively recent addition to the EMEP monitoring programme, and the network for PM mass observations is still evolving. This article presents the current status of EMEP aerosol observations, followed by a critical evaluation in view of EMEP's main objectives and its model development requirements. Specific recommendations are given for improving the PM monitoring programme within EMEP.     

Examples of the role of analytical chemistry in environmental risk management research

Analytical chemistry is an important tier of environmental protection and has been traditionally linked to compliance and/or exposure monitoring activities for environmental contaminants. The adoption of the risk management paradigm has led to special challenges for analytical chemistry applied to environmental risk analysis. Namely, methods developed for regulated contaminants may not be appropriate and/or applicable to risk management scenarios. This paper contains examples of analytical chemistry applied to risk management challenges broken down by the analytical approach and analyte for some selected work in our laboratory. Specific techniques discussed include stable association complex electrospray mass spectrometry (cESI-MS), gas chromatography-mass spectrometry (GC-MS), split-flow thin cell (SPLITT) fractionation and matrix-assisted laser desorption time of flight mass spectrometry (MALDI-ToF-MS). Specific analytes include haloacetic acids (HAA9), perchlorate, bromate, triazine degradation products, metal-contaminated colloids and Cryptosporidium parvum oocysts.     

Occurrence and behaviour of nonylphenol and octylphenol in Nanming River, Guiyang City, China

Occurrence, variation and behaviour of nonylphenol (NP) and octylphenol (OP) were studied in surface water and groundwater in Guiyang, Guizhou Province, southwestern China. Discharge of wastewater from Guiyang City was the main source of alkylphenols (APs) entering the aquatic environment. The concentrations of NP and OP in river water ranged from 40 to 1582 ng L(-1) and from below the lowest limit of detection (LOD) to 67 ng L(-1), respectively. NP and OP were also detected in groundwater. Both NP and OP exhibited spatial and temporal variations in river water and groundwater. It was found that concentrations of NP and OP in river water was low upstream and dramatically increased downstream, and higher concentration of NP was found in winter compared to that in summer. Proportions of NP and OP were trapped by suspended particulate matter (SPM), which accounted for 7.6-50.0% and 3.4-25.6% of their total concentration in the river water system, respectively. Seasonal changes in water flow were responsible for the temporal variations of APs. To determine the behaviour of APs along the river, a mass balance equation based on chloride was used. The results showed that a mixing process was the predominant factor to determine upstream APs concentrations; while the discharge of wastewater controlled the concentrations of APs downstream. Considering the adverse effect of APs on organisms, combined effect modeling was used to assess the toxicity to fish. It was found that the predicted mixture effect for APs in river water on fish vitellogenin induction was low upstream and medium downstream, respectively.     

基于声音监测的鄱阳湖典型湿地鸟类多样性及对人类活动的响应

在鄱阳湖典型人控湖汊芳兰湖湿地选取人类活动差异性较大的两个区域分别设置鸟类声音监测点,利用声音采集仪器Song Meter SM4收集长时间序列的鸟类声音数据,基于声音处理程序包将声音数据转化为具有生态学信息的声学指标,用以表征鸟类多样性特征,并定量分析鸟类多样性与人类活动之间的关联性程度.结果表明:鸟类声音数据为WA...     

南京市城区环境空气中总悬浮颗粒物的源解析

应用受体模式的化学质量平衡法（ＣＭＢ）,对南京市城区７个环境监测点环境空气中的总悬浮颗粒物（ＴＳＰ）进行污染源的源解析,得出４类主要污染源对ＴＳＰ的平均贡献率,建筑尘３９．８％、煤烟尘２５．７％,土壤尘１９．２％,冶炼尘１．８％,同时,对该市城区的地面尘也进行了源解析,表明地面尘与环境中ＴＳＰ的构成相近。     

Dynamic Hydrologic Simulation of the Bear Brook Watershed in Maine (BBWM)

Bear Brook Watershed in Maine (BBWM) consists of a pair of research watersheds, East Bear Brook (EBB) and West Bear Brook (WBB). Years of research and observations have shown both watersheds have high similarity in geographic and hydrologic characteristics; a simple comparison of hydrographs from these two watersheds further substantiates this similarity. The Object Watershed Link Simulation (OWLS) model was developed and used to simulate the hydrological processes within the BBWM. The OWLS model is a 3-dimensional, vector-based, visualized, physically-based, distributed watershed hydrologic model. Simulation results not only provide a close examination of hydrologic processes within a watershed, but also dynamically visualize the processes of flow separations and Variable Source Areas (VSA). Results from flow separations suggest that surface flow from riparian area is the predominate component for the flood rising limb and that macropore flow from riparian area dominates during the falling limb. Soil matrix flow has little effect flood period but is a persistent contributor to base flow. Results from VSA visualization demonstrate 3-D dynamic changes in surface flow distribution and suggest that downstream riparian areas are the major contributing area for peak flow. As water chemistry is highly relevant to the flow paths within a watershed, simulations have provided valuable information about source of stream flow and the water migration dynamics to support the study of watershed chemistry in the BBWM. More specific linkages between the chemistry behavior and the dynamic hydrologic processes should become the next simulation effort in the watershed study. There are many questions that are critical to watershed chemistry studies like: which flow component (surface flow, macropore flow, soil matrix flow) predominates during peak flows? How do the flow components distribute during a flood event? How do flow contributions differ between these two watersheds? Which portion of the watershed contributes the most to the peak flows? These questions remain unknown from previous observations and only can be addressed with a physically-based distributed model.     

Ozone Destruction on Solid Particles

Ozone (O3) is an important constituent of the Earth atmosphere, either stratosphere, where it has a beneficial role to protect Earth's surface from harmful UV-B radiation, or troposphere where it is considered an air pollutant. We investigated the ozone destruction on solid particles of natural or anthropogenic origin as: silica-gel, pollen, coal fly ash, titanium dioxide with different specific surface (s) and sodium halides (NaCl, NaBr and NaI). The experiments were conducted in a fluidized bed reactor with elevated ambient concentrations of O3 (100 ppb) employed. The results indicate that the destruction of O3 depends upon: sample quantity (silica-gel with equal s), sample surface (TiO2 with different s) and chemical composition (coal fly ash comparative to wood ash). Interesting results were obtained with sodium halides: no effect on O3 concentrations was detected with NaCl, NaBr shows a certain destruction, while NaI removes completely O3 from the air stream. In the experiments with NaI doped NaCl, the destruction of O3 was dependent on NaI quantity.     

飞行时间二次离子质谱法在一次污染过程中PM2.5表面组分分析中的应用

团簇离子源的发明和使用,使飞行时间二次离子质谱（TOF-SIMS）法成为材料表面化学分析越来越重要的手段,TOF-SIMS法的主要测试功能包括表层质谱、化学成像及深度剖析3种。采用TOF-SIMS法对一次污染过程中的大气细颗粒物（PM_2.5）的表层进行检测,得到了PM_2.5表面成分的质谱及成像信息。结果表明：PM_2.5表层存在多种金属离子,通过扫描电子显微镜能谱仪的形貌与飞行时间二次离子质谱仪的成像亮度分析可知,K⁺、Na⁺、Mg²⁺响应强度相对较强,含量较高;通过原子吸收光谱仪进行金属离子定量可知,2018年11月4日和12月24日的K⁺、Na⁺、Mg²⁺的平均质量分别为1.809 5、0.443 8、1.526 2 mg;从形态分布上看,PM_2.5表面烟尘集合体含量较多,其次为燃煤飞灰、矿物颗粒和超细未知颗粒;PM_2.5表层的有机物离子C_xH_y片段也较多,经过m/z的测试数据进一步确定,表明颗粒物表层含有大量的脂肪烃和芳香烃;除此之外,还存在含N、O、S等的有机物和无机物。     

Determination of six anti-infectives in wastewater using tandem solid-phase extraction and liquid chromatography-tandem mass spectrometry

A rugged and specific method based on tandem solid-phase extraction and liquid chromatography-tandem mass spectrometry for the determination of anti-infectives in raw sewage and wastewater plant effluents was developed. Analyte recoveries from spiked effluents ranged from 68 to 104%. Two specific selected reaction monitoring transitions and their peak area ratios were used to avoid false positives and confirm the presence of the targeted substances. Detection limits allowed low nanogram per litre detection (0.3-22 ng L(-1)). The method was successfully applied to real samples from the Montréal wastewater treatment plant. All the studied anti-infectives were found in the wastewater samples in concentrations ranging from 39 to 276 ng L(-1). Mean flows of anti-infectives were estimated from effluent concentrations and it was found that large amounts (>118 g day(-1) up to 830 g day(-1)) are discharged in the receiving waters of the St Lawrence River.